Glenn DeLaune Demo - Boss GT-100 Programming Tips

[@robertwalker6874]

10 years old, yet still so very useful. Thanks amigo!

[@benlloydarmitage6827]

This guy is an absolute godsend !!! Best and most informative GT100 instruction videos on here ! Well done Glenn !!! You are the BOSS 🤘🎸😊

[@GlennDeLauneOfficial]

Yes the effects are stellar.

[@GlennDeLauneOfficial]

Yes that was one of the bug fixes in 1.04 I believe. If you press the CTL button the Accel will be highlighted, on the right screen under "Func" turn the knob all the way to the right until you see LED On/Off. Now the light will turn on.

[@GlennDeLauneOfficial]

Because if you use these things in what they can "4 Cable Method" which is hooking it up the the FX loop of an amp and the amp input at the same time you can have certain things hitting the input of the amp and other things like time based FX going to the FX loop which is after the amps gain stage. That's the advantage of being able to move things around in the FX chain. It's just like using traditional pedals.

[@GlennDeLauneOfficial]

Absolutely I would recommend it for gigging. I am using it live at least 2 to 3 times a week.

[@kevinfender1]

best guy on the net for explaining stuff sound man.. thanks glenn

[@TheAxeman2112]

Glenn I was checking out the Gt-100 cause i have every boss pedal known to man and i was thinking about downsizing. Anyway I was blown away when i heard "Changing Seasons". I have a few songs that are very similar. I just wanted to tell you how great that song sounds to me. You know when you hear or play something and something like the melody gives you goosebumps. Keep up the good work with your music and the great tutorials. From one musician to another Your awesome dude!!!!

[@GlennDeLauneOfficial]

Thank you Eric

[@GlennDeLauneOfficial]

Ha, thanks for listening (and watching). Those background tracks are form my album "Fusion III"

[@GlennDeLauneOfficial]

Very easy to do. First press the system button and scroll to the Phrase Loop block. On the right screen set the pedal function to OFF. The press the CTL/EXP button and scroll over to an assign, set the Source to P. Loop pedal, turn the assign ON and set the Target category to whatever effect you want.

[@GlennDeLauneOfficial]

You can use the assigns to assign the tap tempo to the Accel or Looper pedal.

[@GlennDeLauneOfficial]

Well as far which is better, that depends on the application. Both the HD's & The GT's have strengths & weaknesses. Which one is better should be up to you and the way you would use the device. Both are top notch products and you can't go wrong with either one.

[@retesmania]

always making good new videos!! i really learned from your videos a lot man....thanks!!

[@GlennDeLauneOfficial]

Thank you Dave, yes at the under 600$ price range I have to say for me, the GT-100 is tops right now. Although I don't have a digitech RP so some may disagree but I am using the GT-100 for Live concerts, small and large venues and studio work and it really performs well.

[@GlennDeLauneOfficial]

No you don't have to cycle through them. You set them up to have the same pedal trigger them all at the same time. For example, My lead boost has a 20db volume jump, 20db delay level jump, EQ Mid boost and Delay Level Feedback increase. All at the same time when I press my lead boost pedal. I show all of this in the video. Just follow along with it.

[@GlennDeLauneOfficial]

That's a good question Darren, I have discovered recently that it is best to have the FV at the very End of the Chain right before the Digital Block. That way when you have aq patch with some gain on it you can reduce the volume without affecting the gain of the amp.

[@GlennDeLauneOfficial]

Thanks for watching

[@GlennDeLauneOfficial]

Just checking. Sometimes the easiest thing gets overlooked. I guess the next thing would be to make sure you are properly connected. Guitar > GT-100 guitar in GT-100 effect send > Amp front input GT-100 effect return > Amp FX Send GT-100 L Mono output > Amp FX Loop return

[@GlennDeLauneOfficial]

yes i believe there is a way. You would have to put all of the FX in the GT-100 into each amp block. A or B and go L&R out to your amps. That way everything that is in amp block A in the GT would go out of the L output and everything that is in amp block B in the GT would go out of the right output.

[@GlennDeLauneOfficial]

No there is not a 12 string simulator. There is an acoustic simulator though. It works pretty good. That is located in the FX1 & FX2 categories.

[@GlennDeLauneOfficial]

Yes this does have a great sounding "whammy" octave that can be assigned to a pedal and the harmonizer is pretty darn good. there are some videos of Rob Marcello demonstrating this.

