Giant RC Airliner BUILD | FLIGHT | CRASH all in 1 video

STL Files: cults3d.com/en/3d-model/gadge...
Propeller Wall Art: cults3d.com/en/3d-model/art/p...
RTF weight: 3,360 grams
Wingspan: 1.6m
Length: 2m
Print time: 220hrs
2kg of PLA
Thank you so much for watching!
If you like videos like this, consider buying me a coffee, it really supports me: www.buymeacoffee.com/troymcmi...
See what else I am working on: / troymcmillan_rc
/ troymcmillan_rc
#3DPrinted,#RCAirplane, #ItFlies
Bangood: www.banggood.com
2x 70mm EDFs: bit.ly/3yHmtYo (code: BGaf9c2e, US$32.99)
80amp ESC: bit.ly/2SVNc2M (code:BGHW80A，US$26.99)
6x ES08MDII Servo: bit.ly/33WoCRE (code: BGES08MDII,15%OFF)
Serov Tester: bit.ly/3oW44Ck
Other products required for this Build:
10x5x3 Magnets: amzn.to/3bzb4Pz
2x8mm Screws: amzn.to/2Tp9tpP
10x5x3 Magnets: amzn.to/3bzb4Pz
M3 Brass Threaded Heat Set: amzn.to/3zL4mAd
1mm Carbon rods: amzn.to/32lEoW2
2kg Silver PLA: amzn.to/3vmukru
XT-90 connectors: amzn.to/2T2HaOs
XT-90 Charging cables: amzn.to/3hoxhUA
10AWG wire: amzn.to/36m5ZaS
4S 5200mah Battery: amzn.to/2UvkHK8
Li-Fe Battery: amzn.to/3hqMAfp
Li-Fe Battery Charger: amzn.to/2TGJR8J
Carbon Rods: www.readymaderc.com
Banggood Summer Prime Sale: bit.ly/2Tjeukp
Saving Tips:bit.ly/3xcaIrN
RC Sale: bit.ly/3hppch3
Tools and Electronics Sale：bit.ly/3xbKy8h
This is an awesome Printer I highly recommend: www.anycubic.com/products/any...
Products Used:
3D Printers I use and recommend:
Artillery Sidewinder 3D Printer: amzn.to/396eqIp
Artillery Genius 3D Printer: amzn.to/39cA6CZ
Ender3 V2: amzn.to/2SmLOGk
Twotrees Sapphire-PRO: amzn.to/3wtNOLz
Anycubic Mega X Printer: amzn.to/3f4oS89
Fokoos Odin-5: amzn.to/3fAES06
3D Printing Filament:
ABS for motor mounts: amzn.to/3xgLI2c
ColorFabb LW-PLA: colorfabb.com/lw-pla-natural
Esun ePLA-LW:
Overture White PLA: amzn.to/3facD9A
TPU: amzn.to/2Sw3Oe8
Tools and Supplies used:
Spektrum DX6 Controller: amzn.to/3l6NFsD
Receiver: amzn.to/3j4PbK4
Battery Charger: amzn.to/3vejwfL
Charge cable: amzn.to/34lOk3q
XT60 connector: amzn.to/3iyZWnf
Assortment of 3-Pin Extension Cables: amzn.to/3l1xNYt
Z-Bend pliers: amzn.to/34mA0rt
2mm push rod ends: amzn.to/3nnjD4U
CA Glue: amzn.to/2J8EvNW
CA Accelerator: amzn.to/3fpbycz
Low-Voltage Tester: amzn.to/2Yk0A0w
Hot knife: amzn.to/3nrCwUH
Drill Bits: amzn.to/3nIJzrx
Hobby Knife: amzn.to/3eYOYJq
#11 blades: amzn.to/3vTJZ2W
Z-Bend pliers: amzn.to/34mA0rt
Build Mat: amzn.to/3vJmauw
Onboard Camera: amzn.to/3rp2OrH
Lead weight: amzn.to/3cFnzeu
All my print setting can be found in the 3D printing section of my STL files one Cults:
cults3d.com/en/3d-model/gadge...
Music:
Joakim Karud:
KZbin: / joakimkarud​
Soundcloud: / joakimkarud
Disclaimer: I am sponsored by some of the products I mention. However, all of my opinions are my own. Some of the above links are affiliate links, that does not effect the price you pay for a product, but I may receive a small commission if you make a purchase. This helps support my channel and allows me to continue to make videos like this. Thank you for your support!!

