Boss GT 100 Tutorial - How To Edit A Patch

[@gordonstowers3167]

One of the most useful GT-100 tutorials I've seen. Thank you so much. One of the most frustrating problems I was having when editing was how to access the all the effects when creating a new patch. Thanks to your hard work problem solved 👍

[@GuitarNTabs]

Hey there, Gordon 😊 Thank you for the kind words, I'm really pleased to hear that you found what you needed! You let me know if you need anything else, I'd be more than happy to help out. Rock on and enjoy the GT-100! Best regards & Cheers.

[@PaulR387]

Absolutely brilliant, I took one look at the instruction manual and thought oh no, there’s no foreign languages section, this is going to take awhile, not with your video, Thank you for sharing, helping people and saving time

[@subratadevnath1875]

I like your explanation sir, I was having a lot of difficulty in toning, you explained very easily how to tone well.👍

[@GuitarNTabs]

Hi! I'm very happy to hear that! Keep rockin'.

[@sosmooth7]

Great tutorial. Just what I needed to get started with my GT100. Sometimes some people don't really take the time to show us HOW to get into the product that we've purchased. Thanks again, GREAT TUTORIAL!!!

[@GuitarNTabs]

Hey, @Phil Spigner - and Happy New Year! Fantastic, thank you very much! I truly appreciate it. Indeed, that seems to be the case with many newer products, which is a real shame.. Anyway, let me know if you need anything else, I'd be happy to help out. Best wishes Cheers.

[@Bendior]

Your video helping me in 2024😊

[@GuitarNTabs]

Thank you so much! Cheers.

[@PROFILETODAY]

im a new user and somehow lost hope setting up my GT100, however, your video made it clear to follow and understand the setup, well done my friend and thank you - FretboardMic

[@GuitarNTabs]

Thank you, very much, I really appreciate that! I'm glad you found my videos helpful! If you need anything, or have further questions, then please do let me know, I'd be happy to assist. Best regards!

[@PROFILETODAY]

@@GuitarNTabs YOU ROCK, thanks for everything

[@GuitarNTabs]

@@PROFILETODAY - Always happy to assist! Rock on!

[@thecentralscrutinizerr]

This guitar effects processor is still one of the best sounding processors out there and I personally love the soft switches instead of the old metal "round top" switches.

[@baldyivy8982]

thanks for this well constructed video very easy to understand and a great help for a new user for this unit

[@AntonioCavicchioni]

Thanks for this video... I discovered several cool things that I didn't know we're in the GT100

[@GuitarNTabs]

Excellent - that's fantastic, Antonio! It's always great to learn and discover new things! The GT-100 is a true beast, and the possibilities are endless! Cheers.

[@VASIJAS7]

Thank you for sharing this tutorial!

[@GuitarNTabs]

You're very welcome, Jamie! I'm glad you enjoyed it 😊 Let me know if you need anything else. Cheers.

[@stringlesson7107]

May l know your name please

[@Watzline]

My HD 500X is acting weird, so I have decided to go back to Boss, [have this GT100 coming today] which I had a GT4, 6, 8, can't remember,, but I have to get this pedal up and gig ready PDQ, hoping they have some presets which will get me quick started. Man I love these processors but sometimes they are a never ending bend over and tweak. I will keep watching the vids. Rock til you drop!

[@GuitarNTabs]

Greetings, Watzline! Thanks for your comment, I appreciate it! Aaah, I see, that's a bummer.. I'm most sure the GT-100 will do everything you need! I've had it for many years and it's a true workhorse! I would really recommend creating your own patches, instead of going through the Factory Presets.. To be honest, they are really bad... too much of everything, really... The real gold, in any processor, is found when creating your own presets. Also, it would be important to get the GT-100 properly set-up, before you decide to dive in... I'm thinking about: 1. Deciding how to wish to use the GT-100 with your gear and equipment. Whether you want to use the GT-100 for its effects only, along with your own amplifier, or if you wish to have the GT-100 do all the processing - both effects and its onboard preamps/cabinets. 2. Selecting the proper Output Select option. 3. Performing the Input Calibration for the GT-100 - this ensures that your guitar, and its pickups, is not sending too hot of a signal, causing the GT-100's input to clip/distort.. 4. When creating patches, always make sure to keep your effect, gain and volume levels somewhat matched with the remaining things you have going on in your patches. Too much gain/volume, will cause issues and can really muddy up a good patch... Let me know if you need any help with this, I'd be happy to assist. It's an important process, so getting it right is key! Best regards & Cheers.

[@Watzline]

@@GuitarNTabs How nice of you for the advice! In the past I have set up my guitar processors with a left to right clean to distortion type pattern, on each patch, or add chorus second, delay next etc. to standardize it all. I try to keep the amp in neutral, clean, bypassing the amps effects altogether, letting the pedalboard do the work. Iv'e been thru this before, and know that all these processors [even had Digitech] are set up for easy editing, but one can get lost in the minutia, but once you catch on, ya' just get it going. But I know that sometimes we can be happy with a created patch, but one more step, or a missed additional move, results in an 8 when it could have been 10,, It would be nice if the manufactures had informative, concise resources available, but they do give you some guidance, and we just have to put the time into the unit. Or rely on guys like you, more Tech Savvy, and learn from You! LOL! The customer support guys at Line 6, expected me to call daily, which I did, asking How To questions. LOL! Just got the news the delivery has been delayed, was hoping to get started today. I probably will be in touch! Thanks, Kenny

[@GuitarNTabs]

@@Watzline - Hey! Sure, no problem, I'm always happy to assist. It's just so important, and many, many players skip this.. They just wanna play.. and I get that, but, it's just no good if the thing isn't set-up properly! haha... Aaaah, I see, and that seems to be a great way of doing things - excellent! Agreed, there's a fine line between "just right" and "too much", certainly! Yeah, they provide guideline, and that's cool, but it's not always enjoy, sadly.. Haha, cheers, yeah, I've been through all the different situations with the GT-100, trying to get it all sorted out! That's a bummer.. I hope it will be delivered soon, then! Enjoy, and let me know if you need anything! Best regards & Cheers.

