Godox X1T Control Guide with Custom Functions (Flashpoint R2 Flash Transmitter) (Pixapro ST III)

My entire kit of gear : kit.co/robhall...
Where I get Music and Effects: share.epidemics...
Follow me on Instagram: bit.ly/2sj7Lsq
X1T Trigger : bit.ly/GodoxX1T
If this looks familiar thats because it was a portion of the Godox and Fuji video. I wanted a dedicated upload for people looking for this instruction!
The Flashpoint x1-N is the ultimate radio transmitter for Nikon DSLRs that speaks to Flashpoint AD360ii, GodoxLi-on and Godox and Nikon Radio Remote without missing a beat and connects to all strobes with sync ports. The incredible range of these compact and lightweight units as well as their integrated functions and features make them the first choice of professional photographers. The proprietary TTL and HSS enabled 2.4GHz x1 Radio Remote System radio triggers transmits atop a Nikon body with the essential TTL pass-through and laser AF assist and works with the complete family of Flashpoint Speedlights, Monolights and Strobe lights with x1 TTL radio transceiver built right in.
All the x1 enabled family communicate seamlessly: the lithium powered Godox Li-on Nikon, Canon and Sony TTL speedlights, the Godox M alkaline energized speedlight, the fantastic AD360ii 360 Nikon and Canon TTL powerhouse, and the masterful 600ws AD600 monolights. Older Flashpoint flashes can be fired and controlled off camera while being attached to the x1 Radio Remote Receiver FPRRx1RN to grace remote link to earlier models.
The x1-N provides a full proprietary GR Group style interface allowing up to 5 Groups to be individually set to either TTL, Manual, or Off and most importantly, TTL and Manual Groups can be conveniently mixed together as needed.The battery powered units provide TTL, HSS (High Speed Sync) and even a HSS pre-sync timing adjustment for precision synchronization. PC cord sync input andoutput ports are provided for external device remote sync without automation. x1-N receivers are compatible with Nikon CLS system speedlights like the Nikon SB-910, SB-900, or SB700. Controlling the remote strobes is straightforward, with a large clear LCD panel interface aside 3 separate buttons relating to channel, groups and modes, while a thumb wheel provides fast scroll adjustment for the selected function. A simple switch located on the side of the transmitter allows the laser pattern Focus Assist Light to be switched on and off when needed.
x1T CUSTOM FUNCTIONS
The x1 Experience/Advantage
The x1 TTL Wireless Flash System is the advanced 2.4GHz radio remote that adds camera TTL dedicated custom functions to your multi flash experience. Easy to use buttons command a full range of functions like reliable channel triggering, group mode selectivity, HSS, all with powerful signal strength and exceptional stability to your selected camera flash language. LED panels clearly display the status of all remotely linked x1 compliant strobes so you always have control of group lighting mastery. x1 wireless communication gives speed of light response to on camera or off camera x1Family devices for a spectacular advantage on the shoot in any environment.
The proprietary TTL and HSS enabled 2.4GHz x1 Radio Remote System transmits atop a modern DSLR body with reliable TTL and pass-through to speedlights, plus laser AF assist.x1 transmitters work with the complete family of Flashpoint Godox Speedlights, AD600 Monolights and AD360ii Strobes with x1 TTL radio transceivers built right in. Add a x1 receiver to any legacy flash with a sync port and it too becomes part of the x1 Family! The incredible range of these compact and lightweight units as well as their integrated functions and features make them the first choice of professional photographers.
All the x1 Family enabled gear communicates seamlessly: the Lithium powered Godox Li-on Canon, Nikon and Sony TTL speedlights, the Godox AA alkaline powered speedlight, the fantastic AD360ii 360 Canon and Nikon TTL powerhouses, and the portable 600ws AD600 series monolights. Other strobes can be fired and controlled off camera while being attached to the x1 Radio Remote Receiver to remote link to earlier models.
All the x1 enabled units communicate seamlessly: the lithium powered Godox Li-on and AA powered Godox speedlights, the AD360ii 360 barebulb strobes, and the portable 600ws AD600 monolights - now all available in Nikon, Canon and Sony TTL as well as Manual models, with more proprietary camera versions on the way. Other strobes can be fired simultaneously by being attached to the x1 Radio Remote Receiver, and older R1 AD360ii and Godox Li-on units can be controlled and triggered using the bridge Receivers for Non-x1 AD360iis/Godox Li-ons.
One Remote to Rule Them All.
One Radio Remote System to Unify the Flash.
One Remote to Streak, Godox V860ii and AD600.
x1 Flash Imaging Freedom
Radio Active. TTL Auto. HSS Master..

