GIVEAWAY 57 Chevy gets NEW Floor Pans and Braces - She Could be YOURS ABSOLUTELY FREE!

Well as you guys know I pulled this 57 Chevy BelAir out of a farmers field a few weeks ago. We got it running and driving but far from road worthy. Rust repair is the part of this hobby that I HATE the most, especially rusty floors. So naturally I attacked the rotted floors first while I was still excited about this Hot Rod. I sourced out a set of replacement floor pans and body braces to make the job a little easier.
These Tri-5 Chev's all seem to rust in the exact same way. There really is no easy way to do the repair but I think I have a good system going. Through trial and error I've decided that cutting out the floor and repairing the braces from the top side is much easier. It does require more floor repair, but I prefer working on top of the floors instead of lying on my back.
After a few days of welding in the heat, the floors look good as new! I'm a big believer in making this car safe so it can be driven/enjoyed anywhere! Now with the boring ugly job out of the way we can move onto something way more exciting!
This car is being given away at 57 000 subscribers so make sure to tell a friend! We're making LOTS of progress but still have a ways to go.
Make sure to click subscribe and turn on the bell while your here.
Send me your JUNK:
DD Speed Shop
Po box 42041
1881 Portage ave
Ferry Road RPO
Winnipeg, Manitoba
R3J 3X7
DD SPEED SHOP 57 Chevy Giveaway
How do I enter and who is eligible?
-All channel subscribers are eligible to win. As a subscriber you are automatically entered into the giveaway.
- No purchase necessary
How is a winner chosen?
-Once the subscriber count meets 57,000 and the car is completed the contest will be closed, all names will be entered into a dram and one name will be randomly selected
If I win, how do I get my prize?
-The winner is financially responsible for picking up/shipping the prize in compliance with Canadian law. There will be a skill testing question.
Additional Information
KZbin is NOT a sponsor or affiliated with this giveaway. Please review the KZbin community Guidelines: www.youtube.co....
The approx. value of the 57 Chevy at the time of draw will be $5000.
The car will be given away free of all liens, in AS-IS condition with NO warranty
DD SPEED SHOP will not be retaining, storing or selling any personal information. Any personal information acquired is to be used for the sole purpose of contacting and communicating with the giveaway winner.
The winner is responsible for following the contest rules/guidelines in accordance with their Countries/States/Provinces/Territories governing law
All subscribers are eligible excl Quebec, Canada

[@mikedeclerck1421]

Well done sir. Dad had a 150 '57 when I was a teen. Loved that car. Would be proud to ride your project. Will be a watcher from now on.

[@ZeroFoxENT]

I think the thing i like about your channel the most is that you make it look so easy and you approach everything so nonchalant. No drama, nothing extra to sell us on a project. Keep that up. I really enjoy that.

[@DDSpeedShop]

Just filming the junk id be doing anyways haha

[@kenworthless5708]

A measure of a man is the quality of his work when no one is forcing him. I have a lot of respect for you. Someone is going to be very grateful.

[@DDSpeedShop]

Thanks Ken!

[@kevinmeahan4603]

No matter who wins the awesome car when you are done with it. Should be proud to own it. Thank you for all your hard work and time and money you have put into it. Thank you very much for your dedication to the project you are doing for all of us and the lucky winner.

[@chuckswafford9179]

57 is my dream car ...i love this channel...learn so much and I'm 50 yrs old...working on my 70 nova from a wheelchair and walker..slow and easy...can't just lay down and give up...hot rods for life you guys keep on keeping on

[@magicalselena]

Dude, You really are doing a great job at bringing this 57 back to life. Hopefully whoever gets the 57 will appreciate all the time and work you have put into this car. The floors look really good.

[@chicagovasko]

WTTST.

[@buckeyejim2989]

Excellent tip on walking away from welding.👍 Looking good Dan. Thanks for sharing.

[@Wooley689]

It's good to see someone with your skill level doing this, won't be any question on the structural strength.

[@Beandiptheredneck]

I’d bet that’s why he’s showing it all on video, that way you can see that he’s doing a good job of it

[@patriciawilson9848]

I watch your videos love it the 57 chey Bellaire I hope I win great job

[@757optim]

Extending the old 4-door's life is an act of kindness. Tri-fives forever.

[@alanwilliamson9350]

You're a hell of a good dude to give it away to a lucky subscriber.

