GMMK Pro Upgrades and Modifications Guide + Sound Comparison - Flex Build!

🛒 BUY IT AT SHOPEE 👉
GMMK Pro: shp.ee/axhhajg
Glorious Panda Switches: shp.ee/g32a48y
Polycarbonate Plate: shp.ee/vca69s4
Glorious Coiled Cable: shp.ee/3egf56e
Glorious Panda Toy: shp.ee/qur473q
Glorious Keyboard Case: shp.ee/ixziuus
GMMK Pro Knob: shp.ee/z9euyke
Durock L7: shp.ee/sriwiae
🛒 BUY IT AT LAZADA 👉
GMMK Pro: bit.ly/3xFKldk
Glorious Panda Switches: bit.ly/3iXlspB
Polycarbonate Plate: bit.ly/3xDPhPX
Glorious Coiled Cable: bit.ly/3qf0kN2
Glorious Panda Toy: bit.ly/3vMTL5F
Glorious Keyboard Case: bit.ly/3cZuOx6
GMMK Pro Knob: bit.ly/3zT8z67
Durock L7: bit.ly/3xYM4LL
Mars Colony Keycaps: bit.ly/2T4CqI9
Check out Rotobox Philippines 👉 / rotoboxph
Deskmats by The Deskmat Foundry 👉 thedeskmatfoundry.com/product...
Wooden Artisan Keycap by Tokeys 👉 / tokeyscraft
Custom Coiled Cable by Kables 👉 / kablescc
Time Stamps:
0:00 - Intro
1:04 - Initial Thoughts
2:06 - GMMK Pro Teardown
3:08 - C3 Equals Stabilizer Holee Mod
4:05 - Sticky Stock Stabilizer Dampeners
4:18 - KBDFans Stabilizer Dampeners
4:25 - Stabilizers Installation
4:44 - GMMK Pro Gaskets Upgrade using D65 Gaskets
5:29 - GMMK Pro Polycarbonate Plate Modifications
6:34 - Re-assembly
7:51 - Glorious Panda Switch Lubed and Installation
8:22 - Mars Colony Keycaps Installation
8:39 - Tokeys Wooden Artisan Keycaps
8:45 - GMMK Pro 3D Printed Knob
8:51 - Kables Custom Coiled Cable
9:02 - Finished Build
9:13 - GMMK Pro Sound Test
14:43 - Conclusion
LATEST VIDEO 👉 bit.ly/SZ-Latest-Video
SUBSCRIBE TO OUR CHANNEL 👉 bit.ly/Sub2TechBroll
SUBSCRIBE TO OUR PINOY CHANNEL 👉bit.ly/Sub2PinoyTechBroll
PLEASE SUPPORT MY CHANNEL by Using the Links Below 👇
When buying on Lazada: c.lazada.com.ph/t/c.8YF
GMMK Pro Upgrades and Modifications Guide - GMMK Pro D65 Gasket Mod - GMMK Pro Flex Build - GMMK Pro Review
So Last week, I shared with you my unboxing and stock build of the GMMK Pro 75% Mechanical Keyboard and I also shared with you all the upgrades and modifications that I plan to do, so in this video, I'll share with you exactly how I executed those upgrades so that you can have an idea how to drastically improve both the typing experience and sound quality of the GMMK Pro. This build in particular focuses on improving the typing feel by upgrading the stabilizers, modifying the gaskets, and essentially make a GMMK Pro-Flex Build. I'll make this as concise as possible
#gmmk #gmmkpro #gmmkproflexbuild
My Gears:
Camera: buy.shopzadaph.com/Sonya6400
Lav Mic: buy.shopzadaph.com/Boya-BYM1
Audio Recorder: buy.shopzadaph.com/ZoomH1n
Microphone: buy.shopzadaph.com/BM800withM...
Fluid Monopod: buy.shopzadaph.com/Yunteng288
Tripod: buy.shopzadaph.com/BenroA150
About TechBroll
TechBroll came from the root words "Tech" and "Broll". B-roll means supplementary content that helps deliver a story better, and that's what I love the most about my content, creative b-rolls. Another meaning of "Broll" came from the Urban Dictionary which means the guy who always got your back online.
Website: www.techbroll.com
Facebook: / techbroll
Instagram: / tech.broll
Twitter: / techbroll
KZbin: / techbroll
Disclaimer: If you buy through my affiliate links I will get a small amount of commission which will help support my channel without additional cost to you. Thank you!