[@kingeagle5045]

Hi Glenn again !! Thanks for anawer!!! I just heard Your reverbnation tracks And Ohhh man i love Your music And the Way You play And perform !! I spent the lást night flying with Your music !!!! You got a new fan for ever !!!! Thanks a lot for bring me joy And beautiful music into my life !!!! Cheers man !!!! Saludos amigo gran guitarrista!!!!

[@GlennDeLauneOfficial]

Thank you very much Sir.

[@GlennDeLauneOfficial]

Yes that is called "Manual Mode". I you press on the bank up & down pedals together the unit will go into Manual Mode. There you can assign different FX to all of the pedals and use it like a traditional stomp pedal board.

[@GlennDeLauneOfficial]

First go to the Boss website and download & install the drivers for your Boss unit. Also while you are there download the Boss Librarian and install that after you install the drivers. Then hook up your GT-100 to your computer with USB and turn it on. Your computer should recognize the GT. Open Librarian and at the top of the window under "setup" make sure your Gt-100 is selected. This will enable you to load and save your sounds to your computer.

[@GlennDeLauneOfficial]

That depends on what you would be using it for. Do you play live?? do you use an amp or go direct to PA.

[@johnlovell1640]

Wow, thats a quick response and thanks for the tip! Also huge Rush fan myself and always looking at ways to re create that Lifeson sound! True story. I saw Geddy standing in the doorway outside my work in London... funny think is I was actually watching Rush 'Clockwork Angels live' on my computer, glanced up and there he was!.... I was checking if this was a hidden extra on the DVD that actually brings the man to your door!

[@retrojoeman]

Thanks Glenn . Keep up the good work & thanks for sharing the knowledge ...

[@Bunkie112]

Thanks for the quick reply, Glenn! I will try that.

[@GlennDeLauneOfficial]

Hi Tim, no not at the same time. You can only have 1 effect on FX1 & FX2 going. You can't have 2 FX at the same time on FX 1 & FX2

[@GlennDeLauneOfficial]

Yeah the GT-100 Librarian is basic and it's just good for saving & loading your patches. There will be a detailed editor soon though. If you google GT-100 Floorboard Editor you can find out about it.

[@GlennDeLauneOfficial]

Doesn't Mac have an unzip program? If not then I should offer a Mac version but how?

[@fjw3277]

Hy Glenn youre the best. You Show me exatly that what i Looking for. Before i used the Boss GT-10. Now i'm use the GT-100. I found it not so easy like the GT-10. But thanks again, youre the Best. Dear Franky

[@GlennDeLauneOfficial]

Thank you very much

[@GlennDeLauneOfficial]

What amp are you using? Your S/R Block is ON right?

[@GlennDeLauneOfficial]

Yup I agree, they should have kept the CTL1 & CTL2 labeling and that light should come on. I can't figure out why they did that.

[@MontyDeane]

Hi Glenn. Thanks for the killer patches. The gilmoure stuff is just awesome. Being that your the experienced one on gt-100, I want to use this for live gigs but when I switch patches, one might be really loud and the other might be low in volume. Is there something that I need to do to make sure there all the same volume when I change patches. I happens alot on the patches that use the volume/expression pedal. When I want to use wah function, i click it down. Because the volume pot is now wide open position and in wah mode ite blaring. Any ideas?

[@GlennDeLauneOfficial]

Make sure you have the pedal switch to momentary and not toggle. That may get it to work.

[@FunknGrvn]

I'm sorry did you say something? I was busy listening to those badass tracks you had going in the background:) Nice job man!

[@FernandoCosta-mo7of]

Good day. I have a Boss Gt-100 conected throught the 4 cable method to a Marshal Amp. If I still want to use the amp simulation in the GT-100, where must I put the loop S/R (send/return); before or after the amp simulations. Please reply. Thank you.

[@jeffmilkey]

Just in case you are trying to use BOSS Tone Studio and you can't get your presets to come up...... On the GT-100 go to System / MIDI Settings. On page 2 make sure MIDI in select is set to USB (Auto) and make sure MIDI out select is set to USB

[@GlennDeLauneOfficial]

You should look into the Traynor K-4 and K-2. These are really keyboard amps but they sound killer for these digital modelers. Currently I use the QSC K-12's with the GT-100. They sound very good.

[@robsangg]

another great video glen! Will you consider doing a comparison video between the hd500 & the gt100 or give your opinion of which you prefer. I own the hd500 and would like your take on which you find that a) sounds better, & b) is more user friendly, as I am considering buying the gt100.

