Gobi Stealth Roof Rack Install (5th Gen Toyota 4runner)

Did our video help you? If so, consider buying us a beer: bit.ly/3feE6tJ
In this video, we show you how to install a Gobi Stealth Roof Rack on a 5th Generation Toyota 4runner. The video also covers installing a Gobi Ladder and Gobi Wind Deflector.
www.gobiracks.com/
*HELPFUL TOOLS*
If you're looking for other tools not used in this video, check out Timmy's Master Tool List.
www.amazon.com/shop/timmythet...
*Trim Removal Tool Set - (used to remove factor roof rail plastic covers)
amzn.to/2Gx7l6Z
*Stubby 3/8” Flex Head Ratchet - (it use to be available for sale separately but now we can only find it as part of this 4-piece set) amzn.to/39kQVit
*1/4" and 3/8" Flex Head Ratchet Set - (used both these ratchets for this job. These ratchets are super functional and will make your wrenching life much easier) amzn.to/2ql8nNA
*3/8” Drive Regular Extension Set
amzn.to/2OehCao
*1/4” Drive Regular Extension Set
amzn.to/2O9nl2x
*3/8" Drive 6 Point Metric Standard Socket Set - (used for factory roof rack bolts)
amzn.to/32WIh0M
*3/8” Drive 6 Point Standard SAE Socket Set - (used for Gobi fasteners)
amzn.to/2PPb575
*RTV Silicone Adhesive Sealant - (used as extra protection from water getting into headliner)
amzn.to/2TDca2v
*SAE Allen Head Sockets - (used for Gobi hardware)
amzn.to/2I1hQSH
*SAE Reversible Combination Ratcheting Wrench Set
amzn.to/38iqRzT
*Tape Measure - (used several times for needed measurements for install)
amzn.to/2PunqOU
*Painter’s Tape - (used several times for the install)
amzn.to/2PnQojx
*Microfiber Towels - (pick up at any hardware or auto parts store)
*Denatured Alcohol - (pick up at hardware store)
**As Ebay Partner Network members, we earn commissions from qualifying purchases.
**As Amazon Associates we earn from qualifying purchases.

[@johnsimeone428]

To echo every other commenter, thank you for the video, it’s been very helpful. I have a couple of comments and a question. First, it’s worth mentioning that for anyone with a 2019 or later TRD Pro, removing the factory rack can be a delicate operation. I ended up breaking at least one of the clips between the chassis and headliner when removing the OEM bolts. If the discussion boards I found after the fact are accurate, the Pro OEM racks are installed after arrival in the US, and Loctite Red is used. Fortunately the repair was not expensive, but it was definitely annoying. Proceed carefully, Pro owners. Second, for those who want to be extra cautious when lifting the Gobi rack into place, I suggest making use of the rack’s cardboard packaging. I set the rack on the cardboard, cut out some pieces to facilitate gripping the rack, and used a little bit of blue tape to secure it. I also put a couple towels on the roof. A friend and I lifted it overhead and set it into place without incident. We then carefully slid the cardboard out, dropping bolts into their holes as we went to prevent the rack from sliding as we removed the cardboard. The question I have concerns the ladder. With the hardware and brackets is a postcard-sized insert with an explicit instruction to use ant-seize on all fasteners. I noticed you didn’t do this when installing the ladder, and I’m curious why. I saw some of the other comment threads concerning stainless steel galling, so perhaps this explains Gobi’s instruction. Thanks again for the video.

[@TimmyTheToolman]

Thanks for sharing your experience with the install. Yeah, we didn't use the anti-seize but it wouldn't hurt. I just didn't see the necessity in it.

[@cody1niner3]

My Gobi just shipped... this video... is GOLD.

[@TimmyTheToolman]

Have fun with the install. Thanks for the comment.

[@mattmacdonald4106]

Just installed all this over the weekend, this video was so incredibly helpful. Thank you both for the details, information and clarity. Videos like this remind me that the Internet and KZbin doesn't have to devolve into a total cacuphony of vapid influencer crap. Well done fellas.

[@TimmyTheToolman]

Thanks Matt and you're right. Our channel is chock full of very practical content that can help save people a ton of money and frustration. We earn our subscribers and views the hard way. We're not two young hot girls who always find themselves in bikinis during their "Van Life" travels raking in views and subscribers from lonely single men. I'm happy to know our video helped you get your Gobi rack installed. Happy Wrenching!