[@TechBroll]

🛒 BUY IT AT SHOPEE 👉 GMMK Pro: shp.ee/axhhajg Glorious Panda Switches: shp.ee/g32a48y Polycarbonate Plate: shp.ee/vca69s4 Glorious Coiled Cable: shp.ee/3egf56e Glorious Panda Toy: shp.ee/qur473q Glorious Keyboard Case: shp.ee/ixziuus GMMK Pro Knob: shp.ee/z9euyke Durock L7: shp.ee/sriwiae 🛒 BUY IT AT LAZADA 👉 GMMK Pro: bit.ly/3xFKldk Glorious Panda Switches: bit.ly/3iXlspB Polycarbonate Plate: bit.ly/3xDPhPX Glorious Coiled Cable: bit.ly/3qf0kN2 Glorious Panda Toy: bit.ly/3vMTL5F Glorious Keyboard Case: bit.ly/3cZuOx6 GMMK Pro Knob: bit.ly/3zT8z67 Durock L7: bit.ly/3xYM4LL Mars Colony Keycaps: bit.ly/3espjX3 Time Stamps: 0:00 - Intro 1:04 - Initial Thoughts 2:06 - GMMK Pro Teardown 3:08 - C3 Equals Stabilizer Holee Mod 4:05 - Sticky Stock Stabilizer Dampeners 4:18 - KBDFans Stabilizer Dampeners 4:25 - Stabilizers Installation 4:44 - GMMK Pro Gaskets Upgrade using D65 Gaskets 5:29 - GMMK Pro Polycarbonate Plate Modifications 6:34 - Re-assembly 7:51 - Glorious Panda Switch Lubed and Installation 8:22 - Mars Colony Keycaps Installation 8:39 - Tokeys Wooden Artisan Keycaps 8:45 - GMMK Pro 3D Printed Knob 8:51 - Kables Custom Coiled Cable 9:02 - Finished Build 9:13 - GMMK Pro Sound Test 14:43 - Conclusion

[@i_am_acai]

your keycap link is broken

[@Mikrowave]

i cant buy it because i am from malaysia so i cant buy it

[@thenkey4824]

@@Mikrowave Look at the original Glorious store

[@brenthughldridge546]

Just bought my first gmmk pro 2 weeks ago and i have yet to tinker with it. This video is so timely. Thank you.

[@cadenplays7693]

Ima have to watch this twice. You covered so much information, without it being a 30 minute video

[@jajachurch]

Stabs are pretty mushy but the rest of the board sounds phenomenal. Love the keycap set as well!

[@XDTheLaughingManXD]

this has been my favorite board so far in a long time. not because it's the best board money can buy or anything, but because it brings me that joy of REALLY customizing your keyboard to get it just right.

[@snapdag]

same my dude, this board is dope. i've had an absolute blast modding this thing to get it just right for my tastes. this keyboard scratched my itch and then some as far as getting the 'full custom' experience goes, all without having to break the bank. the only fair criticism this board deserves is that it is most certainly sub-par if you plan on keeping it 100% stock. like honestly idk wtf they were thinking with the amount of lube that comes on them damn stabs fresh out the box lol.

