Glenn DeLaune Demo - Boss GT-100 Programming Tips

[@robertwalker6874]

10 years old, yet still so very useful. Thanks amigo!

[@GlennDeLauneOfficial]

Yes that was one of the bug fixes in 1.04 I believe. If you press the CTL button the Accel will be highlighted, on the right screen under "Func" turn the knob all the way to the right until you see LED On/Off. Now the light will turn on.

[@benlloydarmitage6827]

This guy is an absolute godsend !!! Best and most informative GT100 instruction videos on here ! Well done Glenn !!! You are the BOSS 🤘🎸😊

[@GlennDeLauneOfficial]

Because if you use these things in what they can "4 Cable Method" which is hooking it up the the FX loop of an amp and the amp input at the same time you can have certain things hitting the input of the amp and other things like time based FX going to the FX loop which is after the amps gain stage. That's the advantage of being able to move things around in the FX chain. It's just like using traditional pedals.

[@jayscanlan2775]

I jsut got around to watching this video and took notes for anyone interested, these are just my quick raw notes: 2:25 **USING PHRASE LOOP PEDAL AS AN EFFECT** ------------------------------------------------------------------------ 1. GO TO "SYSTEM/PHRASE LOOP" ON FAR RIGHT (LH SCREEN). 2. GO TO RH SCREEN - TURN IT OFF. * (CLEAN SUSTAIN PATCH) GAIN = 50 BASS = 50 MID = 50 TREBL = 84 LEVEL = 49 "GREAT HARMONIC FEEDBACK TO SET THIS UP: (SYSTEM) GO TO (RH)ACCEL/CTL - **THIS IS WHERE YOU PROGRAM ALL THE PEDALS AND ASSIGNS** (8 DIFFERENT ASSINGN - CAN BE USED AT THE SAME TIME) *FIRST ONE IS ACCEL/CTL PEDAL -HE USES AS *LEAD BOOST* RH SCREEN=A&B SOLO FOR (2) AMPS -FOR 1 AMP SET TO A/B SOLO EXP PEDAL SET TO WAH SUB 1 AND SUB 2 PEDALS ARE FOR BOSS FS6 PEDAL ADD ONs HE USES THIS WITH EXTRA PEDALS, SEET AS FX1 & FX2 (SUB EXP IS FOR ADD ON EXPRESSION PEDAL) 5:17 **ASSIGNS** ASSIGN 1. SELECT(LH SCREEN. P.LOOP PEDAL/SOURCE (RH SCREEN)=ON Distortion = ON/OFF ASSIGN 2. = OFF ASSIGN 3 = DUAL DELAY(DELAY2)/TARGET CATEGORY. LVL=3/4 MIN=12 MAX=49 -THIS INCREASES BOOST FROM 12 TO 49. ASSIGN 4 = ACC/CTL PDL (RH SCREEN) BUMPS UP VOL ON PREAMP A FROM 40 TO 48 ASSIGN 5 = PREAMP B - ALSO BUMPS UP VOL FROM 40 TO 49 ASSIGN 6-7-8 = OFF 6:55 **PATCH FOR RUSH MUSIC** PATCH # U 20-2 --------------------------------------- ACCEL/CTL PEDAL SET FOR "A&B SOLO"FUNC (RH) SUB CTL 1 = CHORUS SUB CTL 2 = FX2 ASSIGN 1 - PREAMP A, VOL MIN=54, MAX=57 ASSIGN 2 - PREAMP B, VOL MIN53, MAX 55 ASSIGN 3 - FX1 (PITCH SHIFT) [ASSIGN ON/OFF ACC/CTL/SOURCE TOGGLE/SOURCE MODE (ALL OF THIS IS HAPPENING ON THE SAME PEDAL) ASSIGN 4 - DELAY D2, MIN=20 MAX=63 ASSIGN 5 - USING EXP PEDAL TO CHANGE PREAMP "A" GAIN FROM 3 TO 36(MIN-MAX). ASSIGN 6 - PREAMP "B" CHANGES FROM 3 TO 22 GAIN. ** CHORUS/FLANGE PATCH (PATCH U10-2) ---------------------------------------------------------------- [ AT THE TOP IT SAYS J=120 AB ] PRE A PATCH A/B ] GAIN=50 BASS=50 MID=50 TREBL=71 LVL=50 ACL/CTL=CHORUS ON/OFF SUB CTL 1 - TURNS EFFECT 1 ON SUB CTL 2 - TURNS EFFECT 2 ON ASSING 1 - PHRASE LOOP PDL TURNS ON SLIGHT DISTION: OD/DS MIN OFF-MAX-ON END OF PROGRAMMING FS-6 PEDAL HIGHLY RECOMMENDED.

