Golf Club Restoration - How to restore the chrome finish on a set of MIZUNO golf club irons

See how we restore the chrome pn these Mizuno MP-5 clubs. These came into us for restoration. The video takes you through all of the stages on detail. The finished golf irons look stunning.
Professional chrome restoration.
CHAPTERS
00:00 - Introduction
01:15 - Stripping
06:23 - Plating 'Layers of Feel'
11:30 - Chrome Mopping
12:58 - Blasting
14:05 - Painting
14:22 - Finished
If you need your chrome restoring please contact us:
Marque Restore Chrome Plating
2 Dutton Road
Aldermans Green Industrial Estate
Coventry
Tel - 02476 622 225
Email - [e-mail]
www.marquerestore.co.uk
KZbin videos:
How to remove dents with hand tools! BSA Motorcycle repair.
• How to remove dents wi...
How to polish Aluminium Harley Side Casings PROFESIONAL POLISHING step by step guide. (Aluminum)
• How to polish Aluminiu...
Polishing Harley Davidson Casings in 3 minutes
• Polishing Harley David...
Golf Club Restoration - How to restore the chrome finish on a set of golf club irons
• Golf Club Restoration ...
How to Restore the Chrome on Titleist Golf Clubs in 3 Minutes
• Chrome Golf Club Resto...
2 Minutes to RESTORE CHROME Bumpers on JAGUAR E-Type XKE
• 2 Minutes to RESTORE C...
Restoring CHROME on a BSA fuel tank. Full length video. How to re chrome a motorcycle petrol tank.
• Restoring CHROME on a ...
90 seconds to RESTORE the CHROME on a MOTORCYCLE FUEL TANK
• 90 seconds to RESTORE ...
1933 Morgan Three Wheeler Radiator POLISH AND NICKEL PLATE
• 1933 Morgan Three Whee...
Restoring 70 year old Allard Chrome
• RESTORING CHROME on 70...
Vintage Lamp from 1927 Motorcycle Restored - Original DULL NICKEL finish or NICKLE in the USA
• How to restore a Vint...
Vauxhall Chrome Bumper Restoration - from very rusty to show chrome
• Vauxhall Chrome Bumper...
Restoring a 1953 Chevrolet Pickup Bumper
• How to restore chrome ...
Restoring the chrome on a 1951 Riley grille
• Restoring the Chrome o...
Restoring (aluminium) Rolls Royce door handles
• Rolls Royce (Aluminium...
Video that shows why you need to pack parcels very securely
• WORST PARCEL DELIVERY ...
~-~~-~~~-~~-~
How to Make your Old Chrome Motorcycle Exhaust Look Like New Again
• How to Restore your Ol...
~-~~-~~~-~~-~

[@jamesaldridge6899]

I don’t even play golf but I feel I want a set of these!!🤣🤣 another superb job...fantastic👍🏼

[@ChromeandCarRestoration]

You and me both!

[@stead3367]

I know exactly what you mean mate!

[@keestel6975]

These are remade like gemstones, like treasures!

[@Shakusky444]

Love your nails mate

[@johnherrett7453]

Well done guys. May I suggest 2 improvements to take it to the next level? (1) I weigh each head first before starting any work, and weigh again after completion. That reveals what mass is lost (if any) by grinding out the blemishes, and the appropriate lead weight can then be added to the tip of the shaft by the club assembler. (2) I sand blast the face once all the polishing is complete but before the plating process. Beautiful appearance eliminating the chance of damaging the chrome finish. Cheers. John

[@lukewegner8043]

I love how in your videos you are so thorough from the incoming inspection, documenting existing status, and literally every step and thought process you're completing along the way until the final shipped out product. Extremely well done and very educational both from a trades perspective as well as how job shop business flow works. Love it and thanks for the videos!

[@ChromeandCarRestoration]

Wow, thank you!

[@keestel6975]

I would NEVER dare to use those diamonds of refurbished golf club heads just because of the beauty of them. But then again, they were made for adventure. It's almost just like our own lives. We will have to accept to get some bruzes and scratches in order to fully enjoy our lives.

[@algernonwolfwhistle6351]

Superb job.

[@tyler_k_videos]

So impressive!

[@ajreyes9742]

excellent workmanship !

[@christopherwilliams2092]

Fabulous

[@wickedsquared2]

Just wow need to do more of these videos

[@mattyburrows9059]

thats sick

[@Ryglado]

Great job!