[@DDSpeedShop]

I try

[@BigMac-ph6ls]

Love the progress in the amount of time , thanks for caring enough to make it road worthy. You are a good guy and a hell of a fabricator.👍

[@matthewlanger7026]

I'm impressed with all the work and effort you are putting in this car to give it away

[@DDSpeedShop]

Hey my name is on it. Gotta have some pride in it right?

[@matthewlanger7026]

Hell yeah 😎 nice work my wife will not let me get a classic vehicle until I get a really good deal or $1000000 in the bank so I better start saving

[@tomwaybs4054]

Nice job Dan, I like the way you take the time to do it right and make it safe! Someone will be very lucky to get this car for FREE after all the hard work and money you put into it, good luck making it to 57K subscribers, you deserve it! Peace ✌️

[@DDSpeedShop]

Thanks tom!

[@rodneybrown1696]

Ugh! After a long day at work it’s nice to come home and watch the builds. Nice scoop up on all the floor pans and braces.

[@johnshader4287]

Love how you tape days of work... and give us one video. Lots to view. Thanks.

[@KensStuff]

you remind my of myself years ago. working all day at a job and come home and work out in the garage till midnight or 1:00 am. always moving. i didn't have the hair... i enjoy all your videos that i've seen so far. i started watching on the door delete. Keep um coming just don't burn yourself out.

[@DDSpeedShop]

Thanks Ken!

[@stephensaasen8589]

Whoever wins this car will really appreciate the effort you put into these projects. You really care about the bodywork and looks like you build it to last. I'm much the same way. Do it right and nobody should have to do it again. Looks great!

[@miketowtruck13]

Dan bro great big whats up awesome work from brandon manitoba you give off SOOOOO much insperation brother your work ethic is amazing love all your vids keep em coming

[@one2869]

I swear with each video, it just makes me want to see the next one even more.

[@DDSpeedShop]

Haha thats the point!

[@Baddog6873]

I wish I was still young as you and work all day and play all night. Haha Those were the days, the best days! I love reliving them by watching you apply your skills.

[@thomasparker5208]

I gotta say I think it is awesome that you are replacing that rotted floor and braces. You are really giving that car a chance to be on the street again, and maybe survive anther 60 years.

[@DDSpeedShop]

Yup. Keeping them alive is the most important part.

[@waynegouin939]

Awsome video. You got the floor repair job down pat! You're determined. I'd be in the he pool!

[@jonandrew52]

Hope you're staying hydrated. Thank you for all your hard work.

[@Baddog6873]

It's only 102 degrees here but it's a dry heat.... Makes the tea taste better. The car looks MUCH BETTER!

[@berkeleypowell4453]

Most people giving away a car wouldn't do all that work they would give it away just as is but You are doing a Fantastic job my friend making it Safe and road worthy and I Love it

[@ericwright6568]

Looking good she's going to be a sweet ride which the little woman was still alive to watch with me we both have soft spot for 57

[@dipe277]

Thanks for workin' sooo hard on my new '57. And for FREE!!!!!!

[@fullsizecars4174]

That's a really good tip. I always wait 20 minutes after welding to make sure nothing is on fire.

[@donpittman1917]

I really love watching your videos they are very informative, and I have the itch to get into an old car again

[@DavidJones-hl5om]

Awesome give away 57 Chevy 4 door yeah..been watching since the 55 conversion to a 2 door. Great builds keep going.

[@mattfry3705]

I’ve been a welder fabricator for the last 30 years so I can appreciate what it’s like when it’s hot like 90° good job brother

[@DDSpeedShop]

Thanks man! Its damn hot

[@billygriffin9817]

Matt FRY Amen brother don’t know how many Lincolns and Miller’s I’ve burned into the ground and all my welding was always in the field mostly young guys now wouldn’t even know what a 6010 or 7018 It is all about but you’re right he does do a good job on the floorboards in these conversions

[@edhawk4737]

Looking good you are doing a nice job making it safe and it looks nicer with a clean floor.

[@garymccord4277]

I feel the pain of your having to do the kind of work you are doing and the temperature you are doing it in. I know that you are young but drink plenty of liquids and take care of your health. This 57 chevy is going to be a super nice ride for someone and they will have your videos to brag about how much work it took to make it that nice. Like the videos you do, super nice work and effort going to someone who wins this car.

