Very good! You saved a lot of money! I have a leak from my sending unit on the left side but I will have to remove the ring on the fuel pump also as the lines connect to the right side. Where did you get the tool to remove the ring? Thanks again.
@clearwaterkoifish94544 жыл бұрын
Wayne Hendricks .Hello there. I am working on my 2008 Gl450. The key I just bought and he also bought it is off amazon. Here is the link Fuel Pump Module Spanner Wrench... www.amazon.com/dp/B07T87NXX8?ref=ppx_pop_mob_ap_share Glad I could help. Good luck with your fix.
@waynehendricks81874 жыл бұрын
@@clearwaterkoifish9454 Thank you! The job is done. No leaks. I didn't have any problems with settings after reconnecting the battery cable. The only message I got was for the sound but then the box was disconnected at the time I was doing a leak check.
@reynaldomorillo62713 жыл бұрын
How you know the fuel pump is bad and what is the symptoms ? I want to know for my gl320
@TheRealKingVictor3 жыл бұрын
• The starter will take a second longer to turn on / Or misfire and sound weird. • Doesn't feel like your car can go as fast, as it probably did. • And number one reason is the car wont turn over. It'll keep trying to turn on for 5-7 second and then stop.
@Einstune5 жыл бұрын
if you cut the power wouldnt you loose the setting on the front passenger seat and have to have dealer re calibrate it? i had that problem the SRS light came on... i see you have that SRS light too. so maybe dont cut the power... i will not cut the power for sure, cause im not working on anything that is power related.
@waynehendricks81874 жыл бұрын
I thought I would lose settings when I removed power to the battery but when I reconnected the power everything worked fine. I have a 2010 MB ML350 Bluetec.