[@FullMetalNapkin]

Hey I just wanted to say thanks for your video. I had played it over and over while installing mine and this video helped out a lot during my install. Keep up the good work and once again thank you

[@TimmyTheToolman]

Fred Simmons that’s awesome Fred. Thanks for your comment!

[@ineedmoore]

Watched your video once a week while waiting for my rack to come in. When it finally came it was extremely helpful to watch while installing. Thanks for the video and look forward to seeing your other installs.

[@TimmyTheToolman]

That's great to hear our video helped you with the install. You're very welcome and thanks for taking the time to comment.

[@DuskKarma]

Hey I just wanted to thank you guys for this video. It is by far the best and most complete I could find while installing my rack. I really didn't even need to look at Gobi's instructions with how you explained how everything went together. Super helpful so thanks!

[@TimmyTheToolman]

You're very welcome. Glad you found our video helpful for your install. Thanks for taking the time to comment.

[@austinshofner1614]

Im sitting on top of my roof rack drinking a beer as I am typing this comment. All i gotta says THANK YOU SO MUCH!!! This video made the installation a breeze. You were beyond accurate with your descriptions. I really enjoyed how you explained which socket wrench length or whatever was needed for each set of bolts. Saved me a hell of a lot of time in deciding what was the right size. Also your tip on not tightening the bolts down after the rack is placed on top of the 4 runner WAS HUGE. You provided a TON of little hacks such as using the tape as well. I am now a Timmy the Tool Man fanatic and will be looking for your videos when it comes to my next add on for my Toyota 4Runner. You are The Mann dude. Thanks, Austin Shofner

[@TimmyTheToolman]

It’s comments like these that make it all worth it Austin. Stoked you had an easier time with your instal due to this video. Sicmods dude!

[@FullMetalNapkin]

Thanks for your video man! my 16 week lead time started yesterday and now I'm watching all the videos of the rack I wont see til July lol

[@TimmyTheToolman]

Hey Fred, I think it's worth the wait. It is a really nice rack.

[@manuelbanuelos9033]

Solid video! I started off watching with my mind made up that i was going to hate tim. As the video progressed i was surprised to see that he stayed on task and wasn’t annoying at all. Very informative video without any excess lip flapping. 👍🏻👍🏻

[@TimmyTheToolman]

Well Manuel, glad you didn't find me annoying. Some have told me that I'm too long-winded but I'd rather give people too much information rather than not enough. Anyway, glad you like the video.

[@RCGJR_]

Update: i manage to purchase one from offroadalliance! They pulled some strings and shipped it freight here to Canada, now i’m so hyped! Will be playing this video once it gets here! ❤️💪

[@TimmyTheToolman]

Good to hear.

[@rommelrivera1186]

Thanks for the detailed video, guys. It was so good that I didn't even bother reading the Gobi instructions. The ladder is on tight and secure and there were no "extra" parts left in the end. LOL

[@TimmyTheToolman]

You're very welcome Rommel. Great to hear our video was detailed enough that you didn't even need to consult the written instructions from Gobi. Good job getting it done. Happy Wrenching!

[@johnkaper1129]

Your video is one of the clearest and best laid out DIY instruction demos that I have seen. Great job, if get a roof rack fo my 4Runner, I am going with Gobi. Thank you and thank you both for your service as fire fighters, Semper Fi

[@TimmyTheToolman]

Thanks John. We appreciate the nice compliment and we also appreciate your support for the fire service. Happy Wrenching!

[@ScottHecker]

This video is perfect. I just finished installing my rack a few hours ago and didn’t even need the instructions, which is awesome because they weren’t great. Thank you.

[@TimmyTheToolman]

Thanks for the compliment Scott. It's great to know our video helped you with your install.

[@gregm8871]

Hey Tim, another update: Got my kit yesterday morning and finally got it all installed today! No real hitches, other than one of the mounting brackets falling into the headliner that I managed to fish up and into place with some bailing wire, but all in all everything is done and looks good! Your video was most helpful, especially the ladder section as Gobis directions for that part suck. Thanks again!

[@TimmyTheToolman]

Good to hear you got it installed without too much difficulty. You're welcome and Happy Wrenching!