[@finebrian2247]

Can you control the X1T-C in camera like with the yongnuo transmitters?

[@robhallphoto]

I'm unsure, i'm pinning your comment in the hopes that a Canon user that can answer it for you.

[@finebrian2247]

thanks

Yes you can, just go into the camera flash menu and make the settings.

[@jagannathan7787]

@@robhallphoto hi how could we set an id in XIT transmeter from canon 600ex-rt speedlight .

[@1EagleDave]

@@robhallphoto yes forsure

[@joebro937]

I was today years old when I learned that there was a manual for how to use this thing. And I learned what it can actually do. What a God send. Thank you for making this video

[@robbinsdrones]

5 years later - still a very helpful video, thank you! 📸

[@duncanfox8475]

Hi Robert, there is one power-on mode that you didn't cover. If you hold the test button down while you turn the trigger on, the status LED blinks twice and will allow you to control and trigger units very close to the transmitter. It puts it in a low-power mode that may reduce the maximum range of transmission, but removes the minimum range limitation.

[@amalitsky]

Does the setting persist once transmitter is turned off?

[@srizwan747]

THANK YOU SOOOO!!!! MUCH I cannot thank you enough for covering modeling light turn on/off that I have been wondering to figure out for so long.

[@AerialLensVideo]

VERY helpful - THANKS! I was completely confused (and pretty frustrated) until watching your video. Successfully got a TT685 and a TT600 to finally work as desired. Yay! The little manual with the trigger was not so clear (being nice about that). I am not real clear about getting HSS to work properly with those two triggered flashes, but this is a great start.

[@stelioskritikakis]

man you're a life saver... i had a strange behavior, when i turned on the x1t, my godox ad200 turned on the pilot-leds. after reseting the x1t, everything went back to normal

[@GoneDogging]

Thank you so much for this video. I spent hours trung to understand why the unit would not allow change of mode, would you believe. Your 'factory defaults' instruction restored both normality and sanity.

[@AerialLensVideo]

This is a Godsend - THANK YOU! I am amazed and that Godox does not include any sort of printed instructions for something so non-intuitive and complex. How on Earth did you figure all this out??? Thank you so much!

[@steelawesome716]

www.godox.com/EN/Download.html

[@AerialLensVideo]

Thank you. That link does not seem to work on Chrome, Firefox , or Safari. So, I will try again later.

[@andrewpolitano]

I mean, instructions DO come in the box when you purchase one as well..

[@steves8860]

@@andrewpolitano not mine. i got a used one!

[@thepixelpoet]

100% pure knowledge, No bullshit. Thank You.

[@fototyz]

This is the best review of the X1T I have watched.......... now I understand how to use it!! Brilliant! :)

[@ottoferdinands]

Thank you. Very clear video from one point to another.

[@vincentmediatv]

A bit late to get an ad200 but this is by far the most helpful video...thanks a lot Robert.

[@carlthegnarl]

Oh the little things! Didn't know about the "long press Gr button to modify all active groups at once" feature. Thanks man!

[@godsinbox]

Ive watched this 5 times and missed that feature, thanks for the tip!

[@manoharmgr8235]

வீடியோ மிகவும் பயனுள்ளதாக இருந்தது மிக்க நன்றி இரா.மனோகர் சென்னை . Very useful This video sir, , big thank you sir R.MANOHAR ,Chennai.India

[@timnguyen4494]

Thanls for the tutorial. My Flashpoint r2 receiver goes idle every time I leave it for awhile without shooting and it wouldnt flash flashlight so I have to run to it amd turn off and on all night. How do I stop this from idling?