[@kiwizor9962]

@@snapdag its horrible, monsgeek m1 is WAY cheaper, 99$, way better stock stabs and better sound etc literally gmmk is horrible especially for its price tag

[@harrisonbell6964]

Awesome video, I'm looking into building my first custom keyboard and the whole space has been a little daunting. I really love the 75% layout and the dial on the gmmk pro but was a little concerned with some people in the community really griping on the short comings of this keyboard. Honestly your build has shown me how great I could get those stabilizers sounding with a little time put in. Definitely buying the keyboard kit after seeing this. Thank you and keep up the great work :)

[@_BlueCollarGamer]

FANTASTIC, The build is AMAZING looking and sounding.. im not going to lie, i am most impressed with the flex you managed to get out of the keyboard lol and i wil definitely be busy this weekend!! Thank you for putting out this great video.

[@louisgendron1319]

I've cut the 4 inner screw mounting point on my PC plate today and I finally have some decent flex. I haven't use the standoff screw and only used the light diffuser screw. Good flex toward the center, a bit stiffer on the outside, might have to try cutting all of the screw mounting point. Awesome guide, awesome tips.

[@cruellghoull7602]

Killed it fantastic video! Loving the sound of this board now! Feels great too!

[@SupraSayianOfficial]

Great mods man! Definitely learned a lot, I’m gonna try out the gasket mod you did.

[@Maitreya3001]

I've saved this video for later. I've watched soooo many GMMK videos, this is by far the best modding video, includes everything. I'm waiting on information about the Keychron Q1, if that doesn't turn out to be what it suggests, I'll get the GMMK and follow your guide. Thanks a lot anyway! Glorious should put a link to this video in their manual.

[@amok8938]

Just did mine witg tape mod, pe foam mod, durock v2 stabs lubed with 205g0 lube, removed the stock stab dampeners, switches are lube gateron yellows also with 205g. I had to sand down the aluminium plate for the stabs to fit cus i think i got an early version of it, either way the build turned out great. Really surprised at how good it sounded, ive heard a lot of sound tests on this board and im proud to say that i think mine also sounds absolutely awesome.

[@MJPOWERUP15]

Super cool build and great informative video! Also what is that numpad with the rotary knob built in called? I would love to buy one. Cheers

[@maskiez]

God damn, those keycaps are something else. Very unique!

[@princesslavacorn]

great video man, im just curious what lube did u use for the springs and where did you but the dampeners?

[@randyraditya]

Hi, great video! i'm trying to follow your mod, and find that when I tighten the screws to 50% (especally the top right one), the knob scratches the case when pressed. Did you experience this?

[@davieslm]

Fantastic video! I just dissasembled, modded, cleaned etc and reassembled mine yesterday and wish I saw you video first :) Everyone is right, those stock GOAT stabs are really overlubed and super sticky, PC plate is super tight with Durock V2s and I missed those stock stabilizers bandaids and had to remove the stabs again to remove them and clean with alchohol. I have just ordered an FR4 plate so wont need to use the screws and hoping fit will be alot better. Do you know if those self tapping screws will damage the diffusers if removed when I install an FR4 plate? Do the D65 foam gaskets make a big difference? I do not mind the stiff feeling but I was thinking about removing the two centre stand-offs. I removed the plate foam and kept the case foam but people seem to do the opposite. I removed the plate foam for accoustics and I am guessing you removed the bottom case foam for flex? Correct? I love your build and end result. I went for the classic all-black look with Boba U4T's and GMK WoB. P.S. I tried holy modding in the past with Durock V2s using the small thin parts of KBDfans stab stickers and they just caused my stabs to stick. Also spent ages last night doing the Epsi mod and had the same result on a two of my stabs. In the end I just removed them and traditionally lubbed them with Krytox 205g0 and balanced the wires. I am not sure sure what I am doing wrong. Maybe they are sticking out a tiny bit too much on the edges and rubbing against the outer plastic parts.

[@jasno_]

Love the keycaps!

[@pikachu725]

hi! great vid! been thinking about getting a gmmk for a while now and i've been very torn for a while. just wondering whats the numpad that you used in this vid ☺️

[@johncapulong1257]

saw your post in rigs gp and grabe sir ganda tignan kakaiba talaga at para sakin unique ung color na pinili mo sa peripherals ganda sir.