Hi Glenn, can I program a assign pedal to change the Divider function between Dual (AB) and Single (A or B)? Or I only can use one kind of divider for patch? thanks!

[@GlennDeLauneOfficial]

Just turn the little knobs under the screens to change what the pedals do in Manual Mode.

[@GlennDeLauneOfficial]

You should either try going into the FX return of the amp or run in 4 cable method. I just did a video on that if you care to watch it.

[@peeweesherman]

Great PRS, great player great teacher. Thanks Glenn.

[@jessereyna7408]

Hi glenn,thanks for that Gt-100 video setting intsructional video;but i was wondering: Is that FS-6 pedaljust for a two amp set-up? or can it be used to beef up your over-dub guitar(Live-performance)effects set up? I guess what i'm trying to ask;is there more than one way to get multiple guitar effects parts while you're playing live or in a studio setting? I f i were playing in a band with tow guitar players;this wouldn't be too much on my mind;but if i were the only guitar player;yes it would.

[@rsjb41]

Very informative video! I was trying to do what I thought was a simple edit to one of the patches I downloaded from you. I messed with it for hours because I could not figure out what all was going on with the push of one button. By the way on the Neal Schon patch, if you dump up the gains on the amps and reduce the delay a little, it is a Tesla - Modern Day Cowboy sound almost perfect! Love that sound.

[@GlennDeLauneOfficial]

Thank you very much for your support sir.

[@GlennDeLauneOfficial]

The HD500 is very good too and i do use it as well.

[@bossgtdiez10]

HEY BRO,, been a while just wanted to sat hi... nice TSA15 by Ibanez.. got 1 with the matching 12" cab.. like it very much.. how do the pre-amps on this unit compare to the gt-10 line hd 500???

[@Sid_music]

Thanks for your insights! I am not sure how the 'sound hold' feature under fx1/fx2 works, could you please tell me how to use that?

[@wb1969]

Hey Glenn: Love what you do! I am looking to upgrade from my Gt-8 to the GT-100. I do many solo gigs going direct to the mixer and and on full band gigs I use a Tech 21 Power Engine 60. Do you have tips on basic settings going direct to mixer? I'm playing a wide range of material from smooth jazz to classic rock and blues to standards and country....

[@GlennDeLauneOfficial]

wb1969 yes the GT-100 can do those sounds very well. Just use the global EQ to shape your sound.

[@GlennDeLauneOfficial]

You should look at both the GT-100 and the POD HD500 as an upgrade.

[@retrojoeman]

What are your thoughts on the GT-100 Librarian ? Will it ever have a app for the PC that will let you change settings like on Digitech Multi-effects Libraian ? It makes it a lot easier to have your board on the ground & a model of it on your PC to make the tweaks & changes . By the way I enjoy your reviews & music ...

[@jayscanlan2775]

