Rebuilding A Wrecked Jeep Rubicon Part 5

[@ShoresBoutique]

Found you this week. Your new stuff is sooooooo polished I needed to see a few builds to find your roots!

[@MrJvl1960]

These are Throwbacks when you were working on your mom's backyard on the cement pad

[@UTarcher72]

disassembling a vehicle is therapeutic to watch. I don't know why but it soothes me.

[@lfilson]

For future reference, industrial vinegar is great for removing rust. Spray on repeatedly, or soak if you can before you pressure wash. They sell it in gallon bottles at Ace. Small parts, nuts and bolts, you soak. They come out like new. Also, it gets in those areas where it's pitted.

[@noahrichardson466]

This IS defiantly from the good ol days! When they responded to comments and were on a budget!

[@78fenderPbass]

Air tools will make future builds SO much easier, especially with rusty suspension parts! You guys are awesome!

[@michaelshansen7070]

You guys are great! Nice to see you guys involved with something productive and not sitting around drinking or something. You are both really good at the videos and explaining what you are doing step by step. I sit for hours watching your projects. You do stuff correctly where others in the case of this jeep would have just pulled the frame back and call it good. Keep going, I am a fan!

[@biohazardshrimp]

Its so nice to see you clean and repaint the mechanical parts instead of just throwing it together.

[@royceisfaster]

You guys are better than 80% of the big channels out there! Keep it up bros

[@208miuwu]

Another great video guys HARD WORK = GREAT REWARDS.

[@goonzquad]

208miuwu 100% TRUE

[@miatarf4676]

I want to see a 6 hour long video. Another awsome video keep em coming

[@MrChapperzReal]

Look How Far these guys have came , 2.4M Subscribers Now, back then there was no Dangggg Son or Legit , Dude , Always will love this channel

[@LORDLANGERZ]

I’ve only just discovered the Goonzquad and now I can’t get enough, I love the builds, the interaction between you two brothers, I especially love the accents...and a weird outcome of watching the vids is that I think I love country music too lol...I wish you all the best from across the pond...Lord Langerz...peace 😊

[@krisolof7998]

Since you guys already have the axle out you should brace the rear trackbar bracket. Factory metal is pretty thin and that raised bracket that came with the lift kit increases leverage. Pretty easy to do with some scrap steel but way easier with the axle out from under the Jeep.

[@mikecolesvids]

What a positive activity and fine workmanship, well played!

[@goonzquad]

Mikecolesvids #colemanvan Thank you!!!!

[@Scotty_in_Ohio]

Great to see a couple young dudes making it happen - keep up the hustle!

[@goonzquad]

Scott Warmbier Yessir gotta love that hustle to make it. Thanks!!!

[@twodamax]

This channel is gonna get huge soon content is so good 🔥👌🏽

[@goonzquad]

Austin Maxwell Thanks! More coming!

[@walidelharrak2140]

damn right u were

[@1agajee]

Beautiful beautiful work love it

[@arnoldzachary]

Nice, the brother is also talking more in the video now, Nice men!!

[@val9499]

love the chill vibe and the DIY techniques

[@goonzquad]

STRUSKIV Thanks!!!

[@hizixyt1780]

Keep em coming!! Really enjoying theses videos

[@joeprivate2687]

You guys are doing great work. There sure is a lot of rust to deal with, up here in Oregon rust isn't as much of an answer but the prices are higher.

[@ocrun6765]

Great job fellas. Lots of work. Your videos are getting even better.

[@goonzquad]

OC Run Thanks!!!

[@gabegarner2311]

For diff covers, go with metal cloak. Superior in every way and great price.

[@TexasFenceGuy]

Ready for the unveiling of the new project build.. Good stuff guys

[@gregsmith5183]

Don't know if it's already been mentioned but you guys need a needle scaler for removing that chunky rust. They really work great and get in those hard to reach areas too. Bought mine at harbor freight, the cheaper $30 one. I've used it a lot and so far no problems.

[@motowens]

its gonna look awesome!

[@goonzquad]

MOTOWENS Definitely!!

[@xXThePointXx]

Really look forward to you guys videos! Not to sound like a safety nanny, but... Used to use wire wheel without safety glasses too, until a buddy got a loose wire sticking out of his eye ball. If that happens, I won't be able to watch y'all's videos! Haha

[@omarhusein3237]

Nice job fellas 👍

[@goonzquad]

Omar Husein Thank You!

[@VasilyBuilds]

Awesome bro!! You're already at 10k keep at it. I'm not too far from 1k lol

[@goonzquad]

Vasily Custom Builds Yessir, my goal by the end of this year is 100k. Keep up your content too we gonna be stars!

[@junaresnero3103]

245k now

[@fatguyfrommars]

1.1m now

[@fatguyfrommars]

Vastly you now have 33k subs well done i only have 3 or 4

[@josephiosefa7260]

@@goonzquad 2.3 Million now

[@syedkhurrammumtaz1078]

Awesome work... 👍👍👍

[@goonzquad]

SYED KHURRAM MUMTAZ Thanks👍

[@CovenGraphics]

YOU GUYS ARE GOOD! I SEE LAMBO'S IN YOUR FUTURE

[@natedarosa3786]

Love it man! Keep up the good work

[@ryanwatson6911]

I gotta say I always like the background music in your videos

[@goonzquad]

Ryan Watson Cool! I try to find something smooth and simple to go with the flow.