[@stephansmokov4952]

Thanks a lçt! You helped me with custom fn 5 for using Godox QT600III at min power 1/256

[@thomasmosley9162]

Thank god for Robert Hall 🙏🏾LoL. I was having the hardest time with this trigger.

[@sherkhan-up2vc]

That is the content i wanted to watch. And to reach there i have watched like 20 more delusional videos. Thanks Budd

[@nairbyad7188]

just received my transmitter and two receivers which work perfectly with my SB-900's. thanks for the lesson as Godox's instructions should've been proofed by someone who has English as their first language!

[@jamesmills9651]

Thank you for making this video I've been waiting for somebody to do this for a long time

[@reinervenegas875]

Thank you so much! I have a few Contax and Yashica film cameras and lenses and been wanting to use flash for my film shots. The Fn 01 single pin mode was the answer, will be doing manual metering and this is such a great thing to know, I won't have to tether with a Sync Cord!

[@NerioAguirre]

Great video! And for it has been a good product. But I used it for no more than 10 sessions and from one day to another the AF assistant light stop working? I did nothing like firmware update, change AF sistem (I use One shot) or change functions 🤷🏻‍♂️. Any suggestions?

[@robhallphoto]

Multiple things need to occur for an AF beam to activate. It has to be AF-S / one shot (AF-C can’t possibly work with an AF-assist beam since the system never stops focusing.) AF beam needs to be set to on on the trigger (right next to device ON/OFF) AF assist / AF Illuminator needs to be on within the camera settings (the same option that controls any on-camera AF assist) Autofocus point needs to be in center mode, or on the center point / zone if you have it unlocked. The AF assist system is only designed for the center area. This limitation varies slightly camera to camera. Some are only when in center autofocus, others will activate in other modes, to varying degrees away from the center.

[@NerioAguirre]

@@robhallphoto thank you very much for your answer, I think all should be set as your describes, but I will double check all the settings as you mentioned, and I will let you know any progress. Again, thank you very much.

[@edwardnixon1782]

I'm using a gh5 with the x1t-o and/or the tt685-o. But I have 2 nikon compatible speedlights -- sb28, Metz -- and a Cactus first gen manual. I've given up on the idea of doing cross brand ttl from the 'o' devices but I hold out hope I might be able to do output controlled manual to either the sb or metz or cactus speedlights. So the question is: is there a receiver, presumably Godox, that will let me manage power level on these legacy flashes from my Godox devices. I'm happy to follow links or search down through comments if this is an old question. Your work on the Godox line in among the best, most articulate and professional I've found. Thanks for that.

[@ImaginetMedia]

Excellent information. Exactly what I was searching for.

[@derekmack]

Custom function 04 is for stroboscopic mode. The T is for time and H is for hertz. You might want 10 flashes (H) at 2 (T) per second. You might have a moving subject but also want a longer exposure, so 10 flashes in 2 seconds on a 2 second exposure. It's more for creativity than practical uses. You need a really low power output as well, full power would never recycle fast enough

[@hibhaven]

Thank you. Exactly the type of explanation I was looking for about the Godox X1TC

[@mrscillalatte]

This video is LIFE I needed this. Thanks for making it happen!

[@ayhancapan]

Instead of this trigger can i have a godox tt685s as a trigger? Will it work as efficient as this trigger. Thank you in advance...

[@beerbaron3003]

Good synopsis. What brand of X1 were you using? The Canon version is a bit different on the custom functions. C.Fn 04 is rear curtain sync, C.Fn 06 is three or five groups, and C.Fn 07 is flash beep on/off. You can also hold down 'mode' for 2 secs, to go into group mode, which allows you to mix TTL and manual groups. And hold down the test button while powering it on, will enable the trigger to fire the flash at close proximity.

[@robhallphoto]

+Andrew Parnell this was on a Fuji, although I'm fairly certain it's identical to Nikon.

