Go Kart 150 Snow Plow

TrailMaster 150 XRX Snow Plow / Blade Project Version 1.0 with studded wheels. Pushing snow in winter.
Would be the same with some other brands like, Ace Maxxam 150, Carter Brothers Talon 150, Hammerhead 150, as they are similar machine, the result would be the same.
Facebook: / maximumparts
Instagram: / maximumparts
Go Karts Parts Canada: cad-gokart.maximum.parts/
Go Karts Parts US Price: gokart.maximum.parts/

[@baconking9648]

Thats flippin cool!

[@c-martz2846]

maybe if that plow swiveled, it can go farther. pushing snow is a task even for v8's

[@maximumparts]

The plow swivel but for the test it was better straight. But you are right, the plow in angle work better and you can go farther. With the snow track it work even better kzbin.info/www/bejne/bX7LgWqXeMh_iLM

[@optic7692]

Tutorial on how to build?

[@maximumparts]

@Short Optic I never did a tutorial on building it. I can say, it takes time to figure out. I found the tracks, adapted them to the axle. Spin a brand new axle on a metal lathe to match the track. The skis are from a junk yard, ask the guy there for basic skis as long as they have metal on them so I can weld the setup to make it work with the front wheel hub. The last major thing was to switch both sprocket from 14 - 39 to 17 - 22 by memory. That was a headache as the wheels were bigger than the sprocket wheel that move the track. I would have put different sprocket but I was limited by the place, the output sprocket from the engine almost hit the chain tensioner, on the axle, I wasn't able to put smaller because it hit the mount for the sprocket. I also change the CVT for heavier rollers. Conclusion, the machine go slow but have a lots of torque to move everything.

[@flowzay6286]

Where can I get a plow for my 110 cart

[@maximumparts]

The one I used is from a quad. I adapted it to my machine. Just make sure it connect under the seat or behind. If you take the one that connect in front, it will be harder on the front suspension.

[@brickingitup4261]

How high does the blade lift from the ground?

[@maximumparts]

About 16".

[@brickingitup4261]

@@maximumparts that will work! I’m building my own snowplow for a very Similar go cart

[@Yournothimbuddy]

Where did you mount it to under the Kart?

[@maximumparts]

There's a metal plate under, I hooked 4 U bolts to hold the plate to the frame. I welded a home made piano hinges on the plate and also the 3 arms for the blade. I just put a 1/2" rod across all holes to secure the blade and hook up the winch. Take about 2 minutes to install and remove.

[@mikevalazquez1459]

I'm gonna have to do this with my 250