Waste Oil burner Flame control and automation.

Finally I'm back. Thanks to everyone for the support and messages over the years. I hope not to let you down with my future offerings and to grow the channel up to and past 100K subs.
This vid shows how controlling waste Oil Burner air and fuel can make for stable running burners. Drip feed is good and well for short runs when you are with the burner but to run it for many hours without constant adjustment, some automation and control is needed. I use a cheap Pulse type car Fuel pump with an electronic Cycle timer. This is the same principal used by the Chinese diesel heaters and one I showed may years ago in other vids.
By being able to feed a precise amount of waste oil into the burner, variations from oil viscosity and tank level changing are avoided. You can also take the waste oil fuel from ground level which makes handling much easier. The Blower is Controlled with a PWM controller available of Fleabay and other similar sites to match the air output to the fuel pump to produce a constant , stable flame.
I hope you all find this video and the ones to come as entertaining as before and thank you again for all the kind messages of support, concern and encouragement. It was much appreciated and extremely Humbling.
I hope to be doing many more waste Oil, Solar and other videos on a regular basis from now on and improve my content as I get back into the swing of things.

[@Levikj]

2021 has been great, oil burner is back, photon is back.

[@glumpy10]

I'm not a scratch on Photon, Andy is a Genius and I am happy to see him back too. I'll try to make my vids as entertaining and interesting as his though.

[@Levikj]

@@glumpy10 Man your videos are just as entertaining. He is the king of electricity on KZbin and you are the king of fire. both very very satisfying genres to watch

[@moonshiner2977]

@@glumpy10 Andy may well be a genius in his field but so are you in yours ! You Sir have saved me hundreds and hundreds of pounds so far and that will run into the thousands because of you ! I now heat my entire house from oil based entirely on your design. :)

[@414RadioTech]

@@glumpy10 I really love the waste oil burner barrel that is a lot of fun for the kiddies i'm thinking about doing a similar project that involves screening out the sparks to minimize any type of injury in case somebody were to get burned by a few sparks my goal is to use something like what's inside of a catalytic converter and put that on a screen of some sort on top of the barrel itself so that way I can still have fun but reduce the number of sparks so that way I don't accidentally start fires just in case it's a bit windy out but anyways cheers to you mate if you desire so by all means feel free to email me [e-mail]

[@glumpy10]

@@414RadioTech Don't know what you would use for the sparks that would stand up to the heat. Even Cat Honeycomb would melt I believe. I Picked up a Cat ( off a car, not the type that sits on your lap) some time back and was going to use that for a Vid. Bit of pre heat, bit of oil and off it will go... For 5 Min anyway. There really isn't a lot of sparks with oil and the few there are don't tend to travel because the majority of them are burned before they leave the chamber .

[@madmike9530]

I finished making mine tonight and... holy hell 😮 it was shooting out 6 foot flames and sounded like a jet taking off in my backyard. 😂 I watching your video to maybe learn how to harness its power. Wish me luck.

[@AJRestoration]

Welcome back! KZbin just got 100% better!

[@benchilds2247]

The fabled return is upon us

[@welchtemplarmotorcycles2933]

Ffs yes dude! Good to have you back!! Where the bloody hell have you been ? 😀✊

[@glumpy10]

Man You are quick on the draw. Thanks for the encouragement mate. Very much appreciated!

[@welchtemplarmotorcycles2933]

@@glumpy10 Made my day dude. Been waiting for it. Stuck in hospital doing nothing that why quick response. ✊

[@captainjerk]

Indeed, I am silly enough to watch these videos! And I'm happy to see you back here, burning oil and delivering the humour we love! Thanx for a great vid! You are an inspiration to generations of people that can no longer grow eyebrows! :D Welcome back buddy

[@dimitar4y]

matches haven't been discovered again XDDDDDDDDDDDDD the comedy of this guy

[@bmoraski]

YES ! He is back. You have been missed. Was just thinking about you the other day while cleaning up my subscriptions. Looking forward to whats next.