[@cliffordholland2233]

H o w do i enter to win

[@carystewart3166]

I wish I had the knowledge you have it awesome to see you work and you enjoying doing what you do God bless you and all you do

[@retireddriver16]

Yep my wife was conceived in January of 57 in the back seat of her dads 57 chevy and born in October she love ❤️ to have that car

[@larrycaldwell3493]

I have fell in love with this 4 door. If I could afford it, I would just try to buy it. The wife would look so cool picking up the grandkids up at school in it.

[@DDSpeedShop]

Tell some friends. Gotta make the 57k subs

[@michaelyoho4848]

Great job on the floors. Thank you pegtowncustoms, I'm anxious to see what they look like when your done with them.

[@leonardtaylor6526]

@@DDSpeedShop A person really can not say enough good things about the work this guy does . It is just awsome that Guys this young have this love for old cars . Some of the other Guys that do this on youtube are awsome also . This Guy has a style of his own . Love the Patina .

[@robert930tn]

Enjoying all the effort you are putting in to the car it is going to look great running thru the hills of Tennessee moonshine country.

[@DDSpeedShop]

For sure! Tell your friends so we make the 57k subscriber goal.

[@henryescat1104]

I wish I had a neighbor/friend like you to help and hang out with..

[@daveross5314]

Love the 57 but can't wait to see the 56 getting done. Dan you do amazing work and I hope I get to meet you one day.

[@larryborkstrom3580]

I was surprised to see the floors were in the shape before considered it was sitting in a field as long as it had

[@flufflypoon6527]

I'm a quadriplegic, being a 4 door she's going to work perfect w/my chair. Thanks for getting her ready for me! :)

[@thomaswright20]

You are making great progress! Keep the videos coming.............

[@teddymullins3706]

You've done a great job on my floors it's amazing how much you look like my son you could have been his twin I told you about him sadly he passed a little over a year ago I truly love watching your videos keep up the great workI'm looking forward to the 57 in my driveway I plan on taking it to the next level

[@intofordracingful]

Better job done than I've seen supposedly professional shops do. Its nice to see and know you take pride in projects like this and do quality without a rotisserie.

[@DDSpeedShop]

Thanks buddy!

[@clementevaldez1271]

You are just too generous and very well experienced with the cars you work on....the one person that will be lucky to win the '57 is getting the best part of the deal....FREE !!!!!!... thank you for all your hard work...C. Valdez

[@DDSpeedShop]

For sure! Tell your friends so we make the 57k subscriber goal.

[@toddfisher3812]

You remind me when I was younger still build hot rods all day long I like your show how stuff should be

[@DDSpeedShop]

Thanks Todd!

[@bobkroupa8445]

Working in that heat is a bear- I hate it when temps get close to 90's and humid- thanks for all your hard work on my '57-

[@DDSpeedShop]

Thanks for watching Bob!

[@TOMMYBIGTIME]

57 Bel Air is my dream car. My grandma had one and she passed it down to my uncle. When I was a tiny kid we'd go cruising in it and my uncle would have me standing by the dash controlling the wolf whistle. He totalled it. I've wanted a 57 since then

[@DDSpeedShop]

Share the channel around and you'll have a chance to win one for sure

[@satisfacts7225]

You are doing an awesome job on this ole time capsule man, I’m waiting for my headers to come in the mail today for my 1985 gmc k2500 Sierra classic 😂

[@vilstef6988]

Dan-really love the channel. Your commentary on the rebuilding/refurbishment of the frames and floor are engaging. It's always a pleasure to hear a craftsman who knows what they're doing.

[@DDSpeedShop]

Haha im jist winging it. But thanks so much!

[@vilstef6988]

@@DDSpeedShop Winging it with a background of knowledge and experience. Gettin'er done, with work which will hold up. If I get the car, I'm going to have a party and show some of your videos working on the old girl. That would be sweet!

[@kevintucker3354]

I’m looking forward to meeting you guys and helping in your garage for a couple of days when I go to pick up this old Chevy. Good times coming up!!

[@my357mags]

Floors are looking good! Not a fun job but so satisfying when it done! Thumbs up!

[@michaelfiaschetti772]

Your skill level is incredible, great channel thanks for all you do!

[@normansuttorp2154]

You obviously take a lot of pride in what you do. Someone I hope that wins this car will really appreciate what you did.