[@ChromeandCarRestoration]

Thank you! Cheers!

[@DaVinci0963]

Fine, fine chairmanship. Thank-You.

[@ChromeandCarRestoration]

Thank you too!

[@ChromeandCarRestoration]

Well Spotted! I take them home and my daughter paints them

[@xgolfbatamgolfbatam4514]

amazing, good job, i want make the same next, thank alot brother...

[@ChromeandCarRestoration]

Go for it!

[@playingbadgolfwell9732]

Amazing craftsmanship. Shame that I live in the U.S. Would love to work with these guys on a set of antique Ben Hogans. Really impressive!!

[@Finchcustomputters]

Superb! I don’t think people realise how much skill is involved in our type of work. That plating is incredible Alan 👌🏻

[@ChromeandCarRestoration]

Thanks 👍

[@simonadcock2159]

Awesome

[@ChromeandCarRestoration]

Thanks

[@jonathansmith9705]

One of them should be posted in the dictionary next to the word Glinty! Brilliant!

[@golffit3066]

Beautiful work as usual. You folks are true craftsmen! I'd be too nervous to hit these after all that work

[@ChromeandCarRestoration]

Thanks 👍

[@rambler1277]

My MP5's are pretty dinged up, I'd send them in if I didn't think I'd go right back out and mash them up again. These irons are soft, and true beauties. Well done!

[@ChromeandCarRestoration]

Fair enough!

[@bobsofia68]

After watching this entire video I had to go back to the beginning & look at the original condition of the club heads. Truly amazing work!! To remove all of those nicks & scratches ... by hand none the less!! Craftsmanship & Alchemy at the highest level. I'd be proud to own those Mizu's.

[@ChromeandCarRestoration]

Glad you enjoyed it

[@camo2204]

Awesome job Alan, I didn't know that Mizuno had a 4 stage plating process.

[@ChromeandCarRestoration]

They call the process 'layers of feel". I do not know if all of the clubs they produce are done this way.

[@mattp6355]

Man my friend...all that work is worth alot of time and money...looks like it's more cost effective to by new ones unless......you just do it for yourself and re sell. That's a great idea beats me using sanding sticks and a scotchbrite . Nicely done

[@ChromeandCarRestoration]

Thanks for the compliments. However, less than half the cost of replacement and you get a finish better than new.

[@Mrcloc]

Sign me up, take my money. I bought an old set of Mizunos and I love them, but I would really love to have them restored. Unfortunately shipping them there would probably cost more than the restoration itself.

[@kiahughesy]

This is fecking amazing, which I had done this with my 690mb's instead of a black coat. It doesnt look too cheap though :)

[@ChromeandCarRestoration]

£35 each head ex VAT

[@Ckwon117]

This is amazing. You really create something beautiful here 2 questions: Is Copper weak? What would happen if someone wanted to leave it on the copper layer. Id love to have my MP32s restored but left on copper if it would hold up How much do you charge for a job like this?

[@djones1304]

Very tempted by this. Do you re cut the grooves? Mine have worn and have Chips in. Thanks

[@Followthepath89]

Wow 😳

[@ChromeandCarRestoration]

Thanks

[@PlumpHotdog]

One thing I wish I had was a media blaster, I love restoring old clubs, working on my set of Nike SQ Machspeeds at the moment but the resurfacing of the face would be much easier with one

[@ChromeandCarRestoration]

Agreed. You can buy small hand held ones that would do the job, but they are very messy.

[@cwmcclintock5757]

Brilliant and lovely job. Do you folks ever notice any problems breathing.

[@jefferyzielke7665]

Tremendous craftsmanship

[@briansgolfworks4991]

Awesome Job! I would recommend recruiting the grooves prior to the rechrome process then they'd be really like new.

[@ChromeandCarRestoration]

Thanks for the tip!

[@beardofzeus9665]

Absolutely brilliant video and such attention to detail. How much would you charge for me to get my Nike Vapor Fly irons done please?

[@snooor95]

Hi, amazing job. What do you use to blast it with for that texture ojnyhr striking face?

[@joehodge6467]

Wow that’s awesome! Do you accept work from the US?

[@kathachareonpong2001]

I live in thailand. I am playing a set of MP-5 also. Would love to get them recondition.

