Follow along as J.R. Granatelli explains the features and benefits of using the Granatelli Motor Sports Exhaust Cutouts. granatellimotorsports.com/sea...
Пікірлер: 57
@moparmagnum9283 жыл бұрын
I ordered mine from summit last week and received it today superfast shipping to south america . I went with the 302525 and i am very happy with the high quality parts . tomorrow i will complete the installation. Thank you Mr Granatelli !!!
@andrearon70343 жыл бұрын
I realize I am kinda off topic but does anyone know a good website to stream new series online ?
@stevengrayson92383 жыл бұрын
@Andre Aron I would suggest Flixzone. Just google for it :)
@abelkairo42803 жыл бұрын
@Steven Grayson definitely, been using FlixZone for since april myself =)
@andrearon70343 жыл бұрын
@Steven Grayson Thanks, I signed up and it seems to work =) Appreciate it!
@stevengrayson92383 жыл бұрын
@Andre Aron You are welcome =)
@MUSCLECREWDave7 жыл бұрын
Looks great!
@sethfulton70114 жыл бұрын
hi, i clicked the link in the description to order one and the link is dead apparently; it gave me a “404 - Page Not Found!” error. i found the product after navigating around the site, but wanted to give you a heads up that the link isn’t working.
@chanhyung885 жыл бұрын
I ordered a kit today. I am super excited. Your kit looks superior compared to QTP.
@chanhyung885 жыл бұрын
I just hope it ships quickly. Can't wait to put it on.
@riopedermikayla1235 жыл бұрын
Did you get it yet? How it is? Thinking on buying one just trying to compare other brands
@chanhyung885 жыл бұрын
@@riopedermikayla123 I love it. First one had a defective valve but got replacement soon. I ordered on jegs.
@riopedermikayla1235 жыл бұрын
Lee Chan Hyung thanks
@shopvvs35414 жыл бұрын
DirtBiker52 got mine around a month ago and I have to agree with Lee, I absolutely love mine
@yamahaguy17323 жыл бұрын
Do you guys not have instructions for a dual setup anywhere
@BigEightiesNewWave4 жыл бұрын
Is Vincenzo Joey's kid? He helped me out late 80s with my Camaro.
@gregl56779 ай бұрын
How long is the wiring?. My plan is to run it to the back axle of my S10 single cab short bed. Rules say I can dump at the axle and run a bullet muffler pre cutout. So the plan is to install 2 at the axle. Then I have my quiet exhaust for cruising going over axle to the tailpipes. Or do you sell extensions for the wiring. I can add to the wiring if need to just curious if I don't have to. My old qtp was so short it was under the passenger seat of my trans am and it barely made it to my left on the dash. Had so many issues with it to. Rattle and so on. Now I see why.
@josephgranatelli94189 ай бұрын
12 foot extensions. We run them on full size trucks with no issues. You should not need extension beyond what comes in the kit. This product is head and shoulder above what you were running
@DR-gg2gk4 жыл бұрын
Would you recommend this on a truck in the winter with thechemicals, sand and salt they put down?
@GranatelliMotorSports4 жыл бұрын
Yes the Granatelli System can handle all of this
@eligonzalezvaca33097 жыл бұрын
is the y cut in also stainless steel. what kind of warranty do the motors have. any other switch styles available.
@vincenzogranatelli16225 жыл бұрын
Everything is 304 stainless - That the only switch
@moparmagnum9283 жыл бұрын
Hi i installed my cutout but i need to know how to wire the toggle switch to make it work . black wire connect to chassis ground or negative battery side. Red wire connect to ignition key or fuseblock ? so i need to look for a 7.5 amp fuse in my fuseblock to connect the red wire to ? by key on does that means the ignition key ?
@69RIDING Жыл бұрын
IF YOU LOOK THERE IS A FUSE LINK INSTALLED. JUST GOT TO A PERMINAL THAT IS HOT WHEN THE IGNITION IS TURNED ON.
@moparmagnum9283 жыл бұрын
Can i open the electric cut out before i start my truck . i need to wire it to constant voltage is this correct ?
