Рет қаралды 62,034
This video shows how to glue on lower rear quarter panel rust repair patch panels using SEM Impact Resistant Structural Adhesive. Tools, Materials, Lakeside Merch below:
🔥 Air hammer bit for Molding Removal: www.dentmagict... (similar to the one in the video)
🔥 Die grinder: www.harborfrei...
🔥 Cut off wheel for die grinder: www.harborfrei...
🔥 Masking tape: 3M 06652 Automotive Refinish Masking Tape
🔥 Sheet metal ripper bit for air hammer: shop.snapon.co...
🔥 Tin snips: Wiss Aviation Snips
🔥 Electric Metal Shears: www.harborfrei...
🔥 Patch Panels: raybuck.com or millsupply.com
🔥 Electric sander/polisher: www.harborfrei...
🔥 36 grit fiber resin discs: benchmarkabras...
🔥 Small sander/grinder: Astro Pneumatic 222S 5" Sander
🔥 Large Vise Grip clamps: www.harborfrei...
🔥 1/8" Drill bits - www.harborfrei...
🔥 Body hammer: www.jbtools.co...
🔥 Glue: SEM Structural Impact Resistant Adhesive - Part number 39757
🔥 Lakeside Merchandise: brothersdesign...
sortOption=descend_by_created_at
/ @lakesideautobody
#Rustrepair