[@GlennDeLauneOfficial]

Thank you for this Jay. I going to Pin this post.

[@GlennDeLauneOfficial]

Yes the effects are stellar.

[@GlennDeLauneOfficial]

Absolutely I would recommend it for gigging. I am using it live at least 2 to 3 times a week.

[@TheAxeman2112]

Glenn I was checking out the Gt-100 cause i have every boss pedal known to man and i was thinking about downsizing. Anyway I was blown away when i heard "Changing Seasons". I have a few songs that are very similar. I just wanted to tell you how great that song sounds to me. You know when you hear or play something and something like the melody gives you goosebumps. Keep up the good work with your music and the great tutorials. From one musician to another Your awesome dude!!!!

[@GlennDeLauneOfficial]

Thank you Eric

[@johnlovell1640]

Wow, thats a quick response and thanks for the tip! Also huge Rush fan myself and always looking at ways to re create that Lifeson sound! True story. I saw Geddy standing in the doorway outside my work in London... funny think is I was actually watching Rush 'Clockwork Angels live' on my computer, glanced up and there he was!.... I was checking if this was a hidden extra on the DVD that actually brings the man to your door!

[@retesmania]

always making good new videos!! i really learned from your videos a lot man....thanks!!

[@kevinfender1]

best guy on the net for explaining stuff sound man.. thanks glenn

[@GlennDeLauneOfficial]

Very easy to do. First press the system button and scroll to the Phrase Loop block. On the right screen set the pedal function to OFF. The press the CTL/EXP button and scroll over to an assign, set the Source to P. Loop pedal, turn the assign ON and set the Target category to whatever effect you want.

[@GlennDeLauneOfficial]

That's a good question Darren, I have discovered recently that it is best to have the FV at the very End of the Chain right before the Digital Block. That way when you have aq patch with some gain on it you can reduce the volume without affecting the gain of the amp.

[@jeffmilkey]

Just in case you are trying to use BOSS Tone Studio and you can't get your presets to come up...... On the GT-100 go to System / MIDI Settings. On page 2 make sure MIDI in select is set to USB (Auto) and make sure MIDI out select is set to USB

[@GlennDeLauneOfficial]

Yes this does have a great sounding "whammy" octave that can be assigned to a pedal and the harmonizer is pretty darn good. there are some videos of Rob Marcello demonstrating this.

[@kingeagle5045]

Hi Glenn again !! Thanks for anawer!!! I just heard Your reverbnation tracks And Ohhh man i love Your music And the Way You play And perform !! I spent the lást night flying with Your music !!!! You got a new fan for ever !!!! Thanks a lot for bring me joy And beautiful music into my life !!!! Cheers man !!!! Saludos amigo gran guitarrista!!!!

[@GlennDeLauneOfficial]

Thank you very much Sir.

[@GlennDeLauneOfficial]

Well as far which is better, that depends on the application. Both the HD's & The GT's have strengths & weaknesses. Which one is better should be up to you and the way you would use the device. Both are top notch products and you can't go wrong with either one.

[@GlennDeLauneOfficial]

Just checking. Sometimes the easiest thing gets overlooked. I guess the next thing would be to make sure you are properly connected. Guitar > GT-100 guitar in GT-100 effect send > Amp front input GT-100 effect return > Amp FX Send GT-100 L Mono output > Amp FX Loop return

[@GlennDeLauneOfficial]

Yes that is called "Manual Mode". I you press on the bank up & down pedals together the unit will go into Manual Mode. There you can assign different FX to all of the pedals and use it like a traditional stomp pedal board.

[@GlennDeLauneOfficial]

Thank you Dave, yes at the under 600$ price range I have to say for me, the GT-100 is tops right now. Although I don't have a digitech RP so some may disagree but I am using the GT-100 for Live concerts, small and large venues and studio work and it really performs well.

[@GlennDeLauneOfficial]

yes i believe there is a way. You would have to put all of the FX in the GT-100 into each amp block. A or B and go L&R out to your amps. That way everything that is in amp block A in the GT would go out of the L output and everything that is in amp block B in the GT would go out of the right output.