[@Pineywoodsrunner]

Thank you for the great instructions!!!. I'm a 51 yr old female and pretty much was able to do it all myself except the heavy lifting.

[@TimmyTheToolman]

You're very welcome Julie and thanks for the compliment. Great job getting done. Happy Wrenching!

[@YouTubeMaster1611]

Great video! Helped me tremendously. One omission in the video was that the factory rail covers have an end piece you snap loose before prying the cover off. This makes it a lot easier to get the covers off. That step is in Gobi’s instructions.

[@TimmyTheToolman]

Glad the video helped you out and thanks for sharing the tip about the rail covers.

[@cpmorris1001]

I want to say thanks. Very methodical and so well done! I give you guys two thumbs up on your communication

[@TimmyTheToolman]

Thanks for the comment Charlie. We really appreciate when people take the time to acknowledge our efforts to help you guys out!

[@ajgatto1225]

One of the best how-to videos I have seen. Great job! My rack gets delivered today. This video will help a lot.

[@TimmyTheToolman]

Thanks for the compliment AJ. Hope the install gos well for you.

[@ryanguess1785]

Great video, used this alongside the provided instructions and had everything installed w/o issue - thanks for making this!

[@TimmyTheToolman]

Glad you found the video helpful Ryan. Thanks for taking the time to comment.

[@Yobctube]

I just installed mine by following instructions. Very easy coue hour job. Just need help putting rack up top. It was a long wait but well worth it. My wife did not want it and now we can put what's needed to go on weekend jet ski trips.

[@TimmyTheToolman]

Well, good job getting it installed. We did the same thing and followed the instructions but made a video in the process.

[@desertgsrider1]

Hey, just wanted to say thank you very much for this video! I just finished installing the rack on my 2016 4runner and your video was EXTREMELY INFORMATIVE and helpful.

[@TimmyTheToolman]

You're very welcome. Glad our video helped you with the install. Thanks for taking the time to comment. We appreciate it!

[@paul.b.hasley.photography]

Mahalo nui loa for your excellent video and advice. Spot on and kept coming back to your video. Saved me a lot of delays and multiple adjustments (none!!). Many thanks!!

[@TimmyTheToolman]

Thanks Paul. Good to hear our video helped you with the install. You're very welcome!

[@malange42]

Fantastic, immensely-helpful video! Bless you all for doing this.

[@TimmyTheToolman]

Glad you found our video helpful. Thanks for taking the time to comment.

[@michaelsiener9085]

How perfect! Recently sent my deposit to Gobi to get my rack for my 5th Gen 4Runner, in the production schedule and I'll be installing it myself. Thanks SO much!!! :)

[@TimmyTheToolman]

You're welcome Mike. Just get a friend to help you when it's time to lift it onto your rig. Good luck with the install. You're very welcome and Happy Wrenching!

[@danasampson818]

Great video! Super detailed. I don’t even own a 4Runner, but I enjoyed watching you install the rack!

[@TimmyTheToolman]

Thanks Dana. We appreciate it!

[@kentgaisford6806]

Nice work. My Gobi arrives any day now....thanks for a well made instructional video.

[@TimmyTheToolman]

Thanks Kent and you're welcome. Good luck with the install.

[@goaheadskinit]

Nice work guys. Thank you for sharing.

[@TimmyTheToolman]

Thanks and you're welcome. We appreciate you taking the time to comment.

[@ralphpearson5420]

Just want to say thank you and that you are much appreciated. You have helped me in so many ways with my Tacoma restore.

[@TimmyTheToolman]

You’re very welcome Ralph.

[@v90cross2]

one of the best instructions!

[@TimmyTheToolman]

V90 Cross we greatly appreciate you taking the time to comment! Keep up the sicmods!

[@nunyabidnes5253]

Looks great! It’s been about 4 months since I ordered mine and I watch this video all the time so I can be prepared for when it finally gets here. Great job and information! Also, I love the color on that 4R.

[@TimmyTheToolman]

Hey Stephen, glad you like the video. Good look with the install when you finally get your rack delivered. I see nothing has changed with their production time. I still don't get why they don't improve on how fast they can get their racks out but I guess maybe they don't want to expand to a bigger facility and hire more fabricators.