[@nicodoro3294]

Personal favourite is the modified stock build I love the thocks

[@xyriz5430]

Keep it up TechBroll, we need more Filipino techtubers!

[@forreigncarrot235]

Have you tried using TX stabs or c3 v3 on akko board? Tried using staebies but it wont fit on the plate

[@weilin9815]

Hey, do I have to use stabilizer dampeners? Can I just remove the old one and put the stabilizer onto PCS board directly?

[@eijirasenki]

Nice mod, sir! I have to be honest, like two from the commenters below, I would also like to ask what you numeric pad is. I would like to have one for my build as well.

[@catfoodbrad6726]

I used the exact same stabs as you (same colour too) personally didn't feel the need to mod them, just tune them and the stab dampeners are really not that bad just gotta clean them completely, tasty looking build man!

[@TechBroll]

I figured, I do all the mods at once so I don't have to re-disassemble it again and again. It worked out well in the end, it feels really nice now

[@catfoodbrad6726]

@@TechBroll thats great to hear, I don't blame you it is quite a long process 😅

[@lollol-mg9cr]

where to buy the additional gasket you used? my stock gasket inside the keyboard is deformed and will mod my GMMK once i have the time.

[@MisterMayhem17]

Looking good my guy!

[@umi6376]

Hello is this keyboard worth getting? I'm considering on buying the kit but heard the stabs have issues ? Please tell me what u think. Would durok v2 stabs fit with no issues since the boards are now released.

[@micaeladenisemorato6228]

Did you experience any pcb bowing while using the pc plate?

[@uytnguyen]

Nice mods! Quick question, did your pc plate fit right out of the box? I'm using durock stabs and mine was way too small and caused the pcb to flex so I sanded down the stab holes and it kinda fits but not perfect. My esc key is also not centered. I contacted support and they basically just offered me 40% discount on a new one. Even though I've heard several people have this issue.

[@davieslm]

Hi Uy. I just had the same issues. The PC plate was terrible to fit especially around the volume button area. Had to force it onto the Durock V2 stabs and kind of had to stretch the board. I just ordered an FR4 plate which should arrive in September. I did not like the idea that I had to use those self tapping screws and have concerns if it has damaged the diffusers (when I replace the plate). I will check out my Esc when I get home. I did not notice that.

[@zeyneyamohammed809]

That looks so clean, the glorious pandas, the keycap profile and color, it all matches so well. I don’t like the pink stabs, it’s aight. The rgb isn’t worth it, since rgb isn’t that clean either way, and the switches aren’t clear, so it’ll look very dark, and if I had the choice between dark but visible rgb or no rgb, I’d go with none. The side strip being set to that color looked so good tho, it’s the chef’s kiss. I love the aesthetic.

[@johnstephenreyes]

Elegant naman ng color. Para rin syang caramel 🍮

[@DabFiend710]

I'll have to do this eventually.

[@williammoningka8080]

Hey, been wanting to ask, is it worth it to upgrade to voice 65 from gmmk pro? Thanks

[@Guel_13]

sir marv tanong ko lang magagamit ba yung gmmk pro pag wala yung gasket foam na naka lagay sa gilid ??

[@fredflint9153]

Kamusta po yung pc plate nyo? Wala bang bow konte?

[@cloakNlp]

where can I buy the desk mat in this video?

[@skweeedy]

where can I buy that separate numberpad?

[@fo9989]

I suggest to try not using the stab dampeners.

[@nicodoro3294]

Seems super mushy on the space bar

[@Timothy9x]

Why? Is it because it can potentially absorb some of the lube?

[@Shakespeare4]

@@Timothy9x for me it makes it sound very muted and mushy, and well this is preference, I prefer not to have that sound and feel on my stabs.

[@lZAIDI]

Where could I find those keycaps

[@zekeviews]

ooof howd u got ur gmk lazurite mat early... still w8ing for mine =(

[@IM0SHPITI]

Omg the color scheme reminds me of eevee! Plz get a artesian eevee keycap for this I need to see it lol! Great mod though I had trouble with the stabs had to file down my durocks 😔

[@introbrilliantm7583]

the final choice kinda muted the spacebar imo. but yea, as long as it eliminates rattle, perhaps?