[@GlennDeLauneOfficial]

You can use the assigns to assign the tap tempo to the Accel or Looper pedal.

[@Bunkie112]

Thanks for the quick reply, Glenn! I will try that.

[@GlennDeLauneOfficial]

Ha, thanks for listening (and watching). Those background tracks are form my album "Fusion III"

[@GlennDeLauneOfficial]

No there is not a 12 string simulator. There is an acoustic simulator though. It works pretty good. That is located in the FX1 & FX2 categories.

[@GlennDeLauneOfficial]

First go to the Boss website and download & install the drivers for your Boss unit. Also while you are there download the Boss Librarian and install that after you install the drivers. Then hook up your GT-100 to your computer with USB and turn it on. Your computer should recognize the GT. Open Librarian and at the top of the window under "setup" make sure your Gt-100 is selected. This will enable you to load and save your sounds to your computer.

[@GlennDeLauneOfficial]

No you don't have to cycle through them. You set them up to have the same pedal trigger them all at the same time. For example, My lead boost has a 20db volume jump, 20db delay level jump, EQ Mid boost and Delay Level Feedback increase. All at the same time when I press my lead boost pedal. I show all of this in the video. Just follow along with it.

[@fjw3277]

Hy Glenn youre the best. You Show me exatly that what i Looking for. Before i used the Boss GT-10. Now i'm use the GT-100. I found it not so easy like the GT-10. But thanks again, youre the Best. Dear Franky

[@GlennDeLauneOfficial]

Yeah the GT-100 Librarian is basic and it's just good for saving & loading your patches. There will be a detailed editor soon though. If you google GT-100 Floorboard Editor you can find out about it.

[@GlennDeLauneOfficial]

Yup I agree, they should have kept the CTL1 & CTL2 labeling and that light should come on. I can't figure out why they did that.

[@FunknGrvn]

I'm sorry did you say something? I was busy listening to those badass tracks you had going in the background:) Nice job man!

[@GlennDeLauneOfficial]

Hi Tim, no not at the same time. You can only have 1 effect on FX1 & FX2 going. You can't have 2 FX at the same time on FX 1 & FX2

[@retrojoeman]

Thanks Glenn . Keep up the good work & thanks for sharing the knowledge ...

[@rsjb41]

Very informative video! I was trying to do what I thought was a simple edit to one of the patches I downloaded from you. I messed with it for hours because I could not figure out what all was going on with the push of one button. By the way on the Neal Schon patch, if you dump up the gains on the amps and reduce the delay a little, it is a Tesla - Modern Day Cowboy sound almost perfect! Love that sound.

[@GlennDeLauneOfficial]

Thank you very much for your support sir.

[@GlennDeLauneOfficial]

Make sure you have the pedal switch to momentary and not toggle. That may get it to work.

[@jtarrant74]

I also am playing it through the QSC 12's and I agree...sounds delish!

[@GlennDeLauneOfficial]

You should look at both the GT-100 and the POD HD500 as an upgrade.

[@GlennDeLauneOfficial]

Just turn the little knobs under the screens to change what the pedals do in Manual Mode.

[@GlennDeLauneOfficial]

You should look into the Traynor K-4 and K-2. These are really keyboard amps but they sound killer for these digital modelers. Currently I use the QSC K-12's with the GT-100. They sound very good.

[@GlennDeLauneOfficial]

That depends on what you would be using it for. Do you play live?? do you use an amp or go direct to PA.

[@GH3K3]

Man this brought back some bad memories of trying to program my GT-4; I think this was the first Boss multi effects unit with pedal assigns. That shit drove me crazy. The GT 100 does look a little easier, but the Helix looks way more intuitive; Roland has always had a problem with making their stuff for regular players rather than audio engineers. I had to sell my guitar synth it drove me so nutty. All those parameters and that tiny screen... oy veh!! While I'm here, Glenn, I'm wondering if you're intending to review the new GT-1 that Roland is launching today. Looks like a great companion to the Micro Cube for guitarists on the go. Thanks for all the videos. If only I could download your superior talent on the guitar... heh, heh. Maybe someday.

[@GlennDeLauneOfficial]

Thanks for watching

[@peeweesherman]

Great PRS, great player great teacher. Thanks Glenn.

[@GlennDeLauneOfficial]

You should either try going into the FX return of the amp or run in 4 cable method. I just did a video on that if you care to watch it.