[@OneMorePutt]

Would you be able to do this for a Mizuno TP-P9001 or TP-P9002 putter? They wouldn't require the blast finish on the face.

[@AndreeMarkefors]

I always found guitar restoration quite satisfying to watch. As a golfer playing Mizuno MP-32s, I'll now add golf club restoration to that shortlist of most satisfying things to watch. 🙌🏻 My irons have a "satin" finish, which I guess is little more than slightly roughed-up chrome? Could you do that as well?

[@ChromeandCarRestoration]

Yes we do that. Here is a link to a video of some before we sent them out to a customer in Canada kzbin.info/www/bejne/rYjQenSDp99pqaM

[@Viz64]

I was a trainee metal finisher back in the early 80's (got out of it quickly - too dirty for me!!)and looking at this takes me back to working in the chrome plating area of the business. I have to be honest I haven't kept up with the technology but recall that we always use to degrease in tricloroethylene after the polishing process before livening up the surface, just like to know whether this is something you did before the pre plating cleaning operation. Great job on the irons

[@ChromeandCarRestoration]

You are not allowed to use tricloroethylene any more.

[@gastonmaffei1721]

hello!!! Does chrome protect sandblasting? does any product apply? Or how would the treatment be after sandblasting?

[@garryw1159]

Beautiful job. How much would this cost. They look better than original.

[@craglyboy]

Just a quick question, do you guys do weld repairs if there are significant enough dents?

[@stead3367]

Absolutely awesome job. However, I'm intrigued. On you Titleist vid you shot-blasted before final chroming, but on your Mizuno vid you shot-blasted after. Is there a particular reason for this?

[@ChromeandCarRestoration]

Yes. We experimented with different methods to see which was the less time consuming.

[@Scrunchychingo]

Great work! What media do you use to blast the faces for texturing? I’m a little concerned that brown aluminum oxide would be too aggressive?

[@bfredsaid]

Did this question ever get answered privately? Another channel I watch uses 8- grit aluminum oxide and seems to achieve decent results...

[@austinmaize2989]

Is any consideration being given to the grooves of these irons when restoring them? I have to imagine a build up of mass from the plating process may reduce the groove depth, especially for older irons on which the grooves may have already worn thin. Just curious, would be something to consider if these clubs are to be put into play as it could effect the performance of them. Absolutely love this long-form content, please keep it coming!

[@rambler1277]

I believe other club restorers provide a re-grooving service. Neither the Titleist nor the Mizunos looked like they needed it.

[@kjh010]

Those look absolutely fantastic. Got a few sets that would benefit from that. What’s average cost for 8 clubs?

[@ChromeandCarRestoration]

The ones in the video were £35 each ex VAT

[@rooriderroorider]

Can layers of feel iron heads be simply de burred to remove deeper marks , compounded and polished to a mirror finish without having them stripped back to bare metal and re chromed?

[@333brooky]

this is so satisfying where are you based? I have an old Scotty that need restoring

[@ChromeandCarRestoration]

Coventry

[@MrLukealbanese]

Wonderful work. Have you been asked to restore the grooves as well? Older irons can get quite worn and regrooving is quite a skill but essential.

[@irbose9895]

youre a beast

[@caveman3079]

whats the best someone without all this can do to their irons with items from a hardware store? obviously i know it will be minimal but whats the best one can do to spruce up their old irons, happy to spend a bit of cash to experiment with some of my old ones.

[@labattedegolf]

Hi Alan, I’m wondering when you put them in the electrical bath after cleaning it. Would a dip in sulfuric acid get the job done as well?

[@ChromeandCarRestoration]

Better to clean it electrically

[@user-il8rm3ck3b]

Hello. I have a question. How many volts do I have to get for one iron head? And I wonder how many minutes I have to soak it.

[@Musakforyou]

Do you regroove the clubs too?

[@burningglory2373]

About what do you charge to do a set of mizuno's the way you did here (6 irons)

[@gonzalocapararo3310]

Hi, can this process be done on stainless steel?

[@bfredsaid]

This is great. Is there any reason not to use Mizuno's process on Titleist Forged Irons?

[@ChromeandCarRestoration]

No. Your choice.

[@andrewgoddard316]

Hi how much would it cost to have this done on a set of 9 irons? Many thanks

[@thehinchys4469]

This is exactly what I’m looking for for my Mizuno MP59s. How much for 7 iron heads please? How do I contact you?