[@felinefinetessaslegacy2878]

I think the best thing about this video is the presenter staying cool over the crash. No dramatics. Just a review of what happened. You can't keep a passionate Modeler like Troy down. Onto the fix and she'll fly again. Amazing build of an aircraft. Thank you for posting it.

[@AndreasUlmer]

jah quite impressed - would not have thought that was possible with 3D print. Kudos.

[@tyronelannister9922]

If hes this far in the hobby, hes used to it

[@tasnimakter3529]

.

[@AE.rojet_aviation]

Lol

[@tommurphy4307]

its not as if there were little people on board.

[@zacapelt1234]

I think you got the order of events of the crash wrong. The edf's and ESCs would have pulled too many amps through the wires connected to the battery. The wires wouldn't have been thick enough and so got hot enough to melt the insulation, shorting the battery. That would have caused the battery to explode and the esc to shut down. This would then have shut down the receiver, making you lose signal. Up until then, it looked like it was flying great and the plane looked pretty awesome. moral of the story: use thick wire that's rated for the current (2x 80A) and make sure your battery can have a high enough C rating to power it

[@krotchlickmeugh627]

You dont know how any of this works do you

[@JustPlaneChris]

@@krotchlickmeugh627 Actually I think he does, and his theory is very nearly correct. Early on when I saw the wire harness and the length I said to myself "Not going to work well". He should have used much shorter battery leads, and dual batteries.

[@samdish]

@@krotchlickmeugh627 I've crashed 2 beautiful planes having done similar thing. But I had separate power to receiver, but bc I didn't have an rpm sensor i didn't know my motor quit early enough and It was too late when I realized and far and too low from runway and I just had to glide straight ahead into dirt and bushes. I would suggest using a better receiver too, with satellite antennas unlike that small 636A.

[@krotchlickmeugh627]

@@samdish yes theres always your set up. But i have been in it long enough to know about redundancy. If you have issues with dead sticks man best thing to do is get into thermaling a glider. I learned by pylon racing. A plane that was modified to be slick as hell and over 200mph. Is going to land at 100mph at idle. So you get her up into the patern and kill the engine. Learn the glide slope and stall tendencies. Gets you really good at dead sticks

[@calibermix8159]

@@JustPlaneChris My theory is that WRECKTRUM is pure junk and has crashed thousands of models all over the world.

[@LiftVector]

You could not have asked for a more well composed shot of the crash. Hands out in desperation (just in frame), the plane descending to it's demise and a beautiful scenic background to echo the crunch of PLA. What a fantastic production. A night to remember, haha!

[@northdownflyer]

Lots to admire about your video : from your design, build and fly skills to your willingness to show the whole story, despite the crash. Not to mention your fortitude and determination to rebuild and improve. Great example to us all!

[@PedroEsteban]

"It's part of the hobbie" This is the kind of people that enjoy life to the fullest. Great video, thank you for sharing.

[@homienat3374]

Totally agree mate good to see

[@NightRunner417]

Lol yeah you absolutely will not go far in RC unless you can take a lot of bloody noses. It's part and parcel of the hobby. It's always great if you can go out, fly at least two times, and come back without a scratch, but you have to accept that things can and will go wrong. If you can't, then you're gonna hate it. If you can, then believe me, you'll love it or I wanna know why not, lol. Especially FPV. It's truly a special experience. :-)

[@NightRunner417]

@Sig Bauer I've never seen one go off just laying there in the plane but I have seen them come close. One of mine went full on smolder festival in a crash, which was pretty inevitable, but one came down hot and puffy just flying normally. I counted myself lucky that it hadn't gone off and taken the whole plane with it.