[@Watzline]

@@GuitarNTabs Well I received the GT100, today, and after a couple of hours I have several things that I do not like, primarily the screen Icons look cheap and hard to understand. You were right in saying the presets are all kind of crappy. I will contact Boss, and hopefully they have support you can actually talk to, like Line 6 does. I know the GT100 can be set up the way I would like it, with pedal one being the patch, and pedals 2, 3, 4, being effects. I have spent lots of time reading comments, and felt that the GT 100 would be a good choice, as many users recommended it. I know it will take some time, but feel that being familiar with the Line 6, would be my best choice, just get another HD500X. I will give it some time, but feel that just returning it would be less work, and headache, Thanks

[@GuitarNTabs]

@@Watzline - Hey! Yeah, there might be some differences, compared to the HD500X, but that's to be expected, but I hear you. Generally all Factory Presets are crappy, and the real goal is to create your own patches, and have them set-up to do what you want, and how you want them to sound. If you can't get ahold of Boss, then please let me know, and I'd be happy to assist you, for sure. If you want, them explain to me what you want, and maybe I can assist. Did you return the GT-100, or what's the situation? Best regards.

[@MontyDeane]

Hey Brother, thanks for all the info. I have looked around and you cover this very well.

[@GuitarNTabs]

Thanks, Monty! I truly appreciate your kind words, and I'm glad that I could help you out! Let me know if you need anything! Cheers, man!

[@carlofontanos]

Amazing tutorial, you made it look so easy!

[@GuitarNTabs]

Hey Carl! Thanks, man! I truly appreciate it! I hope it was helpful for you! Are you enjoying the GT-100? Cheers, mate!

[@rayraymond2952]

Again, another most excellent vid. Thanks. ----- [1] --- [a] The GT-100 might not be perfect. It might not sound perfect. However, for guitars for about a mere $400-500 or so with a GT-100, one can get darn good foot pedals of every stripe & get other guitar simulations effects in any order, volume, mix, & anything else one can think of. --- [b] Maybe, a Line 6 or some other brand of multi-effects might be better than a GT-100. However, the GT-100 seems to be pretty darn good enough. However, someone, please, blather & let us know about some of the other guitar multi-effects units & how they compare to the GT-100. It's good to gain knowledge. ----- [2] I send my GT-100 into a Fender Champ 20 amp (that's why microphones were invented - to get the guitar into the house mix), with the Champ 20 set to zero tone settings. All my guitar tone comes from the GT-100. My Champ 20 is my personal monitor for my guitar & is the medium, with a mic, by which I send my guitar to the house mix. ----- [3] I wish that the GT-100 were available when the Beatles were on Ed Sullivan, 50 plus years ago. (Yeah, Ted Nugent & I are that old, 69.) If the GT-100 were around when the Beatles-lead British Invasion occurred, over the decades, I could have save thousands of dollars on guitar effects pedals & on various heavy, back-breaking amps. Nowadays for gigs, all one needs is two guitars (strings break), one light as a feather Champ 20, a small vocal monitor, a mic & mic stand, & a GT-100. Life is sooo good for us oldsters. :) Thanks, Richard

[@jackvan7818]

Good job. Thank you for sharing this tutorial! God bless

[@GuitarNTabs]

Hey there, Jack Te. Thanks for your comment and kind words, I appreciate it! Let me know if you need anything. Have an excellent day & God bless 😊

[@renec.615]

Awesome vid! Thank you!

[@GuitarNTabs]

Thanks, Rene. I'm pleased to hear that! Let me know if you need anything. Have an excellent day.

[@mrmajestika]

great stuff awesome easy to understand thanx

[@GuitarNTabs]

Hey Anthony! Thanks, man! I really appreciate that! That's the main intent with my videos! Let me know if you need anything! Enjoy! Cheers!

[@nipav1767]

Great video, just one question. Let's say that on the "top effects chain" after the amp I want to have an overdrive and delay, and on the "second (down) effect chain" after the amp I want to have a different delay and pitch shifter. Is that possible? Can you assign multiple effects to each of the chains or is it fixed to only accommodate one amp and one NS per chain? I believe what I am saying is having parallel effect chains, but having the freedom to assign a lot of effects to each chain.

[@GuitarNTabs]

Hello, Nick. Thank you, and thanks for watching. Yes, that is possible. You would simply have to move the different effects around, so they appear in the desired spot. Also yes, you can use the Assigns to control the different effects and parameters within the different chains. You might have to change the settings for the Divider and Mixer, also found in the Signal Chain. Take a closer look at that. I hope this helps. Let me know what you find out. Cheers.

[@ca0520]

Thanks for this great Demo..

[@GuitarNTabs]

Hey there 😊 Thank you for watching, I appreciate it. I'm pleased that you found it helpful. Let me know if you need anything else. Have an excellent day Cheers.

[@ca0520]

@@GuitarNTabs Hi, that's so nice of you my friend, yes I have a question if you have time to answer. I tried to create a patch following one of the videos on youtube which I failed (This one here kzbin.info/www/bejne/aqmopH9uhMlsitk ) Somehow now I feel that my other patches are also sounding different for some reason. Do you think it can happen? Thanks heaps And all the best to you!!! Compliments all the way from Sri Lanka..

[@gordonstowers3167]

Thanks friend I really appreciate it.

[@GuitarNTabs]

No problem! 😊 Have a great day!

[@danbudai8360]

Hi, what type of amp are you using and what type of guitar and pickups? Thanks for the helpful review.

[@GuitarNTabs]

Hey there, Dan. Thanks for your comment and question - I appreciate it :-) I mainly use the onboard preamps and cabinets from the GT-100/GT-1, along with the onboard effects and such :-) It's a compact and excellent sounding solution. I mainly use the Clean Twin preamp model, and match it with the 2x12" cabinet setting. That is able to give me a clear and punchy clean sound. From there I tend to add some compression, reverb, little overdrive (the T-Scream model) and some delay. I might also add some chorus/flanger, if I need some ambient patches :-) My main guitar at the moment is a Telecaster, equipped with one humbucker in the bridge position. Sometimes I also use a Strat, with a humbucker in the bridge and two single coils for the middle and neck :-) I think that covers the most of it :-) Are you looking for something particular, Dan? I'd be more than happy to help out, so just let me know. Have a great day! Cheers.

