Gktech Stainless Steel Braided Teflon ABS Delete Kit - Install

[@GarageBuiltMr2s]

Excellent! Thanks Officer Dan!

[@barbaratodd1288]

This would have made my life so much easier last week

[@statusleds6317]

Man. Videos like this sell product so fucking well. Just purchased. Thanks!

[@JdougKnight]

Is this available for a 88 Chevy truck?

[@christianbaez1280]

Can I do this on my 2009 Mitsubishi Lancer 2.0 ES automatic trans??

[@iamthemaninde]

Awesome video. Thank you 🙏

[@MrByrd1988]

What’s the Torque Spec for the Banjo Bolts that seal against the brake master cylinder. ?

[@parkd240]

tight

[@limitlessdrifting471]

Super easy to watch video guys, thanks for uploading corona free videos!

[@gktech]

Thanks for the support dude, that is the last thing we want to spread!

[@sugoi4983]

Please make an ABS delete kit for the NA miata

[@spiritdrift6207]

Solid video 👍🏾

[@JD-oh1kb]

THIS is how you youtube 🤣

[@ghosthacker1541]

Do you guys sell the short line with 2 male sides individually or possibly as a 2 pack?

[@darkstarprojekt]

On the R34 GTT, my friend has ABS sensors built into the hubs. Seeing as we went and purchased your whole wide angle kit, and are forced now to get rid of ABS, what do you do with the sensors that go to those front hubs? Please help us!

[@mitsuracer87]

Throw them away?

[@darkstarprojekt]

@@mitsuracer87 Its what I ended up doing. Now I have to remove the dash to remove the light from behind the ABS on the dash. One thing leads to the next thing. I am slowly getting angry.

[@rx7519]

Can I buy the commentary?

[@azurescen]

Can you make the kit for NB MX5?

[@mr.mkmuffen6936]

I'm removing my abs on my s13 does this kit work with my set up. I'm struggling to follow how the lines will match up since you use an s14 in the video

[@gktech]

If unsure contact us directly VIA the website or our Facebook page. The team can assist!

[@harmanbaidwan8578]

is this kit is legal i mean certified? can u plz help before i buy tnku

[@hectorcalvo6456]

nice exelent

[@gktech]

Thanks dude!

[@hariss1364]

Maybe l'm wrong but normally all non-abs cars have a regulator for the rear brakes...whith the delete kit the car will have the same braking power on all over the wheels or no? Thanks

[@gktech]

No sorry, all OEM brake master cylinders regulate internally which automatically splits the brake bias front to rear, so you are good to go!

[@hariss1364]

@@gktech very well! Thank you

[@peterstgo6620]

Hi: These kit came for a 96 C1500 GMC Sierra ?

[@gktech]

Sorry they do not! Just for the vehicles listed in the description!

[@sk8seddon]

Hey gktech are you guys sure the rear port on master goes to front brakes? On non abs Masters the 2 ports on the front go to the fronts and the rear port is rear brakes. Why would this change to the abs master?

[@gktech]

Hey dude! Yes, we are sure, the ABS vs non ABS master cylinders are different internally and it is just based off Nissans design unfortunately!

[@shahlorenzo4723]

Hello... Can i buy this for Mitsubishi triton???

[@gktech]

Sorry, we don't have them.

[@verginsergin]

Can you make a kit for the 2004-2011 Mazda RX8?

[@gktech]

It's nothing we have plans on doing, sorry.

[@samfryer3396]

Will the abs light be on the dashboard after the install?

[@gktech]

It will yes

[@konguitowhitexd2734]

This will fit a gx100 toyota chaser 1996 ?

[@gktech]

We cannot confirm fitment on the Toyota chassis.

[@dantehart5278]

Does this kit work with the r32 GTR as well?? Definitely deleting the abs

[@gktech]

Yes, we can confirm that they do fit the GTR!

[@dantehart5278]

@@gktech awesome!!

[@johnnyz1781]

"fit" is a very relative statement apparently.

[@LuisBaza]

does this work on a 2003 g35 sedan?

[@gktech]

It does not, we don't have an ABS solution for the G35.

[@leeshepherd3899]

How would I go about plumbing a hydro into this set up?

[@gktech]

If you are running an in-line setup, all lines and fitment is the same, except for the line that runs from the rear brake line port to the block on the chassis rail. That line needs to be replaced with the inline setup!

[@BXCLIFFx]

So it definitely won't fit the 300zx Z32 also; I looked at the description already.

[@gktech]

Hey dude, No sorry, they have a completely different ABS setup, however, we do plan on developing an ABS unit for the Z32 chassis. You are welcome to send us an email at [e-mail] so I can put you on the waiting list!

[@abramalvarado4977]

Wait so will it not work with a z32 master on a 240sx hatch?

[@sunking73]

Proportion valve?

[@gktech]

We don't believe it's required for S/R chassis.

[@silviaclassics4260]

The question is why u delete the abs🧐😂

[@gktech]

It is unreliable in drifting application.

[@SR-fx5sm]

1:52 hahah

[@SR-fx5sm]

1:30 who dat