[@melissacombest9358]

The family and I are really enjoying your videos and the cars , keep up the good work man

[@lucasstiles8012]

I love watching these repairs getting done. Chance of the hard work belonging to me, that's extraordinary.

[@moreschmoo]

Good luck!!! Tell your friends so we can give this baby away!!

[@lucasstiles8012]

@@moreschmoo I had a discussion with my friend yesterday, about where could he even park it if he did win. I'm dragging people in, you betcha

[@erniecollette8149]

Love the work you’ve been doing to all of the tri fiv’s !! Especially the four door to two door conversion , excellent job !!! 👍

[@94jimmy5]

Nice solid repair, Dan. It is much more function than form. Structurally solid is the key. Once the interior is back in=minty.

[@clementevaldez1271]

This is going to be a good safe well repaired and awesome ride...you are doing great job on the 57 and I will be praying for all the people who subscribe and hope that the lucky one appreciates your efforts... thanks for all your hard work...Clem.

[@DDSpeedShop]

Thanks for watchin!

[@darrylcampbell4411]

Hey man. Had to pause the vid at 14 minutes to say I really am impressed by your enthusiasm dedication and motorvation. youare truly inspirational to young and old hot rodders and street machine enthusiasts. Rock on Dude. Love it....right.. back to your vid.

[@johnchaffin5494]

Always loved the tri-five, my dad drove a 56 Chevy two tone black and white. After breaking his back he drove it with the hand brake.

[@shanewright6958]

It's coming along nicely. Another great video 👍👍🇨🇱

[@carltongonzalez7889]

Wow that's awesome it's coming together so nice. I'm enjoying watching your progress 👍

[@sbortz75]

I hope who ever gets this appreciates the hell out of all the love and work u put in !!!!

[@mikehenry3377]

For a Guy whose not into welding a lot your doing a bloody good job

[@richardperkins6132]

Looks like the 57 giveaway is going great. Keep up the good work and the updated videos on your progress. An again, what a great thing you are doing by giving it away to someone who may not be able to afford an old school hot rod. The only thing is that when you get this one done there will many more to follow, if you wish to keep on going. You've started a great thing. An you can't stop now. Take it as far as you can go with it. Don't make the 57 be the only one. 57,000 subscribers is just a starting point. Imagine having, 57,000,000,000. Then all the cars become free to you. Then you really become a channel all around the world. The question is just how big do you wanna be with it. Great job your doing on the 57. Keep on trucking with it. An as always safe an happy hunting/building the old hot rods. There out there just waiting to be found and put on the road again.😁👍👍

[@DDSpeedShop]

I'd love to build old hot rods and give em away. A modern day Elvis haha. Hopefully we can keep the channel growing.

[@joebooth8585]

Great Work 👍🏻 you’re my kind of mechanic everyone needs a friend like you!

[@angeldiaz5849]

So glad to see some appreciation for the 4 door. My favorite!

[@ndeep45]

Nicely done Dan .. I'm still tripping on how nicely this is coming along... Psst.. you know I want it....

[@cnkilts]

Hoping you get there. That’s a sweet Chevy and hope someone who appreciates her wins.

[@DDSpeedShop]

For sure! Tell your friends so we make the 57k subscriber goal.

[@cnkilts]

DD Speed Shop I will try and get some more subs. I let them know they can ride in my new 57 Chevy if they do. Lol.

[@alanwoodcock3218]

Words can't describe how much you're putting into this. You certainly are talented Dan. Your attention to detail to make this car right, for whoever it's next owner will be. You put such great effort into whatever you do. Would love to win this beauty, but if it meant to be it will. Keep cool Bud, thanks for the great vids...

[@stevegibson7062]

The lady is looking better and better. Great repair job on the floor. It sure would look nice cruisin' the Blue Ridge Parkway in N.C. (hint, hint)

[@f-8floyd]

Hey for seats u should put white bench seats with red stitching. That would look sweet in that car. Good job.

[@brianschafer2621]

just amazing D! I feel the heat all the here in Missouri. After working on a tractor all day outside yesterday I had to take a day off to day and chill. We will get you there to 57 thousand subscribers somehow. You deserve at least a 100,000 subscribers in my opinion. You the man.

[@DDSpeedShop]

Haha thanks buddy! I'm.working on it.