[@bryonmanske]

Your videos inspired me to experiment with and build my own oil burners years ago. Great to see new content and love the personality you put into the mix. Cheers from Iowa, USA.

[@bryonmanske]

Also the mention of aussie50 was great. The memory made me smile. Ed was an inspiration and is missed more than I can express with words.

[@jamesasteria]

Yasssss. Welcome back. Subscriptions, notifications and patience paid off :)

[@Boxferret]

The master returns... things where getting a little too quiet around here ! One to savour with undivided attention and a nice chilled beverage.

[@glumpy10]

Hope it lives up to expectations and I'll try to make each and every vid better and more entertaining.

[@AJRestoration]

Yes yes yes! Best day ever!

[@doug4465]

It is great to see you again!

[@rahtari2000]

PERKELE !!! Thank You for coming back to our life !!!

[@Askor200]

Great to see you back. Good idea with the air/fuel automation!

[@torvusjunction]

Oh yeah, The king is back!

[@grantw.whitwam9948]

Great to hear from you again!

[@teckiepete]

Welcome back!! So good to hear you again! Don't forget the health and safety notices!

[@stevearehart313]

Glad to hear from you again!

[@davidbryan9568]

thank god he came back! I love this guys videos!

[@algordon5843]

Good to see you back.

[@okielicious]

KZbin just got more exciting! Glad to see you back ! Looking forward to more oil fired fun..

[@Michael-db1ce]

Glad you are back. One of my favorite youtubers

[@robertperry3483]

Nice to see you back .A Big Hello from Tennessee!!

[@johannesmajamaki2626]

Oh this is a delight! Storing my old frying oil for some later use I was reminded of this channel and the little back and forth we had some amount of time ago. Looks like you did make your return! :D

[@randymccain6857]

Glad to see your back. I've missed your videos please keep them coming. I hope all is well.

[@miky-275]

Great to see your back

[@squirrellysquirrels1167]

Always liked these. Was messing around with my burner earlier today. Made me want to watch your scrap melt video.

[@DarrenBoss1984]

Oh yeah!!! Great to have you back mate! 😀

[@chrisdiaz5166]

Thank the gods you have returned to us. Epic!!!!!

[@timothymoore7890]

Welcome back!

[@stephengordon8968]

Keep making videos and ill keep watching them !

[@tomahawk3437]

So glad to have you back youtube just wasn't the same without you. Hope all is well and hope to see lots of videos back in action soon.

[@electronicscrapper4956]

Your back!!!!! I've been telling people about your channel for years. Damn glad to see a new video

[@cptrikester2671]

The commentary has an edge. Great perspectives.

[@andyc265]

10:00 Yes. Welcome back! I saw an Oil Burner video recommended and thought it was an old one - was pleasantly surprised to find out it was a recent upload.

[@charleslangshaw4860]

Glad to see you’re back I have missed your videos

[@bartandlydia]

Man, I had forgotten about this channel, so glad I’m subscribed! Welcome back!

[@karlsoffroad8609]

I just installed a homemade oil burner in my outdoor boiler. Works great and I get my waste oil for free. Love the channel, I hope you get back to making videos.

[@beetlearms]

Holy hell! Welcome back! Missed your videos!

[@chadhayes8310]

Glad to see you back!

[@philtube717]

great video welcome back

[@betadoctor]

The legend returns ! ..

[@TheUltimateRecycler]

Man, you'll kick the Earth out of orbit with that thing!!! Loved it! Welcome back mate 👍😁

[@hayleybmadiggunter6798]

The Burt Monroe of oil burners. Bloody good videos.

[@s.hutton2100]

Great to see and hear you again. It's been to long. Cheers Stephen

[@hblandim720]

GREETINGS FROM BRAZIL, OIL BURNER!!! GREAT, GREAT NEWS TO HAVE YOU BACK!!! FICAMOS TODOS TRISTES E CHEIOS DE SAUDADES. VOCÊ CONQUISTOU AMIGOS POR TODOS OS LUGARES DO MUNDO.

