Go Faster Or Just Get Better Gear! Traxxas Power Up Program Velineon VXL-3S Install | RC Driver

[@walterbryan1798]

The paint job on the body screams the 80s. Love it!

[@GeddyRC]

Traxxas deserves IMMENSE recognition for this. Try to think of a single other company that gives you 50% (that’s major) an upgrade. Even Apple won’t hook you up with anything near that if you buy a laptop and it’s outdated the new month. I just bought my first Traxxas today, and I’m stoked to learn that the company is awesome like this. Very, very cool. I already love this hobby!

[@WildCaptures]

I wasn’t aware of the “Power Up” program, thanks for sharing 👍🏻

[@t.t.6398]

Been running this brushless setup in my TRX-4 Bronco for almost a year and I love it! I did use the smallest pinion gear on the brushless motor as well as swapping out the ring and pinion gears in both diffs. I swapped them to the Traxxas under drive gear set. This allows it to still crawl real slow like with the brushed motor but it's much smoother because you're gearing down the brushless motor. But in high gear it kicks ass! It'll yank the front tires off the ground at will! The nasty sloppy mud bogs that will stop the stock TRX-4 aren't much of a problem now!

[@shawnortmann9662]

Sounds like you created a real monster!!!👍🏻...

[@nothim1162]

Thank you so much for telling me about the power up program its gonna save me a lot of money

[@ohwell2790]

Just replaced the motor in my Big Foot as the brushes at night looked like a arc welder. But that is after over 2 years of running in the dry dirt in the desert of Arizona. If I go brush less think the 4 wheel drive Slash would be a good option for me But, the Big Foot stays.

[@ricklewis950]

Great information and also love the paint on big foot very classy

[@gregoryguza4623]

I highly recommend an RPM front bumper (available in black, blue, green and red) for that sweet truck. I know it may take away some of the scale looks-but the added protection it provides is worth it.

[@aaravvs]

Dude thx, I’m upgrading my Traxxas Grave digger to the vxl

[@Offical_KingCorgiGaming]

Yes

[@djsjoerd5786]

I never hurt over power up but is so good, thank you so match

[@joelopez633]

Thank you for the update on the power up program didn't know you could do that so cool THANK YOU GOOD VIDEO

[@simonthetrainguy]

I might do this after school one of these days

[@gadgetmantwincities]

Love that 79 ford body!

[@GeddyRC]

Jeez dude he’s not exactly Arnold Schwarzenegger but let’s not compare him to a truck!

[@DavidFernandez-sc5ws]

Power-Up Program? Genius. Traxxas for life.

[@gusthebus2542]

I've seen other company's do this first, it's good traxxas has these because their cars are quite pricey

[@sandersassen]

Absolutely love what you've done with the body, can you perhaps give some more details? Do you have a pictures or a video offering more detail perhaps?

[@thatotherboi8044]

I decided to upgrade my rustler brushed to the velenion system. A few days later I was road driving and the A arm on my left rear end broke. I wanted to get just a simple aluminum replacement. I ended up getting the entire thing in aluminum, changing to “TQI” remotes, an entirely new aftermarket non traxxas steering unit, new axles that are not traxxas, and a “ limited slip dif. I just finished I can not wait. Ps I also got some traxxas lipo batteries

[@stpbasss3773]

And just think for all that shit you bought you could have got a xmaxx lol I did the same thing with my slash it has over 1000$ in it easy.

[@joshbob9844]

This guy is a legend he does not edit he takes you throu step by step I don’t do any of the things he shows but it just helps to know so keep up the great work

[@joshbob9844]

I got I like I never expected that thanks

[@bkehlin]

Slipper clutch. That's funny. I always tightened those down until just before the nut stripped. I like posi-traction.

[@stevensepic.]

Does a tight slipper clutch break your driveshafts?

[@jakeventure]

I do the same thing. Every time I back it off even a little it slips and just plain drives like crap.

[@fabrizio78wolfgang94]

Hello! Really well done for the channel! Exceptional! Is it possible in your opinion to put the Bigfoot body on the Brushless 2WD Stampede without having to make changes such as (more importantly) do not pierce the body again and do not change the towers of the Stampede 2wd brushless? Tanks!!!