I jsut got around to watching this video and took notes for anyone interested, these are just my quick raw notes: 2:25 **USING PHRASE LOOP PEDAL AS AN EFFECT** ------------------------------------------------------------------------ 1. GO TO "SYSTEM/PHRASE LOOP" ON FAR RIGHT (LH SCREEN). 2. GO TO RH SCREEN - TURN IT OFF. * (CLEAN SUSTAIN PATCH) GAIN = 50 BASS = 50 MID = 50 TREBL = 84 LEVEL = 49 "GREAT HARMONIC FEEDBACK TO SET THIS UP: (SYSTEM) GO TO (RH)ACCEL/CTL - **THIS IS WHERE YOU PROGRAM ALL THE PEDALS AND ASSIGNS** (8 DIFFERENT ASSINGN - CAN BE USED AT THE SAME TIME) *FIRST ONE IS ACCEL/CTL PEDAL -HE USES AS *LEAD BOOST* RH SCREEN=A&B SOLO FOR (2) AMPS -FOR 1 AMP SET TO A/B SOLO EXP PEDAL SET TO WAH SUB 1 AND SUB 2 PEDALS ARE FOR BOSS FS6 PEDAL ADD ONs HE USES THIS WITH EXTRA PEDALS, SEET AS FX1 & FX2 (SUB EXP IS FOR ADD ON EXPRESSION PEDAL) 5:17 **ASSIGNS** ASSIGN 1. SELECT(LH SCREEN. P.LOOP PEDAL/SOURCE (RH SCREEN)=ON Distortion = ON/OFF ASSIGN 2. = OFF ASSIGN 3 = DUAL DELAY(DELAY2)/TARGET CATEGORY. LVL=3/4 MIN=12 MAX=49 -THIS INCREASES BOOST FROM 12 TO 49. ASSIGN 4 = ACC/CTL PDL (RH SCREEN) BUMPS UP VOL ON PREAMP A FROM 40 TO 48 ASSIGN 5 = PREAMP B - ALSO BUMPS UP VOL FROM 40 TO 49 ASSIGN 6-7-8 = OFF 6:55 **PATCH FOR RUSH MUSIC** PATCH # U 20-2 --------------------------------------- ACCEL/CTL PEDAL SET FOR "A&B SOLO"FUNC (RH) SUB CTL 1 = CHORUS SUB CTL 2 = FX2 ASSIGN 1 - PREAMP A, VOL MIN=54, MAX=57 ASSIGN 2 - PREAMP B, VOL MIN53, MAX 55 ASSIGN 3 - FX1 (PITCH SHIFT) [ASSIGN ON/OFF ACC/CTL/SOURCE TOGGLE/SOURCE MODE (ALL OF THIS IS HAPPENING ON THE SAME PEDAL) ASSIGN 4 - DELAY D2, MIN=20 MAX=63 ASSIGN 5 - USING EXP PEDAL TO CHANGE PREAMP "A" GAIN FROM 3 TO 36(MIN-MAX). ASSIGN 6 - PREAMP "B" CHANGES FROM 3 TO 22 GAIN. ** CHORUS/FLANGE PATCH (PATCH U10-2) ---------------------------------------------------------------- [ AT THE TOP IT SAYS J=120 AB ] PRE A PATCH A/B ] GAIN=50 BASS=50 MID=50 TREBL=71 LVL=50 ACL/CTL=CHORUS ON/OFF SUB CTL 1 - TURNS EFFECT 1 ON SUB CTL 2 - TURNS EFFECT 2 ON ASSING 1 - PHRASE LOOP PDL TURNS ON SLIGHT DISTION: OD/DS MIN OFF-MAX-ON END OF PROGRAMMING FS-6 PEDAL HIGHLY RECOMMENDED.

[@GlennDeLauneOfficial]

Thank you for this Jay. I going to Pin this post.

[@miko8473]

Hi! Glenn....I love your demo and its very nice..anyway if you could just help..how to set my delay into 8th dot note for gt 100.....thanks!

[@jtarrant74]

I also am playing it through the QSC 12's and I agree...sounds delish!

[@GlennDeLauneOfficial]

You can try the Slicer Effect in FX1

[@MontyDeane]

HEy Glann, Your probably not answering questions on this topic any longer, but im wondering something. I am trying to set up my gt100 the correct way, but im finding there is no correct way, just the way we want it, if that makes sense. So I have 40 songs in my play list. Should I be making a sound for each song, and naming that patch the name of each song, hence, 40 different patches, or should I be making a universal clean sound, and adding distortion, effect, etc, when I need it by clicking an assign? I know you play out alot using these toys, but just wondering what the most effective way for stage playing is best. Hope to hear from you. It seems that creating 40 individual patches is the most accurate, so you dont have to fumble through the effects, or remember which pedals do what. Problem I am having is patch level unity. One will be louder and the other will be lower, and gaining unity seems to be my downfall. Any suggestions, tips, etc? Peace

[@GlennDeLauneOfficial]

Hi Monty, what I do is make a universal clean, mild gain, main gain, lead boost. With that configuration you could probably cover your entire set. If there are songs that require a special effect maybe just those songs can be on their own.

[@MontyDeane]

@@GlennDeLauneOfficial ps, I have all of your patches. I guess Im starting with a patch. Universal clean is the patch? I am assuming mild gain and main gain are an assign as well. Can u give me an example of mild gain, main gain? or maybe you have them all setup in one patch? Lead boost is an assign. So for clarity again, one patch with assigns to different gains, etc. Maybe im asking the same thing over and over again. Forgive me, just trying to wrap my head around the complexity. Thanks bro

[@GlennDeLauneOfficial]

The Boss units have totally seamless switching so you can work on a preset by preset basis. So, for example, If you look at my Standard Patch set you'll see how I have them named. So in one bank that contains 4 switches (A, B, C & D) I may have Clean, Crunch Sustain, High Gain and Lead for those 4 switches. Then you also have the Acell switch and the CTL switch. Those I have programmed to work within each of those 4 sounds as an added layer to each preset.