[@danbudai8360]

@@GuitarNTabs thanks for the prompt reply. Didn't thought it will go so fast. Bottomline, I borrowed a GT100 to see if it suits my needs and for the moment I can say it does. Considering my musical level time and budget. I have a fully loaded pedalboard which is breaking my back and finding the right pedals is a huge gamble since reviews on the net do not have my amp and strat. So as insane as it may sound to some I wanna sell some of the pedals and gove it a go with the gt100. Built my sound around your presentation and it works well. I am looking for a clean base sound and TS9 drive. The tight kinda drive. Gilmour kinda sound (I know...but thats what I want) I have some troubles asigning the Accl pedal to be the global bpm pedal. I might get back to you with questions. Thanks Dan

[@GuitarNTabs]

Hey again, Dan. You are very welcome, I'm always here to help out and answer questions - just fire away. I can imagine your situation, and it seems that more and more players are trying these things out, which is great. I've been there myself, so I know both the struggle and aspects, going through all this. To me it doesn't sound insane at all, but for other players it might... I've been there! Anyway, it's not their sound, but YOUR sound and feel, that's all! If I may, then I would highly recommend using the GT-100 for both effects and preamps/cabinets. I believe that will give you a more consistent result, but it's up to you - just my thought :-) I know the sound/tone you're looking for, and it's possible to achieve exactly that. I generally like to use the Clean Twin preamp, with the cabinet set to 2x12" and then add in the T-Scream overdrive. Perhaps adjust the drive of the T-Scream, add some compression and some delay/reverb - all good to go, trust me! Gilmour is excellent, and what a great sound/tone to go by and get close to - I support that :-) I have a video, or two, about setting up the bpm settings, so if you haven't, then please check it out :-) If it doesn't help, then please come back with further questions :-) Let me know what you think, Dan. All the best - cheers :-)

[@robcrisp6875]

thanks for your knowledge and help. My question is...When a patch has only one signal routing chain, for example, Preamp A only and Preamp B has dotted lines. How can I control the changes when I press boost and I want to change the volume? I don't get how to make those changes since it seems there is no preamp B. I know there is a way, though can't remember.

[@GuitarNTabs]

Hey there, Rob! Thanks for the comment and question - I appreciate it! I'm not quite sure I follow... What are you looking to boost or change the volume of? Looking forward to hear from you. Cheers.

[@picklerick2711]

Thanks a lot!! 🙏🏼🙏🏼 I learned more than I expected in this video! And nice « teaching technique » if I can say ahah! Thank you!

[@GuitarNTabs]

Hi there, Pickle Rick. Thanks for your comment and kind words, I greatly appreciate it. I'm glad you found the video helpful. Please let me know if you need anything else. All the best.

[@arowosafebamidele710]

You have impacted me so much

[@GuitarNTabs]

Hi there, Thanks for watching, and thank you for your kind words! I really appreciate it, and it makes me really happy. Have an excellent day. All the best.

[@israelhwang4033]

it helps a lot ,thanks

[@GuitarNTabs]

Thanks, I'm pleased to hear that! Cheers! :-)

[@arturocivit]

Excellent tutorial and thanks for your effort on this, however, quick question, how do I activate the cab sim, in my GT-100 cannot access to those, I mean, if I go to the cabs section, no matter if I turn the knobs, is not taking any action, any idea? Thanks!

[@GuitarNTabs]

Hey there! Thanks for the kind words and question - I appreciate it! The Preamp and Cabinet section is one unit, within the GT-100's signal chain. Press the EFFECT-button, and scroll to the PrA-icon and make sure to turn that block ON. Use the Page-buttons, to navigate to the Cabinet section, and make the adjustments. That should do it. Let me know - cheers.

[@arturocivit]

@@GuitarNTabs Actually I did it but no luck, I was wondering if this is something that is active when you select as output the line option?

[@GuitarNTabs]

@@arturocivit - Hmm, that seems strange.. How are you connected? And what is the Output Select set to? The Line/Phones option will enable the Preamp and Speaker sims.

[@arturocivit]

@@GuitarNTabs oh!! that¡s the thing, my output is set to JC120, maybe that's why I can't see the speaker sims, I'll check out that tonight and will see if that¡s the problem, if not I'll make a factory reset and see if that helps, thanks so much!!

[@TheRichie213]

I have the gt-100 pedal and all I want is to make it a pedal board. I just want three effects. On the 1 pedal I want distortion, on the 2 pedal I want reverb/delay and on the third I want a solo effect. I want it to stay permanent just like that every time I turn it on if you know what I mean. Is this possible? Any videos on this?

[@GuitarNTabs]

If you go through my Channel, and my videos, then you will see a video called GT-100 Manual Mode, and that's exactly what you're looking for. Cheers.

[@A7XGuitar999]

thx for the video. I subscribed to your channel

[@GuitarNTabs]

Thank you very much, Mike! I appreciate it, very much! Rock on!

[@AbhisekChakravorty]

Hi when looking in the effects chain shall i look left to right or right to left

[@GuitarNTabs]

Hi there. Great question! You should see it from left to right - so if you scroll all the way to the left, where you should see FX1, Comp, etc. then you're good. I hope this makes sense! Remember, proper pedal order is quite important.

[@AbhisekChakravorty]

GuitarNTabs Thank you So much for your reply, This helps

[@GuitarNTabs]

@@AbhisekChakravorty - You are very welcome! Let me know if you need anything else. All the best.

[@AbhisekChakravorty]

GuitarNTabs sure thank you so much for your kind gesture

[@GuitarNTabs]

@@AbhisekChakravorty - Sure, no problem at all! I'm always happy to assist. Enjoy, and stay safe! All the best.