[@PeterFootePhotographycom]

Thanks Andrew. I've been looking everywhere for the TTL plus manual groups info. You sir are a legend!

[@isidoracontreras486]

Andrew Parnell 408+ Khñjvkbfñ

[@michaelscoots]

Can you also adjust compensation in TTL mode?

[@MegaRay68]

My X1 sleeps and I have to press GR button to wake it up. Appreciate if you let me know how to keep it on all the time. Its really a pain to see it sleeping and the flashes don't fire.

[@kirtg1]

Thanks. Very helpful video

[@artmaltman]

I love most of Flashpoint / Godox gear but I always struggle with this trigger because the commands are so cryptic. I like it because when camera is high on a tripod I can view the screen unlike the newer model where the screen is at an angle. But man those commands ....

[@69_MK]

Mate, I needed this video. This transmitter got me confused AF.

[@careylee5951]

Thank you! This is exactly what I was looking for!

[@davidromischen4438]

Many thanks for the tour, congratulations on the clarity of the guide ... I would like to ask a question, and recently that I own X1 transmitter trigger for Nikon with its receiver! It works well I'm happy but I don't understand why if I attach a flash on the transmitter shoe X1, the flash attached to the transmitter does not work, the transmitter X1 triggers the flash attached to the receiver, but does not trigger the flash attached to the transmitter that is attached at Nikon, I don't understand where I'm wrong and ask for help to use the second flash attached to the X1 ... Thanks and sorry my bad English

[@crismonroe24]

this is a very helpful guide Robert, thanks for spending time to make this video tutorial. Keep it up bro

[@nairbyad7188]

holding thr grp button allows changing all groups' power together with the dial

[@James_m7]

Can you use the Godox X1T as a receiver for use with my Godox XPro transmitter? Thx!

[@robhallphoto]

nope

[@James_m7]

@@robhallphoto Thanks! I guess I'll have to get the Godox X1R

[@averymcdaniel423]

That's a lot of information.. I'm still trying to figure out how to change the light power from the trigger versus changing it manually.

[@LoboFrames]

THANKS! By default I couldn't use the scroll wheel to change groups. Now i can.

[@jagatpavasia]

I have godox sk400ii strobe light, it has power of increse or decrese at 1/10 stops, while my godox X1T-N control sk400ii by 1/3 stops. Have any idea to stops light by 1/10 stops ? Did godox X-pro works by 1/10 with my godox sk400ii ??

[@deehaggard3466]

I am having a problem with my trigger, I have 2 speedlites with 2 transmitters and a strobe, plus trigger on my camera, I’ve tried to control all speed lite & strobe settings from the trigger but hasn’t been successful so I’ve got to go to each light and dial in the settings I want, do you have a video on this?

[@MelbourneOldFashioned]

Thanks for this. I’m using the X1T-O and for some reason there is a half second delay between pressing the shutter button and the photo being taken. Maybe it’s something in the custom settings.

[@robhallphoto]

Definitely update firmware. Some users experienced this on the Sony A7R2 as well.

[@MelbourneOldFashioned]

Robert Hall Photography thanks Robert. I have a Mac so I can’t upgrade the Godox firmware. But I have just changed the flash on the camera to Fill Flash and the delay is all but gone. Just a fraction of a second delay now.

[@hholbe]

Great video!!! This helped out so much!

[@vasudevdesai1412]

Very helpful tutorial. I was searching for the second curtain sync function 👍👍👍

[@ssdigitalssuresh9697]

Sir solution please... I attached x 1 pro trigger on camera and flash on the top of trigger... If I click for photos flash not firing.. if I click test button in trigger flash working.. but click from camera flash not working... Option please.. flash is godox V860 ii.. trigger is godox x1pro

[@lauraquackenboss4193]

To trigger flash, do you need to transmitters? I am unable to get my flash communicating with one on the hot shoe of my camera. thanks!

[@ternielstvalle]

excellent tutorial

[@samueljames5167]

is there a way to control if high speed sync is on or off, or is that only available from the flash?

