Can't Fill Your Car With Gas? Simple EVAP Checks To See Why The Fuel Pump Keeps Clicking Off

[@juliomulero9303]

Bro! This video is the sh!t… I learned a lot; thank you. A lot of people pay money for mechanics/techs to do this type of work without knowing the process. Glad you took the time to thoroughly explain it. 👍🏽👍🏽

[@Barracuda48082]

What was this systems actual purpose in the seventies, ? If the canister clogged or the vacuum valve stuck, we smelled fuel instead of a $1000 dealer bs repair . Smelling gas was daily for 100 years. No one died, even the stats of gas stations blowing up were minimal when the service attendant filling your tank was smoking.. manufactures went along with public groups to address the odors to make cars more appealing to the less masculine. Sales. In larger numbers. More plastic to age, extreme temperature failures, Yes I do dislike plastic in the wrong applications.

[@mikeburton1733]

Hey Mike. Good to see you're back in your office. Hehe. I just had a similar problem on the wife's f150. I tried to talk her into pulling off the tank side hose of the purge valve before filling up, but she made me find and fix the problem instead. The atmospheric hose was connected to a steel bed support channel. It was FULL of that same dust you have there and couldn't exhale. Plugged solid. See how much you've taught me!!! Thanks for all you do to teach us Mike. Much appreciated.

[@GoTechTraining]

Hey Mike!!! That's an awesome find. We are all learning together my friend :) Have a good one! Mike Becker, Senior Instructor

[@markconway7189]

@@GoTechTraining stage 5 clicker in a gas can diesel

[@mikechiodetti4482]

I remember when GM had pancake filters at the bottom of the round charcoal canisters in the old carburated pickups and Surburbans. A quick way to fill older Ford Explorers when they wouldn't take gas was to open the hood, remove the green cap on the evap line and push down on the Schrader valve. That relieved the tank pressure and fuel went into the tank. Good to see you Mike, hope the family's doing well! Thanks for this video. Don't know for sure about my wife's 06 Kia Sorento V6 if it has that filter.

[@GoTechTraining]

Hey Mike, hope all is well! Any way to get the pressure out of the tank will work! Thanks for watching Mike Becker, Senior Instructor

[@daviddowns7552]

i remember those on my 77 buick electra. they were in front of engine passenger side near radiator as best as i can remember. easy to get to those.

[@billyyoder8171]

Thank you Mike. Good job. Have a blessed week to you and your family.

[@GoTechTraining]

Hey Billy, thanks so much! You as well :) Mike Becker, Senior Instructor

[@SmittySmithsonite]

I sure miss the days when 9.8 gallons of gas cost $8.62 instead of $31 & change ... 😖 Good to see ya, Mike! Hope everything is well over there. Fantastic explanation as usual. That fish tank setup rocks! Nice work on that one. Looks like it has become more advanced from the last time I saw it. Glad that was an easy fix for ya, and you also got to teach countless folks here on KZbin. A WIN-WIN! Thanks for sharing, and have a great rest of your day!🍻

[@GoTechTraining]

Hey Smitty! I miss those days as well! The fish tank strikes again ;) have a good one dude! Mike Becker, Senior Instructor

[@daltonbrasier5491]

$45 now lol

[@borgsimpson935]

Great tutorial, honestly I've not been handed this repair once. I have heard of this, but never seen one. Thanks for the Knowledge. Now I know.

[@GoTechTraining]

Hey Borg Simpson, thanks for watching! Now you know for when you do get one ;) Mike Becker, Senior Instructor

[@borgsimpson935]

@@GoTechTraining thanks for the reply. You all should know, I subscribed and watch the videos. I like all. My favorite Automotive instructor gave the best advice in electrical class. " Learn, Unlearn " so much thanx.

[@mariagreene4868]

Ha! I sold a brand new Astro Van with this problem years ago. Guy could only put in 10 gallons then click, click click to 20 gallons. He brought it in under warranty, they couldn't find the problem, so he did a lemon law buy back, replacing the vehicle for another Astro Van. After all the paperwork was done, and he was ready to leave he wondered aloud, "hey, is this van going to have the same problem?" I replied, "I don't know, let's go see" It did. He didn't have to but he took it home anyways. Design error. My old VW also had the problem, I turned the pump handle 90 degrees and was able to fill the tank.

[@davidjohnson3977]

This was the BEST video out there. Thank you. Now to the garage...