[@kimtonn]

Totally agree

[@rickastley3536]

14:10 "WHOOP! WHOOP! TERRAIN! TERRAIN! WHOOP! WHOOP! PULL... UP! PULL... UP!" 😅 The beauty of 3D printing is in a few hours you have spare parts and ready to fly again! Nice project, man!

[@TroyMcMillan]

Haha! Exactly, I have the parts printing now ;)

[@rickastley3536]

@@TroyMcMillan😄 👍

[@SOAxZIPPER]

Is it bad if I can hear the actual alarm going off in my head just reading that?

[@christerjackson9589]

@@SOAxZIPPER Only if ur on a plane

[@Rundumsfliegen]

@@SOAxZIPPER same. im waay to much of an avgeek.

[@tesladura3085]

Absolutely incredible. Inspiring. It was incredible watching it fly. Your attitude over the malfunction and crash was as inspiring as the build and flight. Bravo.

[@clean1566]

Amazingly cool demeanor after a devastating crash. Loved the attitude! "Part of the hobby" doesn't usually come out of my mouth for a couple of hours and numerous cuss words later. Awesome build and fly! Neat that you already have files of the parts you need! Too bad I'm too old to learn that stuff. They make the foamies for old analg guys like me:-)

[@BobbyTucker]

And me, lol

[@adamflight1]

The thing I love about your videos is that even when things go bad, you’re still positive. It’s a joy to watch you and your sweet wife. So grateful to you and the way in which you compose yourself. Keep up the great work. I’ll buy you a coffee.

[@rcnfo1197]

Great job on the design and build. There's a lot to learn from this crash. The fuselage is clearly a lot stronger than it looks in the build. Just beef up your wiring, add a separate receiver battery, provide some cooling for your ESCs and batteries, replace the plastic wheels and gear with something that can absorb the shock of take offs and landings, and version 2.0 will be much better!

[@PTMG]

Yeah I'd say a battery for control surfaces and a battery for the motors

[@yongxinliu3344]

I believe there should be independent batteries for both engines, the benefit of a twin-engine aircraft is that it is still maneuverable when you lost one.

[@Kni0002]

reliable battery for controls and surfaces, and then high powered 1 battery dedicated to the engines

[@nkronert]

@@Kni0002 motor battery with auto eject in case it gets too hot 😊

[@louisfkoorts5590]

Wow! Breathtaking. At least The Pilot step away, literally unharmed. 😀 It were beautiful, everything, up until the crash. And I am not glad about. Still we could learn from it all. Thanks for sharing with us. I wish for a happy and quick rebuild. Seeing that it is so light and strong, how about a small increase in size? (I am a layman. And have no realistic idea of what it will take to obtain a "size rise".) 👋🏻🌻

[@gcat6027]

Great Job! Thank you for taking us on your build and flight journey. It was fascinating and informative. Sorry that your test flight ended badly. I guess it's how aircraft test flights sometimes end up in the full scale world. Thanks again for an enjoyable ride!

[@jonnygrowlately]

so adorable how your girl pretends like she gives a shyte

[@alexalex1251]

She likes a man with toys

[@specialfbiagent51]

The crash part is so realistic, but sadly it crashed :(. Nice Jobs though Troy!!!

[@TroyMcMillan]

Very realistic, it was pretty grim. Thank you so much though :)

[@futebolamador3531]

proving that behind the plane is safer

[@Kerber0s34]

@@TroyMcMillan It very much reminded me of the Asiana 777 that crashed at SFO complete with the wing high 180 degree spin.

[@edstar83]

The good news is he can just 3D print the parts for repair.

[@guidoarena8924]

There are two things I fear: 1. Bears 2. "Telemetry Lost"

[@gavinvalentino6002]

Bears: beets: Battlestar Gallactica.