[@userpipe]

i noticed you have alot of gear but no mac? no a mac kinda guy? or is that just a extra keyboard, because i was curious what you used to record :) (great vid)

[@Chandlerbingeling]

hey glenn. i really like your videos! i got a boss gt 100 now..but...is it possible to have more than two of the fx effects?...especially in the manual mode, for example...have a vibrato..a flanger AND a octave pedal?

[@philb7675]

Hi Glen; Excellent video! However, I have a question. How do I switch from GT 100 preamps to my Blackstar HT Club 40 Combo preamp? I can do it manually by turning on S/R and turn off GT preamps. How can I achieve this by just hitting a pedal or switch. I'm using the four cable method. I also have a Blackstar foot switch with a channel button and reverb pedal. This is plugged into the back of my amp. Any ideas? Phil

[@philb7675]

Hi Glen; Thanks for the reply:) I plugged in a BOSS FS 6 pedal into the SUB CTL/EXP jack. I then pushed CTL/EXP button and scrolled to "SUB CTL 1" and changed the function to "PREAMP" with MIN set to ON, MAX set to ON and SOURCE MODE set to TOGGLE. I did the same with the 'SUB CTL 2. Is that correct? Is that all there is to it? Phil

[@GlennDeLauneOfficial]

Phil Bardoul Yes Phil I think you got it there. So SUB CTL 1 would turn on/off the GT Preamp and SUB CTL2 would turn on/off the GT's S/R loop. That's it. If it doesn't work with the toggle setting change the switch on the FS-6.

[@jessereyna7408]

Sorry my typing isn't that great;but i'm wanting to to multiple effects part playing if need be Glenn? But i never seen that FS-6 pedal from Boss i'm assuming;so i thought i'd shoot you a question or so ok? Thanks Glenn. Take care.

[@maxsalasr]

Hi there. Question for you if you may. I have an old gt3. Looking to update but dont want a complicated unit nor too digital sounding. Gt8, pod x3 live, pod xt live, other...Which would you recommend? Thanks so much Max from melbourne

[@MREGDF]

HI GLENN. COULD EXPLAIN HOW TO SET THE GT100 HARMONIZER TO GET THE 2 GUITARS SOLO OF HOTEL CALIFORNIA ( ROCK VERSION). I ATTEMTED TO DO IT BUT I COULDN' T. THERE IS A NOTE THAT SOUND OUT OF TONE. WITH MY OLD ZOOM 3030 I GET THE RIGHT HARMONIZED SOUND EASILY.

[@vettster89]

Hi, Glenn. great video! What I am trying to do is. I need to assign a switch to go between my Marshall tube amp and the GT100. Is there step by step instructions on how to do this? Plus I can't get tone studio to load onto the GT100. I'm having a heck of a time with this thing. any help would be greatly appreciated.

[@tonylopez781]

Great vid Glenn, could you tell me how to set the EXP pedal to turn on the TUNER whenever the pedal is in the OFF position please? Thank you

[@Widdy5150]

Great in depth videos Glen and have purchased afew of your patches. In the 'output select' menu, what would be a general good setting for my Orange CR120? The difference each output setting makes in crazy and some patches sound awesome while others sound naff! What do you use while making your patches? Many thanks 👍

[@GlennDeLauneOfficial]

Thank you Richard. I always use Line/Phones output mode on the GT-100.

[@Widdy5150]

Even live through an Amp? Thanks 👍

[@andysaavedra7527]

It goes straight through a Fender Super-Sonic, and the amp goes through the PA. I really like how the new set-up is for the new unit. So what is your opinion on it? Is it worth upgrading?

[@TrueSid]

Hello, i'm new to the digital scenario and would appreciate if you could help me out. I'm getting a gt100 and now need something to play it through for jams/small performances. I dont want an amp cause then it'll colour the sound with its own tone. Could i please get alternatives to expensive flat speakers. my objective is clarity and volume

[@mysteryman32768]

also is the editor librarian out for the gt100 or not yet? I didn't see it on bosstonecentral yet.

[@ShivrajKarkera91]

I appreciate the time you give to explain these stuff to us .... I hav a query .. Im more into effects, like Tom Morello solos .. Is BOSS gt-100 ideal for me ? Can I assign a "Whammy" effect on the pedal, like octave shift controlled by the pedal or sumthing like that ... (The solo of song "Killing in the Name" is exactly what Im talking about) ... and is the Harmonist good on this ?? ... thanks :)

[@paulbateman]

I f i were using midid to change amp channels, could i assign one of the pedals to send a midi signal and change amp channel??