[@nunyabidnes5253]

Timmy The Toolman my rack arrived this morning! So I am back, once again giving this video a rewatch. It’s going on tomorrow. Can’t wait.

[@TimmyTheToolman]

@@nunyabidnes5253 Cool. Good luck with the install. Let me know how it went for you.

[@nunyabidnes5253]

Timmy The Toolman just finished up! Looks great! The only issue we had was getting the front support bracket raised up a full 3 1/4”. We were pulling and prying. Absolutely could not get it to work. It’s at around 3”. Not sure if that’s just for looks, or for a better alignment of the fairing in the front? At the end of the day. It’s on and I am truly impressed by Gobi. Excellent craftsmanship, packaging, and directions. Quality product. Worth the money and the wait.

[@TimmyTheToolman]

@@nunyabidnes5253 I bet there's some small variances that happen from the production process. I imagine they use jigs to hold everything square but that's not a guarantee there won't be some slight differences between one rack and another. Glad you got it installed with little issue.

[@politesob]

Awesome job, love the Outro whisper "sickmods"

[@TimmyTheToolman]

Polite S.O.B. #SICMODS!!! The sickest of the sick 😷

[@ELIJAHSPRICE]

Hi, this was so helpful. I plan on ordering one for my 2007 Dodge Nitro. Im sure my steps will be a little different but its nice to know they have great instructions with there kit. Thanks for the video!!!

[@TimmyTheToolman]

You're welcome. Hope the install goes well for you.

[@michaelroback5883]

I wanna say thank you for your video. Great step to step explanation about the installation.

[@TimmyTheToolman]

You're very welcome Michael. Glad you like the video.

[@weitulong]

Great video. This gives me the confidence to do mine. Your video is really helpful and informative.

[@TimmyTheToolman]

Great to hear our video is inspiring you to do the install yourself. It's not really hard. It's mainly just time consuming. Good luck!

[@Bsim2020]

Nice detailed video. Just got mine the other day and was looking for a good install guide.

[@TimmyTheToolman]

Good luck with the install Ben. Get a friend to help you out and it will go smooth for you.

[@Yesitsqk]

Excellent video...thanks for the detailed install

[@TimmyTheToolman]

Thanks Matthew and you're welcome.

[@Donkeys_Dad_Adam]

Great Video. Really well done with a lot of details. Very good! Thank you!

[@TimmyTheToolman]

Thanks Adam. We're glad you like it.

[@richardsnation4609]

Really Appreciate your video. It really helped a lot. All your tips are insights were very helpful. Keep up the good work. Thanks!👍

[@TimmyTheToolman]

Glad you found the video helpful. Thanks for taking the time to comment. You're very welcome and Happy Wrenching!

[@matthewfox7000]

Solid video. Helped me a bunch with my install. Thanks

[@TimmyTheToolman]

You're very welcome Matt. Glad our video helped you out.

[@jefffrost5923]

Thank you! This video was incredibly helpful!

[@TimmyTheToolman]

You're welcome Jeff. Glad you found our video helpful.

[@bobomike23]

Thanks for the video - very helpful during my installation.

[@TimmyTheToolman]

You're welcome. Glad our video helped you out.

[@wademay6807]

Very nice install video. I added skateboard grip tape on the rungs of my Gobi ladder since it was pretty slippery. Don't want to be slipping off that thing a long way from anywhere.

[@TimmyTheToolman]

Glad you like the video and smart move with the grip tape.

[@H.pylori]

Very good instructional video. Based on this I believe that I can do this.

[@TimmyTheToolman]

Of course you can do it. Get a buddy or family member to help you because it's hard to muscle that rack up onto your roof yourself. The Gobi instructions are well-written but I reckon our video will make it that much easier to do since we offer more detail than the instructions provide.

[@sshanep]

Your video is exceptional. Gobi should be paying you.

[@TimmyTheToolman]

Thanks! You're right, Gobi should be paying us but knowing we're helping people out with installing their rack is payment enough. Happy Wrenching!

[@mobius012]

Just picked up a Gobi for our 2020 4runner Venture. Awesome video, thank you! We'll be installing tomorrow!

[@TimmyTheToolman]

Have fun & make sure to report back with your experience & anything you learned that we didn't cover in the video!

[@treypelham5515]

What color did you get? KDSS? I'm probably gonna get the Venture too!