[@Vousie]

This is why I fly with an autopilot - if you just lose signal, it'll fly back home. In this case of course, it wouldn't have helped much since he completely lost power... No amount of software can fix a major hardware issue.

[@jackmehoffer1037]

Hey, fantastic job on that. Your build was perfect. This is like real life issues a plane might encounter. Very interesting

[@jp33332]

Agreed!

[@papasplanes.956]

Hello, Old flyer here, but completely new to 3D printing after a club member showed us his ME-109. So I'm really wanting to give this a try. And my eyes want more than a small 109, but damn 220 hrs to print! Maybe I had better start small. I'll be following you as so far I like your videos. They are easy to understand. Sad about your crash, but everyone in R/C flying should understand, Never fall in Love with a plane. They WILL leave you!

[@dwaynevanmeerten3666]

Troy, you did a superb job building that A321, and she flew very well. The fact that it wasn't a complete hull loss is a true testament to your building skills my friend. It held up pretty well in the crash. You really can't do much when a battery completely fails on you.

[@RogerBarraud]

GPS, IMU and auto-land preprogrammed for the strip would help.

[@jonask.1409]

Nice, I got some Ramy rc vibes because of the selected music😆

[@pancake5830]

joakim karud

[@The-Warm-voice1359]

Check the Black box🤣🤣🤣 But you doing Great bud Awesome work 👏😊

[@davidrich6552]

gotta be such a great guy to be smiling and taking it easy after THAT LOSS. Cudos to you for showing us your build.

[@billamos5125]

After all that hard work it's great to see that you're such a good sport about losing it. It did fly beautifully, though.

[@jps99]

Troy, I'm really bummed out for you. Your design was brilliant and it definitely did fly well while it was airborne. The problem was in the power source not the plane, so don't let this get you down. I am truly impressed by your efforts in creating and building cool aircraft and opening up the field of 3D printed planes to your followers. Keep up the great work!

[@michaelbujaki2462]

3300g meant that he spent $100 on filament, but the decals and the motors are something else. At least he has the STL in stock.

[@leokimvideo]

INCREDIBLE, that crash was exactly how a huge jet niner crashed. Please crash more

[@kskdcartman8792]

he wasted his life on this project his wife left him after he abandoned his family for the last 36 months to build this plane. she took the kids... hes holding back the tears after the crash

[@ronlorn568]

@@kskdcartman8792 whered you get this info

[@mrb2917]

@@ronlorn568 from his ass, he's joking

[@ronlorn568]

@@mrb2917 lmao ma bad

[@kushtrimimeri2892]

Ihre Zwischenablage unterstützt jetzt Bilder und TextIhre Zwischenablage unterstützt jetzt Bilder und Tex

[@elektrotechnik2011]

Stunning! I find no other words for your project. Thank you so much for sharing! Keep up the good work, don't let the crash bring you bad mood. This thing is absolutely awesome...

[@brbrbrbr3305]

لا ة

[@Xailow]

You made a lot of clever design choices in making this! Very well done!

[@TroyMcMillan]

Thank you so much :)

[@iforce2d]

I was expecting it to end in a pile of dust, but it took that crash quite well. The uncontrolled glide at the end was nice and stable too.

[@TroyMcMillan]

I was really happy by how well it glided down too!!

[@rcplanesandfriends3067]

@@TroyMcMillan THAT is because of your good trimming. Nice job, she will fly again!

[@krist6074]

I can't believe you 3D printed this thing yourself and it flies like a bird in the sky!!! Congrats on that!! As for the crash, you found out pretty quickly what had happened, so maybe drill a few holes in the fuselage for air and it'll be fine next time. Thank you for sharing this video!!!

[@blooskyy7]

This is the first time I have seen 3D printing being used for RC plane builds, simply amazing!