[@GoTechTraining]

Hey David, thanks so much! ~Mike

[@bernardaflores1720]

It seems you are back at work doing videos. This is going to be a money maker just like the cabin filter that almost no one changes. Great info, I learn something new today.

[@GoTechTraining]

Hey man, thanks a ton for watching! Yeh, we're back at it for sure! Mike Becker, Senior Instructor

[@parochial2356]

Mike: good to have you back making videos. Family doing well? Great evap training for new Techs.

[@GoTechTraining]

Hey, thanks! Yes, family is doing great, thanks! Mike Becker, Senior Instructor

[@robegeor]

Thanks for the video. Gives me some things to double-check. Oddly enough our 2014 Jeep Cherokee has the clicking-off-while-fueling-issue seemingly when the gas stations switch to winter-blend fuel. Come springtime, it starts fueling up with no issues again until the Fall. Really frustrating and while the dealer has tried a couple things, they are now claiming that the next step to replace the entire fuel tank.

[@GoTechTraining]

Hey Robert, That's a interesting problem! I wonder if the outside temperature has an effect on the issue? Thanks for checking out the video! ~Ryan Wilsing

[@tttony9426]

yes thats been me at the gas pump,CLICK,,CLICK ,CLICK,,CLICK,i get peowed every time but never stop long enough to fix the problem,but now i will because of your video,now i just have to find the stupid thing on my 2008 f250,v10,,thanx a bunch,i just subscribed to your channel,,😆😆

[@chrismc410]

Will a Jerry can bypass the click

[@celedhion]

Having this issue with a 2010 Ford Escape, which is apparently notorious for having a range of fuel issues, including a check engine light for debris. The car and the manual even tell you to use the fuel funnel essentially as a pipe cleaner to get the check engine to come off. That was working before, but now we've got trapped vapor and can't fill the tank.

[@scuba422123]

cool fish tank setup! ive seen codes set also and spider webs.... hope all is well mike!

[@GoTechTraining]

Hey Scuba, thanks for watching! Ah yes, spider webs are good for blockages in EVAP and HVAC case drains! Mike Becker, Senior Instructor

[@djosbun]

Excellent video, Mike! I was surprised to see an actual filter inside of that evap box. Are there any other manufacturers that have a replaceable filter setup like that, to your knowledge?

[@GoTechTraining]

Hey Dave, thanks for watching! Yes, there are for sure. I don't know off the top of my head all of them, but Hyundai/Kia do for sure. They actually had a tsb for replacement on some models.

[@rong9758]

GM

[@302Camaro]

Thanks for the well done video. I recently had the same issue, replaced the charcoal cannister but the problem remained. I then had my mechanic replace that other filter and that did the job. Chevy Tahoe.

[@charley2126]

@@302CamaroDid they say what section was the issue? Same problem here

[@cpaoutdoors9926]

There is a anti siphon/roller over check valve on dodge vehicles that stick in the closed position where the fill neck connects to the tank

[@tbone2859]

Love the visual demonstration. Great job. Thank you!

[@GoTechTraining]

Thanks Tbone! ~Mike

[@richardcranium5839]

thanx mike. that's a lot of dust for a tank vent system

[@GoTechTraining]

Hey Richard, thanks for watching! Yeh it was for sure! They used to drive on a lot of dirt roads. Mike Becker, Senior Instructor

[@jeffhornish4645]

Mike, awesome video! It’s probably the 20-25th one I’ve watched and it’s the best one I’ve come across. I’m working on a 2004 dodge 1500 slt with a 5.7 Hemi. I was pretty green with evap before but have been forcing myself to learn. I definitely had a stage 5, maybe more since I was getting gas spilling out. I unhooked the purge valve lines and the problem went away. I was feeling good thinking that I found the problem. But it came back recently. I took the cannister off prior and blew through all openings and didn’t notice any restrictions. I’m now thinking it’s the vent. Your video has been very helpful and I will probably watch it many times.

[@GoTechTraining]

Hey Jeff, Thanks for the kind words and glad you enjoyed the video! I hope you get your truck fixed!, let us know how it turns out! ~Ryan Wilsing

[@mark.r8900]

Hi, I am having the same problem. Have you got your s fixed? Thanks

[@williamwilkesjr.9494]

Great explanation of how the evap system works Mike, thanks !

[@GoTechTraining]

Hey William, thanks for watching! Mike Becker, Senior Instructor

[@spelunkerd]

Gee, you put a lot of work into the demo. Thanks!