[@mobius012]

@@treypelham5515 white, no kdss as I lifted it right after we bought it. Rides good but rides even better with an eibach pro lift. We bought and in the first 3 weeks did the gobi rack, Gobi ladder, eibach lift, 285 wildpeaks, trd intake, diode dynamics Pro fogs in yellow,, trd pro front end, raptor lights, custom exhaust with black chrome TRD tip, SSO rock sliders etc , had an arb awning but sold it as I have an ovs 180 awning in its way. It's a fun ride. Live in AZ and already been up to Colorado with it and did Ophir pass.

[@treypelham5515]

@@mobius012 damn dude that sounds awesome, I'm thinking about getting the KDSS and the Venture in Grey...I'll definitely look into the parts you listed.

[@user-te9nf8mm7t]

Prety clear explaination. Thanks!!

[@TimmyTheToolman]

Yep, that's our style, very clear and thorough instructions for people to follow. You're very welcome and Happy Wrenching!

[@jeffreylubin8682]

Great Video, now I just need my rack delivered (it's going on 6 months due to Covid). At least now I know how to install it when the rack finally arrives.

[@TimmyTheToolman]

Thanks Jeff. Good luck with the install when you finally get it.

[@arinmirzayan3949]

Hi Timmy. That's good you start filming 5gen 4runners modification too. I have 5gen also and I want build like my 3gen . thank u guy's for the awesome videos.

[@TimmyTheToolman]

Hey Arin, we will be doing more mods on 5th Gen 4runners. Part of the battle is knowing somebody who has one that's interested in modifying it. My buddy Garett plans on doing more mods to his 5th Gen and has the patience to let us film his projects. So, stay tuned. We're glad you like our videos.

[@arinmirzayan3949]

Great thank u.

[@shootersara]

I hauled a 10ft ladder in my 5th gen last week. After loading it through the rear window and having it in my face, I decided I should go ahead and get a rack. 😂

[@TimmyTheToolman]

You just made Gobi very happy. But, you'll really like their roof rack. It's a well thought out design and built sturdy.

[@zeem3633]

Nicely done guys!!!

[@TimmyTheToolman]

We're glad you think so. Thanks for taking the time to comment.

[@captainloutavizon2399]

Love this, thanks for the video.

[@TimmyTheToolman]

Glad you like it and you're very welcome.

[@seabass3192]

Thanks man, definitely sold me on getting this rack rather than the prinsu

[@TimmyTheToolman]

You're welcome. Gobi makes a nice roof rack. The only issue is the long wait to get one. I never understood why they don't step up their production so they can turn out more product. I guess they don't want to expand to a bigger facility with more employees.

[@gjm8220]

Excellent Video - Thanks

[@TimmyTheToolman]

Thanks and you're very welcome.

[@dylandavis1255]

Very informative and high quality video. Just installed my Gobi rack and this video was perfect. In my opinion, Gobi's written instructions seemed overly complicated, so Timmy's video definitely simplified the install. One thing - Gobi seems to have updated the lock nuts on the wind visor and they are no longer too tight.

[@TimmyTheToolman]

Thanks for the compliment Dylan. We appreciate it. It's good to get your opinion about the Gobi instructions. As instructions go, I thought Gobi's instructions were pretty damn good but it's great to hear our video simplified the install for you. It's also great to hear Gobi updated the lock nuts and I'd like to think our video had something to do with that. Thanks for taking the time to comment. Happy Wrenching!

[@AntonioClaudioMichael]

That roof rack is gorgeous

[@TimmyTheToolman]

Antonio Claudio Michael GOBI’s designs are definitely a nice fit for our 4Runners

[@AntonioClaudioMichael]

@@TimmyTheToolman definitely agree

[@gpaez24]

Great video, super helpful!

[@TimmyTheToolman]

Thanks! Glad you found our video helpful.

[@atch9790]

Nice work looks great

[@TimmyTheToolman]

Thanks. Glad you like it.

[@goga275bwb]

best video i have seen ol of such type. thanqs

[@TimmyTheToolman]

Thanks Sergi. We're glad you like it.

[@BroncoXLTRangeroverhaul]

Great job guys

[@TimmyTheToolman]

Thanks! We're glad you like the video.