[@sportmurphy4392]

How much would you charge for restoring 3 Titleist Vokey wedges?

[@beethao4145]

Can I ship my old mizuno for you guys to restore. How much it cost per head

[@brunoburtoni8479]

1-Is that copper sulphate and sulfuric acid for the acid copper? 2-Can I use same process for pot metal? Nickel-Acid Copper-Nickel-Chrome

[@michaellepatourel2148]

Just wondering what is the cost involved....I have a set of heads that I would love to do this with

[@annalouie4206]

I'm interested in having some clubs restored, how can i go about that? I have emailed a few times already to you guys, do you have the time to take on new clients at this time?

[@user-hy1dp9ht4o]

круто == научи меня ==

[@ryanallman7660]

Would love to get a quote of how much it would run to do this exact process on my mizunos. Can I email someone for a quote?

[@craglyboy]

It’s so frustrating I have all this at work but can’t use it my irons 😂

[@MrChrisbain]

I have same golf clubs, how much was this?

[@joseab800]

I have a set of Tilteist vokey sm7 wedges looking pretty rough, would you be able to restore it to new? if so how much each? thanks

[@ChromeandCarRestoration]

Yes I can. The ones in the video were £35 each ex VAT

[@wedgeed]

How do I get a set to u and what's the price I live in rochdale

[@gastonmaffei1721]

hello! a consultation... the sandblasting is done before or after the electroplating processes. Thanks a lot!!

[@gastonmaffei1721]

Because whit the Titleist the sandblasting was before de chrome.. whats the difference?

[@ChromeandCarRestoration]

Either

[@jackryan2863]

I have a set of mizuno irons that I would like to have restored as well . I live in Phoenix AZ in USA . Do you know of any companies that offer this type of process in the US ? I’d also be happy to send them over to your shop . I will send you an email tomorrow . Thank you !

[@deanmatthowes]

Amazing, I have an old set of Mizuno MP 32s, 3-PW I would like refurbishing, what was the price per head for the MP 5s?

[@ChromeandCarRestoration]

£43 each ex VAT. This is including the 'layers of feel' plating process. £35 each ex VAT if straight nickel & chrome.

[@jeffbecker8716]

@@ChromeandCarRestoration Does that pricing matter how much rust is on them? I have my uncle's old MacGregor M/T set and they're an absolute mess. But they're the RST1 model, so maybe its appropriate that I just keep them like that.

[@isaacstone7899]

How much for refacing?

[@owl331]

Own T-zoid MX-11 am I able to polish them up

[@ChromeandCarRestoration]

I don't know

[@ianknight2053]

Most of the marks on irons are created by bag clatter. Just use iron head covers on your new clubs. My Mizunos MP63s are 8 years old and look as good as new.

[@ChromeandCarRestoration]

Thanks for the tips!

[@NickMart1985]

Try playing in Arizona 😂

[@motodiaries8204]

Roughly how much does this process cost for a set of irons like these? I have a set of Mizuno blades and they are getting nicked and dinged up in the bag. I'd love to restore them.

[@ChromeandCarRestoration]

£38 each ex VAT

[@sgolfmaster1993]

I have the same clubs 4 to pw how much will it cost for this

[@ChromeandCarRestoration]

The ones in the video were £43 each + VAT

[@warriordog4094]

can I send my Mizuno blade for you to restore...

[@SLEEP-236]

I've just asked for a price to restore my own. I can't even play anything due to injury and all my other gear has been sold but I can't part with my irons.

[@craigchappelle873]

Is any of this possible in a small scale version to be able to do my own clubs??

[@ChromeandCarRestoration]

With 30 years of experience I would find it difficult to achieve good results with a home plating kit. You also need all the polishing and prep equipment. Short answer is not something you can do effectively at home.

[@BradMeehan]

Can you share the voltage and current requirements for the nickel and copper steps? I'm doing this on a small scale at home on channel but I'm struggling with dialing in the power. I'm using 4.5 vdc and 1amp on the nickel and 3 vdc and. 5 on the copper. Am I close? Please see my channel if you can help.

[@Spaxcore]

All those micro dents are as a result of what is called bag chatter and it happens over time from carrying your clubs around.

[@bigblocklawyer]

Too bad you couldn't "accidentally" sand some u shaped grooves in them during the grinding process.

[@JacquesLouisBadenhorst]

Hi Alan please may I have your email