[@guitarsnikolas]

hello again! i purchased your patch pack and it is realy amazing, thanks so much for your effort! my problem is that in all your patches my guitar is so sensitive i cannot even touch the strings and when i take my hands out of the fretboard the noise is too much...ant tip on how reduce that? i tried the eq in presets but this high sensivity didn t came out plus the quality of the presets changes when i chasnge something...any help i use them for direct setting also i want to ask if i can assign my sub pedal as expression and control my effects from it so i can have gt's pedal only for volume thanks a lot!

[@GlennDeLauneOfficial]

Hi Nikos, Thank you very much. Make sure your input level on the GT-100 is set to -10db and not +4db. And Yes you can assign effects to the Sub expression pedal or even two separate Boss FS-5U pedals.

[@GlennDeLauneOfficial]

Yes it would.

[@TheK20sedan]

Glen I have a roland GA-212 and the Gt100... in your opinion what is the best way to connect this??

[@Unit21100]

trouble with the new digitech is you need an ipad for the brain! but that one does realy look great too! do you rate the line6 hd 500?? thanks for taking the time to read mate,,respect from wales uk,,ps just been checking out you facebook page :) take it easy my friend

[@GlennDeLauneOfficial]

Well if you are using the 4 cable method with your JVM and you are happy with the results then maybe not. BUT if you are going into the front of your amp or in the FX loop then YES, the GT-100 is much better with this application. That;'s a great amp you got BTW.

[@exball296]

Hi Glenn, I got an FS-6 and I am using a single stereo cable the BOSS TONE STUDIO for GT and I must say that I find it difficult to program (haven't been successful yet. Is there any documentation that you know of for the BOSS TONE STUDIO. If I want to save a patch do I use the write button? Can I print a list of my patches? I just don't want to screw-up. As usual thank's for your help John

[@zofo64]

Hi Glen, great videos, I'm learning a lot! I just can't figure out how to send Midi Control Channel Changes(?) to a switch the amp channels. Am I missing something very simple???

[@GlennDeLauneOfficial]

Thanks Steve. You don't really have to send any sort of messages. All you do is set the GT on a channel OTHER Than the one you want to program, then set your amp on the channel you want and THEN press the pedal on the GT you want to correspond to that channel and the GT will learn it. At least that's how it works with my Marshall JVM205H

[@zofo64]

Glenn DeLaune So where will that get stored? I can see when I change patches my app changes, but I don't know how or why... or more importantly.. where!?

[@GlennDeLauneOfficial]

It gets stored in the patch.

[@zofo64]

Hi Glenn, My Blackstar only has Midi in and Thru, so I can't send the CC to the GT-100 :(

[@GlennDeLauneOfficial]

Did you try it like I explained?

[@ShamNurddin69]

hyee sir...i need some help.....how to keep delay and reverb effects still on when i'm change the patches.....coz with GT10 i can do it....but with GT100 i can't find it to do that

[@GlennDeLauneOfficial]

GT-100 does not have that feature.

[@ShamNurddin69]

@@GlennDeLauneOfficial thanks bro

[@sologuitarSOLO9146]

Hi Glenn, When you make assignments to your Accel/CTL pedal(or any pedal for that matter), for example where you put Assign 3 (Delay2), Assign 4 (PreampA), and Assign 5 (PreampB) all to the Accel/CTL pedal, do these settings cause the original CTL/EXP menu assignment for that pedal (where you set SoloA&B) to work at the same time as the Accel functions you assigned, or does the assignments for the pedal override anything you set for that pedal under the CTL/EXP menu? In other words, in your video example, will the Accel/CTL now switch Delay2, PreampA and B boost on, and NOT do the SoloA&B you assigned via CTL/EXP? Thanks!

[@sologuitarSOLO9146]

Meant to ask the same question about how you assigned the expression pedal to control your PreampA and PreampB boost values. If the CTL/EXP menu assignment for the expression pedal was set to Wah/FV, does the assignments made to the expression pedal cause the Wah/FV to no longer work? Thanks.

[@GlennDeLauneOfficial]

NKC WOW, That's a very technical question!! First, the ACCL/CTL menu is totally different than the EXP settings. All of the assigns can be set to the ACCL & PRASE LOOP pedals for several things to happen at once.Second, Unless you turn the EXP pedal to OFF (like I do in one of my custom patches called "Nugent") then, Yes. That "OFF" setting on the EXP pedal will override the pedal settings. That's the only way you can get that infinite delay setting using the expression pedal. Also it must be set to "Momentary" NOT "Toggle". That's the most common mistake people make when trying to program these settings.

