GP110 2" carbon frame for top mounted battery (FullSpeed Leader 120 conversion) - BEST FOR LESS

[@JohnFSmitheugene]

Nice build and nice flying. It looks like it tracks really well and handles very smoothly. Thanks for the video

[@muteFPV]

You're welcome! The frame may be smooth, the pilot wasn't :P :P :P

[@MCsCreations]

Awesome build, dude!!! Really well done!!! 😃 Great flying!!!

[@muteFPV]

Thanks mate :)

[@nikotttin]

Great vid! I have practically the same setup but on a 90mm frame. It’s so small... I’m that close to transplant it to this GP110 frame. Thanks for the review!

[@muteFPV]

Damn, 90mm sounds very cramped for a top-mount layout! Does it fit a micro camera or are you using an AiO? Which frame is it?

[@nikotttin]

Here: m.banggood.com/90L-90mm-Brushless-Micro-FPV-Racing-Frame-Carbon-Fiber-14g-p-1135513.html?rmmds=search

[@nikotttin]

I found a seat on thingiverse... and use a foxeer predator micro. No AIO. I also had to buy taller standoffs... The 2040 come really close though. Battery is indeed top mounted.

[@muteFPV]

Nice, thanks! Frame looks great for the size

[@FPVMgunit13]

That's awesome... nice ...I like that, but I dont have leader 120... but it's a nice setup...I like it better for sure

[@muteFPV]

You don't need a Leader 120, you can transplant any 2" micro to this frame (or build from scratch) :D I used the Leader parts for convenience, to do a quick swap.

[@hawkeye1131]

Do you intend to make more diy quad builds?

[@muteFPV]

Definitely, I am already preparing for many new builds and detailed build logs ;)

[@hawkeye1131]

Awsome your builds are the best

[@muteFPV]

I have been meaning to do new ones for a long time and I finally have the time required to do so :D I can't wait!

[@hawkeye1131]

Nor can i

[@muteFPV]

:) :) :)

[@gavachkin]

The frame is good, but it does not accommodate a three-level flytower. Plus, you will not install propellers larger than 2.4inch, although the frame size allows, it was necessary to slightly change the angle of the rays for 2.5 propellers. By this, I drew attention to the ZH-125, here it is exactly enough space for all the electronics.

[@muteFPV]

There is also a 120mm version of this frame, which will fit 2.5" props better. It can fit a 3-level stack but it depends on the height of the nylon standoffs and what the top board is (if it is a VTx with a screen, it adds a lot more height and will not fit). I wish the ZH-125 frame had shorter standoffs (but still fit micro cameras). The double 20x20 mounting positions is great but it leaves a ton of empty space inside, I would prefer having the battery mounted lower. Or maybe think of a way to mount the battery under the top plate?..... hm.... food for thought ;)

[@VincentFischer]

This happens when you wash your ZMR250 at a too high temperature. You're a real fan of that VeeRace now I see. Got one on order too for my trashcan (No I'm not throwing it away).

[@muteFPV]

hahahaha yeah I should have read the label with the washing instructions :D The VeeRace antennas crash very well ;) I had them for a while but didn't have the chance to use them until recently. Their lengths fit the Tinyhawk and the GP110 perfectly.

[@VincentFischer]

@@muteFPV Hope my trashcan looks as unholy as your hawk. Btw did you convert the Leader120 out in the field or did you just changed your craftname midflight? ;)

[@muteFPV]

I forgot to change the craft name the first time I flew it with the new frame:)

[@VincentFischer]

@@muteFPV No full throttle test rippage against the living room ceiling then? Probably a smart choice

[@muteFPV]

Sorry, didn't get that one :) What do you mean?

[@ayubhananyanottama5424]

Can u share the pid, rates, and filter tuning?

[@muteFPV]

Stock betaflight tune. Rates are a personal thing you will need to find what suits you.

[@rawpicsfpv3516]

Is there a 2.5" Version as Well? Currently i have the HGLRC Hornet frame. How much of a diffrence is the top mounting in terms of flight characteristics? Thx!

[@muteFPV]

The 120mm version should fit 2.5" props, I added it in the description. I think that for this small size, ideally, I would prefer the standoffs to be shorter, to bring the battery weight closer to the center. This probably means losing the carbon side plates, which I am sure add to the rigidity of the frame. Compared to how it flew stock, in the bottom battery mounted Leader120 frame, I think I like it more now. I added more weight when I replaced the AiO with a separate camera and VTx so I cannot compare the two directly.

[@rawpicsfpv3516]

@@muteFPV super, thanks! I think i'll give it a try;)

[@muteFPV]

The 110mm version I bought has been great so far, I hope the 120mm is the same. Let me know your feedback if you get one!

[@allentituspaz3241]

Do you have gp120mm frame? And are you using 2s 450mah?

[@muteFPV]

Hey! I haven't tried the 120 version. I prefer 550mAh for this setup on 2S and 450mAh for 3S.

[@hawkeye1131]

Nice quad!

[@muteFPV]

Thanks!

[@rolandburrows4859]

Pids?

[@muteFPV]

I think it is the stock Leader 120 tune, I don't remember changing anything (and I suck at tuning :P)

[@kokoblokoFPV]

first? best ending ever! stay away from my table

[@muteFPV]

nnnnnnno! I will land on it, on your Tx or on your backpack.

[@DODG-Hudsan]

Здравствуйте :) У вас очень классные видео 👍 И очень супер работы . Вы можете прокачать , затюнинговать , поставить FPV на этот дрон helifar H803 www.gearbest.com/r-c-helicopters/pp_009569349205.html

[@muteFPV]

I hope google translate did its job right :) Thank you very much! You can add FPV using a small AiO camera with built-in video transmitter. Search for LST-S2 or CM275T, they are good options.

[@DODG-Hudsan]

muteFPV Thanks a lot for the advice :) I will try to do as you said.