[@GoTechTraining]

Hey Spelunkerd, thanks for watching! I've had the tank for a while now. It's been featured in quite a few videos :) Mike Becker, Senior Instructor

[@kenlow4028]

So good for the technical details thanks you

[@GoTechTraining]

Hey Ken, thanks for watching! Mike Becker, Senior Instructor

[@ifell3]

Great visual explanation

[@GoTechTraining]

Hey Ifell3, thanks for watching! Mike Becker, Senior Instructor

[@jamestrombley386]

I occasionally have a similar problem with my motor home thanks for the information.

[@GoTechTraining]

Thanks for watching James! Good luck fixing up the motorhome! Mike Becker, Senior Instructor

[@harvestblades]

Try dealing with this in -20f with windchill and a monster '05 Yukon! I guess my wife doesn't mind as I always make sure she has gas to shuttle the kiddos around. Pretty common issue on that era of GM trucks.

[@GoTechTraining]

Hey Larry, for sure it was! That's why they had the remote mount filter kit made for those trucks. The vent was soooo common to plug up. ~Mike

[@papasitoOC]

My dad’s car has this stage 5 clicker issue too so I appreciate this video. His is an 05 Mustang. He was told a spider might have got down the fuel neck and you mentioned spider webs could be a culprit blocking the air to fuel ratio when at the pump, so my question is how do spiders get in there? I’m guessing they got on the gas pump nossel and then forced into the fuel neck of the car 🤷🏻‍♂️

[@GoTechTraining]

Hello, That's a great question! Most of the spider webs I've seen blocking systems have been at the filter side of the system. So they didn't have to crawl to far to cause an issue. If there was a restriction at the fuel neck that's a bit tougher. But they are pretty sneaky! ~Ryan

[@coltguy32]

My 2021 Jeep Grand Cherokee has this type of issue. I simply turn the nozzle 360 degrees and it fills no problem at all. I found this trick in reading various Jeep forums online.

[@GoTechTraining]

That's interesting David! Wonder if they have a factory venting issue? ~Mike

[@georgegravette1132]

I've had to do this for my 05 Mustang, but I only have to rotate the bottom of the pump nozzle counterclockwise to the 2 or 3 o'clock position. Yes, it does work.

[@kyleadams6298]

Mike….great explanation….my problem on my 2004 gmc pickup is just the opposite…gas nozzle won’t shut off no matter what station i go to…any trouble shooting tips u cd gv me would b greatly appreciated

[@GoTechTraining]

Hey Kyle, that tells me that the filler necks not building pressure like it should be when the tank is full. Is the filler neck in good shape, not rusted out? Mike Becker, Senior Instructor

[@kyleadams6298]

@@GoTechTraining yes filler tube is gd…had tank replaced last year..but problem followed the tank …cd their b any parts missing

[@kyleadams6298]

This issue happened to previous owner after he had tank replaced…no one cd figure it out…now i hv had the truck for 4yrs and also had to hv the tank replaced due to an auto body welding accident…problem followed tank replacement.

[@GoTechTraining]

Could it be that when the tank was installed a hose got pinched? Or maybe the wrong tank was installed? Mike Becker, Senior Instructor

[@robertmccully2792]

I blew air into my tank and fixed it 6 months ago. I figured it might clear the filter.. it worked. It also caused the tank to read full for some reason. The air fixed that also?

[@mark.r8900]

Great video. My 2500 savana is having same issue. When trying to fill gas , the gas station pump handle doesn't click but gas just spills out from filler neck after only a few dollars. I've checked all items by watching your video. All looks good. Also the car's gas gauge always shows full even when empty. Can a bad sending unit be the culprit? Any help would be greatly appreciated. Thank you.

[@gregorymarshall1046]

96 ram 1500 doing the same thing. I’m thinking replacing the canister cause I’ve put a new purge selinoid on and it’s still not removing air from the gas tank

[@GoTechTraining]

Hi Gregory, A quick test you could do, is disconnect the breather hose from the tank to canister and see if you can fill it with gas. If you can, it has to be a restricted EVAP canister or something down the line of the canister, like a LDP or it's filter. Thanks for watching! ~Ryan Wilsing

[@gregorymarshall1046]

Done that. Removed the filler neck and rigged up something to put gas directly into the tank and gas came out the vent side

[@GoTechTraining]

I would suspect the fuel tank may have a roll over valve stuck. ~Ryan Wilsing

[@HikerBiker]

Two questions: First, enhanced EVAP has been out for years so why recently having problems, or has this problem been around for awhile? Second, can this cause the gas pump nozzle to NOT shut off when fuel tank is full. I have a 2019 Transit 250 with under 10K miles and when I was topping off the tank after the nozzle shut off the nozzle did not shut off the second time but let gas back flow out the filler.