[@MontyDeane]

Hi Glenn. Thanks for the killer patches. The gilmoure stuff is just awesome. Being that your the experienced one on gt-100, I want to use this for live gigs but when I switch patches, one might be really loud and the other might be low in volume. Is there something that I need to do to make sure there all the same volume when I change patches. I happens alot on the patches that use the volume/expression pedal. When I want to use wah function, i click it down. Because the volume pot is now wide open position and in wah mode ite blaring. Any ideas?

[@abyangko]

i watch some reviews and videos of gt-100 and sound not good to me..but when i saw your videos..i think i wanna buy a gt-100.,,you own a gt-10 and gt-100 and both are sounds really good to me...i think not the gt-10 or gt-100.,..i think.,,.its is you glenn.,.you program them really sounds good,.,your videos help me a lot and not just me.,.thank you,.,keep rockin' glenn,..

[@GlennDeLauneOfficial]

You can try the Slicer Effect in FX1

[@GlennDeLauneOfficial]

Well if you are using the 4 cable method with your JVM and you are happy with the results then maybe not. BUT if you are going into the front of your amp or in the FX loop then YES, the GT-100 is much better with this application. That;'s a great amp you got BTW.

[@Sid_music]

Thanks for your insights! I am not sure how the 'sound hold' feature under fx1/fx2 works, could you please tell me how to use that?

[@GlennDeLauneOfficial]

Doesn't Mac have an unzip program? If not then I should offer a Mac version but how?

[@paulbateman]

I f i were using midid to change amp channels, could i assign one of the pedals to send a midi signal and change amp channel??

[@Unit21100]

would you say the gt100 is the best on the market at the moment,,been looking at the eleven rack but keep coming back to this for an upgrade, currently using a gt8..cheers Glenn great work!

[@GlennDeLauneOfficial]

The HD500 is very good too and i do use it as well.

[@retrojoeman]

What are your thoughts on the GT-100 Librarian ? Will it ever have a app for the PC that will let you change settings like on Digitech Multi-effects Libraian ? It makes it a lot easier to have your board on the ground & a model of it on your PC to make the tweaks & changes . By the way I enjoy your reviews & music ...

[@retesmania]

hope you will loadup more videos like these ones man,, yoouuuu realllyyy rooooocckkkk!!.... thanks..

[@userpipe]

i noticed you have alot of gear but no mac? no a mac kinda guy? or is that just a extra keyboard, because i was curious what you used to record :) (great vid)

[@johnlovell1640]

Great tutorials. I bought the GT 100 based on your excellent 'sound on sound' vid.. Not sure if I am following this correctly, or you may have explained, but I am trying to figure out a way assigning the built in Vol/Exp pedal to control the delay volume as I use an Ernie Ball Vol for my volume.. thanks

[@GlennDeLauneOfficial]

Thank you John. That's a tricky one. First you have to turn OFF the volume pedal in the system menu. Then you have to go into the assigns menu and set the target to EXP and the source to delay Level.

[@ShvanKaban]

yeahh , everything is right connceted don't worry .. the problem is after i turn S/R on i can only use effects if i put them before the S/R in the effects chain if i put it after it it's not working for example reverb and delay doesn't work ..

[@n70amu]

Hi glenn it would be really great if you can show us how to program a great metal patch on gt100 and satraini sound.

[@FernandoCosta-mo7of]

Good day. I have a Boss Gt-100 conected throught the 4 cable method to a Marshal Amp. If I still want to use the amp simulation in the GT-100, where must I put the loop S/R (send/return); before or after the amp simulations. Please reply. Thank you.

[@ShvanKaban]

yeahh maybe , well thanks for your time my friend , keep rocking.

[@robsangg]

another great video glen! Will you consider doing a comparison video between the hd500 & the gt100 or give your opinion of which you prefer. I own the hd500 and would like your take on which you find that a) sounds better, & b) is more user friendly, as I am considering buying the gt100.

[@biggibby54]

Always a big fan of your vids sir! I"m thinking about getting the GT-100 because I can't get the sound I want from my HD500. I still play through my XTLive...to me it sounds better than my HD500...

[@miko8473]

Hi! Glenn....I love your demo and its very nice..anyway if you could just help..how to set my delay into 8th dot note for gt 100.....thanks!

[@GlennDeLauneOfficial]

What amp are you using? Your S/R Block is ON right?

