How to make a Thermoacoustic Engine

2ML 5ML 10ML 20ML Glass Syringe - ali.ski/gZcfQo
Steel wool - ali.ski/Apfdee
Metal Lamp Alcohol - ali.ski/55D6cv
3rd music: Medium Rock, audionautix.com/

[@mskellyrlv]

I love the ingenuity in the use of whatever is available. Great video!

[@aneucalyptus]

CD-RW discs work so much better than just CD-R ones, literally doubles the speed of the engine. Great job!

[@giuseppe333]

Very very nice video. Before I didn't understand how does it work but now I have understood it!

[@wazza33racer]

the rubber ring to stop the piston over traveling is also the "choke" which is necessary.

[@yonosenada1773]

I’ve been wanting to build one of these. Beautiful, thank you!

[@trueidea8531]

It is fake. The total system work depends on motor by electric.

[@yourdailylife4416]

Another great and educational video.

[@erikrobillard6950]

realy the simpliest concept. great one, thanks for sharing. kinda thermoacoustic

[@gagansekhon1234]

Wowww...!! I was searching for such type engine. Nd my search has stopped on this video😊.. It's great I will try it in my home

[@williamfoster6172]

Grain, that is beautiful.

[@MrArunavadatta]

One of the best on KZbin

[@storojzzz8442]

Блин!!!!!!!!!!!!!! Мистика какая -то!!!!!)))) Несколько дней уже обдумываю - не сделать ли паровой двигатель , и для опять же будущего генератора (мысли магнитные кружатся )))!!!) и даже для чего нибудь, что по по снегу двигаться будет и этот чёртов снег убирать! Само собой даже картинка подобная, на белом , "заснеженном" поле перед глазами мерещилась!!! (Мысленные эксперементы!!!) И вот тебе - на!!!))) Как говорится сон - в руку , а тут фантастика, такое совпадение - Видео - руку!)))) Не вру в натуре, немного даже в шоке!!!)) Прям какой - то знак свыше!!!))) Классный видос!!! Лайк!

[@grain8314]

Спасибо, но я не понял, какая связь с паровым двигателем. :)

[@storojzzz8442]

@@grain8314 Ну мысленная картинка была вся, почти как у вас, только скажем в пробирке вода. И клапан.))

[@freefirelovers4591]

It’s really worked. Thank you sir.🇧🇩

[@rubansinghjohn8055]

Simply superb 👍 Village Science Factory gonna make this video 👍

[@MrNeboff]

Awesome work. i just found your videos and I've learnt a lot from them . I just subbed. i can't wait to see what you will be doing next. cheers!

[@DMSTUDIOS769]

With use sir

[@armandoburuian5550]

bravo , rar de văzut așa ceva

[@luispallo1882]

Buen video felicitaciones saludos desde Ecuador 🇪🇨

[@sounder7564]

вот это уже полезно. продолжаем так же

[@marcosvaleriociencia1021]

Very, very good!!!!

[@niteshrana9338]

Very nice idea watching from India

[@villagesciencefactory7880]

Really fantastic.... I like it

[@N330AA]

These are awesome, any idea of the power density though? How big would a 1kw one be?

[@projectrc4978]

looks like it works well

[@------country-boy-------]

i love this ! maybe use stainless steel wool and add a bit of water next time!

[@sharvaparalkar]

country boy why do you add water?

[@Currychicken5]

Sharva Paralkar so one side is colder wich can make it even faster

[@davidliz315]

Excellent work

[@nashvilleoutlaw]

A truck for cutting glass tubes or bottles. Dip a sowing thread in alcohol, wrap it around where you want cut and set it in fire. Wait a few seconds then put it under cold water. It'll crack along the thread line

[@rekhajangid9451]

Really fantastic

[@Delboy666]

Excellent!

[@mdbadalmiah6808]

So beautiful meni engine thank you sir 🤝🇧🇩✔

[@buzzlightyear7706]

As always, well done my friend!

[@grain8314]

Thank you!

[@subasshrestha5806]

Nice idea

[@heavycurrent7462]

If you added a constriction between the heated chamber and the piston it will work better. The constriction itself will help with the formation of low pressure region that would pull the piston back in

[@DivinoFiatella]

6:09

[@michelangelop3923]

It's a very nice experiment I enjoyed it, please, continue making videos.

[@grain8314]

Thanks, I will try.