[@Zakuisbak]

final build for the stabs sounded way too mushy imo, but hey that could be your preference! also please balance your wires instead of just holee modding. Its a quick fix but better to just balance the wire and use something thicker lube like 205g2 or 206g0 or XHT BDZ or even permatex 22058(Dielectric grease) its gonna be better in the long run since 205g0 is just way too thin to even help with rattle. you can try out 205g0 again IF you actually balance the wires and stuff

[@isaacmacinas]

Wow grabe ang ganda hahaha

[@buiuctam1745]

Hey, pls talk to me how to buy keycaps same first your video ??

[@Wongtime4u]

What is that macropad?

[@jillting1852]

how much is the cost for building the durock L7 flex?

[@virus2339]

Wait, where can I get that desk mat?

[@kittykittygumdrops]

Excellent video! Keyboard still doesn't sound great after all those mods, though. I modded mine a bunch of ways, too, and can't get it to sound decent. Not even close to my Tiger 80 lite, Keychron Q5, Akko 5075B Plus, etc. I think the GMMK Pro is just doomed from the start.... what do you think?

[@crayanashraf516]

If you dont have a cutter for the pcb, use a serrated knife. Only took me 15 minutes, sweat, and some muscle to get it done lol

[@cloakNlp]

I cant open the link for the mars colony keycaps

[@johnstephenreyes]

Good Evening Kuya Marvs 🧡

[@colbytoh5528]

For the right shift key do u need something different bcuz for some reason the right shift looks tiny

[@clementpapa7126]

it is tiny though, but most keycaps set you buy have a 3 different size of any keys so that it is compatible to most all keyboard.

[@colbytoh5528]

@@clementpapa7126 yeah the original set i was gonna get didnt have the 1.75u shift key it had the normal one but i found a new one on amazon with the right size one

[@MP_7]

What is the numpad part?

[@cllntn]

Link for the keycaps no longer exists :(

[@bigpapichino1342]

Where can I get that numpad??

[@sepladastelinas5395]

hey does anyone know where you can buy an fr4 plate for gmmk pro in the ph? i really don't know where to look

[@Slumpgodcasper]

Google

[@brianock2321]

do you recomend cutting the standoffs on the plate ??

[@TechBroll]

Only if you want to have some sort of flex on the board. Otherwise, you can just leave it as is.

[@brianock2321]

@@TechBroll im just concerned about breaking my polycarb plate

[@ericiav]

@@brianock2321 ur not breaking anything whilst doing it, only concern u could have is that u can't install the screws in the screw holes but if u wish to have flex that isn't needed anways

[@brianock2321]

@@ericiav ok thx

[@misterlinh]

9:10 what number pad is that? it's wireless?

[@TechBroll]

The model name is Pabile P20, it's actually wired I just didn't want to include the wire on the shot. :D this is available locally here in the Philippines by the way.

[@misterlinh]

@@TechBroll ahhh dang, im located in the US. gonna see if i can grab one of those here :D

[@bradley9856]

where can I get those stabs?

[@TranquilMarmot]

I think they are C³ Equalz V3 Stabilizers. Easy to find in a few places by searching the web.

[@zDennii]

I realy think about a Build like this , I just got the old Gmmk but i dont realy know where to find other "good" switches or some Mod things in Germany/Europe. Dont want pay to much Shipping costs if it could invest in better things :/ But I just like the Gmmk pro much and its DE/Iso it makes life so easier.

[@amirtorhan2762]

9:10 Anyone knows which numpad this is?

[@nicholaslim8817]

my pc plate is bowing so much to the point my esc key is having interference against the top case!! any one facing the same problem and how to fix

[@unprofessionalreviews26]

Nice looking build. I'm new to all of this, do you know if I pick up this 75% board, is it standard? I mean will it be hard buying custom cap sets for it?