[@jessereyna7408]

Hi glenn,thanks for that Gt-100 video setting intsructional video;but i was wondering: Is that FS-6 pedaljust for a two amp set-up? or can it be used to beef up your over-dub guitar(Live-performance)effects set up? I guess what i'm trying to ask;is there more than one way to get multiple guitar effects parts while you're playing live or in a studio setting? I f i were playing in a band with tow guitar players;this wouldn't be too much on my mind;but if i were the only guitar player;yes it would.

[@marmadukewinterbotham2599]

Great video, thanks. I don't get Assigns. If a single patch can have lots of assigns how is each assign activated? Thanks.

Hi Glenn, can I program a assign pedal to change the Divider function between Dual (AB) and Single (A or B)? Or I only can use one kind of divider for patch? thanks!

[@ShivrajKarkera91]

I appreciate the time you give to explain these stuff to us .... I hav a query .. Im more into effects, like Tom Morello solos .. Is BOSS gt-100 ideal for me ? Can I assign a "Whammy" effect on the pedal, like octave shift controlled by the pedal or sumthing like that ... (The solo of song "Killing in the Name" is exactly what Im talking about) ... and is the Harmonist good on this ?? ... thanks :)

[@michaelhuggins8896]

THanks for your work Glenn. Do U have any words of wisdom regarding the "System settings pref." area? Watching just one of your basic videos about programming my GT-100 has helped me polish up some of my more complicated patches! 

[@PaulAdamssongs]

Had trouble sticking with you. Background music kept making me drift away :)

[@painnutplay9]

Oh, I forgot. I'd also like the led to flash at the speed of the tempo set.

[@joarnott8618]

What a shame! I might have no choice but to get a DD-3 pedal separately, or something with equivalent hold function which includes delay. Thank you for your very fast reply! :)

[@ShivrajKarkera91]

Hey great job man, one thing, when I use pitch shifter in FX 2 to get a virtual half step tuned sound, i get an ugly flanger sound, how do i get rid of it :(

[@jessereyna7408]

Sorry my typing isn't that great;but i'm wanting to to multiple effects part playing if need be Glenn? But i never seen that FS-6 pedal from Boss i'm assuming;so i thought i'd shoot you a question or so ok? Thanks Glenn. Take care.

[@tonylopez781]

Great vid Glenn, could you tell me how to set the EXP pedal to turn on the TUNER whenever the pedal is in the OFF position please? Thank you

[@MREGDF]

HI GLENN. COULD EXPLAIN HOW TO SET THE GT100 HARMONIZER TO GET THE 2 GUITARS SOLO OF HOTEL CALIFORNIA ( ROCK VERSION). I ATTEMTED TO DO IT BUT I COULDN' T. THERE IS A NOTE THAT SOUND OUT OF TONE. WITH MY OLD ZOOM 3030 I GET THE RIGHT HARMONIZED SOUND EASILY.

[@painnutplay9]

Hello. I want to use CTL to turn on/off delay, and use the p.loop pedal to control delay tempo and other effects tempo as well. I already managed to det CTL and also P. Loop pedal to tap tempo delay. But I can't find the way to control other effects tempo. My idea was to be able to set tempo on all time based efffects like delay, tremolo, phaser etc with just tapping one pedal or at least 2 separate ones (one for delay and other one for other effects). Any idea how can I set global tap tempo for all effects?

[@GlennDeLauneOfficial]

Thank you very much

[@MikeC-cm7pc]

Hello Glenn love your demos I noticed you built a Frank Marino patch for the Helix, I was wondering if you can create a patch like that for the GT100 I find your tone was dead on and would love to recreate it on my GT100 cheers

[@Chandlerbingeling]

hey glenn. i really like your videos! i got a boss gt 100 now..but...is it possible to have more than two of the fx effects?...especially in the manual mode, for example...have a vibrato..a flanger AND a octave pedal?

[@bossgtdiez10]

HEY BRO,, been a while just wanted to sat hi... nice TSA15 by Ibanez.. got 1 with the matching 12" cab.. like it very much.. how do the pre-amps on this unit compare to the gt-10 line hd 500???