[@kamranhasnain5310]

@@grain8314 Sir Please suggest me any final year project. I'm student of Mechanical Engineering. From Pakistan

[@rajpootshobhit23]

Amazing 👌

[@andrewkhchan]

Cool 😎 project…. Wonder if you can use a long single glass syringe to power the thermostatic engine instead of an additional test tube at the end?? Thx

[@sorabhtayal6587]

Awesome thanks 😊

[@pcalculas]

EXCELLENT sirji

[@user-ql2gc7mi3u]

спасибо за интересные видео

[@grain8314]

И вам за просмотры и отзывы.

[@aypepa]

Красиво сделано!

[@sastrecasado]

Great job! Thank you for sharing it. Just an observation: in the materials section (0:43) you wrote "glass siringe 20 mL", but the syringe you use is a 10mL one.

[@barracuda2421]

Nice. SuperNice. It´s working!!!!!!!!

[@lez7875]

um salve do Brasil + like. máquinas como essas são incríveis. até a NASA se interessou por elas na corrida espacial usando espelhos para concentrar a radiação solar. tá uma ideia pra um vídeo: Motor Stirling solar. parabéns.

[@itsmask2843]

Can't understand

[@ManualdoMotorStirling]

Congratulations, this engine really is not easy to make it work. Leandro Wagner.

[@grain8314]

Thank! You are right, without experience it is difficult.

[@grain8314]

You have a large collection on your channel on this topic!

[@ahmdabdallah5811]

What Is Islam? Islam is not just another religion. It is the same message preached by Moses, Jesus and Abraham. Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. It reminds us that since God created us, no one should be worshipped except God alone. It also teaches that God is nothing like a human being or like anything that we can imagine. The concept of God is summarized in the Quran as: { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) Becoming a Muslim is not turning your back to Jesus. Rather it’s going back to the original teachings of Jesus and obeying him

[@littlecheek0695]

?

[@Brinta3]

ahmd abdallah Isn’t Islam that religion which instructs you to murder anyone who refuses to agree with you?

[@Edmorbus]

Thanks for sharing

[@DANBOB265]

Im amazed I will make one. Thanx

[@robertgenova7206]

did it work? cause were making project to light up an led and we saw a video in youtube that mislead us and now were going to start all over again thank you

[@andreashubner5802]

perfekt super Video Danke

[@ICXC888NIKA]

Great job!

[@multimusic8708]

You are great

[@harshdubey358]

Awesome video. Please help me out. How's the packing done. And after packing, should I take out the piston from the syringe.

[@geniustechnology3358]

Sure I will try it

[@mistarkhn8345]

very.GOOOOOOOOOOOOOOODD job

[@englishspanish183]

Yes awesome your work

[@matinsakr6548]

Very nice , very formidable work.thanks

[@baimaireaung7806]

you give me very much khow how ever! thank

[@satriorudi1979]

Wow great

[@KipIngram]

Oh, come on man - please turn the last CD upside down so that it's pretty on both sides. :-)

[@igxniisan6996]

OCD?

[@pharmix7822]

do we have to replace the metal in the test tube?

[@ongcootngoai9441]

It's a beautiful engine. I liked Stirling engine and I have made some thermoecoustic Stirling engine, but it's not as good as yours. Thanks Grain.

[@grain8314]

Yes, I also did not perfect, in this engine, it is important to thorough mechanical accuracy and rigidity. This applies especially to the flywheel, it should be done on a lathe, but my flywheel is made by hand.

[@ongcootngoai9441]

@@grain8314 Yes I know. Thanks

[@dharmeshdj5869]

how long it work.and what is damage

[@Flederratte]

nice one. I ordered some glass syringes but the first one arrived broken so I have to wait for the others to arrive.

[@grain8314]

Yes, I also got some broken ones. Some sellers do bad packaging. And not all syringes are well suited for such use as in the video, because the piston does not move very smoothly. It is necessary to polish it with graphite or with another grinding paste.

[@truly821]

Brp you deserve 5 🌟🌟 🌟 🌟 🌟

[@zebepic3563]

You are the best

[@grain8314]

Thank you!

[@masterkatyucha2817]

Amazing! Thank you for making this Awesone Tutorial. Also, i know how to make that

[@kevinkerachi3878]

I don't give a shit of what you can or cannot do. Stfu dumbass

[@EasyOne]

nice

[@pelushbala]

you can see my channel #PelushB

[@jagadishdate9806]

👌👌 Nice

[@mustafahassan3584]

What about the metal thing you attached to the back of the syringe pump,whats it called ?