[@wilkbor]

Thanks for the video. I bought one of these and have spent some time reading the directions, which are not completely clear. A few questions that the manual does not explain: pressing and holding hte mode button for two seconds brings up a GR symbol. What is that for?

[@kmariamoro3014]

setting groups

[@MrZipjohn227]

i have nikon d4 and d4s body i want to use it with godox ad200 and ttl 600 units now my R2 ttl transmitter has been miss firing do i need to upgrade my R2 and or replace for newer transmitter. which one to upgrade to? thanks zip

[@zuid37]

One thing that's confused me about the Godox triggers since the Fuji update a couple of months ago - I can now use a Fuji controller for full remote-control over Nikon or Canon-system flashes, but will it also work with Canon and Nikon Godox receivers? Can I put an SB900 on an X1R-N and an X1T-F on my Fuji camera and have TTL, HSS, etc? Better yet, could I put a 600EX on an X1R-C and trigger it from a *Nikon* camera with an X1T-N attached? It's the universality of cross-compatibility that I can't seem to find an answer for anywhere.

[@robhallphoto]

I can't make a claim to all flashes, but I do know a lot of people have found the cross-brand compatibility to work with the receivers too. Not sure specifically for the models you mentioned but people are definitely doing this.

[@steveshepard9430]

Very informative. Thx!

[@ryanlucas861]

Thanks a bunch for this video. Really simple, and still helping people!

[@GoranSlika]

If I have two of these, each on a camera, can both cameras trigger the same speedlight?

[@robhallphoto]

Yes.

[@jaguarjj]

I have a hard time running the X1Tn and the YN622n together, although I did the custom function of a single pin mode, but every time I have to put the yn below, the x1t above it, then turn yn on first then turn camera on then turn the x1t on so all the flashes would work simultaneously for one shot only, then redo this whole process again, it's a pain in the butt, hope there's a way to make them work better than that

[@PhotoKenji]

I just received a news about the new Godox A1, it is a mini OCF for cellphones with 3 LED lights, which can be triggered by cellphone app, could you please do a review on this product?

[@PhotoKenji]

Amazing!! Thanks for this detailed instructions!!

[@AnkitSharma-pc5gp]

This was very helpful. Thanku

[@Patricia-qd6fb]

Hello Rob, Thank you for the instructional video. I have the channel, etc. all set, but for some reason, when I adjust the power from my strobe, it will not sync/communicate that adjustment with my Godox X1. It used to, but now no. I can only adjust from the Godox X1 and it communicates with my strobe. Can you help with this?

[@esskay4825]

thanks for the video Robert. I have purchased FlashPoint strobe without its transmitter (it went missing during the courier) FlashPoint things are not available in Asia but Godox ones are available. My two questions (1) Will this work in place of FlashPoint R2 X1T-N iTTL, which is what I had to receive as a pair? (2) Do i need to be careful about good transmitter available in TTL and iTTL models? If the detail helps, strobe model is 'FLASHPOINT XPLOR 600 HSS TTL' Thank you so much in advance

[@robhallphoto]

Yeah, Godox X1T-N is the same thing as R2 X1T-N TTL. No there's only one type for ttl, you just need to make sure it's the correct brand (N for Nikon, C for Canon, etc.)

[@SutibraDebasree]

in my X1TC there is 10 c.fn.. but u shared knowledge of only 8 of it... can u tell me what other 2 modes does?

[@suryachataut]

Can you put a Nikon flash on top of the remote and have TTL functionality for the Nikon flash?

[@robhallphoto]

Nope

[@Sky34158]

I have canon 80d and I will buy godox tt685c and x1 trigger but a lot of people says that tr685c is not working good in ttl mode with canon 80d and even the trigger x1 is not working cool with canon 80d so the problem of ttl mode of flash and trigger with canon 80d solved or still stuck please help me before I waste my dollars 💔

[@snemnguni]

Hi guys I'm still new in using triggers for Speedlights I want to know do I need a receiver for this kind of a trigger for a Sony A7 using a Godox TT685s Speedlight?