[@GoTechTraining]

Hey Hiker Biker, thanks for watching! This has been a an issue for a while now. It mostly depends on the design of the system and it's ability to overcome pressure issues in the tank. As for the nozzle not clicking after it's clicked once, that's likely because pressure didn't build up in the already full filler neck, leading to gas spilling out. If the nozzle clicks off and you don't have a restriction, the tank is full. Don't top off as it can cause issues in the system. Mike Becker, Senior Instructor

[@exmotorsports]

Ha...What kind of smoke are you forcing on them duckies.? Lol Whatever it is...You've got one duck upside down now. 🤣🐤 Great to see another video from Master Mike. Awesome Buddy.! 😎👍

[@GoTechTraining]

Those poor duckies are dead man...have been for a while😂 Hope all is well bud :) Mike Becker, Senior Instructor

[@paulfiebke3909]

Thank you for showing us that, where get parts at? Keep up the good work

[@salvadorgutierrezr5914]

Thanks for teaching mike and God bless you 🙏

[@GoTechTraining]

Thanks for watching Salvador! Mike Becker, Senior Instructor

[@wyattoneable]

Great editing, great visuals and even Eric says your the best at explaining an EVAP system...any system for that matter!

[@GoTechTraining]

Hey Wyatt, thanks man! I don't know about the best...just some guy who likes to talk about cars I guess...I do a lot on EVAP though...not sure how that worked out lol Mike Becker, Senior Instructor

[@nicknicu1787]

Mike,please tell us where you fill up your tank because we would love to take advantage of that discount! 😅 Thanks for the video Mike! 👍

[@GoTechTraining]

Hey Nick, thanks for watching! Hahahahaha this vid was shot back in February, before the gas price hike. Mike Becker, Senior Instructor

[@hamod4066]

Bro u deserve more subs

[@GoTechTraining]

Thanks Hamod! I hope you are one now :) ~Mike

[@bobwhite1734]

Excellent videos. Do you have any occasions to work on ram diesel 6.7L MAP, MAF sensors? I am looking forward to more great diagnosis.

[@luismejia4674]

Pretty good video, lots of learning here thanks.

[@meorge9359]

Good video mike! I got a Subaru on my lift for the same issue and a P1449. I can suck through the port on the LDP but I can’t blow through it. (Port that goes to the filter box). I disconnected the port on the LDP coming from the canister to rule it out. And still can’t blow through the LDP. Safe to say the LDP has failed ?

[@GoTechTraining]

Hey George, thanks for watching! Hmm usually the LDPs have an over pressure valve. If you can't blow through it, maybe that valve is stuck? What year/model/engine Subbie? I can take a look at the system. Mike Becker, Senior Instructor

[@meorge9359]

@@GoTechTraining it’s a 2014 crosstrek . I already cleaned out the filter and vent hoses but that didn’t do the trick

[@bernardaflores1720]

@@meorge9359 probably replace the filter too!

[@GoTechTraining]

From what i'm seeing there's a "drain separator" attached to the LDP. Not sure what it is and the info is really vague, but make sure that's not plugged up. If you can detatch the LDP from the canister and go to the station to refuel and your issues solved, then i'd be ok with the LDP getting replaced. Mike Becker, Senior Instructor

[@markharper2430]

I think this is whats causing our sudden issue on ours. Do you have a link to the filter for the same year? thanks for the video

[@tiffanybodie830]

Great job explaining everything

[@juanlanda2441]

I feel that if your pump shuts off at $28 .60 and you are trying to top it off to an even $30, all of the excess fuel could work it's way into the vent lines. So once it stops, that's it don't force more fuel into it.

[@GoTechTraining]

It can also work its way into the canister as well. When it shuts off, it's done, don't try filling more...unless theres an issue like this car had ~mike

[@mrkttrdr2919]

Very clear explanation as are all ur vids, thanks for posting, be well

[@GoTechTraining]

Hey Mrkt trdr, thanks for watching! Mike Becker, Senior Instructor

[@EmeraldOtringal]

I don't get one critical aspect: Is the charcoal filter meant to filter the fresh air coming IN the vapor canister from the outside, or is it meant to filter the gas vapors from inside the canister before releasing them OUT into the atmosphere? As you can see, I'm still not sure if the charcoal filter + vent valve are a 2-way street between the vapor canister and outside air or just a 1-way street (and if so, in which direction)? Thank you so much!

