I bought a cheap USB Shifter for my Sim Setup!

[@Goosiest]

Question of the day: *Should I start reviewing more Sim Equipment?* (I found a budget steering wheel too)

[@toomuchpower1353]

Yes

[@ZackPlayzYT08]

Yes you should

[@JT_Uwah]

Yessss do it it'll be fire 👍👍👍👍

[@gamehacked25th]

Yes bro we will like it too

[@ethanorille9890]

YES!!!

[@Yeetixyt]

I love those “buying cheap stuff” videos. If its games or sim racing equipment. Those videos are just good!

[@Goosiest]

Glad you like them!

[@xxTHExxABYSSxx]

We love them and so does the algorithm

[@adamallman4392]

goose can u buy sim racing setup????(like with seat)

[@Cars_are_gut]

Bro we need more of theese😅

[@worldchamp1999]

yea but this product is not

[@ZabelGameZ]

Those buttons do seem more useful than I thought. I use the two on the lower right on the base of my wheel. I had the same issue trying to push buttons with the wheel spinning.

[@theslybaconirl]

From my knowledge, the buttons on the shifter are mostly for Truck Simmers. Range and Splitter buttons, some of these ebay/aliexpress options come with the buttons as a switch on the shaft. They work really well as someone who didn't think they would want a shifter until after building a cockpit and starting to branch out on its uses.

[@user-oo8zt1sc1c]

Correct, analog functionality to those equiped with an interruptor attached to the stick.

[@TURBOMOOSE]

I've been using mine for close to two years. I have the 7speed version in black. I absolutely love it. Feels like a chassis mounted shifter in a bmw. And man the clunk is sooo good! Hope you enjoy yours buddy!

[@risky4you855]

How did you make it work in Assetto Corsa? Mine wont get detected Ingame but in Content Manager it works

[@TURBOMOOSE]

@@risky4you855 make sure you have manual activated. I think it's ctrl + g

[@rolux4853]

@@risky4you855 how does it not work? It’s just a generic usb button device. You assign the gears to the buttons and it’s fine. You can do dogleg etc, whatever you want!you can even make a column mounted manual if you want to go wild! This thing is better than every shifter unless the high end stuff that costs 500+. I have the 6 speed but I think about also buying the 8 speed and a splitter shift knob to haul semis in BeamNG. Gooses criticism is just ridiculous! Did he ever drive a sporty manual car in his life? The thrustmaster shifter is so wacky, just like the Logitech! They feel nothing like a real car, they feel like toys! This cheap shifter really feels like the shifter in my bmw e36! I optimized it with a bmw shift knob and leather shifting sack that I got cheap from a crashed bmw. They are all over eBay as spare parts. If you want to make it quieter just stuff foam inside the huge metal case of the shifter. He also did not install the shifter properly, you have to of course screw it down! It’s much more stable than the thrustmaster and Logitech junk. Especially that stupidly overpriced thrustmaster isn’t worth half of its money!

[@giacomovds]

i will love to see reviews of other steering wheels ( such as a cheap wheel ) from other companies and you can tell if it's good for drifting or racing or it's not worth to buy it's also very important to have a good wheel even for a beginner ( rookie ) to learn and gain experience

[@Goosiest]

Noted!

[@giacomovds]

Thanks I have also a wheel a t300 like yours and also a gt version and it's a really good wheel

[@antwonfisher91]

There should be 2 mounting holes under the shifter (you can see them at the :55 mark). Those are more stable when only using 2 bolts, and I would guess are the intended bolts for the table clamp (I do not have the table clamp, and hard mounted the shifter to my rig). Using the holes underneath would also move the shifter closer you. I don't think the side mounting slots are designed to be bolted down from one side

[@MthellRacing]

Hey goosiest, I have an "aftermarket" shifter as well that I think you could love yo try! SHH shifters (3d printed) but it feels pretty similar to a tp8h! Does sequentiel and H pattern which was a huge bonus for me for rally games. It was CAD $100 so about $80 USD!

[@Goosiest]

Interesting!