@GranatelliMotorSports3 жыл бұрын
We recommend wiring the kit to key hot so it does not put a draw on the battery of you have them on show cars if not you can go straight to the battery
@cory07025 жыл бұрын
What is the warranty on this system? Can you just purchase parts if something fails? Thanks Sid
@vincenzogranatelli16225 жыл бұрын
It should not fail. If there is an issue however, there is a ton of support parts
@whitelobo19193 жыл бұрын
Does the valve leaks when close? I bought one from eBay have long tube headers with stock exhaust and resonator and is very quiet like factory. when I installed the eBay cutout sounds great opened but when I close the valve it leaks and I can't have it quiet like I had it before. If your doesn't leak I would like to try your product.
@GranatelliMotorSports3 жыл бұрын
How close to the headers is your Y pipe
@whitelobo19193 жыл бұрын
@@GranatelliMotorSports Is about 18 inches after the collector flange.
@GranatelliMotorSports3 жыл бұрын
@@whitelobo1919 Buy Granatelli You cant go wrong
@69RIDING Жыл бұрын
Do you need to hook up both brain boxes to the fuse box? I did not and one cutout will not open. guess I will hook the other one to the fuse box and see what happens. you only said hook the other wires to one switch.
@josephgranatelli9418 Жыл бұрын
Yes. Each cutout requires it own brain box and yes they can be ganged together on 1 switch
@Ryan-rp1es Жыл бұрын
What is the length of the Y pipe?
@GranatelliMotorSports Жыл бұрын
9inches weld on 12 inches slipfit
@ssb84136 жыл бұрын
You should make smart box three way switch. Close, half open and full open.
@GranatelliMotorSports5 жыл бұрын
In progress
@joshuakim16385 жыл бұрын
@@GranatelliMotorSports how long? im in the market right now and can wait
@vincenzogranatelli16225 жыл бұрын
We could do that - However it sounds the same. Its not like half open gives you half the sound
@metroautosracing98964 жыл бұрын
what brand is exhaust electronic because I buy some do thank you very much send me the brand to order
@GranatelliMotorSports4 жыл бұрын
Granatelli everything
@kylevantassel72596 жыл бұрын
Over torquing the button . I wont soon forget that one..... The smart chip prevents it from overtorquing the button !!!
@vincenzogranatelli16225 жыл бұрын
Not overtorquing the button -over torquing the valve - but ya I caught that
@joek819813 жыл бұрын
Everything I hear about cutouts eventually comes down to 1) the heat next to the motor, or 2) carbon build up making leaks, manifesting as farty sounds. I'm leery, but it *is* one of the coolest mods you can do. And they have little 2.25 inchers that I need for under two hundred bucks. Torn.
@GranatelliMotorSports3 жыл бұрын
A lot of people try to put them right after the cats. They MUST BE 18in after promo code GMS10
@josephgranatelli9418 Жыл бұрын
@@GranatelliMotorSports Heat kills EVERYTHING. However our design is the best in the business. Also we do not have the carbon build up issues like others and we do not require constant lubing
@69RIDING Жыл бұрын
SO I TAKE IT YOU JUST CUT AND TAPE OFF THE 12V FEED WIRES THAT WOULD GO TO THE FUSE BOX THEN. YOU WOULD GET A BACK FEED.
@canoeshoe5 жыл бұрын
I wish more competitors would understand the overtorque-ing principles Granatelli has fixed.
@SIRICKO6 жыл бұрын
Why do people always install the valve on the wrong damn side lol
@oceancity57766 жыл бұрын
Why didn't you put the link to your product In the description. You've completely wasted your time with this demo. Marketing 101
@GranatelliMotorSports5 жыл бұрын
FIXED THAT PROBLEM
@vincenzogranatelli16225 жыл бұрын
Good Call -
@joshg6245 жыл бұрын
CREATE A CLEANING AND MAINTENANCE VIDEO. YOUR CUSTOMERS NEED TO KNOW HOW TO MAINTAIN YOUR PRODUCTS!
@vincenzogranatelli16225 жыл бұрын
Unlike others our systems do not require constant lubrication. There should be no need to WD40 the heck out of it like the other guys