[@FenderStratocaster06]

Hi I don’t want to use the pre amps in the pedal since I’m using a fender hot rod deville, however it seems the overdrives don’t sound great, I’m running a clean signal from my amp and then switching the overdrives on the pedal Am I doing something wrong to get them to sound good?

[@GuitarNTabs]

Hey Ethan. Thanks for your comment! Well, have you selected the proper OUTPUT SELECT? Also, are the onboard preamps from the GT-100 turned off? Another thing to consider is to Input Calibrate the GT-100, if you haven't already done so. Search for 'Boss GT-100 Input Calibration' here on KZbin and you'll see a video. Well, first off it's very important that your amp is set up the way you like it. You're using the amp's clean channel, so spend a little time dialing in the clean sound you want. From there you can always bring in the onboard OD/DS from the GT-100, and start tweaking those - by using the TONE and BOTTOM parameter, within the OD/DS section. I'm very fond of the T-Scream overdrive, and it provide great tones for blues and rock. The Clean Boost isn't bad either, but it would be a good idea to go through the OD/DS stomps, and see which ones suits your amplifier best. Try that and see what happens. Let me know! Cheers! :-)

[@MontyDeane]

One thing I have realized id if your going to use a clean channel or dirty channel on your amp, you need to disable the preamps in the gt-100, so your not combining the jumbled sounds together. Also, are you using the send/returns on your amp?

[@leofrombakersfield]

Everyone please forgive my ignorance? I want to try this FX return thing but still do not really understand how this is done? Not the 4cable method. I want to know how to use the FX return to use just the clean power amp part of an amp? I have 2 Jetcity jca50h amp heads. I have 2 2x12 cabinets. Sooo If I want to do this in stereo, the out puts L and R of the GT100 will go to the FX returns of each amp? Does this mean you bypass the front knobs of the amps except the master volume knob? Someone please share thi secret with me? LOL I must know! Thanks

[@GuitarNTabs]

Hey there, Leonard 😊 Thanks for your comment and question - I appreciate it! You are correct - if you have two amps then you would take both the L and R outputs and connect them to the two separate FX Loop Returns on your amps. Depending on the type of amp, you might have some of the EQ and channel knobs being bypassed, but you should have a dedicated level for the FX loop, so use that do adjust the volume. I hope this helps - if not, then let me know. I'll await your reply. Best regards.

[@guitarscale7972]

Hi man... Just a quick question...I have the boss me 70 ... And My friend bought gt100 .. He wants my tones on his unit ... So can that be done? If yes .. How? That would be really helpful.. Thanks man!

[@GuitarNTabs]

Hey there, Guitar Scale. Well, I believe it can be done. I think you should just copy the settings and parameters, from the ME-70 to the GT-100. I don't know if there's a software for it, but otherwise you would just have both units with you, and copy things from there. Try that, and see what happens. Let me know how it goes. Best wishes Cheers.

[@TheSixfinger1]

Great video man! The GT100 is a fantastic pedal I disable the cabs and run mine through a Mesa Boogie Simul 395 and 2x Mesa Boogie 2x12 half backs. Sounds incredible! It's made my Triaxis and Rocktron Intellifex redundant. Having all those different pre's and effects gives me the ability to run different amps either side with different delay times which is amazing at the price. I'd recommend this unit to anyone, and unlike a lot of other pedals is a breeze to use! How do I contact you with a question? Thanks for the vids! Great work!

[@GuitarNTabs]

Heeey, TheSixfinger1! Thanks for your comment - I appreciate it! Glad that you like the video! Agreed, the GT-100 is great! I've used it since it first came out, and I haven't looked back! I run my GT-100 straight into my band's PA and use the G-100's onboard preamps and cabs - man, they sound sooo great! Stereo heaven! Sounds like a killer setup there, man! Cooool! Yeah, the versatility is huge, and the effects are great! I really love the assign feature as well, and use it almost all the time! Yeah, I'd recommend this unit as well, no questions asked! The user interface is great, and easy to use, yes :-) You can contact me, via email, by finding my email here on my channel - under the "about" tab. Feel free to send me questions, I would be more than happy to help out! You're welcome - I really love making those videos! Looking forward to hear from you, and to answer your questions! Regards :-)

[@SanadKhalid7]

Hey if i wanna remove chorus from effect chain and add tremolo in effect chain what should i do?

[@GuitarNTabs]

@Sanad Khalid - That's possible, yes. You will have to make use of the Assigns - (A1 - A8). Have you watched my videos about the Assigns? Video 1 - kzbin.info/www/bejne/ramZY3SphL6XnNE Video 2 - kzbin.info/www/bejne/Y3Lag2iZlLuUpq8 Watch those two videos, and then let me know if you need further help 😊 Cheers.

[@dph42]

Could I bother to ask you a question? I have a patch that I bought or downloaded from somewhere a few years ago where the Exp Pedal replicates a dive bomb on a trem. I was working on another patch and trying to get my pedal to do the same and couldn't figure it out. Any idea what i am doing wrong? Thanks in advance!!

[@GuitarNTabs]

Hey there! Of course, you're always welcome to ask question 😊 Hmm, it's hard for me to tell exactly.. I would suggest that you look at the patch you have, where the effect is working, and looking at the different Assigns, especially for the Exp Pedal. Then copy the settings, and that should do it. If not, then you can always write the patch to another User location, as a copy, and change the settings, for the new patch. That would do the same. I hope this helps. Best regards.

[@donlawrence8810]

Awesome information. Thank you for writing back so soon. I didn't expect that. The funny thing is I've been playing since I was seven, and I am now a young 58-year-old man. I should know this stuff. lol. I have been a country and southern gospel guitar player for all this time. However, in the last five years, our church has gone the way of contemporary worship, which requires a lot of effects to match the original artist sounds. I am a little ignorant of the workings of the effect peddles. Your videos are really helping me. Let me ask you this. When designing a patch, where do I adjust the volume or level? Is it the master knob in the patch setting or is it in the EQ? Or perhaps do I set it another way? Again. Thank you for your reply.