[@suguride]

thanks for the vid, looking to grab a GOBI ladder.

[@TimmyTheToolman]

You're welcome.

[@bear74mar]

Thanks for this vid fallowed step by step thanks

[@TimmyTheToolman]

You're welcome Ronald. Glad our video helped you out.

[@LegendsBeware]

Great vid. Thank you

[@TimmyTheToolman]

Thanks and you're very welcome.

[@winganly3249]

excellent and through install vid. thx.

[@TimmyTheToolman]

Thanks for the compliment. You're very welcome!

[@bobscruggs8886]

Great Job Guys

[@TimmyTheToolman]

Thanks Bob.

[@josephweaver9674]

Great video!

[@TimmyTheToolman]

We're glad you like it Joe.

[@USTtraining]

Super helpful. Thanks!

[@TimmyTheToolman]

You're very welcome. We're glad you found our video helpful.

[@TimmyTheToolman]

Glad it was helpful! 😎🤙🏼

[@shiobanambriz540]

Think you sold me. Thanks for the video!

[@TimmyTheToolman]

Gobi will be happy. You're very welcome.

[@shiobanambriz540]

Timmy The Toolman I have been so indecisive about what rack I want to put on my 2018 SR5 4Runner. Now, that’s a different story. And I feel that both of did an exceptional job with the installation video so that I could get it done on my own.

[@TimmyTheToolman]

@@shiobanambriz540 Well, I recommend having somebody there to help you lift it up onto your roof unless you're really really strong. But, once it's up there, you can do the rest yourself no problem.

[@brandongoberdhan7742]

Really good video

[@TimmyTheToolman]

Hey thanks a lot Brandon Goberdhan. We appreciate you taking the time to comment.

[@CrustyAbsconder]

I would love to have that on my 2009 Sequoia.

[@TimmyTheToolman]

Maybe they make them for Sequoias. Check out their website.

[@mapexuser1234567]

Thank you for the great video. Just finished my install while watching. This was really helpful and the links are appreciated. I highly recommend the trim removal kit and for 15 bucks it's no-brainer.

[@TimmyTheToolman]

Great to hear you found our video helpful and you appreciate the links we provide in our video descriptions. Thanks for taking the time to comment. Happy Wrenching!

[@X5Overland]

Stainless Steel hardware likes galling up for no reason at all. Thats a bummer! Great video

[@TimmyTheToolman]

Yeah, I don't know why they don't change the hardware for that wind deflector. You shouldn't have to use antisieze to get fasteners together without breaking.

[@mechris4u]

Very helpful, thank you! Question: What is the netting on the back side window that holds the paper towels and tape @ 24:26?

[@TimmyTheToolman]

They call them Molle panels. Here's a video of Sean installing one on a 3rd Gen .kzbin.info/www/bejne/pHqyq3yeg5iIpZo

[@FRANKIEGBANGEMS]

I get my rack tomorrow been waiting 8 months for it. I also got the stealth large tool box.

[@TimmyTheToolman]

Have fun with the install.

[@margaretdrumsta9274]

Just did my install today watching this! Great step by step instructions! Quick question, how did you get the clear tape to lay flat when doing the wind deflector install? I haven’t done it yesterday but it doesn’t want to curve right across the front of the car? Just low and slow?

[@TimmyTheToolman]

I can't remember how we got it to lay flat. If it's not in the video, just do the best you can.

[@brandongilley4847]

Waiting on my rack - this video was amazing. Do y’all think it’s possible to install the ladder on the passenger side instead? I frequently carry a mountain bike on the back and am worried about where my handlebars sit and if they would interfere with the ladder

[@TimmyTheToolman]

I'm pretty sure you can mount the ladder on the opposite side. As long as there isn't something different on that side to prevent it from mounting flush to the hatch, it should work fine. Glad you like the video.

[@MountainStandardTime]

Did your dogs chew on your plastic cover after you launched it? LOL Great video. Thanks.

[@TimmyTheToolman]

The Australian Shepards didn't fetch it for us. Glad you like the video.

[@christopherpham4292]

I haven’t even received my 4r yet but I already know I want this Gobi rack! This video actually answered most of my questions and the install was fantastic. Thank you so much! One question tho - does anyone know if the Gobi decal on the wind deflector is removable?