[@Brahmakilla]

I like the music as well however, With this one, I kept waiting for Napoleon Dynamite to walk out.

[@donaldhayes6086]

Good work . Only salvage part is the frame it's being replaced . Be nice if they give it a clean title .

[@rifnabagum2398]

Awesome rebuilding

[@jeremynichols1326]

Yep gotta have a hat I need a red and black one so keep that in mind when picking the colors to put up on the store site.

[@goonzquad]

Jeremy Nichols Nice, alright I got you!

[@bryanfortner1250]

You might want to consider a wet sand blast kit for your pressure washer. It would make cleaning the axles a lot easier.

[@peters4144]

Nice work. You gents need a logo.

[@paulinegriffin9899]

love the channel guys !!!! keep the videos going

[@goonzquad]

Created by Conor and Mark Thank you!! Much more coming!

[@ChrisLee-UK]

Coming along nicely guys :D Well done

[@SCDolphin0]

Another great video and I learn something. You all must be from Tenn.

[@goonzquad]

SCDolphin0 Thanks and I’m glad you are learning! Yes we are from Tenn

[@danielhartin7680]

Changing the frame? These guys aren't afraid to get in there and mix it up.

[@goonzquad]

Daniel Hartin Never afraid of a good ole challenge, I love to learn new skills and try new things.

[@Julian-do7bv]

That's what I said when they went frame shopping lol

[@philoulevoyageur]

du bon travail d'equipe

[@marlerusticgeek0075]

That was some serious rust...Way to get that axle look'n proper💪🏾👍🏾

[@Xavierpropertyshow]

Watching the whole series in 2020

[@FMF3]

Nice garage

[@richardculbertson8027]

Nice to see you are wearing eye protection

[@Julian-do7bv]

Keep it going keep up the good work can't wait to see the next video

[@goonzquad]

Julian Rada Will do, part 6 coming soon!

[@Tmaak]

bruh, vids are dope! Keep building

[@goonzquad]

Taylor Maakestad Thanks bro!

[@roccit]

Ah man, what’s that chill music?

[@asimhussain8830]

Awesome videos bro!

[@goonzquad]

Asim Hussain Thanks bro!!!

[@sailorman3]

I like your videos. You should set up a small shed for sandblasting. It would be leave a way better finish for painting and be less time consuming. Entry level equipment is relatively cheap.

[@goonzquad]

King Tut Good advice! Yea I’ve been wanting to get a sand blasting set up. Would definitely save a lot of time.

[@FightingFishTv]

Great job

[@paullaverty3038]

Use por-15 on those Rusty Parts spread brush it best stuff you can use

[@jeep3.8ssuck77]

Another great video. I like the hats I may have to go get some from your website

[@killahjeep]

should have spent the money and got a gallon of POR15.... stuff works awesome... its a marine grade paint, and you can get it glossy, or semi gloss, stuff holds up really well, and has a zinc compound in it (rust preventative).

[@goonzquad]

killahjeep Dang that sounds like some awesome stuff. I will definitely look into that! Thanks for the info!

[@BD-or2xu]

have y'all ever looked at using Penetrol for the rusted surfaces you treat, clean, and paint? i've found it works great for stopping existing rust and for paint

[@braddocksgarage]

Check out "solid" dif covers. even cheaper than teraflex and just as strong.

[@051biohaz]

Another great vid, you guys are awesome..:)

[@goonzquad]

051biohaz Thanks!!!!

[@chadharmon5716]

The smell of PB gets on everything lol

[@goonzquad]

chad harmon That’s so true lol

[@astonbritto6150]

Great job!

[@mzmarquette]

Great video~~~~ You guys are ADDICTIVE!!!!! I hate when the video is about to end! Can't wait until Part 6 is uploaded :) I want a Goonzquad cap, didn't see it in your catalog ;(.

[@goonzquad]

mzmarquette Thanks!!! Part 6 will be here soon! I’ll be putting them on the website here soon.

[@MrHockeyskatr43]

Make sure when you order the diff covers they are for the Dana 44s front and rear the teraflex ones you showed looked like there was one for a 44 and one for a Dana 30

[@goonzquad]

Cameron Brands Yea I made sure. I had to message them and specify that. It was $10 more for the Dana 44 covers.

[@MrHockeyskatr43]

goonzquad good stuff love the vids!

[@trentyoung8528]

You guys ever throught about getting a sand blaster?

[@goonzquad]

Trent Young Yea a sand blaster would make it a lot easier, we’ll definitely get one in the future. Just working with what we got for now.

[@frederickhillegas2115]

Yes I agree 100% a sandblaster is a lot faster and gives better results

[@jahns1586]

Just to let you guys know!! I saw you looking at the differential covers on eBay. The rubicon has Dana 44 front and rear so the one you looked at won't work, as one of the covers was for a Dana 30

[@goonzquad]

Yea I made sure to get dana 44 covers, it was $10 more.