[@damza4557]

Hello Robert . I have a Canon 5dm2 and godox x1 with 24 software I cannot turn on 5 groups, only 3 are active, after setting in functions cfn 06 to 5 only 3 are active and there is no option, e.g. flash off, there is only 1 to 256 adjustment not present - when I enter holding mode into the Gr mode all groups are there I can also turn off the flash - BUT it doesn't work with Canon 5dm2. Is there any way out of this situation, except for replacing the camera? greetings Damian

[@Joan-ibz]

Hi I have v860ii for canon and I have sony a7ii The trigger x1t for sony it's compatible with my v860ii for Canon?

[@JohnnyTheCache]

The manual says "User friendly LCD", what a joke. In decades and hundreds of electronics products i have used, this is the most user-unfriendly product i have seen so far. Cryptic and just simply horrible. Thanks for the very necessary explanations.

[@rigoalcala3527]

Great tutorial, it's helped me with my DSLR Nikon's. I just purchased the Z 6 and can't get the auto focus illumination to work, I just shot an event in a very dark place and I could have used this option. any ideas or suggestions would be greatly appreciated. anybody else struggling with this? ( i own the flashpoint R2)

[@NemouseJurado]

Did you solve it? Im looking workarrounds

[@jatishpandav]

Can i use high sync speed (HSS) feature with godox 685ii *sony using godox nikon x1 trigger ? , My AD200 was broken now i have only godox 685ii *sony and sony/nikon x1 trigger. any possibility to use HSS mode, help me.

[@Emperor-2029]

i have Godox X-Pro flash trigger, X1R receiver, Canon 600EX-RT and Godox V860iic speedlites, camera is Canon 5D mark IV, i need to synchronize these all speedlites and flash triggers - receiver and transmitter. how i can do that?

[@robhallphoto]

put the X1R on the 600EX-RT.

[@Emperor-2029]

@@robhallphoto i did that, but then what to do?

[@ch-oy9fj]

Hi, I was wondering if the X1T would work with Elinchrom flashes? I just received some flashes and I'm looking for a good trigger. Just not sure they would work together. Thanks you for the great explanation in the video.

[@robhallphoto]

Godox X1-T only triggers Godox (and Godox rebrands) natively. Not anything else. You could connect an X1R receiver to the elinchroms sync port but you will not get remote control

[@cinematix6013]

Help me someone... Can i mount diff brand radio trigger on the upper mount on godox trigger? Will it work?

[@frnckjssld]

Hi Robert ! thanks for the tips, very useful. I'm just crazy about to put off the "standby mode". Is it possible ? It's turning off (or standby) if I don't touch it for few moment, very unconfortable.

[@DeletedDelusion]

Thank you, that is some great guide how to use that trigger.

[@puseletsomasemola282]

Awesome video. How do you set the "auto mode" so that the tt600 flash adjusts the zoom automatically

[@00DjChris00]

That is what I needed thanks man for the video. Couldn’t use a flash with multi function and now I can awesome but still don’t know how T and H works when I set t-1 and h-10 I suppose to have 10 flashes in 1 second but I have not , only t set to 5 make 5 flashes and set to 10 gives 10 flashes?

[@godsinbox]

maybe flash doesnt recycle its power fast enough to achieve the settings?

[@lordbilal2012]

thanks a life saver huge respect man

[@cathyb347]

I don t speak very well english but i have a question. I have look your vidéo and you Say : push 2 seconds on thé button to choose the chanel but I push but nothing change. What do I do ? I am just to buy it ? Please can you tell me if I do a bad manipulation ? Thank you

[@explorewithminroy8365]

My nikon x1 T is not connecting to ad200 pro but with godox v860iii it's connecting i checked all the settings on my ad200 as well as on x1 T trigger but still the godox ad200 is not connecting eith the x1 T trigger

[@robhallphoto]

@@explorewithminroy8365 probably ID function.

[@explorewithminroy8365]

@robhallphoto how to fix

[@robhallphoto]

@@explorewithminroy8365 disable ID function or match the 2 digit ID on everything.