[@sologuitarSOLO9146]

***** Ok. That's very helpful information. So given these two examples am I making the right assumption? 1. CTL/EXP menu > Expression Pedal > set to WAH/FV Assignment1 for Expression pedal > set to PreampA boost Assignment2 for Expression pedal > set to PreampB boost now when I move the Expression pedal (and it is set to toggle)...I will get both WAH/FV and Preamp boosting at same time 2. CTL/EXP menu > Accel/CTL > set to Chorus Assignment3 for Accel/CTL > set to Delay now when I hit the Accel/CTL I get both Chorus and Delay together (not just Delay) Thanks much.

[@sologuitarSOLO9146]

Hi Glenn, Took your advice and grabbed up an FS-6 to attach to the GT-100. The GT-100 guide only shows a picture of the back of the FS-6 showing all switches placed in the left position for polarity and mode (momentary). I did get the TRS cable that has on connection on the GT-100 side and a separate connection for A and B on the FS-6. Are you set up the same way in terms of the switches all set to the left? Also, however you do have it set to, do you ever have a reason to change yhe momentary/latch switches based on the patch you are using? Thanks much!

[@GlennDeLauneOfficial]

The Mode switches are both in Latch mode and the Polarity switches are set to the left.

[@sologuitarSOLO9146]

***** Thanks again. You rock.

[@marmadukewinterbotham2599]

Great video, thanks. I don't get Assigns. If a single patch can have lots of assigns how is each assign activated? Thanks.

[@ShivrajKarkera91]

Hey great job man, one thing, when I use pitch shifter in FX 2 to get a virtual half step tuned sound, i get an ugly flanger sound, how do i get rid of it :(

[@Bunkie112]

Great video Glenn! On my GT-100 when I use a high gain amp model (like the MS amps) and I have the gain turned (say to 90) , I'm getting a lot of noise, even with the guitar volume knob turned off. As soon as I insert a noise gate in front or after the amp model, the noise goes away. The noise sounds like static white noise, it's not a hum. If I use no amp models, or turn the amp model gain down the noise goes away. Is this normal or do you think there is something wrong with my GT-100 or its power supply? I've tried using a ground wire and lifting the ground but it makes no difference. I'm using the 4 cable method and I've also tried it with 2 cable method and plugged into the amp input and even into another amp and same issues. I tried my Zoom G3 into the amp input and it has no noise at all, unlike the GT-100. Thanks in advance!

[@GlennDeLauneOfficial]

Thanks B. yeah you don't need to turn your gain that high. If you switch the Gain switch to High you'll find you only need to turn the Gain up to only 30. If you need more gain that that use a stomp in front of the amp with a low gain setting.

[@painnutplay9]

Hello. I want to use CTL to turn on/off delay, and use the p.loop pedal to control delay tempo and other effects tempo as well. I already managed to det CTL and also P. Loop pedal to tap tempo delay. But I can't find the way to control other effects tempo. My idea was to be able to set tempo on all time based efffects like delay, tremolo, phaser etc with just tapping one pedal or at least 2 separate ones (one for delay and other one for other effects). Any idea how can I set global tap tempo for all effects?

[@ralfwieland8298]

Hello Glenn, great video, thanks for that. But i have a specific problem. I connected the GT100 with the 4 cabel method with my 3 channel Bugera Trirec. Now i want to select for each patch the right channel. E.g. patch U01-1 -> Amp channel 3, patch U01-2 -> amp channel 1,.....Is it possible or do the GT100 only send PCH of the patch? I think there should be a mapping like "if you choose patch xyz send the PCH where the amp is listing for the specific channel. I have no idea how to realize this. BR Ralf

[@GlennDeLauneOfficial]

+Ralf Wieland Unfortunately No. The GT-100 does have an amp switch but it can only switch two channels. You would need MIDI to do this and your amp does not have MIDI. You can try a TRS cable connected to the AMP Switch jack on the GT but I doubt it will work.

[@ralfwieland8298]

Hello Glenn, thanks for the very quick answer. The amp has midi, but fixed program change commands. If the amp receive a midi PGM001 he is switched to CH1, PGM002 ->CH2 and PGM003 -> CH3.

