Gktech Z33 350z G35 V35 Super Lock Front Knuckles - Install

[@gktech]

Sorry guys from 7:50-7:56 AND 9:25-9:28 should read - Torque to 135Nm (100 ft-lbs)

[@jacobgoyeau]

THE GLIZZ MASTER

[@lcn2snipe]

I have the super lock kit. I understood absolutely nothing about these knuckles..... I WANT

[@sask350z]

Lol 😂😂😂😂😂 love the bud light jokes lol definitely earned my business... Good to know you guys are not woke and not left wing And the hotdog lol great example keep up with these kinds of videos they are awesome

[@lunarxvibez3758]

Really wish yall mad dual calipers on the drift knuckle being that most people are gonna be using a dual caliper set up.

[@gktech]

These are front knuckles, all of our rear knuckles use dual calipers.

[@lunarxvibez3758]

@@gktech ya know I was really dumb for commenting that I’m not sure what I was thinking 😂🍻

[@thewrapgod6221]

@@lunarxvibez3758this made my night

[@SmoophDrift]

@gktech I'm assembling my kit now but I'm using V1 lower arms. I'm using their max length. What camber degree should I have initially?

[@SmoophDrift]

@gktech I have an 06 that has the 33mm swaybar. The thicker ones. My wheel should be 18x8+38 and I have 10mm spacer. Tire scrubs in swaybar. I may put thicker spacer. I also have to find a workaround for the V1 lower arms fun stopper because it may be on different place than on V2, is it?

[@mk900mohammed3]

Dose the g37-370z need this cuz ididnt find it in ur store?

[@Ssengel69]

I need dis

[@gktech]

Available now!

[@actualevents4621]

How much do these knuckles push the wheels out, if any?

[@gktech]

It would depend on LCA length, if unsure please email the team at [e-mail] and they can assist further!

[@c19975]

How much camber should i run with this kit?

[@gktech]

We have a wheel alignment guide on the product page, which can be seen in the link in the description or on the website. If you get stuck though feel free to email us at [e-mail] and we can take it from there.

[@Andrew_Thrift]

Mmmm Red love juice, tasty

[@08corollaxrsswap88]

When is the G37 knuckle coming out

[@gktech]

It's still in the design phase so will be a fair bit of time unfortunately, I can add you to the waiting list if you'd like.

[@ChiMotive113k]

To get full 70 degrees of angle should I remove bump stops?

[@gktech]

If you have adequate wheel and fender clearance, yes.

[@ChiMotive113k]

@@gktech I do but I can’t seem to get that full angle and I remove bump stops but I have no alignment yet do you think that might be the problem?

[@jessemedina776]

I just installed mine it feels pretty tight to turn the knuckle by hand is this normal?

[@gktech]

Until the bearings wear in it can be a little tight in the air, under the weight of the car is different.

[@jessemedina776]

@@gktech awesome thank you I was just worried I did something wrong 😂

[@Visually_Verified]

👀

[@jonsgarage8054]

What size wheels I've tried 4 different sizes and rub on all of them 🤦‍♂️

[@gktech]

Best used with: 17x8,5+40 18x9+40 19x9,5+40

[@jonsgarage8054]

@Gktech awesome thank you what about tire size for 18s

[@gktech]

@@jonsgarage8054 We use 235/40

[@jonsgarage8054]

@Gktech thank you got some more info from you guys through email im rubbing at full droop need to see if it goes away once I have a load on the suspension

[@alecisurman1]

yee first comment 😱

[@EthanDrifts]

So how much locktight?😂

[@gktech]

..... All of it

[@reelizt]

wisefab or bust...