Рет қаралды 34,383
1. Heat the phone in 90⁰C.
2. Use metal blade to remove the screen off the frame (only put in on the sides).
3. Cut off the glass with molybdenum wire.
4. Clean the glue (use oca remover tool and magic sponge, help with isopropanol).
5. Before lamination new glass, put a dot of LOCA glue on the front camera place (in Pixel 4A it is necessary).
6. Put into autoclave for 10 minutes after lamination.
7. Put under UV light for about 2 minutes.
8. Glue finished display to the phone with B-7000 glue.
9. Left under clamps for 2 hours.
Done 😁
My equipment:
◉Glass cutting wire: bit.ly/3GiwqkH
◉Heat plate (glass separator): bit.ly/3hNAe47
◉UV Lamp: bit.ly/3GiVLLw
◉Glass cutting machine: bit.ly/3PTnTaU
◉Glue remover: bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): bit.ly/3hX7WUC
◉Big autoclave: bit.ly/3GdQTHj
◉360° Separator: bit.ly/3Gr6409
➥Our service official website: jerrymobile.pl
Join my page👍
/ jerrymobilepl
Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜
TRACK:
Tobu- Roots [NCS Release]
• Tobu - Roots | House |...
Follow Tobu: / 7obu
Tobu YT: / tobuofficial
Free download: ncs.io/toburoots