[@kirkray6344]

Glad your back. Being American it’s a shame we are all about safety glasses and gloves. I never use em, and have all original equipment at 62

[@larryswindcatcher]

Welcome back mate. I know it is hard to believe but I really enjoy your videos and sense of humor. Oil burner has enormous possibilities that need further development. Good Luck.

[@JoshKilen]

very nice to see you are back.

[@markward4176]

Great you're back! Enjoyed the video

[@johnmulrine4429]

Good to have you back

[@jeffcameron7853]

Great to see you back mate!

[@jamesb1221222]

Holy shit, Welcome back!

[@00_negative]

Glad your back!

[@jpboley8373]

Welcome back. I was hoping you didn't burn yourself up. I've used your designs in my home charcoal plant. Thanks again for all your hard work! Educational and entertaining.

[@hotrod639]

Love the videos! Good work mate!

[@k_froggy]

Holy crap YOU'RE BACK!!!! Missed you man. Looking forward to the new content.

[@123jeez]

My GOD!! YOU ARE BACK!! And so are PhotonicInduction.... what the hell?! :D ME SO HAPPY!

[@mcormier7130]

Thank you for your information on the foundry burner , that's what i've been looking for . melts aluminum in 4 minutes with waste oil , wow i'm gonna melt 5 tons of it for a special project with a homemade rotary unloader . Thanks again from Canada.

[@MattsMadnessOfficial]

glad your back

[@wayneday3916]

Welcome back been 5 yrs waiting for your next video.

[@glumpy10]

I think I have been promising to come back soon for about 3 years but finally the time was right.

[@keiththoreson3166]

you have the best oil burner vidios out there, I just build my first one based on another of your videos. I'm going to build one like this for bigger parts. thanks for giving us the know how to what we have all been thinking, " How do I use all this old oil to melt things." thanks again.

[@alanmumford8806]

Glad to see you back. My old subscription even survived! We need folks like you in 2021 :-)

[@glumpy10]

Thanks mate, Appreciated.

[@ArcaneTinker]

I'm still silly enough. Welcome back, friend!

[@rodneysrepurposingrecyclin3821]

Man am I glad to see you back mate.

[@waltersaunders7699]

I thought you were a figment of my imagination like a plume of diesel. Good to see you back

[@8386hj]

Good to see your videos again.

[@idus]

This brought a smile to my face. Freakin sick!

[@larz0001]

welcome back

[@ProlificInvention]

Good to see you! Excellent video.

[@dennisnorth1250]

Yeah m8 still silly enough to watch the best...so good to see you back on ..we do have matches here in europe.

[@SabreCycles]

On behalf of myself, as well as many others, Welcome Back! It's great to hear your voice again! We have been patiently waiting for this day! As a side note, in the north, Canada still loves matches, please continue as you like! After all, this is your channel and we all luv you and the content!

[@glumpy10]

Thanks mate. Very kind of you and very much appreciated.

[@eddee5191]

Hey D, greets from ZA.... Glad to see u are still flaming good!!... Keep it spinning....E

[@lifeiswhatyoumakeit5505]

You’re back🍺🍺🍺🍺👍 let the good times roll get my fix of oil 🔥

[@alfredlebon2767]

Your comment about Americans using torches instead of matches is so true. I wondered the same thing several years ago. Then I looked around my home. The water heater, gas logs and gas furnace have electronic ignitions. There is ALMOST nothing which requires a match (or a pocket lighter) these days. We do have 6 "six day prayer candles" (candle inside a tall glass jar... ) We use them for emergencies during black outs. Have book matches stored with them but I usually use a 'barbecue lighter' instead. (=Guess I need to buy a torch so I can assimilate with all the *other panty-waisted wusses* ... ) ;^) Only compensation is over 50% of us still own our firearms! BTW, long ago you knew me as "OgMandin0."

[@TheJeffMiller]

Rich to warm up, lean and mean for heat. Works every time.