[@540isilver]

get some air or battery power tool great video

[@vitalydrevenchuk3467]

I noticed a a bad ass f250 will you be doing a video on that build ?

[@UncleSam077]

Check out POR-15 for what is arguably the best pain-over-rust enamel that you can get. Its brush on too and has a high gloss finish. Not UV resistant though, so it will fade in areas of direct and exposed sunlight.

[@goonzquad]

Samuel Ross Thanks for the suggestion, I’m gonna look into that.

[@drvnucrzy]

Man it must be awesome to live where there is no salt. Jeeps don't last up here in the salt belt. Also new subscriber so I don't know a lot of history of the channel. What do you guys do for work?

[@HP.Customs]

Bring that project to my house you can use the lift in the shop all while using pneumatic tools.

[@goonzquad]

H&P Customs That would be awesome!!!

[@thebuildinginvestor8427]

Nice! 😁

[@gradymcnutt2247]

Another great video. From an old fart Jeep owner you 2 are outstanding.

[@goonzquad]

Grady McNutt Thanks! I’m glad you like the videos because I love putting them together!

[@rickb8808]

Take it from someone who ended up in the emergency room with a bristle from a wire wheel in their right eye, think safety glasses son. And it hurt like hell.

[@goonzquad]

Richard Bricker True true, definitely safety first!

[@Leo-lr4eq]

I wish I had the time and money to do this!

[@772777777777777]

You need to use muratic acid on the rust to kill the rust... and a sandblaster...

[@rogue572]

At 10k subs you HAVE to do a Q&A

[@goonzquad]

And a GIVEAWAY

[@МауленОмарбеков]

Guys you've done awesome job. After when you finished your project are you going to sell them?

[@hickoryridgefarms]

You guys need a cordless impact

[@kavin7610]

Did you guys have Thomas when you built the rubicon

[@AnthonyWebb7]

How do you keep all your parts from getting mixed up?

[@goonzquad]

Anthony Webb Since we both had our own Jeep TJ’s and always worked on them, we kinda just memorize what goes where. Also we have the video to reflect on and go over if we forget something.

[@davismathis845]

Your vids r really cool keep it up 🔫

[@goonzquad]

Rainbow of Sparta Thanks!!!

[@firstnamemiddlenamelastnam9563]

Finally a vid

[@goonzquad]

bitch no Yessir

[@JohnDoe-zr6bk]

Why didnt you use eine rost converter in it? All the remaining Rust under the new paint is gonna rust again...

[@jasonswift7098]

Keep up the good work guys! are you all self taught through video's or have you done like mechanical jobs?

[@goonzquad]

Jason Moyle Somewhat self taught, but mostly research and previous experiences.

[@Twizter68]

So far good job! I've gotta ask though...why not get the "new" frame powder coated? That will provide more protection and last a LOT longer than rattlecan rust buster paint.

[@goonzquad]

William Mims Thanks. Yea powder coat is the best way to go, however since we try to stay on a slight budget to leave room for profit in the end, we will go with the next best option. It will still last a good bit in the south.

[@legoMan104]

Look into getting a 1/2 impact and a 1/4 impact made things goes so much faster

[@goonzquad]

legoMan104 We do have impacts, honestly we just like to keep it quiet and old fashioned haha. Will help to speed things up, definitely will be using it next time.

[@edgaraguirre547]

Any Jeep Commander videos project coming soon?

[@goonzquad]

Edgar Aguirre Possibly

[@tgrif5082]

Time to get a good impact

[@goonzquad]

T Griffin Definitely! You got any good suggestions?

[@tgrif5082]

If you use Milwaukee on your jobsites, their cordless 18v impacts are great.

[@angelmataaa]

Notification gang!

[@matttruenorthstrong8009]

You guys have the F250 and white jeep for sale?

[@goonzquad]

matt strong Only thing for sale rn is the white Rubicon

[@davidr1997]

Get a air powered impact wrench/gun. They are dirt cheap!

[@goonzquad]

david raaymakers We have air tools, we just wanted to work old school lol.

[@nanana5264]

Good work guys ! By the way ? Whos car is this going to be

[@goonzquad]

Amine fcb Thanks!! This is going to be my brother Jeep.

[@duncanholliman85]

Ever thought about using a rust converter instead of having to wire wheel everything?

[@duncanholliman85]

www.krylon.com/products/rust-protector-rust-converting-primer/

[@goonzquad]

Evolutiondenied2 Yea, I need to try that out!

[@devinrochelle2176]

Nice

[@otfjovan107]

I'm an O.G sub once you hit 50,000-100,000-500,000-and finally 1,000,000 subs

[@goonzquad]

Legit

[@JohnDoe-zr6bk]

Is PB Blaster similar to WD40?

[@bubberrand]

Where oh where has little Thomas gone? Where oh where has he gone?

[@medi58]

nice

[@goonzquad]

MEDI TV Thanks!

[@jamiejoyeux1669]

vids need to be longer

[@studiosdmv9214]

Yeah they do, love there videos though! Keep it up bro