[@eggfool1428]

Dang, thats a good deal

[@Flyppy21]

I also have one and it's honestly great. It's adjustable, it feels great to shift and the 2 in 1 shift mechanisms is awesome as well. You can get different top plates like 5MT, 6MT and 7MT and the build quality is very good for the price.

[@drewfelts4788]

Does it work on xbox

[@thecafesimracing2628]

I bought myself a Aliexpress one a few months ago and I'm quite happy. It's even better once it's used and "worked in"

[@eggfool1428]

Interesting, How much was it? Can you send the link?

[@marioarita1164]

@@eggfool1428 shiii i bought mine on amazon shit was like 100 back when i got it plus the mounting plate which was 50 bucks, but everything went down on price soo now depending on which company u buy from is like 60 bucks

[@marioarita1164]

@@eggfool1428 ooh and the feel is really good bro it actually kinda feels like a real short shifter

[@xb7026]

How is it now?​@@marioarita1164

[@dyibyq73]

i like that force because it feels soo good

[@Editzz-4wx]

You always find a way to entertain us.Keep up the good work!

[@MrVlodato]

TBF the mounting pattern is perfect for the majority of rigs. its not meant for a desk. Mine sits right where the shifter would be in a car. If you open it you should be able to loosen the spring tension a little to lighten it up a little.

[@Oceanlver]

3:14 lol now you Can do a blind attack (Blind attack is a technique used by takumi in 4 stage that he turns the light off to the opponent not see him,it works perfectly in games that can enable and disable headlights,mostly,Asseto Corsa

[@grtych]

These two buttons would ideally be used in Truck Simulator for Hi/Lo Range and Gear Splitter

[@erseniko]

Try mounting the shifter with the holes on the other side of the shifter to the clamp, than it should be on the same level as your handbrake

[@not_highmations]

Finally somebody said that i thought i was the only one who noticed

[@hariszubair]

The Way you Say Buttons is Awesome

[@MartWithanM]

I think the buttons are for trucking games to unlock more gears and to switch from high and low Also I think this is a great alterative to the Logitech shifter as it works with any setup

[@AatroxSuppMain]

That's the first thing I thought of when I saw the buttons, put the jakes and splitter as a toggle on it. I'm debating getting one for ATS/ETS2 when I move

[@MartWithanM]

@@AatroxSuppMain using it for Airbags in games would be pretty cool too

[@Skidtire]

@@AatroxSuppMain its a great shifter very notchy and enjoyable to shift

[@Guylive09]

Yes that would be great for beginners and people who want new equipment

[@HH-jn4qr]

I got my thrustmaster shifter secondhand for £40 which is like 46 dollars, works perfectly

[@Goosiest]

Ohh that is insanely good deal

[@fueg00nyxxx]

R.I.P MF DOOM!

[@HH-jn4qr]

@@fueg00nyxxx RIP

[@qwikdrifts]

Yoo i bought the sane one, came in 4 days ago. Im VERY happy with the quality for the price. Feels very good shifting through gears. Cant go wrong with it

[@Baarkszz]

I actually just got this one! Received yesterday, been rocking on assetto, euro truck and forza and it’s so good

[@WackyGiahuy]

3:24 "Flick my headlights to people in front" while pressing button with middle finger, nice

[@tyresesmith7795]

I know that if you put review videos on drifting setups, you'll get probably a wider audience (like new people starting out), which will honestly lead to abit more views, thus more 🔥 videos.

[@yogetupibe]

I think i know the reason to why It is more dificult to shift, thats actually because the shifter "simulates" a real gearbox by adding that extra resistance, because inside of a gearbox has gears, that have a resistance to moving, thats possibly why

[@Astrophile.01]

Being a mobile drifter is amazing now, all the courage I’ve got from your Vids, I’ve gotten better, thank you Goose ;)

[@aiden0002]

I bought them on a chinese website for around $40, its an amazing shifter and mine includes Hi Lo gear switches which was amazing for trucks, I definitely recommend it over other shifters

[@user-oo8zt1sc1c]

Nice! your comments is nice for me as I am currently waiting for mine. I have great expectations on it.

