GM Window motor replacement: SILVERADO, SIERRA, TAHOE, YUKON

[@floydindursky2973]

Thank You very much!! I changed mine on my 02 Silverado Stepside today after watching your video! Works Great!!

[@dannyjohnsonsgarage]

Great to hear!

[@jakenoneya4087]

Thanks man..simple and quick video..no b.s exactly what I was looking for

[@dannyjohnsonsgarage]

Thanks! Check out my gm playlist for more! kzbin.info/aero/PLIjr-uSYDZi42E1Ceb5_pBK-e7phLJxBN

[@originaldanman]

You can't pull the motor off the heat housing. You don't have to remove the regular either but you have to take the screws out, then you can twist it enough to get to the 3 screw in the back.

[@blakekong47]

Took forever to find if I could just replace the Motor thanks a lot didn’t want to pay over 100 just to have a working passenger window Edit: would not recommend doing so yes it can be done but no it was not worth the extra time I highly recommend just taking out the whole assembly to swap motors as it’s really hard to get to the back left bolt took me about 45 minutes from start to finish

[@shadowopsairman1583]

Use a drop cloth to not lose fasteners ive yet to see a unit with just the bottom part sold

[@jesusalvarado6074]

I wish I would have seen your video first instead of another one! I would have been done a lot sooner !

[@robertrumfelt7843]

Outstanding video. Edited down so it's not 20 minutes long. Well done!

[@dannyjohnsonsgarage]

Robert Rumfelt Thanks! I’m glad you liked it. Here are other videos on that truck if you’re interested kzbin.info/aero/PLIjr-uSYDZi42E1Ceb5_pBK-e7phLJxBN

[@rolandogallegos1740]

Very helpful, thank you!

[@FATDADDYSOUTDOORCOOKING]

Good job almost one handed

[@Silvr_3.7]

Same here to figure out how to stick my brothers truck and saw mustangs. I’m in the right place 😂

[@dannyjohnsonsgarage]

my mustang. regulator video is probably more help than this one too lol

[@dannyjohnsonsgarage]

kzbin.info/www/bejne/maKUf2qIprxnmZY

[@DriverDave79]

What year Vehicle are you working on? Looks completely different from my ‘99 Tahoe

[@damonsensabaugh7085]

You can't get to the back bolt when doing there. It's virtually impossible.

[@jeffreyscholl2586]

Didn't complete the job by taking the motor out.

[@dannyjohnsonsgarage]

Jeffrey Scholl Didn’t need to. Tap on the motor first to see if it needs replacement or just a tap

[@dannyjohnsonsgarage]

kzbin.info/www/bejne/maKUf2qIprxnmZY

[@dannyjohnsonsgarage]

kzbin.info/www/bejne/kJiwmYmLibRkY6c