[@bluegroovemodelsports9650]

Great tips on assembly. Great purchase power tips

[@t_williamson]

I just went to my local hobby shop and they said that the motor and esc had to be in working condition and it would be 130.00 to do the power up program

[@Diament666]

Nice video, simple and well presented but as a Big Foot nr owner I happy with brushed motor but I can tell that the wheels have lack of good grip on real ground surface. Big Foot tires are too slick compering to Kyoahos Mad Van. Can you recommend any other tires that will have more grip and will fit Big Foot ?

[@markoftheus]

For offroad conditions, look at the 2.8 inch trenchers and badlands from proline. Some of the best offroad bashing tires out there, in my opinion.

[@slashraptor9317]

Well I didn't know about this till now I could get my xl5 to vxl

[@stpbasss3773]

Yeah plus probably another 80$ lol

[@David-pf6vo]

thanks for speeding through that and not giving angles where you could see what your'e doing.

[@stormshadow1211]

didnt know about the power up program thank you

[@huntingtonbeachsasquatch]

I would ask a Question! ...BUT, ....It looks like I would never get a response after seeing all the unanswered questions below.

[@topflight6028]

Yeah I noticed the same as well!

[@randyosborn411]

Now thats something i can get behind

[@dalepartoon710]

All your reviews and very good indeed but in the UK they are way to expensive and I could never buy them thanks anyway.

[@boomtownmdm6704]

Just get hobbywing. They are really good quality and so are their lipos

[@nielsjuhr594]

Good looking rig!

[@evanhexter5532]

I love your vids, but I personally wouldn't recommend Velineon ESC's. They overheat way too fast. Especially for your kids running in the grass with the Bigfoot. Good job on bringing an old build from a previous video series back! I also think that doing daily giveaways would increase your views, subs, likes, ad shares. As a result of that positive increase, your KZbin income will most likely too! As well as supportive sponsors.

[@gregoryguza4623]

EvHex RC-all ESCs and motors will heat up fast if you’re constantly running your truck in grass or anything else that creates a lot of resistance on your vehicles ability to roll easily. Did you try using the VXL ESC fan-that could help keep your ESC cooler? Also, if you’re swapping out the XL-5 system for the Velineon system-you should change the gearing as well. Try the stock gearing for the Stampede VXL for your Bigfoot-that’s what I did when I installed this system in my Skully along with swapping out the wheel bushings for ball bearings.

[@evanhexter5532]

Gregory Guza I'm aware of all of that. I'm not a newb to RC. Been doing this for years...

[@evanhexter5532]

Gregory Guza I appreciate you trying to help though! I'm sure that comment helped out some other people.

[@gregoryguza4623]

EvHex RC-that was my intention, to try to help anyone who’s not experienced in our hobby who might be upgrading to this system or is having problems. I also failed to mention for a newbie, the bronze bushings for the wheels should be (in my opinion) swapped out with ball bearings as soon as the truck is taken out of the box.

[@evanhexter5532]

Gregory Guza correct! Check out my other KZbin channel (EvHexRC1) for RC videos!!! Also, it's not that I'm not a fan of Velineon; Velineon is high quality! I use it myself, I just am kind of a castle fanatic. Btw I'm doing a giveaway on my other channel soon!

[@brianruse8051]

Thanks for the info great video

[@mikecollins6378]

Vxl 3s velineon systems are good you just can't overgear them 9-10t pinion 54 spur 2.8 tires 👍

[@GGrimm-Deadstone66]

I have a crazy idea of putting this set up in an old RC10B44.3, why? Because why not, lol

[@meknow2851]

I really need this

[@mick7739]

HI I HAVE DONE THIS UPGRADE 2 WEEKS AGO & NOW THE CAR IS UNUSABLE AS I CANNOT KEEP THE FRONT END DOWN? i have now wound up the front shocks to lower the front a little & now fitted a socket across the front bumper to ad weight i have yet to try this out i may have to stop using 3s & go back to 2s ? But it was insane on 3s :

[@hallbros305]

After the upgrade what was the speed of your rc?

