This video is about GoPed Throttle set up, Tips and Tricks!
Пікірлер: 35
@setnthahookwitstubbs2973 жыл бұрын
Appreciate the Tip!!! Awesome tip!!! Thanks DS!!!!
@charlieryan17366 жыл бұрын
Thanks for the great tips
@markadlawan4172 жыл бұрын
Great info! Thank you
@josephanzalone46548 жыл бұрын
another great vid man thanks I'll use that on my ped to
@jordanfields51708 жыл бұрын
Can you please make a video on HOW TO TUNE YOUR GOPED?
@i4NiLeon115 жыл бұрын
Jordan Fields have you found out how to tune?
@JChurchua3 жыл бұрын
Decided to do this throttle slack mod, I used a 16gauge brad nail that i bent/crimped around the cable sheath and trimmed after i got it set up. If the cable itself stretches i can add addition brad nails as "spacers", super easy setup. GoPed GP460 with 7/72@6700Feet of elevation goes about 35-36mph all out!!
@enriquem77148 жыл бұрын
I need help tuning the carburetor i know my scooter can go faster after i try to tune it but just can't get it right. Can you do a video on how to tune the carb and how to get the max performance thanks
@alanrowe45015 жыл бұрын
One could also go and buy a BMX brake lever which has a cable adjuster built in to it and as the cable ages/stretches you can adjust it on the fly.
@earlebird42627 ай бұрын
The flaw is not in the lever, it's in the cable. There should be a ferule at the end of the cable. The lever housing is not machined out too big, it's big enough for the ferule.
@milehighgo-pedclub77878 жыл бұрын
hey Derek, i was wondering where i could find some pro slicks and wheels like on your Ferrari ped or the tangerine dream ped, i cant find them anywhere!!!
@Thegoodlife5106 жыл бұрын
Thank u
@Arizona-.Native.Joshua8 жыл бұрын
Hey Derek I just got a gp460 engine and I was wondering what's the best way to break it in. Thanks
@luisbenitez34283 жыл бұрын
But where can you buy the handlebars and Neck that you have on your gopeg thanks
@theyounggamer14293 жыл бұрын
How do I set up my throttle on a blade z got gp46cc having problems connecting wire to carb
@i4NiLeon115 жыл бұрын
I have a new Go-ped Interceptor and I am having trouble tuning it. There are no videos anywhere online that explains how to do it. They all show someone tuning their Go-ped without explanation and without even showing where to tune. The instruction manual doesn’t have instructions too. The video it has linked is more of a commercial than anything. Can you please help me with this issue because every time I try to tune my engine it begins to lightly smoke and I shut it off. Thank you
@kdotktimetopurge85496 жыл бұрын
Where can i buy a one of them.from any link s please
@sasquatchnunu5068 ай бұрын
I know this was awhile ago but is the throttle cable spring essential? I purchased: *BF/GSR Throttle Cable - Braided Carbon (71.5")* from DDM.. I have a GSR Cruiser. Is cable length ok? Also is the spring for throttle needed? walbro 990 carburetor, Zenoah G290RC. Are the RC engines built for Peds as well?
@earlebird42627 ай бұрын
The throttle cable spring just helps keep the cable from popping out of the pivot on the throttle shaft.
@user-vv5wh5dv5x5 жыл бұрын
Where does a physical store sell?
@josephanzalone46548 жыл бұрын
Hey when will u make a vid on how to properly vent a gas tank cuz I wanna do it to my ped
@123DerekShort8 жыл бұрын
+Joseph Anzalone Its on the list but its not a high priority. likely will be a few months but who knows... If i get enough interest I may do it sooner. Got a lot going.
@josephanzalone46548 жыл бұрын
+Derek Short Ok thanks
@KamenKachev7 жыл бұрын
Why all go peds have lever throttle? Is it uncomfortable to ride a go ped with twist throttle?
@MRCALIEMS6 жыл бұрын
Kamen Kachev mine has a lever
@Jamerblamer6 жыл бұрын
with a scooter having a twist throttle is dangerous, I personally think why is your standing on a board with no restraints, also if you get on a torn up road you have to have a firm grasp on the handle bars, with a twist throttle it would be hard to stay riding while keeping in control................
@KevinTrollsten8 жыл бұрын
where can I buy a better throttle? I can't stand the stock ones but I can't find anything online. I'm tempted to use a break lever from a bike instead. would that work as well?
@Jamerblamer6 жыл бұрын
yes, as long as the ends fit.
@tonyfitz63388 жыл бұрын
Use smaller Zip ties it will work better.......
@joshmarcum70838 жыл бұрын
Does this work for the go ped riot?
@123DerekShort8 жыл бұрын
+Josh Marcum Yes, I will also be making a new video very soon on an update mod that makes this even more easy to do.
@abdulrahmanshah55028 жыл бұрын
og
@dallinostler77478 жыл бұрын
Hey Derek I've tried messaging you on your Facebook page, I can't get the message to send for some reason.