[@geo641]

Great video, thanks for that, super helpful

[@lalakarma6956]

My 2015 mini Cooper is doing this and I'm figuring it's the EVAP thing but I don't know where or who can fix it without it costing an arm and leg. Is there anything I can put in the tank or it has to be token apart like you did

[@GoTechTraining]

Hello Lala, Unfortunately there is no additive that will fix this issue, the restriction or vent issue will need to be fixed. Thanks for reaching out! ~Ryan

[@gustavoheim62]

Need help! my S10 through the center hose on the fuel tank dumps liquid fuel out the vent on the charcoal canister! it is supposed to be a vapor vent I think. I just replaced the fuel pump in this truck. I have the bed off the truck and it is easy to fix whatever is wrong that is causing the flow to dump from the tank but I dont have any idea why it is happening. I took the foam filter out and cleaned it and also the rubber hose from the charcoal filter to the vent .they both were filthy with road dust but DRY. IT IS A LITTLE PLASTIC box with a foam filter insidet hat comes from the charcoal filter.

[@GoTechTraining]

Hey Gustavo, something is bulding pressure inside the tank. Look for pinched hoses somewhere. ~Mike

[@ncflyer06]

Can you elaborate on the benefits to adding rubber duckies to your fuel tank?..asking for a friend..Haha! Great video, as always!

[@GoTechTraining]

Hey Ryan, thanks for watching! I like to think of my duckies like the birds in the mineshafts. Didn't they use them to ensure the air is ok in the mineshaft, right? My upside duckies have confirmed I wouldn't want to live inside that gas tank hhahah! Mike Becker, Senior Instructor

[@trevormagee-xm5bz]

My crv does this now sometimes but if I just hold the gas pump at 90 degrees from how you'd normally put it in...it doesn't do any clicking.

[@mauriciosantos9163]

Hi! I have a 2005 Dodge Durango which like a lot of owners of the same vehicle, spills fuel when filling. I noticed the vent pipe to have like a trap before exiting on the filling neck. Do you think that's the flaw on design for this vehicle? I was thinking of replacing it with another brand filler neck; what do you think? Thanks!

[@GoTechTraining]

Hey Mauricio, thanks for watching! The intended vent path of the system during refueling is through the NVLD assembly. It has a check valve that opens at 0.01 PSI to allow the fuel tank to breathe through the canister through the NVLD and out to atmosphere when refueling. Check out the hoses and path from the canister to the NVLD and through the NVLD filter assembly, if there is one. ~Mike

[@StephieGilley]

Great video but what is this called? I mean what do you call this repair job and how much does it cost?

[@GoTechTraining]

Hey Starflower, On this particular vehicle the ESIM filter was replaced because it was full of dirt and plugged. ~Ryan

[@sheerwillsurvival2064]

Excellent demonstration and video 👊🏻👍🏻

[@GoTechTraining]

Thanks for watching! ~Mike

[@davido12able]

On a Toyota vehicle with roll over Valve would it have the same concern of the pump clicking off

[@GoTechTraining]

Hey Kzilla12, most cars have rollover valves. Toyota uses vacuum pump systems on a bunch of their vehicles. A restriction in that outlet path would cause the same issue! Mike Becker, Senior Instructor

[@capitankak]

Having this issue with a 5th gen 2019 Ram 1500. Not sure what to check first. Any ideas are appreciated.

[@GoTechTraining]

Hello, Even though your vehicle is different, the EVAP system type is the same, the lay out is just a bit different. If you can access the canister, ESIM and Filter which are located on the fuel tank behind a metal shield. Start by check the Filter and ESIM for restrictions. If none are found, I would remove the canister and check for is being plugged or restricted. I hope this helps! Thanks for reaching out! ~Ryan Wilsing

[@ultimaider6138]

Great video and everything makes since. However I have one question. My mechanic who has done great work for me in the past ran some tests and couldn’t find an issue with the EVAP system. They are telling me the issue is with the fuel pump. I can’t find anything that supports that diagnosis. Do you feel a fuel pump can cause a fuel fill issue as such?