[@JP-yr1sg]

The TTL funtion of the (x1t/x2t/Xpro) can control the TT600 (Manual Flash)?

[@robhallphoto]

It will fire it, but it won't fire in TTL. It will just fire at whatever the last manual power setting was at.

[@saleshobsenz6225]

Very helpful thank you sir

[@donnawetter1513]

Is there an option to invert the wheel? Somehow I always scroll in the wrong direction through my flashes.

[@jaymarasigan3302]

can I use 2 speedlight at the same time with this 1 trigger?

[@robhallphoto]

You can use as many as you want. You have 5 groups to control the power of independently, and can technically can put an infinite amount of lights on each group.

[@RSM0047]

Can the transmitter also be used as a receiver? I can't seem to find anything online.

[@ganesanpazhaniyappan5323]

Hi... Thanks for the video... I am using Nikon d3400. I switched on af assist switch as well as turned the mode "on" in custom function settings. In camera, I selected af single servo and single point focus. But af assistance in x1t is not working? Any idea? Thanks in advance

[@macriphoto]

What battery replacement type does the transmitter take?

[@robhallphoto]

AA

[@heartweddingsphotography2490]

Quick Question Rob, how do you stop the ad200 going into sleep mode??

[@robhallphoto]

Hold test button for a few seconds to open up custom function menu (C Fn. is displayed over the test button as the subcommand). F3 has the power symbol which is the sleep function, set it to off.

[@heartweddingsphotography2490]

@@robhallphoto Hi Rob, Thank you very much, could not find it anywhere online, Brilliant :-)

[@MrMkariniot]

How to do high sync flash . Is there any button on x1t?

[@robhallphoto]

Nope. Just activate it in camera and it turns on automatically when shutter goes beyond sync speed.

[@MrMkariniot]

So I will put it in manual of my camera and automatically turns into high.? But there is no symbol of high on my flash .. is that right .?

[@billzidis2656]

I loved the video ! Very useful!

[@doubledark2]

Robert, using this Godox system to fire a speedlight which in turn was to fire off a Bowens studio flash; image was almost black, looked like only capturing available light. Dropping shutter speed to 1/40 made no difference. In the end, I used the pop-up camera flash to fire the studio lights and all worked fine. Any suggestions as to why the Godox system didn't work?

[@robhallphoto]

I have never personally attempted optical transmission with Godox gear, but the first thing I’d look at is the S1/S2 option to change the behavior of how it works with preflash.

[@KaiMattern]

While I see that Godox packed a lot of functionalitry into the unit, it still escapes me, how a company coudl come up with a user experience of the late 70s with numbered functions... That is so counterintuitive... I am still waiting for their new unit to be released for fuji connectors.

[@francescoaltobelli1569]

Does it work also as receiver?

[@superayushrestha]

Does it support my yongnuo YN568ex high speed sync if i add X1 receiver on top of it?

[@LadyBellaBurnsville]

I have this transmitter and a evolve 200 and want to shoot HDR with flash. Will this allow me to set variable exposure settings in my Canon 5D IV. Help would be appreciated..thank you

[@am75040]

Thank you so much Rob, so to enable HHS you do it at the strobe itself?

[@robhallphoto]

Nope. X1-T will automatically enter HSS when you have it enabled in camera, and go beyond your cameras max sync speed.

[@Bgvolley]

Hello i have A6000 and a Godox flash that has a hotshoe that is specific for this camera and some more Sony... I want to use one more speedflash cheap one that will be not working on the camera, but can this transmitter fire other flashesh for other cameras ?

[@myuziq]

Hi, I was wondering if anyone knows the answer to this - I can't figure out how to turn off the auto power saving mode with my X1TF trigger. It just turns off after a minute or so and I need it to stay on. Does anyone know how to set that? Thank you in advance.

[@GadgetsandGold]

at 4:10 you mentioned how to change the way to adjust by holding down Ch button for 5 seconds but then the video skips and you start showing how to adjust the mode. I cannot get it to change to that mode pls explain.

[@robhallphoto]

Hold down channel button and it will keep the groups fixed.