[@TimmyTheToolman]

Hey Chris, have fun with your 5th Gen and good luck with the Gobi roof rack install when you get it. The Gobi logo is removable, it’s just a sticker.

[@dreddy_g]

Hi 3T! Was this the version with the sunroof cutout? (I have a sunroof on my T4R) And how has this held up so far? Thanks for the video!

[@TimmyTheToolman]

No sunroof on his rig so no sunroof cut-out on his Gobi rack. But, his rack has held up well and he likes it a lot. You're very welcome.

[@kentgaisford6806]

BTW - where'd you get that window cage / towel rack inside rear, driver side?

[@TimmyTheToolman]

Don't know, it's not our rig. I'll see if Garett can get on here and answer your question.

[@pan6479]

Hard to clean the snow maybe. But nice and detailed!

[@TimmyTheToolman]

That would be very true where you get snow.

[@kingbetong8741]

Did you got problem with the hatch alignment? Because mine does after a yr. i dont know if it’s because of the strut that i replace or because of the ladder, the passenger side of the hatch becomes higher compare to the drivers side

[@TimmyTheToolman]

Garrett hasn't reported any problems with his hatch. Maybe replace the other strut and see if that improves the alignment.

[@rumwomenandguns]

Did Gobi provide the clear tape you used for the wind deflector? I get my rack tomorrow.

[@TimmyTheToolman]

Yes, they did. Have fun with the install.

[@alexandriahill6962]

How long did the installation take? Thanks for the video!

[@TimmyTheToolman]

It's hard for us to give accurate times because filming increases the time it takes by a lot and some people work fast while others work slower. But, if I had to give you an approximate time for this job, afford yourself 3-4 hours and make sure you have someone to help you. You're very welcome and have fun with the install.

[@jamesadams3606]

had a question. picked up a gobi rack for my runner second hand, unfortunately didnt come with the deflector. could you possibly measure the length / height of the fairing for me :) will be building one but dont know the specific lengths they make thanks!!!

[@TimmyTheToolman]

Cofairingco.com would be a good place to go if you don’t want to contact GOBI directly for a replacement. You’ll need more that just the fairing though. You’ll also need the mounting brackets. Making the brackets yourself doesn’t seem hard. Just a bent piece of flat metal basically.

[@Anibalm28]

Great video!! but is it confortable to clean the roof of the car?

[@TimmyTheToolman]

This style of rack makes it pretty hard to clean the roof of your rig. It is one of the downsides. People have used Swiffer typs of cleaning pads and rods to get under the roof rack to clean the roof.

[@adamcarbajal693]

What did you use to clean around the holes before you put the silicone down?

[@TimmyTheToolman]

Denatured Alcohol.

[@TheDiesel_JLU]

Good video. But I want to see more of the Dodge in the garage!

[@TimmyTheToolman]

You and me both!

[@watchvidsalot4358]

Thank you for posting this video with such detail. That TRD PRO appears to have the stock ride height, is that correct? Also can you measure the overall height to the top of the rack? I would like to know if it will fit under a 7 foot high garage door. Keep up the great content!

[@TimmyTheToolman]

Garett's rig is stock height. I could ask him to measure it and get back to you. Glad you like the video. **Update - Garett got back to me and said it's around 6'3" tall.

[@jlest3036]

Gobi’s website says 77” for the stealth rack with factory tires. I’ve worried about the same issue with my garage and office garage but that leaves a full 8” for tires and lift so I think I’m about to pull the trigger on one.

[@s.garcia2733]

I put a 3” lift plus the gobi rack on top and it fits in my garage just fine with about 7-8” clearance

[@jands0903]

Very nice vid. I would like to see Gobi using metric hardware rather than SAE. To my knowledge all the bolts and allen heads on 4Runners use metric. Its more of a nitpick so 4Runner owners don't have to carry SAE tools in their truck tool kits.

[@TimmyTheToolman]

Yeah, I agree. Metric hardware would have been a nice touch.

[@lemaitrethemonk]

Have you had a problem with wind noise? Thank you.

[@TimmyTheToolman]

There's always going to be more wind noise when you add a roof rack. It comes with the territory.

[@ShakespeareCafe]

Can you turn the wind deflector around to hide the logo? If not I'll just use some black spray paint

[@TimmyTheToolman]

I don't know if you can put the wind deflector on the other way. Spray paint might be your answer.

