GS Tutorials - UCM: Interconnecting UCMs Using SIP Peer Trunks

Note: Support will not be provided through the comment section of our videos. If you would like to receive support on an issue related to a GS Tutorial topic or any topic, please file a case at helpdesk.grandstream.com. If you haven't already, become a Grandstream Reseller and receive priority support with access to a live support engineer. Apply Here: partnerconnect.grandstream.co...
GS Tutorials - UCM: Interconnecting UCMs Using SIP Peer Trunks
In this episode of GS Tutorial, we show you how to interconnect two UCM6xxx series using SIP Peered Trunks.
You can find our step by step guide here:
www.grandstream.com/sites/defa...
Looking for support? Open a trouble ticket here:
helpdesk.grandstream.com
Want to become a Grandstream Reseller? Sign up here:
partnerconnect.grandstream.co...

[@mnravi55]

Thank you, its very useful

[@franksambiase]

Very Thanks

[@pengtech4606]

new subscriber ty

[@donovanpl]

With the failover trunks set to the other PBX, and vice versa, could the routing be set in an indefinite loop back and forth if both carrier SIP trunks failed?

[@KhunbishNyamsuren]

How to enable automatic synchronization status function on PBX status in dashboard. (UCM 6208 Program 1.0.19.21). a SIP account is registered but few minutes later the sip account rejected. How to resolve the issues ?

[@arlynweyn9465]

Is it possible to have 2 GVC behind VPN with 2 peered UCM? is there any other things to do to perform videocalling?

[@mohammedbalfakih7116]

We need the GWN7000 Setting for The same Connection

[@ProsperKorley]

how do you setup the extension range....must the change be done on all other settings in that space

[@abdulkarimfeiswal8573]

Should extensions also able to ping each other or only ucm?

[@lenovo8373]

Hi, how to configure the sip trunk if only SBC IP, WAN IP, and pilot number are the details provided?

[@jcnash02]

Shift command 3 on mac

[@shafimuhammed6398]

We have 3 UCMs , 2 UCMs already interconnect through Lan to Lan VPN , how to connect 3rd one

[@houssameddinekechkar7925]

thanks sir, it's very helpful ; In this video you've used the lan network , what about the ip public address, coz i dunno how to know the ip public of my ucm, i tried with domain name but it didn't work

[@jcnash02]

houssem eddin Kechkar use a VPN between your sites and then Use the lan address

[@paulorobertotomasi7856]

Hi Do the users need to dial 9 before desired number to make calls on the remote UCM? Or the 9 digit included is only an internal mechanism between the UCMs to differentiate DID and trunks?

[@paulorobertotomasi7856]

@Nathan Sharp thank you... your videos are helping me a lot 😀👍

[@arlynweyn9465]

No need depends on your route

[@prasantact8422]

I want , analoge trunk of UCM_A will land to ring group of UCM_B

[@kurntechdouglas233]

has anyone here ever hocked up a goip sim router to a ucm 6208 for some reason i cant get blue no mater what i do

[@alexlonestar3586]

what a terrible sound!!!