[@keithdarling8290]

Hi Glenn, I've been watching your videos on both, the GT100 and the GT1000. Would you mind letting me know what you're using to control the Tap Tempo function on each unit please? Maybe I'm just missing something, somewhere. I'm at the point that I'm now ready to make a choice between the two. Whichever lays out better as an actual Floorboard with both, Tuning and Tap Tempo is going to be the BIG WINNER...LOL! Thank you for your help and time, Keith Darling

[@vettster89]

Hi, Glenn. great video! What I am trying to do is. I need to assign a switch to go between my Marshall tube amp and the GT100. Is there step by step instructions on how to do this? Plus I can't get tone studio to load onto the GT100. I'm having a heck of a time with this thing. any help would be greatly appreciated.

[@andysaavedra7527]

It goes straight through a Fender Super-Sonic, and the amp goes through the PA. I really like how the new set-up is for the new unit. So what is your opinion on it? Is it worth upgrading?

[@ShivrajKarkera91]

Please can u tell me how can I create a virtual Kill-switch effect on gt 100 as my guitar doesn't have one... I want an effect like the intro of "Know your enemy" by Rage Against the Machine {Tom Morello}

[@GlennDeLauneOfficial]

People have problems with the Sound hold. I don't think it works properly.

[@joarnott8618]

Hi Glenn, I am trying to use the sound hold function in the same context it could be used with the Boss DD-3 pedal... I need to use a sound hold with a delay time of 500ms, and one with a delay time of 800ms. I can't work out how to add a delay time for the sound hold on the Boss GT-100 and am hoping you can help! Cheers, Jo

[@stevenlouth8565]

Hi Glen great informative tutorials could you show me how to assign different preamps in a patch for example I want to alternate from a clean preamp and a let's say the BG drive amp Thanks Glen !!!!!!!

[@ShvanKaban]

hello glen , great videos from a pro congrats , i have a question my friend , Im trying to use the gt-100's 4 cable method , i do the method allright , but i can't use the volume on my gt-100 and nothing works on the effects chain after the send and return , say if i wanna use reverb i have to move it and put it before the S/R .. please help thanks.

[@marmadukewinterbotham2599]

Sorry, I didn't explain very well. The ACL pedal assigned to a boost to a patch's volume, I understand. But you seem to have other FXs also assigned to the same pedal for the same patch? So whilst playing how do you cycle through those? I've a feeling I've totally misunderstood here. :O(

[@mlunacantu]

Wow, Love that Guitar, How much was that Guitar & what Model would that be....By way: Love Your Guitar Sound 'Glen' , I just ordered my Boss Gt-100 online waiting for it to arrive. Can't wait!! Blessings.... : )

[@mysteryman32768]

also is the editor librarian out for the gt100 or not yet? I didn't see it on bosstonecentral yet.

[@LunaGuitars68]

Hi..just got the GT100 and trying to figure everything out. I have 2 tube amps I like to use at the same time. One sounds good with effect pedals going directly to the front of the amp and the other amp sounds best with effects going through the fx loop. Do you know if the gt100 would have the capabilities of running a single patch, splitting that patch and running the signal to the front end of one amp but through the fx loop of the other while keeping both amps independent of each other.

[@anthonymudge755]

Hi Glenn, Amazing videos thank you! I have a H+K Tubemeister 18 with a 2 stage overdrive channel. Is it possible to use the amp control function of the GT-100 to operate both stages? Many Thanks for your passion and dedication to your craft!!!

[@GlennDeLauneOfficial]

Sure just do a google search for: Boss FS-6 and you will surely find it from many online stores

[@GlennDeLauneOfficial]

you mean my patches for this?? on my website

[@Aristowi]

I like the GT-100 but if you can also assign the accel to an external ctrl pedal and other functions to the accel then why did they label that pedal and got rid of the LED indicator? That doesn't make any sense, I liked how the GT-10 just said Ctrl 1 and 2 and switching to phrase loop by pressing both bank pedals at the same time. I like the unit, the color, the 2 screens, the construction, the menus, but the pedal layout is keeping me away from upgrading from my GT-10. What do you think Glenn

[@dibyarupray4364]

The system changes you make like turning off the phrase loop feature..is it for only this particular patch or the looper is turned off for all the patches ??

[@wb1969]

Hey Glenn: Love what you do! I am looking to upgrade from my Gt-8 to the GT-100. I do many solo gigs going direct to the mixer and and on full band gigs I use a Tech 21 Power Engine 60. Do you have tips on basic settings going direct to mixer? I'm playing a wide range of material from smooth jazz to classic rock and blues to standards and country....

[@GlennDeLauneOfficial]

wb1969 yes the GT-100 can do those sounds very well. Just use the global EQ to shape your sound.