[@MM-jg5pt]

Never a dull moment to watch your videos mate. Hello from Palau. I thought someone hacked your channel but when i recognized your voice i turned to my wife and said, "babe, he's back". Snd she respond, "oh that guy?". I thought only me but even my wife enjoyed watching your projects, but most especially the safety tips. I was assuming you had a strict and whiny neighbor that made you stop creating videos. I have one built project that i copied from your project and it was blasting powerful flame. Replica of your burner when you first tried out syphone. Once again welcome back and dont let yhe flame go out. 🙂🙂🙂

[@finnroen2334]

Welcome back.

[@Lawnmowerman02346]

Glad to see you back ! You must have gotten rid of those new neighbors . Now you can get back to it .

[@simonpetermungai1973]

Wonderful. I missed you.

[@p38arover22]

Welcome Back! We've missed you.

[@Drew-in-NoDak]

was literally just thinking of you, so I look and new video 12 hours ago!

[@theusconstitution1776]

I was drawn to your site by two words ❤️‍🔥OIL BURNER❤️‍🔥 THATS WHAT I DID FOR THIRTY FIVE YEARS everything oil ❤️‍🔥 I even made SNOW with an oil burner😳 so I love to see your videos back! I LOVE YOUR SAFETY WARNINGS❤️‍🔥 good luck to ya buddy I hope you guys can survive your government❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥

[@sleepysopalsandprospecting6170]

Glad to see you are back and even though I'm subscribe the notification thingy was off so I watched your next video first lol.. ps the bell on now.. thanks for shareing Regards Sleepy

[@craigbarnes3096]

Cheers mate can honestly say that I've never been so wrapped to see a notification

[@cobbleup]

I like it. Control is the way to go.

[@undernetjack]

Woohoo! My Favorite “Old Flame”.

[@danielashbaugh9462]

Yeah mate love those videos hope everything is alright there.

[@tomayrscotland6890]

Hi Sidney' A nice warm video, I am sitting here frozen in Scotland; Just watching your video has het me up a little. I am working on my Burner just now but I had a let down?. My local garage gave me the free oil he was glad to get rid of it, But? Bloody god damn it was full of water so he is sacked. I wasted two hrs trying to get my burner up and running, But I will come back next week with maybe good news. Take care great entertainment.

[@glumpy10]

If you put the oil in a drum or jerry can, the water will go to the bottom and you can draw the oil, carefully, off the top. Alternately use a drum with a tap on the bottom and drain off all the water by tilting the drum and then you should have dewatered oil.

[@philippe5518]

Welcome back. I'm glad I never cancelled the subscription, I would have missed out. Half way through this latest video I suddenly thought "What's going on??? Not Safety tips??" And then you went and redeemed yourself. But I thought that last safety poster was meant to warn about not drinking the oil.

[@glumpy10]

Geez, you could be right mate! Perhaps I mis interpreted that. I'll have to correct that in a future Vid.

[@danielhildebrand7684]

Hey! You're number ONE!

[@CPUDOCTHE1]

It is good to see that you are back. You need to put a warning at the beginning for people that live in California that just watching the video with cause cancer.

[@glumpy10]

Or have a Heart attack! I have a friend in Cali. Got to admit I have to check the things he tells me from time to time that go on there but the only thing I have every found is he understates the stupidity and madness of the place. Then again, Lot of things NOT to be proud of going on in Oz of late as well.

[@hariseldon2577]

Missed the safety advice. Good times are back. I feel safer already.

[@427med]

HOT DAM HE,S BACK ;OOKONG FOR HIM FOR YEARS Jon IN KY

[@plastictolstoy2126]

You have inspired me to buy a pair of safety thongs and safety singlet just for these projects! After watching you safety tips I felt irresponsible and stupid without these items ;}

[@KD0LRG]

Welcome back thought you fell in the burner!

[@geneplummer6645]

i thought his neighbors had him commited lol

[@glenwarren404]

Good to see you back. Long time. Looked ya up but nothing

[@colinwilson210]

We never left you, we just missed the notifications :-)

[@onetun6953]

Oh man . I came inside after melting 80 kg alloy today and look what I've just found nd. HEAVEN