[@juanlanda2441]

Why I love older cars .they don't have sealed system . So basically the vent valve could be stuck, or the charcoal from the canister could be plugging the vent hose. Usually these components are above the fuel tank and frame, very difficult to access

[@GoTechTraining]

Yes Juan, in a normal EVAP system that's the case. Chrysler uses and ESIM system on here without a traditional vent. Most of the evap components on this one are located in the wheel well. ~Mike

[@emeth1798]

I have a similar problem but it comes and goes. When the check engine light comes on I can’t put gas in my 2003 SLS GMC. I am replacing the fuel pump tomorrow so need to look at this charcoal exchange filter systems. Could it be the solenoid?

[@wannabecarguy]

My vehicle does this at some gas stations but not all. But if I put something to keep the filler from making a seal, I don't get a stage 5 clicker.

[@paulsmith9341]

Hi, Mike! My 06 V6 Jeep Liberty has to problem accepting fuel but it is late in auto shutoff and burps up a tablespoon or two of fuel. I mitigate this manually guessing it's close to full and slowing the flow. I don't have a smoke machine but could this be the same solution? Take the canister out and and clean it? It's got 175k miles.

[@GoTechTraining]

Hey Paul, thanks for watching dude! It sounds like the system is building up pressure and burping back. I'd start by making sure there's good flow through the system, just like we did here. Mike Becker, Senior Instructor

[@roymorgan5498]

Thanks. Great Video ✌️

[@IsraelRubioR]

Hi I have the same issue, but it show check engine line on, do you think this can cause error code 455 456 457 ? By any chance do you have a video explaining how to test the charcoal canister & selenoide ? Thank you

[@robertmccully2792]

You could also pull the air vent hose loose at gas station. Gas goes in,, filter.

[@cris2144]

Hi mike I have that same problem with my 2010 Tahoe and I replaced both my charcoal canister and canister vent valve solenoid and it didn’t fix the issue what could be the problem?

[@GoTechTraining]

Hey Cris214, whats going on with it? It's a hard to fill issue? It's possible there could be a stuck relief valve on the tank or a restriction of the filler neck vent. ~Mike

[@cris2144]

@@GoTechTraining yes can’t fuel up correctly the pump stops itself every few seconds and I’ve seen many videos all of them explained it could be the charcoal canister or the evap solenoid and I replaced both and the problem didn’t get fixed

[@GoTechTraining]

Did the filter element that goes after the vent solenoid get replaced? ~Mike

[@robertcasey3528]

I've had this problem on my 2001 Dodge ram. I tried pouring in by hand but then it tends to burp and come back out so it has to be poured in very very slowly. Takes me almost a half an hour to put in 10 gallons of gas

[@georgegravette1132]

I've had this problem with my 05 Mustang, but I've managed to slow-fill the tank at the pump. I reverse my hand position on the pump nozzle, so that my pinkie finger is on the very tip of the nozzle lever. This gives me just the right amount of leverage to trickle in some gas without causing the pump to shut off. Fortunately, I only need to do this for a half minute or so, and then the pump works normally. Don't know why this is, but it works for my car.

[@VorpalGun]

Huh, I have this problem on *some* pumps on my diesel car. I assume diesels also have this system? Why would it only happen on some pumps though? Just an early/borderline case?

[@GoTechTraining]

Hey VorpalGun, diesel is a whole other animal. I don't want to put my foot in my mouth but I believe there are different flow rate diesel pumps at different stations. Some smaller light duty cars can't accept the high flow rate of the pump. They weren't designed to handle that much incoming fuel. Mike Becker, Senior Instructor

[@VorpalGun]

@@GoTechTraining Thanks for the quick and informative answer! I have a Subaru Outback 2011 specifically (we got diesel variants of those here in EU). One pump at a gas station will work while another (identical looking) at the same station won't. Super confusing. This has happened at multiple different stations and different franchises of gas stations too. As for flow rates there is always a button to enable high flow, I have not used that. I have not seen any other signage indicating different pump rates. Sometimes there is a separate truck pump that is not under the main roof (to allow full size lorries to fit). Those have a wider diameter on the pipe that goes into the car, and won't even fit on a normal car. From some googling it seems that diesel evaporates much more slowly and thus the system is different, apparently on some older cars at least they just have vent line(s) and roll over valve(s). I have not found the details for my car though. Presumably it must still have *something* to let the air out while refuelling and let air back in as fuel is used up. I guess the chance of such a setup getting plugged in some way is much smaller, but probably non-zero still.