[@benji4138]

I love the mini version of AIr Crash Investigations at the end as well! Plane looks so cool and seemed to fly really well. Be good to see v2 up in the air

[@antoniog9814]

Congrats! it looks great, but I would've gone with a light coat of paint just to conceal the fuselage section lines, purely cosmetic. Sorry about the crash, but great NTSB work figuring out the cause of the crash. At least it wasn't pilot error. :)

[@MrOner07]

Rest in peace to all the crew members inside the plane. never forget ✊🏻❤️

[@TheMagillablack]

as a fleet service clerk for American Airlines, i highly APPROVE THIS!!

[@MrWilt100]

Amazing build, I'm jealous no, I'm overwhelmed with how it all came together. Even though the end was disappointing I enjoyed watching this from start to end.

[@laynesilva7254]

Y uu

[@MEDIAWORXstudio]

Such a large model requires flaps and a separate power supply for the receiver.

[@TroyMcMillan]

I will be adding a separate power supply to planes like this in the future!

[@Sindrg1]

@@TroyMcMillan Will you be adding flaps? I really want to buy this modell but my airfield is a grass field and need to get the landing and takeoff speed down.

[@TroyMcMillan]

@@Sindrg1 For this plane I will not be adding flaps. I am rebuilding it right now to test out the landing without flaps. I also plane to test out flying it without gear for a cart lunch and belly land it on grass.

[@sotm6078]

@@TroyMcMillan Belly landing will rip off the engines again - gaurenteed!

[@David.-_-]

Yea man with all that work. Shit. Second backup battery

[@muddy250]

Nice job, shame to lose it like that. I worked in 3D modelling and print since the mid 90"s and was sceptical that this would stay together under load in flight but the way it survived that impact was impressive.

[@michaeloneale202]

This build was amazing. The flight went perfect until the battery explosion. I am currently taking flying lessons and have 30 hrs.in. Any thing to do with hobby flying is my passion. Great job.

[@tjkoker]

You might want to check your overall load on the battery in amps. Those turbo fan motors looked pretty beefy. Incredible build thought. Debris Field behind the plane after crash was kinda wicked. So realistic. Here's a coffee.Cheers.

[@TroyMcMillan]

Thank you so much for the coffee! I have watched the crash a couple times over, and looking at the debris field was definitely grim. I learned a lot of things I can apply to the next build.

[@vlweb3d]

My condolences to all of the passengers who died in that crash :(

[@thefanfilmshow]

Luckily it was reported later that they all survived!

[@dhnguyen369]

@@thefanfilmshow I though they found no servival ??? !!!!!

[@jamesjunction]

don't worry, its only the first class passengers that died. everyone else is fine

[@AirportPlaneSpotting]

@@jamesjunction 🤣

[@Jeremy.Bearemy]

@@jamesjunction serves those bastards right 😂

[@martyns398]

I was in a crash in a Cessna 172 (not serious) many years ago and can honestly say that I was more upset to watch what happened to your model plane than I was when I found myself upside down in the Cessna. The 172 broke its back after flipping over but (like yours) was rebuilt and is still flying today!

[@paolo6336]

Just stumbled across this video , never seen any of your other ones but I have a 6 year old autistic boy who’s non verbal and he was pointing and signalling to your page, we sat and watched in awe. Where did you learn all this stuff man, truly impressive. The design and build process too man, hats off. You made our morning sir

[@G__Brtz]

Plot twist: The hydraulics fluids leaked, and the aircraft became uncontrollable

[@TigersToys]

Most impressive thing I've ever seen printed. Congratulations!

[@YewDuct]

Fantastic. A totally immersive and addictive video - and sequel! Such rotten misfortune with the wiring. I think you could only have caught that by running a full battery discharge cycle with the plane anchored to the ground. Thank you for sharing.

[@petermay5273]

Thanks for the video Troy, beautiful build, shows that 3D printed models have really come of age. Sorry to see it crash like that, a real shame, can't believe how composed you were. I would have been fuming with smoke coming out of my ears. My last crash was a Hanger 9 Meridian 10cc nitro powered plane, didn't fly for 5 years after that after a string of crashes (all my own fault). Now I'm printing an Eclipson Model C to get back to flying, so thanks for your professional and informative videos. They have been a great help. Also, credit to the camera lady for being so calm and supportive.🙂

[@BrianPhillipsRC]

Very nice!