[@TechBroll]

It is standard in a sense that it is a normal 75% layout and there are a bunch of different sets specifically for 75% layout. But a standard base kit should be sufficient enough

[@zdwlees]

I've got an awful clicking sound on the right side of my space-bar stock. Any idea what may be the cause of this?

[@browniebrownie4416]

the wire is the problem, if you still need the help.

[@zdwlees]

@@browniebrownie4416 I put in some durock stabs worked a treat, thx for the advice though

[@sphon5905]

i kinda like the fist one ngl

[@Sankac126]

Where can i buy numpad sir?

[@Zensiv]

That’s the main thing I’m annoyed with my gmmk pro. Is the stabilizers. The space bar sounds terrible and much different than the rest of my keys. But tbh I’m afraid of taking the keyboard apart and fixing it

[@fazhirulabid4620]

the stock build already sound good af🙂

[@dontpickbeefwithme]

Nanalo kaba sa lotto kuya Marv?

[@dirx1996]

what is that cute little numpad?

[@bluesdude514]

What screwdriver is that?!?!?

[@katchou1337]

Funny, I just asked a question here, only to find that the question was answered in the video 10 seconds after submitting it 😅 so all I can do is say think for the video

[@ant2tinez]

🔥 🔥🔥

[@samcruz6454]

wtf nice!

[@StanleyAditya]

the AKKO steam engine is unrealllll, so gooooood

[@bonksti]

hell yes

[@raphyboii]

you should take out the stab dampeners, it sounds super mushy.

[@TechBroll]

It's actually not about the stab dampeners, I tried to remove it for testing but it wasn't the cause, it was the micropore mod. But like I said on the video, after using it for a while (break in period) it started to feel really good. Trust me, it feels really nice right now and I can not be happy enough with the result :)

[@Aloyius]

Hello from Vietnam, I would like to buy your product, can you help me to build a GMMK Pro keyboard? It's hard to find all of the accessories that needed to build a keyboard and the price is high too. Let me know if you do offer this service

[@louisramos5771]

good mod but the board wasn't definitely made for the mod cause the normal sound of the switches disappeared

[@dyesiboy]

boss san nakakabili ng numpad mo ?

[@jasno_]

The stock build was good enough .... till I heard the flex build...sheesh.

[@truthxbl]

Those stabs aren't ready for prime time friendo.

[@minhbu95]

Even the stock build with the GOAT stabs sounds so good. I don't know how you did that but the stock GOAT stabs sounds horrible from all other reviews and builds on KZbin.

[@TechBroll]

The stock build sounded decent to say the least, but it definitely has noticeable pinging especially with unlubed glorious panda switches. The GOAT stabs sounded decent as well but it doesn't feel good, it had a hard time bouncing back when I press it. All in all, after the modifications I did, this is currently one of my best sounding and feeling keyboard.

[@krisreddish3066]

They did to me to outside the spacebar, and though the C3 stabs seemed fixed it, I am not sure it was stabs causing that. It may just be something about the case. All GMMK Pros have a super high pitch ping on the spacebar to me. Even sometimes with better stabs. I think the stab mods muted the ping so it is harder to hear.

[@symz81]

Its night and day

[@conormcgregor7325]

Keycap dose't match the switches

[@sidesw1pe]

Got a GMMK Pro today and found that the stabilizers are sticky. It is unusable in this state. Un-fucking-believable for such an expensive kb... So, looking around to see how to get into it and resolve this 1st world problem I shouldn't be having.

[@johnpalcon7570]

Micropore aint it

[@tonchok9488]

I can't see how this is a flex build everything is budget products for a custom keyboard lmao

[@rawfilmwedding8300]

Stabs sounds terrible...

[@thor8334]

the stock build was better sounding imo

[@belphegor_tv]

I don't get why people remove the case foam in this keyboard. Makes it sound awful and hollow. And for what? Flex that you can barely feel unless you're really pushing down on the keyboard?