[@defour6475]

litterally use the same shifter. bought the clamps for 60 cents at a hardware store. installed it right next to my leg in a more natural position. really love it

[@tempolegand7265]

I love how you put the middle finger when you were pointing at the buttons lol

[@chronophobic]

I bought one too! 7+R so clunky loud, already changed a gear knob, I'll try to put a shifter cloak on it in the name of reduce noise, 7 speed is useless because most car is 6 speed H-pattern, 7 speed and above is sequential(not counting camaros). So my point is to get a 6 speed is good enough, even for truck simulator you only need 4 or 5 range with splitter and range selector, often mis-shift but for 40$ I love it a lot! ETS2 and PCARS2 is working, WRC9, ForzaH4, NFSHEAT and TCREW2 not working. Compatibility is yet to be improve.

[@solid_nerd2071]

i love the goose hand brake its like youre choking him

[@bakeeeeofficial]

SOO GOOD these vids are soo gooooooood!

[@Jaquaivious]

I've had that shifter for about a year and it still works perfectly and we bolted it to the setup instead of needing a clamp so for me it was very worth it

[@risky4you855]

How did you make it work in Assetto Corsa? Mine wont get detected Ingame but in Content Manager it works

[@Jaquaivious]

@@risky4you855 idk mine just worked fine maybe theirs a vid on it not working

[@B5s4]

883k subs and good ol’ Juicy Goosie boyyy rocking his set up on desk still. His wallet is just as tight as his drift lines!! Goose, I bow to you good sir! Peaaaaacccce!!

[@stoway8459]

I agree with you in the button part of the steering wheel lol, so accurate

[@MrFordy90]

Review some 'budget' Direct Drive gear too, keen to see how that compares to the Thrustmaster gear for drifting!

[@neska2k]

Used the same shifter for a year soon and have nothing to complain about. Does the job.

[@adambarrs92]

I've been through 2 TH8A shifters now. My second one randomly just broke again last night. At £170 I cannot justify another one so ordered this along with an ebay special handbrake to go with it. They seem pretty good for the money.

[@assadrehman2427]

The buttons makes sense. Good Video as alwasy

[@assadrehman2427]

Typing mistake: Alwasy 'Always'

[@ibtihazYousuf]

I love your driving skills goosiest :)

[@Skidtire]

I have had one of these for about a year now, be warned if you order one of these also order extra gate plates for the top, if you do hard driving like technical courses in dirt rally and you're always banging up and down the gates eventually start to delaminate and break apart, Great shifter though, feel in the hand beats the brakes off the TH8A or G29 shifter

[@sunbagels1999]

ive had that shifter for 2 years now works great

[@Intothemassacre11]

I've actually seen a lot of ppl talk really good about these shifters. The buttons are OP.another banger vid bro!

[@Goosiest]

Appreciate it!

[@2nyameddelanden]

I've had mine for almost a year now, still doing its job very well!

[@butteredtoast740]

After watching this I ordered this shifter to go with my new T300 upgrade. Thing is a beast and feels very real!

[@kevincorrales5129]

I bought mine three days ago love it

[@SOfilmable]

I have this shifter and the TH8A and feeling wise, this cheap shifter is way way better, it feels real. I love the design and knob also.

[@faixanali961]

HOPE YOU GET YOUR 1 MILLION SUBS SOON

[@CreepzOnTop]

to get the shifter closer put the bolts to mount to clamp to the other side of the shifter and clamp it the same way it sticks out like the thrustmaster one

[@Banana_leclerc16]

100k more subs and 1 MIL keep it up goose 100k more and 1 MIL is on your way

[@MatTheGreatt]

Great video! Please do something like this for an E Brake, because I am getting one soon and not sure what one to get

[@shadowgamer4819]

you goosiest about the shifter being far away from you, you can tighten the bolts on the other side of the shifter and letting the shifter hang closer to you, but just make sure to tighthen them well so it doesnt fall.