[@GuitarNTabs]

Hey there, Don! Thanks for your comment and question - I greatly appreciate it! Well, I try to keep updated with questions and comments, so you're welcome. I'm always here, if you need help, have requests or questions. Nice, you've been at it a good long time - that's great! Keep it up :-) Well, knowing all this stuff is something you'll stumble across, at some point - atleast that's what happened to me :-) Thanks for your kind words, I appreciate it! Well, when I design a patch, I start by selecting the preamp sim I wish to use, since I'm using the GT-100 for both effects and preamps/cabinets. The desired preamp sim I tend to use, is the Clean Twin, which I've measured to have a nice target level. The target level being the level I match the remaining effects/preamps to - whenever I add a new one to the signal chain. So I start with the proper level, which is pretty easily dialed in, coming from the preamp sim, and when I need more volume, at a gig, for example, then I use the OUTPUT LEVEL, on the right hand side of the unit - which is basically the Master Volume. Often you can set the Patch Level knob to the desired level you want, but I wouldn't really use it like that. I would start by establishing a proper level from the preamp, amplifier, etc. you are using, and the match the remaining effects, etc. to that. It will help you keep the signal chain more "clean" and help to prevent any uncontrolled gain stages. Too much gain, or too much going on, can have an impact on the patch and its sound quality. Let me know what you think about this, and please ask further questions, if you want. This is quite a big topic, and it requires some patience, but trust me, it's all well worth it in the end! Looking forward to hear from you. Best regards Cheers.

[@mikemcdandy4899]

You could become an atheist and join a punk band. Its a hell of a lot more fun!

[@GuitarNTabs]

@@mikemcdandy4899 - Haha, what? 😂 I'm not sure I see the connection? Cheers.

[@donlawrence8810]

Love your training. I am having difficulty with the volume. It seems that all your patches have a level to the volume. Many times I hit a peddle and it is so loud that I am concerned that if I am playing live when pressing the peddle I will blow the place away. How do I adjust the volume so that all the patches are one level?

[@GuitarNTabs]

Hey there, Don. Thank you very much for your question and comment - I appreciate it :-) You're right, I do have a level for my volume and patches. Trust me, I've been where you're at, and at that time it became really frustrating, because everything was too loud and didn't sound all that good... I decided to do something about it, and this is what I do, these days: I use the GT-100 direct, which means that I'm either running it through my studio monitors or my band's PA/Mixer. This also means that I'm using the GT-100's preamps and cabinets, along with its effects. In order to keep a consistent level(s) I mainly stick to using one amplifier - in this case the Clean Twin preamp - since that is producing the loudest signal, atleast to me. Most of the other preamp sims will produce a drop in volume, but I find that the Clean Twin doesn't. The sound/level/volume that the Clean Twin produces are my target level - the level I will match all other effects, preamps, cabinets to, each time I add in new ones. I generally use my studio dB-meter to monitor all this, which makes it all a lot easier, but before that I just used my ears. The point is to do all this while you're at rehearsals with your band, since this is the context you want to use it in, and it will produce the best results. Having your patches, effects and preamps matched in level will really increase the overall quality of your sound and tone with the GT-100. I didn't believe it, but it really did - and I'm so happy with it! There's a lot to this topic, but it's all worth it, really. Let me know what you think about this, and let me know if you need anything! We can easily work this out, no problem :-) Have a great day Cheers.

[@butleroni]

Is there any way to toggle up/down patches while you are in Manual Mode, or do you have to switch out of Manual Mode, change the patch then switch back in? Thanks 👍🏼

[@GuitarNTabs]

Hi there. Thanks for your comment and question, I greatly appreciate it. You would need to use either the CTL/Accel or Phrase Loop footswitch, to set up an Assign with the function "number inc" or "number dec". If you have an external footswitch connected you could also use those. I believe that should do it. Let me know if you need anything else. Cheers.

[@butleroni]

@@GuitarNTabs Hello, thanks for the quick reply! I was hoping there was a way to do this without using 2 of the available pedals ( 1 for increase & the other for decrease ). In play mode you can just turn knob 1 to change patch but this is list in manual mode? Thanks again, this is a great resource, keep it up. ✌🏼

[@GuitarNTabs]

@@butleroni - Hi again. Always happy to assist. I've been through the Manual and Parameter Guide + I fired up the GT-100, and couldn't find another way to do it... Normally the knobs 1-8 can be set up to do certain things, but that's not the case in Manual Mode, since you're using knob 1-8 to change/select effects... I hope this helps. Let me know if you need anything else. Best regards.

[@alejandrojuarez2975]

what makes some sounds so clean??? my amp makes a horrible noise when using ODs or solo fx.

[@GuitarNTabs]

Hi. First, let me know how you use the GT-100 with your amp. Do you use the GT-100 for its effects only, and then your own amp? Or, do you use both the GT-100's effects and preamp models, along with your own amp? Let me know and I'd be able to assist you further. Cheers.

[@alejandrojuarez2975]

@@GuitarNTabs I use both at same time. Boss Gt-100 and Fender Amp (New) with its FX off mode.

[@GuitarNTabs]

@@alejandrojuarez2975 - That's the reason. In general, when using your own external amplifier, you should never use the GT-100's preamp models at the same time... Think about it, this basically means that you have two different amps/preamps running at the same time... Different EQ settings, different gain levels, different volume levels, etc. It's going to be a big mess, and especially when adding in even more gain, like an overdrive or distortion pedal, or even taking that overdrive or distortion into Solo. I would suggest that you decide whether you want to use the GT-100 for both its effects and preamp models, or your own amp with the GT-100's effects only. Another thing that is really important, is the Output Select. Make sure that it is set to match the amp, or equipment, you're using, for the best result. If you want to make use of both your own amp, and the GT-100's, then consider the 4 Cable Method - that is, if your amp has an Effects Loop. Let me know what you think. Best regards.