[@davidclark2702]

Amazing build! Great flight! Epic crash! You had all the highs and lows of the hobby in one project.

[@TroyMcMillan]

Exactly! The highs of it keep you going though, especially with this build

[@stormbytes]

I would probably have cried. Beautiful build though. Your work is so inspiring! I never knew what was possible with 3d printing and seriously considering getting into it.

[@huggi3s77]

За крушение - отдельный лайк нужен!) молодец, с нуля создал, жаль, что крушение произошло, но и оно было эпичным)

[@mickclitheroe8585]

Thanks for taking the time Troy to bring that video to us, a lot of work there ! Great to see how well it flew, not your fault the battery gave way and as you say “All part of the hobby” indeed we have to learn from things like this or we will get nowhere ! All the best fella from Blighty 🇬🇧

[@sotm6078]

With two EDFs you should have run one battery for each EDF. EDFs draw very high current .

[@TroyMcMillan]

I definitely learned that the hard way :)

[@bkpickell]

The amazing thing to me is that even the crash looked scale. Reminded me of the Idaho crash in a cornfield back in the 80's

[@solosailorsv8065]

AWESOME; reminds me of The Spruce Goose.... HUGE project, made from "heavy" material, proving the Design and Fab skills with ONE flight justified the entire Adventure !! Mission Accomplished !! I hope the FAA took note that the passenger compartment was still intact , and the faulty Lithium battery was WAY oversized (to scale) of FAA limits, LoL !

[@Lipo-man]

Wow you really stepped it up for this project. Amazed how well your design worked - really didn’t think a single walled EDF airliner could work anything like this well. Shame you had the problem with the current draw but a second one (or this one repaired) should work as well as this did before the meltdown. Congratulations - a brilliant project!

[@TroyMcMillan]

Thank you so much! I did a lot of strength testing and prototyping for this single wall design, and I was so happy that it held together this well. Parts are on the printer now for the rebuild

[@TheBonsaiZone]

Good to see it in the air and flying great!

[@litezone4045]

Yeah!

[@builderbbob]

Not for long

[@builderbbob]

@ALEXANDAR NIKOLAY DRAGANOV oh yay

[@FurkanDincerov]

Hi

[@FurkanDincerov]

Hello

[@rayduke7433]

What an amazing build. You’re extremely accomplished builder. I’m not sure I could have had that great of an attitude if I were in your shoes.

[@toxik420]

He even did the crash investigation NTSB style 😂😂😂 kudos man

[@segpie]

Boy, alot of time went into that build. Nice job designing, printing and assembly. Really nice looking bird. The crash was unfortunate but no one was hurt which was good. We learn by mistakes. I still feel bad for you.

[@TroyMcMillan]

I appreciate it, yes exactly thankfully it was just a great learning experience!

[@ShahriarFarkhan]

I loved watching this go together and it broke my heart when it crashed. What was amazing to watch is your attitude. Looking forward to your next build.

[@Watchdoc65]

Man, that is amazing to be able to build a cool little jet like that! Bummer that the battery caused the control failure. Hope you get it back in the air soon. Thanks for sharing!

[@tuxokc]

Now we all know to stress test the final wiring plan on the bench before installation and the maiden flight! Thanks for sharing.

[@phippsa3]

That is incredible. I'm starting to believe that 3d printing is the future of rc modelling

[@stuweFPV]

Congrats on a magnificent design and build Troy!! Probably the best 3D printed design I've ever seen! Sad to see you crash. My guess would also be the too small wires before the split and the XT60. They are only designed to hold 60A and you draw close to 130A at take-off. Use the XT90 and thicker wires if you rebuild. The rest should be fine. good luck and happy flying!