[@barryrobinson5887]

Tri fives have always been my favorite along with C-10s you’ve got that stuff covered, enjoy watching your videos.

[@henrygibson1530]

The floor panels look great. Keep up the good work someone will get a nice car.

[@berniebaumcratz7344]

Doing amazing work on the car.. looking great

[@martinmayhem7122]

Really enjoying this Dan! I still say it is pretty awesome of you two to give this car away to someone! Looking forward to the sponsor reveals, and more work on this 57! Good stuff!!

[@DDSpeedShop]

Thanks martin

[@robertnovotny4588]

Getting my Chevy ready ,glad to see someone with experience putting new floor pan in. Can't wait.

[@ezerod1858]

Hi, you perform a nice floor and inner rocker repair; that is the most difficult and underestimate work on a DIY car restoration. The winner will appreciate that.

[@brentmclovin9332]

Hey Dan. I appreciate all the work you’re doing to my car. Even if I don’t win I enjoy it very much. It has been rather cool here on Vancouver Island. But it is great weather for working. Cheers

[@scotttracey3748]

Great job Dan with my new floor pans lol can't wait to bring it home.

[@DDSpeedShop]

Tell some friends. Gotta make the 57k subs

[@candelriomorales2756]

sweet. You look so nice when we all tell how to do the same thing to my 1966 GMC short white box

[@jearladams6017]

I am not a 57 fan but I know there are a lot of them out there so good luck to them all.

[@cyngen05]

Great job man. I love restoration vids and your knowledge blows me away.

[@DDSpeedShop]

I'm just winging it haha

[@darrylcampbell4411]

just finished watching. awesome job man. those floors look sweet as. Go soak in your pool dude . with a cold one or two. YOU deserve it.

[@DDSpeedShop]

Thanks buddy!

[@Iann128]

Dan, for someone that says they don't like rust/sheet metal work you do some nice work. Can't wait to see it done. If I were to win it would be cool and I'd drive it everywhere! :)

[@allanperry6507]

Still hopeful that u do a 2 door conversion .🙂Huntsville Ontario Canada 🍁🖐

[@Beandiptheredneck]

Hey that’s cool! I’m down by Niagara Falls. I love coming up to your area 👍

[@swamppy4880]

Professional job. You do Good work,Dan. Thanks for taking the time out of your busy schedule. If we lived in Canada,you would work on my vehicles. Keep up the great work.

[@DDSpeedShop]

Thanks Richard!

[@swamppy4880]

Anytime Dan. You do fantastic work.

[@harleyironhead7090]

Awesome job getting that jewel ready to come home with me. She is gonna be a real beauty.

[@DDSpeedShop]

For sure! Tell your friends so we make the 57k subscriber goal.

[@fernhoppertimberworks8037]

I love the diamond tuck door panels . I have always had a thing for 57 Chevy s.

[@dollahdave]

I remember my dad came home with a brand new "57 4-door,I was 9 then.I Remenber the leopard upholstery. In 1967 I bought a 2-dr. 210 someone had put in a 348. I didn't know a 283 transmission,etc would bolt up to the 348 after I blew the trans.Good old Chevrolet interchangeability.The old days! I bought that car for $300.Blue 210 with white fins.3 on the floor,hurst pistol grip shifter.

[@mopower57]

If I was to get the 57 I would leave it a 4 door and make it a family hot rod. Maybe a mini tub and a tunnel ram. Leave the patina for a while and just enjoy the ride. Keep turning thise wrenches my freind.

[@jeffreyn.greene6233]

Got those floor pans looking good! Wish I could weld like you do great metal work budd. Love the 57

[@jiveturkey365]

Nice work! Looking forward to seeing the giveaway happen!

[@DDSpeedShop]

Tell some friends. Gotta make the 57k subs

[@sinz71]

Floor looks great. you're getting much nicer weather than we are out West but I'm sure you'd appreciate some of the rain to cool down your garage.

[@leeparker5087]

Dan u do awesome work on cars I enjoy watching your videos you explain things well on what your doing 😎

[@DDSpeedShop]

Thanks!

[@outoftime6143]

I have been looking forward to watching you work.

[@Nova.1971]

Excellent job anyone should be happy with the repairs....I will be a great car for someone to receive absolutely FREE!!!!

[@charlesguess1276]

Appreciate all your doing on our (hopefully mine) 57, take care don’t overdo look forward to next vid