[@mrweisu]

Hi Mike, great video! My 2007 MDX is a stage 3 clicker. It can accept gas for the most part. But the pump always shutoff 1-2 gallons short. Previously the fuel gauge can rise slightly above full mark. Now it points to the full mark exactly. What might be the cause of it? Thanks.

[@GoTechTraining]

Hey Wei Su, thanks for watching! That's interesting. How do you know its short? The tank will usually hold at least a gallon even if it reads empty. Mike Becker, Senior Instructor

[@mrweisu]

@@GoTechTraining Previously the pointer of the fuel gauge can go beyond 'full mark' a lilttle when it is really full. Now the pointer will point at 'full mark' exactly. So I know it is 1-2 gallons short. Also previously the fuel gauge will stay above or at 'full' for quite a while after a fuel-up. Now it starts dropping right after I leave gas station. This is quite annoying.

[@GoTechTraining]

I wonder if maybe the fuel level sensor in the tank is starting to go bad? Mike Becker, Senior Instructor

[@donniestrybos4047]

Great video. I appreciate the details

[@vacatedbroom6237]

The auto tech industry just wouldn't be any fun without emissions systems

[@GoTechTraining]

Ain't that the truth!? Thanks for watching! Mike Becker, Senior Instructor

[@oilrag22]

Great informative video!!

[@GoTechTraining]

Thanks Jan! Hope all is well with you :) Mike Becker, Senior Instructor

[@oilrag22]

@@GoTechTraining Hi Michael, all well here and with my friend in Texas!! Love the bite size information. Been a bit out of the loop, but will check in more. Wishing you and yours a blessed day.

[@GoTechTraining]

That's great to hear! :) Mike Becker, Senior Instructor

[@carsandhealthtoddrosenzwei2661]

On my 02 suburban, I have the "can't fill up my tank" issue and have replaced the gas cap, vaoor canister, purge solenoid, and vent valve. I STILL HAVE the same issue. No change. And tips?

[@GoTechTraining]

I would start checking the hoses for any restrictions, if that does not solve your issue there may be a stuck valve in your fuel tank. ~Ryan

[@carsandhealthtoddrosenzwei2661]

@@GoTechTraining I blew out all hoses when I dropped the tank to check them all. Thanks.

[@carsandhealthtoddrosenzwei2661]

How do I test the tank for a stuck valve? It was working since I last wrote, and now, all of a sudden, I have the issue again. I had to use two 5 gallon jugs to fill up the tank a little bit, just so I could drive it.😢

[@carsandhealthtoddrosenzwei2661]

@GoTechTraining. Checked all hoses for restrictions and didn't find any. What I did find, is when I disconnected the vent hose from the tank (that connects to the filler neck), and shot some bursts of compressed air into, which actually inflated the fuel tank. When I stopped the compressed air, the air rushed back out of the vent hose I blew into. Is that normal ?

[@larrylazure4288]

I WISH YOU WOULD DO A RAM 1500 5.7 FUEL EVAP SYSTEM. MY 2011 IS DOING IT AND 4 YEARS AGO COST ME 1800.00, TANK AND FUEL FILL TUBECWAS REPLACED

[@allansiegle861]

Hey brother Thank you for all your hard work!! I’m wondering if you could give me hand? 2013 fusion 1.6 code P0144c n P0455. I’ve replace the canister purge and I still have the codes pop up. No problems fueling and starting and running. I’m at super lost. I don’t what else it could be??! Thank you again for you videos bro!!

[@volfan2524]

Could this be the case if it’s intermittent with no check engine light?

[@GoTechTraining]

Hey Volfan, it could be. Because of the design of this system it may not set a check engine light for a restriction unless it's really really bad. ~Mike

[@shaidparedes5043]

Dows this turn on the engine check light, this happened to mine and today I turned it on the light was on

[@GoTechTraining]

Hello, It can turn on the check engine light, if it affects the EVAP system and its ability to vent. But in this case the check engine light was not on. Thanks for reaching out! ~Ryan

[@pcustomspl]

Can you tell me where this module is in 2016 camaro ss? I have the same problem - stage 5 clicker ...

[@James-fs4rn]

👍 your videos are the best! Thanks for sharing

[@neverstoplearning382]

Another good one. Regards sir.