[@TroyMcMillan]

Thank you so much for the tip! I am learning so much from this build. Planning on rebuilding it and I will be switching these things out next time!

[@stuweFPV]

@@TroyMcMillan You're doing just fine. step by step. EDF is tough and overall draw has to be considered all the way thorough. But you're a exceptional 3D designer and your projects are inspiring! Keep up the good work!!

[@ewapiwonska6415]

🛬🛫I love planes

[@quintenbarnes4955]

Me to 🛩️

[@DavidEssel-nm5fy]

Me to

[@TheoWerewolf]

I'm not usually into watching build videos, but this was amazing. The design and construction was just incredible, And yeah, even though I knew it was coming (it's in the title after all) when it went down, it was like "OH NOOOOO!". Thank you for sharing this!

[@rdcabal]

I was hoping it would recover the signal.

[@fleabitis]

What an amazing survival story. In scale, the engineering clearly outperformed actual contemporary aircraft. It would be interesting to see what a quarter scale model of a current production aircraft would do in the face of a common accident scenario.

[@97ABDE]

You forgot speed dude

[@wspepsilon]

Extremely impressive. My only gripe is no retracts. Hopefully you design an upgrade to incorporate retracts for those that want that functionality. I loved all the other design elements though. Great job!

[@WarJakEnterprises]

Good thing it didn't have retracts because the loss would have been much greater. It's good to build an experimental, work all the bugs out, then deck it out with all the goodies.

[@nos06]

That crash was spectacular, not gonna lie

[@bolita642]

The modularity of the main fuselage is a very good idea because adding more or less of them can make different variants like the a318 or a319

[@TroyMcMillan]

true!

[@spaul85vin-husky]

Waiting for NTSB report ) Glad no one hurts

[@stokbr5]

When additional length is needed it should always be added between the ESC and the motor. Extending the battery leads can result in voltage spikes. If absolutely necessary they can be extended but for every 2 inches of length you need 1 extra capacitor at the ESC.

[@DlcEnergy]

I was thinking the crash was going to be due to a bad landing. Just checked the follow up and i'm amazed how well you was able to land it. It makes me more amazed with real airplanes at how they can even get those off the ground and land them back safely and keep them fueled for so long.

[@KumaFall]

Mad respect for the cameraman growing himself to size and showing us what the top of a plane looks like

[@user32455]

Wow what a cool building process, you've inspired me to try something similar one day! Flew like a beaut and great attitude when it ended in such an epic way.

[@beefyiceman94]

Sorry for your loss, but that was the coolest RC crash I've seen, very scale!

[@Dolphinvideoproductions]

Incredible job building it, looks like it’ll be back flying soon. Congratulations on an awesome job

[@nextai2003]

KUDOs for the huge effort and making it fly so smoothly, it looked and sounded like a proper jet. A shame a bad battery can wreck all of it .. you should show the manufacturer what the consequences of poor parts are. Maybe they can sponsor a rebuild and build back their image.

[@Lozzie74]

The battery was not at fault. The follow-up video shows the wiring melted due to being too small for the job. The builder acknowledges this. Check your facts before condemning a supplier.

[@nextai2003]

@@Lozzie74 I checked my facts well, thank you for the suggestion. The battery is swollen, can't you see that even in the follow-up video ?!

[@Chilternflyer]

Awesome work Troy. I'm surprised how well it survived that impact!

[@jkflorida]

I’d be running a LiFe Rx pack in a plane that nice!

[@TroyMcMillan]

going to look it up now 😅

[@jkflorida]

@@TroyMcMillan It gets rid of your internal BEC for power. So if that ever happened again you would still have control of the plane. ESC and main lipo could burn but you would still have control of the jet, just no power from the EDF.

[@TroyMcMillan]

@@jkflorida I am ordering one right now!! Thank you for the tip!

[@juancarlosmonsalveb.6581]

What a great work Troy. From the very beggining, in every phase, excelent !!

[@usselpasoable]

props to the pilot for steering the plane away from heavily populated prairie dogs.