[@JeffTremainer578]

Where did you get your monster truck wheels I got a slash 4 wheel drive and I need some big wheels

[@joshmiller7870]

Ebay or amazon. Search for stampede monster jam wheels.

[@goodwater2020]

Do I need new TQi transmitter to properly set up motor or is standard TQ ok to use? Thanks

[@markoftheus]

You can use the regular TQ system with the VXL brushless system. Make sure that you follow the included directions on how to calibrate the ESC, and you should be just fine

[@jackivan7632]

Velineon motor plus ESC is $300 here!

[@sureztv5836]

Can you recommend the metal servo saver for the Traxxas Original Bigfoot?, i already broke the servo saver twice

[@stpbasss3773]

Is Traxxas still doing this because I have two sets of the xl-5 brushed system with everything I would definitely trade it in and pay the difference for a velineon.

[@26zilence]

sk8tillyoudie 83 want to know that 2

[@WyattH]

Yes

[@603wolf5]

Now all you need is 3s lipo and say hello to the backflips

[@artadkins7624]

I have a Redcat Racing Ground Pounder & nobody that I have found makes aftermarket parts 4 bling points. What would you suggest I do 2 it so I get better performance out of it?AND will the truck run on 2 cell LIPO in its stock form? I do plan on putting RC4WD Demolisher Tires on the truck so I will need MORE POWER. 😎higherpower

[@Mftv12]

Can you trade in multiple things to 1 thing or a new car

[@mat6916]

as always, good!

[@gwrlimeboy3763]

Can you make a video bow to make the rc monster truck 4 wheel drive

[@obsnation8453]

I did this to my truck and I run on 3s I have never been able to take it full throttle because it just wheelies as long as I’m on it. Do you have any hearing suggestions I’m currently running the original gears from the titan 12 turn and I think it’s too low

[@TortugaBruv]

Try a 2s lipo or buy a wheelie bar and adjust it so it won’t wheelie as much

[@thareal.01]

Put some weight on the front

[@markoftheus]

Loosen your slipper clutch a little bit.

[@ConditionZero76]

Hello if anyone with knowledge in the game can help me out I really appreciate it.. , Im new to electric RC trucks. I use to run Nitro but its been 10 years or more.. I recently purchased a new 1/10 scale traxxas slash w/ the XL5 /12 t basic motor. Im not even sure what factory pinion /spur gear comes in this basic truck but I just bought the upgraded Traxxas Velineon Brushless Motor & ESC VXL-3s OBA 3500 kit. should I just swap it out with whatever factory spur/pinion gears are in the basic truck or should I switch out the pinion or spur gear (I have NO clue) & does it matter which gear is swapped out (pinion or spur ?? ) I would prefer the best of both worlds good torque when I punch it & good overall speed, Im not necessarily looking for all torque or all top end kinda the best of both ?? any help would be great.. Thank you side note. what's better the Traxxas Velineon Brushless Motor & ESC VXL-3s OBA Waterproof 3500 or Castle Creations Sidewinder SW4 Waterproof 1/10 ESC/Motor Combo w/1406 (4600kV)? Again Thanks

[@erikm2003]

I have both the castle and velineon. I’ve had the castle for a year and a half and have had no issues. I’ve had the velineon for a month with out any issues. The velineon is $170 and the castle is $110.00 there doesn’t seem to be a big difference in perfect to spend the extra $60 for the velineon. Both have torque and are fast. I haven’t raced the two side by side but I think the velineon might be 1-3 mph faster. Their both in slash 2wd same gearing. Both of them it’s hard to get it full throttle on 3s because they flip Over backwards. You can be at 3/4 throttle and punch it and they’ll still go over backwards. Their both power houses. Which ever one you get you’ll be happy with it. Hope this helps. And questions just ask.

[@modelrc9500]

I want to do this but adjusting the slipper clutch so it’s how it was when it came seems to hard

[@markoftheus]

If you don't remember where your slipper was set, here's what you can do: 1) Tighten the slipper nut all the way down until you feel it come to a stop. 2) Loosen the slipper nut 1 full turn (this will give you a good starting point that traxxas recommends). 3) Go drive your vehicle and readjust the slipper as needed.