[@alejandrojuarez2975]

@@GuitarNTabs that’s what I meant. Use my amp with boss pedal’s effects only. I use mono/L from my pedal to plug it into Regular input connection from my amp. Amp model (Fender Champion 100) Never heard about 4 cable connections 🙈

[@GuitarNTabs]

@@alejandrojuarez2975 - Aha, thanks for clearing that up! First of all, make sure that you have dialed in your amp, so that it sounds the way you want it to. Whether that's clean, on the edge of break-up or overdriven, that's up to you. For me personally, I like to dial in an amp so it's just on the edge of break-up, which means it has a slight bit of punch and dirt to it, without being overdriven or distorted. Then I like to add in the GT-100's effects, such as the T-Scream overdrive, to really boost and kick the amp further into overdrive. Also, make sure to dial in the GT-100's effects properly, so they're not adding huge amounts of gain or volume to your sound, because that will quickly ruin any good sounding patch. 4 Cable Method lets you get "best of both worlds", meaning, you can use your own amp, but also the GT-100's preamp models, since the GT-100 has an Effects Loop. This only works, if your amp has an Effects Loop too. There are many videos about the 4 Cable Method, here on KZbin, so you can always check it out. I hope this helps. Let me know what you think. Cheers.

[@kevinfender1]

great vid. buying one of these next week im useing the gt10 is there much of a difference with the gt10 and gt100 cheers

[@GuitarNTabs]

Thanks, Kevin! :-) I've used the GT-10 too, before I switched to the GT-100, and yes, you'll hear a great difference! To me the GT-10 always sounded a little harsh, but the GT-100 is right in the middle - perfectly balanced! I love my GT-100, and it gives me all the sounds and tones I could possibly want! :-) The effects from the GT-100 are superb and the preamps are amazing - I really dig that! Cheers! :-)

[@MontyDeane]

Whats nice about the gt100 is the double window. It allows you to select in one window and edit in another. Great feature, amongst many other enhancements.

[@GuitarNTabs]

Indeed, the double screen feature is a great touch! :-) Easy, quick and simple! Cheers!

[@yodajazzcat]

Nice video but it's so frustrating when the choices you're looking at for each effect switch so fast. You either have to keep turning the knob or the choices disappear. Anybody else feel this way? Maybe it's just me, but I feel like saying, "Hey, Boss, slow it down just a tad and it would be great!"

[@GuitarNTabs]

Hi there, thanks for your comment! You're right, they do switch very fast... I don't think much about it, I just keep scrolling, until I'm there, hehe..

[@MontyDeane]

Hey bro, im trying to wrap my head around the use of 2 amps, so I can get a blended scenario. Problem is that I am not sure how to use the assigns to control each amp? Might you be able to shed some light on that? I know your using a PA system, but you seem to have a good knowledge of the gt100. Glenn Delaune said I should be able to do it using my assigns but I havnt a clue how. He gets back to you eventually but hes a very busy musician, so I dont expect a response for some time. Im currently using the 4cm and there is the right side output that is unused from the gt100, making it stereo if I use both, but what confuses me is daisy chaining the 2 amps using the send/returns on both amps? What I envision is using both as needed for my pink floyd stuff, then switching one amp off, using the dirty channel, and then switching ogg the marshall, to my my fischman for clean or both. Seems rather complex. Maybe you have a thought or 2 on the subject or concept?

[@GuitarNTabs]

Hey Monty! Thanks for your question - I highly appreciate you coming to me! I'll do my very best to help you out! First off - are you talking about the onboard preamps in the GT-100? Or something else? I would like to have that cleared up first :-) Yes, I am using the GT-100 directly to my band's PA, when I play live. It sounds great that way, and the preamps onboard the GT-100 is superb! Let me know, before I can continue :-) Cheers!

[@MontyDeane]

Actually no, I use the send/return which is bypassing the preamps on the gt100. I am using the 4cm (4 cable method) to my marshall DSL40C (#1), using the send and returns of the amp. So in essence I am using the true distorted tone of the amp rather than using the preamp tones. And using the gt100 for the effects and special features. Using the 4cm method truly makes my system so sweet sounding. Now, Since I have asked this question, I used my second amp (#2) for blending to get the killer stereo effect and internally in the gt100 pan left and right in the patches to produce that great stereo effect. How I accomplish that I simply use the right side output of the gt100 and run it into the input of my second #2 amp. However its just producing the right output sounds on that amp. I would like that second amp to function like the first one, depending when I want to trigger it. Sound is awesome but I think I should be able to use it even more to my advantage. I am wondering if I can use the 4cm method using both of the amp send and returns on both of the amps in a chain, so I can tell the desired patches, use the #1 amp on the clean channel in this patch for song intro, and when I go to the lead switch, use the other amp on the dirty channel and allow both amps to utilize the effects through the send and returns. So I guess the send and returns would run in a chain. i can visualize it but not sure if it can be done. I believe I will needs more cables as well. What are your thoughts?

[@TheSunBurnsBright]

Is it possible to assign 2 different Reverbs and have them separate? Anytime I set two Reverbs and switch one on, they both come one.

[@GuitarNTabs]

You can set up an assign which will toggle between two reverbs, if that's what you're referring to? Is that what you mean by separate? :-) Let me know - that'll help me answer your question as best as possible :-) Cheers.

[@TheSunBurnsBright]

GuitarNTabs That is exactly what I mean! I want one pedal to be a Hall Reverb and another to be an Ambience reverb 🤘

[@GuitarNTabs]

Then you would simply have to go to your first available assign, and select what CTL-switch you want to assign the reverbs to, and then make sure assign category is set to TYPE instead of ON/OFF. When the category is set to TYPE, then you can set up a Minimum and a Maximum. The Minimum target is the reverb you want to start with, in this case the Hall reverb, and the Maximum target would be the reverb you want to switch to - the ambient one. :-) Makes sense? :-) Cheers.