[@jtveg]

Great build. 😉👌🏻 I've never seen a fully 3D printed model plane before. It seems that your wiring harness (motor leads) overheated due to high current and lack of cooling. Once the insulation melted the wires shorted causing the battery pack to fail and consequently lose all power and control. You can avoid full loss of control by using a seperate power source for the receiver and servos. Or just use much thicker wires.

[@tyronelannister9922]

Moral of the story, use back up recievers on big models

[@saraheart2604]

You got every part of that right. Now the Builder/Pilot knows it too. Are you a pilot, or does your picture just make you look that way?

[@jtveg]

@@saraheart2604 Nah, I'm not a pilot, just an enthusiast in all things aeronautical, electrical, and science and engineering.

[@renelioeanjie1485]

Well done Bro. Learn and improve., we need a "ramy rc" this side of the the Atlantic 😁😁😁😁😁

[@rondegroot1508]

Respect! You did an incredible job! So sorry for the crash. Best vid on YT, the love that goes into the project.

[@cameronplays5667]

He was so chill when the play crashed he didn’t even make any mad noises or anything and even at the end he was smiling

[@tommyyates4639]

Sorry to see this loss, that was a beautiful plane and you are to be commended for the design.

[@terryhayles5786]

First time I've watched your channel and I am impressed with your build and enthusiasm,its great that you can just 3d print the parts again but it still requires a lot of work and effort,congratulations on the flight it looked awesome until the battery blew up,top job

[@CS-ry9np]

And that’s why they said you’re more likely to survive a plane crash if you sit more towards the rear! You either pay for luxury or you pay for safety. Great video!

[@Shadow0fd3ath24]

the fact it flew at all and is that big is cool but the fact its 3d printed and will print on my Ender 3 also REALLY makes it awesome! Just needed thicker wires on the ESCs and maybe more air to them in the fuselage. Glag it faired well and didnt burst into flames lol

[@BrixLu]

What a great video..And such a precise build! Love how it flew, hated that it crashed :( R.i.p. Lotta respect for how much work you put into this.. Amazing!

[@stcthekid]

What a shame. Looks like the wire melted first which caused the battery to short. what gauge wire was the battery plug into?

[@wrathofatlantis2316]

Impressive how strong it was built... I like the place they flew it as well: Very safe and with beautiful skies. I even liked the engine sound and the way it flew... The owner deserved better luck.

[@timrb]

I didn't think it was that emotionally invested and I knew what I was getting into but heart sunk when it crashed.

[@montanaharkin]

Great build. Keep it up! I'm sure you thought of this, but it's always good to have the controls on a separate circuit than the main flight battery. Next time!

[@azzir325]

The flight was "proof of concept." Just figure out what happened to the power system and print out another. All in all, good job and good attitude. Congrats!

[@TroyMcMillan]

Thank you, exactly! Learned so much and I have parts printing already

[@motoworx9673]

Bang.... Good! I have a pile of their lipos in the backyard

[@viumeanderson2064]

this crush was really fun dude. made the new version better.

[@travisk5589]

This was almost like watching The Miracle on the Hudson.

[@AGPullen]

I work with AA A321's on the daily so this was really cool to see! Great build, sucks it crashed though 😥. BTW: if that's supposed to be a Neo, all the AA ones have a 400 tail number up to 434 using AA, AN, AL, and UW. All the 600 tail Airbus's are 320's.

[@TroyMcMillan]

Thanks man, Ya I was doing some research for the tail number and could not find out what number to use so I just used a date 6/14 what when I started the build.

[@tdkleffman]

Very nice bird, but its a CEO since the engine mimics the looks of the IAE V2500. 🙂

[@auhsojyihst9440]

The way you printed your fuselage part was smart, That way you can just remake the damaged part. If gear were up, that could have kept the noise up during final gladding.

[@janatlmb2770]

the magnetic door is really cool, besides everything aelse of course. The crash was brutal. It flew like a charm.