[@johna3083]

i just got the big foot oem model truck does traxxas make a light kit for it ? thanks

[@roynorthcutt830]

Sweet man ive got the rustler vxl and it is a beast good to know on there trade in program

[@morganhay859]

I know I’m late but can’t you also get a castle system through the power up program.

[@ronniewalker4175]

The Rc Maniac yeah, the mamba monster

[@Oliver_stick]

What’s better. The velineon motor or the castle creations sidewinder sct 1410 motor.

[@TortugaBruv]

The Big Bad O castle creations

[@hayypapi4281]

Where you got the kit love it

[@michaelross5674]

Hey bro. I have a redcat blackout im looking for aluminum upgrades .. Redcat doesn't have alot for blackout do other 1/10 parts fit on the blackout... Redcat wont even give measurements or anything... Need help

[@simonthetrainguy]

I’m getting one after my yard sale

[@wtfdudekk]

protrac that stampede man! or just wide mod it, just plz do it. i cant stand seeing different offsets on stampede/rustler

[@medikate8277]

awesome. thanks

[@demarcoscott3998]

Should I change the drive shaft on the stampede 2wd I have?

[@markoftheus]

Not necessarily. If your driveshafts are holding up to your driving, just keep using them. I've got a Castle brushless system in my 2WD Rustler and I still run plastic driveshafts with no issue. I use the slipper clutch to my advantage because I run on loose, low-traction dirt

[@cscott_lc1480]

what the best battery for the bigfoot I just got the truck and want to have better run time

[@markoftheus]

2S LiPo with a capacity of 5000mAh or greater.

[@99ville]

Does arrma have any thing like this?

[@dashit5925]

Hola si es del mismo tamaño el velineon que el 12t

[@aidanhammond2390]

That's Bigfoot #1 repainted

[@jasonlittle7789]

Hello I'm just getting into these electric rc's and bought the vxl recently. Where did you find that body at ? Can you provide a link please.

[@MrTrimble2010]

Jason Little thats the factory big foot body

[@xKINGRAVEN87]

Ok so the VXL system is 170 but on the form it says i can get the vxl for 150 after trading in my xl5 system how is 150 50% off 170? i'm really confused

[@teammoneymikerccarsandtruc3472]

What's the amp rating on those escs?

[@tashunpikovsky2150]

Would any of these products work for a traxxas ford raptor and would more powerful batteries like the 5 series 5000nimh

[@connorswalsh]

Tashun Pikovsky you usually upgrade to lipo batteries along with this upgrade, as well as the gearing. You will get more power out of a lipo battery first and foremost, then there is more power from the motor.

[@aidanrocha9488]

is that a lipo only moter

[@TortugaBruv]

They also take Nimh packs

[@northsideryders9504]

What's a better faster system then the vxl system I have vxl system now on 3s and different gearing it's ok but I'm looking for more

[@tombo3425]

northsideryders of you can afford it, get the castle creations 3800kv combo.

[@stpbasss3773]

Hobbywing or castle definitely the two Best

[@isaaclyonsf1]

The trade thing doesn't work for the UK I don't think.

[@nsvaluto48328]

Hi Greg, i have a curious question can Traxxas velineon vxl motor with say a Dynamite esc?

[@TortugaBruv]

No dynamite is a different brand

[@hayypapi4281]

Where to buy brushless motor ?

[@jasonpersaud5259]

Lol I'm definitely not getting this is system cause more than my truck I paid 139 for my truck N that cost around 140 I would rather by another car its still a great item do u know any thing $100 or less esc and brushless motor that splash proof

[@brendanslavik1449]

Look at castle creations they have a few on amazon for less than $100

[@stpbasss3773]

Gool RC if your on a budget you can get a brushless set up ESC and all for 40 to 60$ and they are decent then you can get a better ESC later.

[@rcgarage3377]

Where did you get that body

[@LEDniac]

Blue Locktite on the screws will save loose screw disasters......