[@nithinmyuvaraja3694]

Awesome

[@gntechnicalindia1796]

Nice

[@mixingmusic6553]

Sir have u removed black washer which is attached up to the piston

[@vikramvikivikram366]

nice video sir

[@petlover8939]

superb very nice

[@naveedyounas9704]

Nice and great

[@crocolat01]

Просто умница! Ай да молодец! Осталось довести до инженерного решения, до реального механизма. Пока как забава - прикольно. Надо найти сучар абрамовичей, прохоровых, грефов...

[@atmaramkudalkar5392]

Nice video.Kindly explain how it works. Thanks.

[@grain8314]

en.wikipedia.org/wiki/Thermoacoustic_heat_engine

[@kannadiga571]

I think it is best and easy way to build this From India

[@2cvaroundtheworld191]

Perfect

[@vedaanth]

Hey grain....can we use a metal piston and tube...please answer its urgent

[@ArbindKumar-xw1mg]

Very nice

[@preejigireesh9462]

Very good

[@seeni5246]

Starting of video is like ASMR

[@grain8314]

👂 🎧 👂

[@halofan4646]

Engineers ASMR

[@frankowalker4662]

Where do you get that fast adhesive glue? The one with the liquid and spray. It's not available on ebay UK!?

[@grain8314]

I do not know, I buy from us in Moldova. Their site is indicated on the bottle - www.somafix.com.tr/

[@yusufshullai2452]

super glue and activator

[@Saveindian]

Very essential

[@Dearjeetu1.13.7]

So nice

[@ozzymandius666]

The steel wool acts a heat sink?

[@gametrue2229]

Will this power a phone? Also can you scale it down a tone? Like pocket sized?

[@grain8314]

To charge the phone is not effective. I advise you a solar panel - kzbin.info/www/bejne/jYiug5Wmhd94ecU

[@shhhhh8314]

Can we use 5ml syringe? If no then what mm testube should we use to match wit the 5ml syringe

[@grain8314]

I have not experimented with different syringes and test tubes, but I think that you can use different ones. Thermoacoustic engines have a feature: less volume - higher frequency / speed, more - vice versa.

[@vishalmaurya1510]

can we use steel wire

[@ImranKhan-bg8oc]

What is the time required for provide heat?

[@alanreis4654]

Chic parabéns 💃

[@zaidalani901]

creative 👌👌

[@aslisundawelder]

Keren bos mantap

[@63arianne]

hello! where did you get the metal from 2:10? thank you!

[@grain8314]

I bent and hid the copper plate. You can use other material.

[@manishwakodikar5624]

Sahi bro

[@sp.electronic415]

nice bhai

[@mustafahassan3584]

Where can you buy heat resistant tape from?

Goood jop

[@keshavkumar6562]

Maceracı Defineci

[@GVChannel]

Nice!

[@somebody5197]

Could you please explain the theory/principle? Why do you use the steel wool? Thanks a lot

[@grain8314]

steel wool retards the movement of warm air

[@kevinkerachi3878]

@@grain8314 retard?

[@tejasthorat5632]

Where could I get the glass tube ?

[@mikaelafrias7786]

@grain, can u tell me specifically what materials did you use in the thermoacoustic engine, including the wood, those rubber things in the screws, and the measurements too of the wood and that peg that fastens the wheel? Thanks.

[@grain8314]

All this was done without drawings, approximately. I dismantled it and forgot, I'm sorry.

[@mikaelafrias7786]

But do u still remember the measurements, because I’m planning to build an engine like yours. But thanks anyways.

[@mikaelafrias7786]

I needed the measurements for wood.

[@Yung_Buffalo]

the woods are 2x4@@mikaelafrias7786

[@crisrenzo2630]

I hope i can made this to your tutorial ♥️, This is my first time to do some work in actual, Im a Mechanical Engineering Student in Philippines 🇵🇭 thanks for the knowledge

[@waffles9771]

Oi pre hahahab

[@crisrenzo2630]

@@waffles9771 yes pre hahha

[@gojaneb]

Make two ...Politition can travel 4 free on hot air they talk.....

[@john5036]

Gumana po ba yung gawa nyo? Hahaha

[@shahabvz1643]

Perfect 💞