[@GoTechTraining]

Thank you very much! Mike Becker, Senior Instructor

[@robertkwasnik7735]

Have a 2018 ram 1500 5.7 keeps clicking off. I replaced the filter and still keeps clicking off

[@GoTechTraining]

Hi Robert, Some of those Ram trucks had fuel tank issues. I would Remove the hose from the tank to the charcoal canister and remove the recirculation tube from the filler neck to the top of the tank. Try to fill the system, if the tank will still not accept fuel, the fuel tank may be the issue. If it does accept fuel, check for a restriction in the recirculation tube, charcoal canister and ESIM. ~Ryan Wilsing

[@Kris-82]

Hey, got question. Is the clogged filter can cause problem with starting engine when it's half full?

[@raffaelesilletti156]

My Mazda 6 with full thank after 5/10 minutes of filling tank it leaks. Can it be the purge valve or the canister?

[@shariff4473]

Amazing video!

[@alaautotonics4403]

Thank you so much great job bro

[@GoTechTraining]

Thanks for watching Ala AutoTonics! Mike Becker, Senior Instructor

[@satanscourt]

Where are you guys located? I need my car checked out and fixed for this same issue

[@wingnutbren]

That really helped, thanks, man.

[@GoTechTraining]

Glad it helped! Thanks for watching! Ryan Wilsing

[@EYESandHEART]

I've had this problem for about a year now. First it started that the car wouldn't take gas and I'd have to spend five minutes filling it up. Now its worse, same initial problem, but, when it gets below a quarter of a tank, the engine starts running really rough at idle and acceleration from stop and if I don't relieve the pressure and put more gas in the car, I'll foul a plug and eventually a coil. So..... Since I'm living in poverty and food is my priority, not fixing my car. (Unfortunately I live in my car) I found that if I keep the engine running when I'm pumping gas in the car, then leave my gas cap off and drive it for about 5 or 10 minutes. That helps. I then put the cap back on and drive normally until im at 1/4 tank again and then i repeat what i just said. Do you have any suggestions for folks who cant afford mechanic work with this issue? 😓🤷. Thanks. Sorry to bother you.

[@nocaption5738]

Very helpful brother

[@GoTechTraining]

Glad it helped Thanks for watching! Ryan Wilsing, Technical Instructor

[@ajf4693]

What if the it doesn’t click off when it’s full and keeps going. Can’t find info on that matter.

[@gb5796]

Is it dangerous to drive the vehicle with this problem? I still fill up my tank even though the pump stops multiple times, and I have a p0446 code. 04 Tahoe

[@haywardsautomotive6156]

Nice video Mike

[@GoTechTraining]

Thanks Bob! Hope you're feeling well :) Mike Becker, Senior Instructor

[@haywardsautomotive6156]

@@GoTechTraining Fighting this roller coaster ride but I'!ll fight thru this!

[@GoTechTraining]

Keep up that good fight dude! Mike Becker, Senior Instructor

[@daviddowns7552]

the fuel pressure sensor can cause issues also ive read.?

[@JoshStreetDesign]

I laughed out loud when he blew into it. Bro, not a great idea, hahaha

[@lawnside82]

What kinda smoke machine is that? I need one..

[@GoTechTraining]

It's an amazing tool! SmokePro Air Complete from Redline. Built in compressor rocks man! Mike Becker, Senior Instructor

[@lawnside82]

@@GoTechTraining nice!!! I have a mean vacuum leak in my 02 e350. .i think its the intake...

[@dwaynes5983]

I disconnect mine for testing. Ordered a new one from Amazon

[@GoTechTraining]

Hey Dwayne, sure, disconnecting can definitely be a good test. Thanks for watching! Mike Becker, Senior Instructor

[@hanimohammed9751]

really helpful, thank you!!!

[@GoTechTraining]

Awesome, thanks Hani! ~Mike

[@benitososa2674]

I have a question for you, I got a 2016 audi a3 and have the same problem but the canister is full of gas , what causes this ? Can you help me out?

[@ceeweedsl]

I have seen this one with my VW. Basic problem is VW has the worst evap system. Cause is over-filling. Not sure yet how to fix, but replace cannister and don't overfill may do you right.

[@therealgalaxy009]

what would cause fuel to be sent to the charcoal canister?

[@audi247]

Wonderful video.

[@cesarbeg]

If spits fuel when fullthen is the same problem?

[@EscapeRouteMedia]

Would this affect fuel consumption?

[@GoTechTraining]

No, not that I can think of. Thanks for watching! ~Mike