[@stpbasss3773]

Yeah an RC expert who has been in the game forever really needed that Captain obvious and FYI it's a traxxas most of it screws into plastic so loctite does nothing

[@hotdogvr879]

Great

[@isaaclyonsf1]

Over here that upgrade kit cost as much as my Traxxas skully! The truck cost £215, and the velineon kit costs £200 RIP.

[@isaaclyonsf1]

RC Doge, that's in the US, in the UK there is also tax, shipping and more markup, this makes them way too expensive.

[@isaaclyonsf1]

RC Doge, oh, UK is just too expensive.

[@PYROxSYCO]

Maybe you should open a PO Box in France. XD

[@isaaclyonsf1]

PYROxSYCO, lol

[@vichoscsae1654]

it is better the stampede vxl is cheaper the price

[@charlesspidell1447]

Hobbywing

[@marianoblanco2981]

Where you get that body

[@daveg5420]

Custom painted traxxas bigfoot classic body

[@davesrcrepairshop9606]

eBay

[@marcolitle8000]

Pizzapizza

[@dustinsalisbury4383]

1 question, if I was to do this power up program and get the system you have here. Can I still run non lipo batteries? I don't currently use lipo's.

[@BagTagMike]

Dustin Salisbury yes you can still use your NIMH batteries.

[@dustinsalisbury4383]

BagTagmike1 thanks. Planning to switch to lipo eventually.

[@sinist3r723]

or couldn't someone just buy a Stampede VXL for $80 more and have the Velineon set up, plus the TSM radio etc, and then just put a Big Foot body on?

[@Mftv12]

Can you trade trucks

[@lk_dslr1951]

If onily i knew this 1 year agao

[@Mftv12]

Can you trade in parts

[@Kevin-666]

this guy looks like old john cema

[@josephwilsonjr5166]

This isn't fair bro 😡 nly USA customers can.why ?

[@bobbyweiand3446]

👍👍

[@horsecheergirls9328]

Dus it only work on 2x2

[@ashtonread9741]

Horsecheer Girls 2x2 means it only has 2 wheels. You mean 2wd. Also, no it also works on 4x4 and 6x6 and so forth.

[@pyrovideos7467]

Horsecheer Girls does

[@kevgad6649]

Horsecheer Girls no

[@johncrafton8319]

Maybe next time mount the camera in a different position so your hands aren't blocking your work.

[@xKINGRAVEN87]

They still do this program?

[@markoftheus]

Yes. I did it with my radio system about a year ago.

[@LexDiamondz-jd7vk]

You shouldn’t drive in grass because it strains the motor and kills your servo for steering

[@BigJoePerron]

Don’t try doing it if you live outside of America because the shipping will cost more

[@newamericatowguy3633]

Dont do the power up system .... they say 50% but that's a lie... I talked to my local hobby shop about it and they showed me the numbers on it so I went hobbywing.... more power for less

[@Trotter13]

Please, please, please, please don't do the power up for the motor and esc. You have options like the Hobbywing Max 10 with actual programming options, more power and it even costs less. You can also do the same with the Castle SCT system. In addition to that the motors come in several KV ratings to accommodate your driving style. The promotion of that VXL upgrade is negligent. I'm disappointed ...

[@appleslider999]

🤩🤩👍👍🥳🥳🇹🇭🇹🇭

[@bradbozarth1822]

Isn’t that the Incorrect Gearing for The Velineon motor?

[@markoftheus]

It depends on your setup, along with your driving style and conditions.

[@hallbros305]

​@@markoftheusAfter the upgrade what speed should I expect with factory gearing

[@markoftheus]

@@hallbros305 I've got a Castle 3800kv 1410 motor in my rustler with factory gearing (16/90) and a 2s LiPo. If I had to take a guess at my speed, it's probably around 30 mph. It's definitely faster than the stock brushed system but what's most noticeable is the truck pulls to top speed quicker.

[@simonthetrainguy]

I need my car to go faster

[@ironreed2654]

So not to be that guy...But why is he not doing this with his son?

[@barder194]

RICHARD!

[@chrisdavis1151]

If you want fast just buy a NITRO TRUCK!!!