[@TheSunBurnsBright]

GuitarNTabs That makes perfect sense! You are a legend, thank you! Is that the same for Delays too? I play Ambient Post Rock so I need lots of Modulation and Time Based effects at my disposal.

[@GuitarNTabs]

Fantastic, I'm pleased to here that! Yes, that is the same with delays, etc. Once you've set the category to TYPE, in that particular assign set-up, then you can always use the Minimum and Maximum parameters to switch between two reverbs, delays, etc. It's a great feature, especially if you need more things happening on your patch! :-) Niice, man! Rock on and enjoy all the possibilities of the GT-100! It's a great piece of gear! You are always welcome to contact me again, if you need it, I'd be more than happy to help you out :-) Have a great weekend & cheers :-)

[@patrickromero5365]

Thank you this helped me alot Pat Romero Denver Colo

[@GuitarNTabs]

Excellent, Patrick! I'm very pleased to hear that! Enjoy, and rock on! Let me know if you need anything. Cheers, Patrick :-)

[@patrickromero5365]

I finally learned how to create a patch thanks to you i love this pedal borad its easier than i thought this saturday will be my 2 show that i will use it on. Thanks again.

[@GuitarNTabs]

Greetings, Patrick :-) Excellent, I'm very pleased to hear that! The GT-100 is indeed a great piece of gear, and I still enjoy playing mine, that's for sure! It's all about knowing the different functions, and make it work for you. Enjoy your show and let me know if you ever need anything! I'd be happy to help out. Best regards Cheers.

[@emmanuelmadrazo3068]

I have I question, can you do to gt100 manual mode in every patch? thank you cheers!

[@GuitarNTabs]

Hi there, Emmanuel :-) Thanks for your question! Yes, sure you can, that is no problem at all :-) Just access the Manual Mode by pressing both the UP & DOWN footswitches. Hope this helps! Cheers!

[@todda.2088]

kzbin.info/www/bejne/mX26kp6Er6hnpMU

[@josemorueta1656]

Hi there! (I'm from Spain so sorry 'bout my english). First of all thank you for your videos! they're helping me a lot with my new GT100 but I have a great doubt that is making me mad!. How can you add or delete effect pedals on your fx chain? I mean between divider and mixer or in another chain place. I need to erase or add whatever I want but I don't know how to do it!. Thank you!

[@GuitarNTabs]

Hi there, Jose! :-) Thanks for your comment and nice to hear from you. Thank you very much, for your kind words, I'm very happy that my videos are helping you! Regarding your question, then here's how you do it: To manage all the effects and such, press the EFFECT-button, and that will take you into the signal chain of the GT-100. In the lower part of the two LCD screens, right above the numbered knobs, you can see what each knob does. Use the knob that displays SELECT to scroll through the different effects and the knob that displays ON/OFF to turn on or off the effect. Use the knob that displays MOVE to move the different effects around, within the whole signal chain. Whenever you scroll to the FX-1 and FX-2 there will be a knob that displays TYPE, and that will let you scroll through the different effects within those block :-) Does this make sense? If not, then let me know! Cheers! :-)

[@josemorueta1656]

Ok, So the numbers of icon pedals you see are the complete number of icon pedals you got to use!, and then you can move wherever you want. But notice you have only a DLY pedal with many differents delays on it and you can't put a second DLY pedal on preamp B (for example) as the same way you have TWO Noise gates (NS1 y NS2). In the case you need a second delay in the second preamp you got to use the SUB DELAY and it's not the same... Anyway, thank you for your quickly response bro!

[@josemorueta1656]

Oh.... it's silly what I've written to you now. If you need DLY pedal in both preamps, you can take the DLY pedal out of the chain and you got it!!! hahaha. Not a good day for me!!! hahaha

[@GuitarNTabs]

Hi! No no, it's not silly at all :-) Let me tell you something: You have the specific DLY block, but then in FX-1 and FX-2 you have the option to select another delay, and even one more, if you use both delays from FX-1 and FX-2. They are called Sub Delay in the menu. If you check the Boss GT-100 Parameter Guide - search for that online - then you'll see all the effects and parameters :-) But as you've said yourself, then simply place the delay out of the two preamps, and then they'll get the same delay :-) Hope this helps! I'll be happy to help out more, if you need it :-)

[@jeffreymanalomanalo2682]

is there automode in boss GT 100. I mean is it available to save patches

[@GuitarNTabs]

Yes, you can adjust, edit and save all the patches labelled with "U". There's a Preset Mode and a Stompbox Mode. Preset Mode is where you adjust and save patches, etc. and Stompbox Mode is where you use the GT-100 like a regular pedalboard with separate pedals. I hope this helps. Best regards.

[@rohannabraham4081]

Thank you so much for this! I do have a question though, most of the time when I'm trying to edit a patch, the options aren't available in the FX1. It varies from patch to patch, and I don't want to undo any of the patches I've created, although they have the effects/options I'm looking for. Could you help me out on this? (I hope I was coherent :p)

[@GuitarNTabs]

Hey there. I'm not fully sure what you mean... Could you explain it a little further? Thanks Best regards.

[@rohannabraham4081]

@@GuitarNTabs anyway I can contact you? Email?

[@GuitarNTabs]

@@rohannabraham4081 - Hey! Yeah, sure! You can find my email on my KZbin Channel, under the About tab 😊 I'll look forward to hear from you. Cheers.

[@mrmajestika]

This may sound like a really dumb question but when you are creating patch do you engage one of the 4 pedals say i want to write a patch to pedal 1 do i just press that pedal then edit?

[@GuitarNTabs]

I usually select the patch I want to use for my creation of that particular patch. It also depends on what order I need the patches to be in. If I'm on the fly I will just choose a patch and start creating. Hope this helps! If not, then let me know, Anthony :-) Cheers, mate!

[@louieholgado1440]

Can I save only 2 patches in a bank? What happens to the other pedals if that's the case?

[@GuitarNTabs]

Hi Louie. Thanks for your comment and question. You have 4 patches per bank on the GT-100. You use the Bank up and Bank down footswitches to scroll through banks, and the 1, 2, 3 and 4 foot pedals to choose and activate a certain patch within the bank(s). I hope this helps. Let me know if you need anything else. Cheers.

