On this day, July 22nd, 2023, I will use this video to help me do the front brakes on my 2007 Denali. Thank you!
@williamwatson35672 жыл бұрын
Note : 2000 Yukon XL , When Replacing Disc Pads Only, Just Remove the 2- T-55 Torx Bolts on the Caliper, You Might need to Fight the Compression of the Piston Cups to get Clearance with the old Pads, in order to Pull Off the Caliper.... But it Will Slide Off...! Then Compress the Cups with a Compression Tool or a 6" Clamp. Pry out the Disc Pads...and Replace with the New...just as You Took it Apart.Then Reload the Caliper...and 2- T-55 Bolts, Torque Them, Start Your engine, Pump Your Brake Pedal...to Bring the Piston Cups Back into Position on the Pads/ Rotor. Do the Same on the Other Front Side. Note : No Need to Remove the Heavy Brackets... = Quick and Easy. Always Use Jack Stands...!! Your Welcome. BillinL.A. 12-05-2021. 5.3L
@royquesada5295 Жыл бұрын
Really should show what your doing back there. Showing yourself really doesn't help.
@royquesada5295 Жыл бұрын
The title did not include replacing rotor.
@SQTierHog8 жыл бұрын
Sir, thank you! Advice on caliper compression, Loctite, torque specs, greasing, etc. is much appreciated. Inspection and cleaning of parts, also included here is simply must while it's all apart. I'll have your video goin' as I work on my Denali. Again, thanks for taking your time to help us all out!
@timsullivan91352 жыл бұрын
I notice you did not open the bleeder valve when you compressed the caliper. Won't that damage the anti-lock system?
@TheKingA87 жыл бұрын
I have a 07 GMC YUKON XL. I changed my driver side rotor and pads. Now I'm trying to do the passenger side. I'm having a hard time getting the caliper bolts off. Which way should I turn the bolts??
@djgrandedanxingentertainme51747 жыл бұрын
Este compa no sabe esplicar bien
@mr.breadNwater7 жыл бұрын
I've got a 2011 GMC Yukon Denali XL AWD, what's the torque specs for the caliper mounting bracket and for the caliper bolts too? I'm finding conflicting info on the net.
@803mastiff95 жыл бұрын
Professional work and Professional video with good tips. My new Delco pads also specified positioning the wear indicator opposite the bleed valve i.e. bleed top indicator bottom....Appreciate the video
@tmyeshia728 жыл бұрын
Do you always have to replace the rotor when change the brake pads? And do I follow the same step on a 1998 Yukon GMC?
@amsautomotive8 жыл бұрын
+tmyeshia72 It is always a good idea to replace or turn the brake rotors when replacing the brake pads. The steps on all brake pad replacements will be similar to this video.
@Euro__YT4 жыл бұрын
Hard to take caliper bolt
@michaelriley367711 жыл бұрын
Very informative video, lots of tips for replacing pads in any american auto. Thank you!
@lifesaninsidegame77515 жыл бұрын
Great vid! Thank you! 👍🏻👍🏻
@sanpedroray919 жыл бұрын
I have a seized t55 bolt afraid about to strip took me 3 hours and still could not get it free tried heat PB blaster and cheater bar still stuck... help plz
@amsautomotive9 жыл бұрын
+sanpedroray91 The problem is a seized bolt going through the Steering Knuckle. I do not recommend heat being put on the knuckle this can fatigue the metal and cause a premature failure. The real option is if the T55 bolt is loose from the treads the slider will need to be drove out using a good punch and heavy hammer. If the bolt is still locked to the threads I recommend using a good impact wrench to break it loose. The impact will work much better than trying to use a breaker bar. - Randy
@sanpedroray919 жыл бұрын
+AMS Automotive thanks bro i apriciate it I'll give it another go
@WBOS729 жыл бұрын
Thank you so much. Will these toqrue specs be the same on a 2011 gmc 1500 4x4?
@amsautomotive9 жыл бұрын
The torque spec in the video is for a certain video. The spec for the 2011 GMC 1500 4x4 is 77 ft lbs. It just happens to be the same.
@gabrielavila47586 жыл бұрын
How bout for 2017 yukon?
@montehartman91128 жыл бұрын
Nice job, well done.
@FracturesYT8 жыл бұрын
Manufacturer control replacement
@FracturesYT8 жыл бұрын
Manufacturer control replacement for Chevy Tahoe
@mr.breadNwater7 жыл бұрын
Is bleeding the brakes necessary when replacing the rotors and pads on a 2011 GMC Yukon XL?
@classic24hrtowingreferrals285 жыл бұрын
No mention of what size bolts. Excuse me FASTENER. BOLT