[@semiijs]

using this shifter for about a year now. no problems at all. plus that white plastic thing makes this shifter into a sequential shifter in few seconds. So defenatly better, than thrustmaster shifter

[@risky4you855]

How did you make it work in Assetto Corsa? Mine wont get detected Ingame but in Content Manager it works

[@hashibira5541]

It is more realistic and great looking to me thanks for continuing your vids

[@prohipo]

Rotate shifter on the bracket, get some sort of flat thing you can bolt on the clamp to sit on the table so it won't fall

[@TheHuskyGT]

If you're using a Logitech wheel, this could actually be an upgrade over the stock Logi shifter. I use a Simvertex Eaton Fuller truck shifter knob for ETS2 and ATS that is way too heavy for the flimpsy Logitech shifter. Like, you could literally blow on the shifter and it will go into the next gear. I will give this thing a try if it is as sturdy as you say.

[@LemonCookies]

Sub review.. ive had mine for about 6 months and i slam gears when i shift all the time so its taken some abuse. Ngl i love the clunk. I made my own mount for cheaper, pretty stable. I havent tried the thrustmaster one but i love this one. Inside of it is just an arduino board hooked up with 8 buttons coded and ready to go plug and play. Recomended. Only thing is i wish the cord was abit longer cause the way i have it set up its just barely long enough lol. 10/10

[@Kurtys_Jacks]

555 video !!! Almost 900k gg goose

[@thatoneguy402]

Dam goosiest be livin' my Drem life😂🤣

[@dib-9624]

i think this shifter is really good for diy sim setup.💪🏻🔥 thanks for the recommendation shifter 😅👍🏻💯💯

[@Goosiest]

No problem 👍

[@user-wm9pj2xj7z]

I bought the same shift just the 7 speed about a year ago, i also bought a different mount that puts it lower and more toward me. I love how notchy it is, it feels better then the thrustmaster but the only only problem i have with it is that its a bit loud. But i highly recommend it over the thrustmaster

[@Munka1985]

I covered mine in carbon wrap material (sides and top) and it deadened the noise considerably.

[@user-wm9pj2xj7z]

@@Munka1985 good to know

[@risky4you855]

How did you make it work in Assetto Corsa? Mine wont get detected Ingame but in Content Manager it works

[@Munka1985]

@@risky4you855 sorry to say i didn't do anything, just worked in content manager and in game for me. =

[@abdulazizalzaghel6843]

goose if you place the clamps from the other side it will extend towards you i would like to see you try that but it might be unstable

[@zayinconde8971]

I use this shifter and love it. Don’t feeel the need to upgrade. Ive built my sim so I made the shifter position fit perfect. I love that the shifter really clicks in gear (cluncky) Reminds me of an old gt3 car or a dog box from an irl car. I’ve had my shifter for a little over a year and no problems. Can’t say the same for the Chinese handbrake though…

[@risky4you855]

How did you make it work in Assetto Corsa? Mine wont get detected Ingame but in Content Manager it works

[@jimjones_koolaid]

Do these work on console as well?

[@GarryPimentel]

Keep up the good work goose👍. please daily uploads cant wait for a new upload😊

[@Goosiest]

I will try my best

[@eggfool1428]

Ive been waiting for this video since you mentioned it a while back lol, Nice 👍

[@WazzupTN]

looks solid & dope tbh❤️🔥

[@SlipStream_69]

Nice video goosiest i want the next video which means in 2 days with m3 e92 gts and lexus lfa by the way keep the hard work 💪👍

[@risingheat198]

u know what I am going to say the best thing ever STAY SIDEWAYS

[@MaK_K_Ksim]

Brooooo,is amazing idea "review sim gear" YOU MUST DO THIS,ITS SOOOOO COOL

[@AnikiTV]

Maybe you can try mount the clamp on the other side of the shifter. I think the button might be useful for ETS2 to get to gear 7 & above, I don't know I haven't played ETS2 yet.