[@andy.bernard]

Love this rack. My only gripe is why did they go with button hex for the bolts that connect the rack to the truck. Those things are so prone to stripping if they ever seize.... Such an oversight!

[@TimmyTheToolman]

I don't know why they chose that style of bolt. Maybe call or email them and share your opinion.

[@michaeltan4652]

Awesome vid!! Super helpful when watching and comparing against Gobi's instructions, I've watched countless times in preparation for my install this weekend. Hope more vids like this to come for the 5th gen 4runner! One question regarding the Wind Deflector install, any thoughts on why they have you put it on only to remove before applying the clear tape? It seems you could skip the initial install and put down the clear tape first using their "guidelines" and then proceed to install the wind fairing? I guess it makes for a more accurate placement of the tape, but it would seem with 2in of tape that there's a bit of room for error as to where the rubber on the bottom-side of the fairing would sit? If you had to do it over again, would you have just placed the clear tape down first or did you find that it was helpful to install the wind fairing first before removing and applying the tape?

[@TimmyTheToolman]

Glad you found the video helpful. Yeah, the wind deflector steps did seem a bit unnecessary but it does afford the most accurate placement of the clear tape. Maybe to speed up the install you could get the wind deflector up on the roof in roughly the position it will be in to eyeball where the tape would need to go, get the tape on and then install the deflector.

[@michaeltan4652]

@@TimmyTheToolman Appreciate the tip! Thank you for putting in the effort to reply to KZbin comments, prime example of how helpful the KZbin/off-roading community can be

[@TimmyTheToolman]

@@michaeltan4652 You're welcome. We try to answer all questions and acknowledge all comments on our channel. We're not such a big channel that we can't do this for our viewers. I know some of the bigger automotive channels with a million plus subscribers can't get back to everyone so a lot of questions go unanswered, which is unfortunate, but I imagine people understand that one person running a KZbin channel can't possibly answer every question that comes in on a daily basis. Good luck with your install.

[@10housevintage14]

Hey guys, I have a 2011 4runner, how do I choose a cargo roof rack that works with the sun roof?? Thank u!

[@TimmyTheToolman]

The Gobi works with roof racks. I'm sure other brands work as well. You just need to search and visit different manufacturer websites that make roof racks for 5th Gen 4runners and you'll be able to figure out which ones work. It's my guess most if not all will work because it's in the manufacturer's best interest to accommodate for models with sunroofs.

[@zachpeat5076]

Does this rack have the one with the front raised or is it the level one?

[@TimmyTheToolman]

Garett bought the Stealth Gobi Rack.

[@S3th02]

Any wind noise or wear issues since you’ve installed this?

[@TimmyTheToolman]

If you have a sun roof and you open it up, there will be additional wind noise. With the sunroof closed, you won't really hear much additional noise.

[@rafaelgonzalez4935]

Amigo soy de Puerto Rico y te digo que la mecánica toyota tacoma , 4runner son tu especialidad si yo tuviese el dinero para llevar mi toyota tacoma 2003 4×4 doble cabina donde ti lo aria

[@cabuzzi]

Great video. My only question (and I don't expect you to speak on the company's behalf) is why anti-seize over blue/yellow Loctite? Even the factory hardware had it (as it should). Even if you have to remove the rack at some point, blue Loctite is harmless, and would preclude having to tighten/retorque the bolts every few months. The bolts look galvanized, so seizure/bonding shouldn't be an issue.

[@TimmyTheToolman]

Glad you like the video. No clue why Gobi suggests anti-sieze. I agree that it doesn't make much sense. If you call them and find out, let us know what they said.

[@cabuzzi]

@@TimmyTheToolman I called and left a voicemail the same day you replied. No one returned my call.

[@willienillie6337]

Now, if you decide you don’t want it anymore, when removing will the adhesive tapes remove the paint from the car?

[@TimmyTheToolman]

No, just think of it as a sticker. Look up videos on how to remove wrap from a car and you’ll see it peaks off without affecting the paint…assuming you have a good paint job.

[@bundi3180]

Hello there I would love to meet you guys I have a 3rd gen 4Runner myself and would love to coordinate something with you if that is at all possible

[@TimmyTheToolman]

Sure, where do you live?