[@GlennDeLauneOfficial]

Yes if the amp has MIDI then it should work. Hook a MIDI cable from the MIDI out of the GT-100 and to the MIDI in of amp. Then to program it (And this is important) First put the GT on a different patch that you want to program like for example patch U002. Then on your amp put the channel you want it to switch to when you press U001 on the GT-100. Once you have the amp channel on the channel you want THEN you press the GT U001 pedal. From that point on when ever you press the GT U001 pedal your amp should switch to that channel. That's how it works with my Marshall JVM so it should work the same way for yours.

[@hichembell9972]

+Glenn DeLaune very intreasting. i have a laney irt studio and it has a midi footswitch 3 channels, boost and reverb. is it possible to replace that original footswitch with gt100 using the midi in of the amp and store presets with different channels??

[@GlennDeLauneOfficial]

Yes if the amp has MIDI it should work no problem. Check out this video. It's using the GT-10 but the GT-100 works the same way. kzbin.info/www/bejne/gKHQk3iZjst4kKs

[@Gammasbote]

Hi Glenn...!! Thanks for the videos, they're awesome. Is it possible to do a tap delay using maybe the FS-6? Thanks again.

[@GlennDeLauneOfficial]

Gammasbote Yes you can. You use the assigns for that.

[@mysteryman32768]

i have ordered a gt001. have you any experience or thoughts on this unit? its supposed to be the same as the one hundred but desktop model.

[@SuperRiver80]

Hi Glenn I recently brought your patch bundle for the GT 100 & the FS6 footswitch after viewing this video I cant seem to get the F6 to work properly or consistently sometimes it dose as instructed and sometimes not (or with every second push of the switch) - what are the basic parameters I need to set up in order for the FS6 to work effectively ? Appreciate any feedback thanks :-)

[@GlennDeLauneOfficial]

Change the polarity switch on the FS6

[@bazaxe]

I have also tried changing polarity which does not work for me. I added a post today.

[@johnlovell1640]

Great tutorials. I bought the GT 100 based on your excellent 'sound on sound' vid.. Not sure if I am following this correctly, or you may have explained, but I am trying to figure out a way assigning the built in Vol/Exp pedal to control the delay volume as I use an Ernie Ball Vol for my volume.. thanks

[@GlennDeLauneOfficial]

Thank you John. That's a tricky one. First you have to turn OFF the volume pedal in the system menu. Then you have to go into the assigns menu and set the target to EXP and the source to delay Level.

[@Beer_goggles]

Hi Glenn, im trying to do something so simple with my gt 100 yet so dam hard.... for me anyway hehe, i want to somehow set it up so that the foot buttons turn on and off individual fx that i choose but otherwise there is nothing else in the mix, ie; im using my amps clean or dirty channel naked (the sound, not me while playing) with the option to "stomp" an effect on or off. is this possible?

[@dibyarupray4364]

The system changes you make like turning off the phrase loop feature..is it for only this particular patch or the looper is turned off for all the patches ??

[@kingeagle5045]

Hi Glenn !!! Excellent info !!! Thanks a lot !!!! By the Way !!! I love the song when the video starts !!! A beautiful ballad !!which is the name of that song ?? Where can i buy It !!!

[@GlennDeLauneOfficial]

Maurice Mars Thank you. That's one of my songs called Changing Seasons. You can purchase it here: www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=9NDXM64BKWNML

[@ShvanKaban]

yeahh maybe , well thanks for your time my friend , keep rocking.

[@drystef]

Hi Glenn ,scuse me where is your video where you show how to transfer your downloaded patches from pc to gt100? Thanks Steve

[@GlennDeLauneOfficial]

Well I don't have one for the GT-100 but i have one for the GT-10. It's pretty much the same though. kzbin.info/www/bejne/bXKldZhsmZaVm68

[@drystef]

Thx Glenn have a nice day

[@MrJaydeep777]

How does the GT 100 compare to the HD500x. I have the 500x and I think it sounds and feels a bit compressed. Not the greatest dynamics. Is the GT 100 any better?

[@LunaGuitars68]

Hi..just got the GT100 and trying to figure everything out. I have 2 tube amps I like to use at the same time. One sounds good with effect pedals going directly to the front of the amp and the other amp sounds best with effects going through the fx loop. Do you know if the gt100 would have the capabilities of running a single patch, splitting that patch and running the signal to the front end of one amp but through the fx loop of the other while keeping both amps independent of each other.

[@Unit21100]

would you say the gt100 is the best on the market at the moment,,been looking at the eleven rack but keep coming back to this for an upgrade, currently using a gt8..cheers Glenn great work!