[@GoshTimeBR]

As a g27 user, having buttons on the shifter is goated no cap

[@JustDuckpair]

When any one makes those cheap stuff vids i most of the time end up geting something!

[@Itsazercraft]

goosiest i just wanna say thank you because i cant get a sim setup neither carx online my parents dont want to buy me anything im glad u make me happy i am just sad that i cant get any game to have fun with roblox isnt that good for drifting i hope someday i can get the things i want :( again thanks for making this content for us!

[@Xtooill]

Crazy video buddy 😈

[@Goosiest]

🤙

[@ZackPlayzYT08]

Hi goosiest, Love your content, keep it up, and your also my idle, my dream is to become a drifted like you. You are the best drifted and youtuber. Your biggest fan

[@bigandrew07]

love the shifter, think it’s great for the price and all, love the new style of content too

[@theg6157]

Quaker always makes my day

[@mrgreenhs]

If it is as robust as it looks you could maybe mount it from the other direction to get it closer to you. The table wouldn't support it but maybe it would hold if you are not too violent. Good content dude!

[@trytimesouls8977]

Love it! I would Like to watch some Budget gear Reviews!

[@Goosiest]

Noted!

[@frag2op514]

Loved it, plz make more of these

[@BeverageOfSorts]

damn, ultra budget option you should have tried mapping the handbrake to the buttons to see if it can "replace" that too

[@MatTheGreatt]

1:32 "I hope you can read chinese" A small amount of people will get that joke, but if you know the guy J Perm than you will

[@skr9568]

Enjoyable review and I think many are going to find it helpfull! However you overlooked the two buttons on the base of the Thrustmaster wheel. They are always accessible and one of many reasons I decided to jump to a TM setup with shifter, comming from a logitech. Keep it up with the good content!

[@Goosiest]

WTF I didn't even know about those buttons! AFTER ALL THESE YEARS!!!!!!!!!!!!!!!!

[@MthellRacing]

@@Goosiest no wayyy LOL

[@MidwestSteeze]

:looks at T300: son of a....! I didn't realize those existed either!

[@_CUBED_]

Cool new addition goose! ❤

[@squadenjoyer]

worth it, you can buy polish SimMasters shifter, best for money

[@battyflaps5410]

yes buy that new wheel these reviews are good and helpful to people getting into this stuff. I'm hoping to get a thrustmaster wheel like yours next year my logitech G25 is just worn out af lol

[@bluethesecond6640]

Some plank and screws can change the shifter position

[@frixsy86cris66]

Yo goose keep up the good work man and i hope you make like initial d recreations, Love you bro!

[@kngflexa100]

I think that the goose handbrake and that shifter are the best combo ever

[@MedienGulli]

using a similar shifter and i love it. its very sturdy and will possibly last forever.

[@tokyotaka2930]

finallyyy shifter looks nice goose

[@hughisweir]

i like your vids about budget stuff

[@TruckdriverJONTEZZ]

Nice shifter good video man!🙂

[@Goosiest]

Thanks! 👍

[@nyanhtetoo3283]

this shifter is more better than i expected

[@heyiblank6510]

Getting this one for sure

[@LechLive]

Unbolt the clamp from the shifter and slide it to the side without the buttons, screw the clamp onto the shifter.. (On the side furthest from you if that makes sense) then clamp it back on the desk. It should put the shifter beside your handbrake.

[@Goosiest]

Would not be stable enough then sadly

[@LechLive]

@@Goosiest Ahh :( my bad bro

[@w6dervr538]

keep it up buddy i love all of your vids

[@FlakerGamer]

Have a other better clamp to it this clamp put the shifter more close to you and is not on the table is before the table

[@mmafan1909]

After all my research I found the SHH shifter to be the best for the price and I love mine.

[@splash943]

keep up the good work your amazing....probably the best drift youruber.Maybe better than ctoretto

[@Goosiest]

Take it back, nobody is better than the legend CToretto!

[@splash943]

@@Goosiest Soooo sorry goosiest

[@twizzygrizzly2163]

Pls make more review videos like this goosiest