[@ragnarbg]

Can you make a video with the 4cable mod using the Katana 100w head and the GT 100?

[@GuitarNTabs]

Well, that would be a little hard.. since I do not own a Katana amplifier... Maybe I will at some point, but atleast not for now.. Sorry! Hope that's okay, mate :-) Let me know if there's anything else I can do for you. Cheers!

[@lucasknoner4646]

how do i reset the patch to factory setting without resetting the whole board to factory?

[@GuitarNTabs]

You can't restore one patch to the factory settings.. You can Initialize a patch, and start from scratch, or you can do a full Factory Reset, that's about it... But, the User and Factory Presets are the same, as I remember it, so look for the patch in the Factory Presets - labelled with a P - for example P14. I hope this helps.

[@stewartadams5293]

You CAN restore a single patch to default settings. Just specify the range of patches to restore. It’s not hard, but I don’t have time to explain it. Good luck.

[@totzkiealquiza1711]

Hi.. im a newbie.. how to delete the loop that i made on gt-100?

[@GuitarNTabs]

Hi there :-) I believe you should just exit the looper - try pressing the EXIT-button. Otherwise just change the patch, and return to the patch you were using :-) Cheers! :-)

[@totzkiealquiza1711]

GuitarNTabs hello.. sorry if i will keep on asking.. how to make a tremolo effect or where i can find it? Sorry.. im just on this multieffect pedal..

[@GuitarNTabs]

It's okay, I'm happy to help you out - you can ask as many questions as you like ;-) You will find the Tremolo effect in the FX1 and FX2 block. Press the EFFECT-button and use the knobs under the screen to scroll to the FX1 or FX2. Then use one of the knobs, under the screen, to select the type of effects you want, and scroll till you find the Tremolo effect :-) Have a look at the Boss GT-100 Manual too, there're great information there too! Let me know if this helps! Cheers! :-)

[@totzkiealquiza1711]

GuitarNTabs thank you! Im soo happy heheh..

[@totzkiealquiza1711]

Can i ask help again? I am using fender 15g amp.. i just want to ask what is the best setting for clean (natural clean) because it sounds very bulky on amp. Pls

[@moss1transcendant]

I cant change the effect if im looping on my gt 100 is this normal ?

[@GuitarNTabs]

Hey there. What effects are you trying to change, while looping? Cheers.

[@vovokidx9691]

why my boss gt 100 version 2.11 is no harmonist please help me sir

[@GuitarNTabs]

Hi. I'm sorry for my late reply, I've been behind answering comments... It should be there? In FX1 and FX2? If not, then try a Factory Reset. I hope this helps. Cheers.

[@jdbruh6709]

Hey man! have you tried the four cable method?

[@GuitarNTabs]

Hey! Actually I haven't, atleast not yet, hehe! ;-) Ever since I got the GT-100, I've been using the onboard preamps, and I really like that! So I've basically just stuck with that, ever since! Right now it's perfect for what I need, but I might check it out! I've heard from several people that the 4CM should be the optimal way of using the GT-100 with your own amplifier - to really get the best of both worlds! Were you looking for something special, Jordy? Cheers! :-)

[@MontyDeane]

I have and I am using the 4cm. Clearly the best way to go. I too started just outputing mono to my amp input, then tried the 2 cable method to my return on the amp, and that made it even better. Then I discovered the 4cm. This is clearly the best option for me and works great. What it allows, is you to use the true crunch of your amplifier if you want to without using the od's on the gt100. And also allows you to use the gt100 for the other functionalities, and effects. So, use the great sound of your amp for its tones, and using the gt100 for the effects applied to that tone of the amp. Truly wonderful! For most of the newbies, tha capabilities of the gt100 are overwhelming., but as a growing musician, there is nothing better in my book. Enjoy!

[@GuitarNTabs]

Thanks for sharing your experience, Monty! That's really great to hear! I haven't tried or used the 4CM, since I just run directly to that PA/FOH, and find that great! At some point I might check it out! The GT-100 is great, no doubt! Cheers!

[@MontyDeane]

oh so you run into a PA. I had considered doing that, as a clean channel is a definite benefit. Thanks bro

[@GuitarNTabs]

Yes, I do, and I really like that! It's easy, quick and the sound is superb! I really get the full advantages of the stereo spectrum! :-) Cheers, man! Best wishes.

[@tracyluofengji]

how do u edit the patch's name?

[@GuitarNTabs]

Hey there! You edit the Patch Name by pressing both the Enter and Exit-button, at the same time, and then, as you press Enter, you'll have the option to name the patch. I hope this helps. Cheers.

[@daniellandry2166]

GuitarNTabs I don’t see where the « Enter » button is?

[@52klog]

How are the left and right led screens writing edited for my own comments

[@GuitarNTabs]

Hmm, I'm not quite sure I follow?

[@52klog]

@@GuitarNTabs like the screens in your video you have written on there on the right side HOW TO EDIT how do you change that

[@GuitarNTabs]

@@52klog - Aaah, I see now, thanks! Well, on all of the User presets, the ones you can edit and adjust, you're able to re-name the patch. Press the WRITE button, and it will allow you to re-name the patch, to whatever you need it to. I hope this helps.

[@52klog]

@@GuitarNTabs thanks

[@GuitarNTabs]

@@52klog - Np problem at all - anytime!

[@vincentsantiago2gmai]

I will like you to show output not clipping step by step for it don’t clip because everybody say that is clip and they don’t understand the system

[@GuitarNTabs]

Hey there, Vincent 😊 Thanks for your comment and request. Are you having problems with your output clipping? There's a video, here on KZbin, if you search "Boss GT-100 Input Calibration" which will adjust your input, coming from your guitar, and its pickups, and ensure that you're not sending too hot of a signal to the GT-100's input. I will add your request to my list of coming videos, thanks. I hope this helps, if not, then please let me know. Have an excellent day. Best regards.