The Process How To You Know How Many Lines Needed For Your Logo Design

[@lemohthepoet]

I discovered this channel last week... Truly it's the best

[@zubairali6863]

you are just awesome. no one is teaching and sharing such stuff for free. thanks a lot

[@hibaimene9684]

Thank you for taking time to explain in details, I wish you the best in this life ❤

[@ridoykhan4969]

Vaiyea osham tewtereail hoisay💞💞💞💞

[@tarikislam1991]

Information video.. awesome. 🥰🔥😍

[@imr012]

wow, great video. it's really helpful for me. Thank you

[@anhlien3197]

Thank you sir! Your instruction is very clear and I can take note all the short keys in tools to use which a lot of video didn't go in details.

[@12345678912464]

Letters like T and I and J Can you explain it Its more difficult to combine with other if you can help

[@PrimeAdvisors]

It's really great tutorial which is more helpful for us. Thanks.

[@cyberkid4589]

It's feels really great to learn with you....great work Also i am looking forward to your course vids☺️

[@GraphicHunters10]

I'm working on my course video, if you watch the whole class that will uploaded, I think, you can learn more about graphic design.

[@rkmunna6057]

Thank you very much for your support and i like you onestly.

[@carlosmerac]

GREAT JOB FRIEND😃 THANKS

[@GraphicHunters10]

Thank you too

[@paulanthonyfilms4848]

Great l wanted to see the m in the middle of the circle as it carry more lines

[@HerryHariryAmin]

Thankyou for ths great tutorial

[@qveen.artece]

for a diamond/rhombus do you just turn the square 45 degrees?

[@GraphicHunters10]

Yes

[@bilalshahid4631]

Thank you so much for this video

[@makemillionsonaffiliatepro4924]

thanks for the tutorial videos so far, but my challenge now is 15:22, when resizing the circle, the circle will be adjusting to the opposite side instead of adjustusting to the center just like what you did.

[@leonegan2704]

press shift+alt

[@Farhan-jb3dj]

@@leonegan2704 thanks 😇😇

[@luckybhai2694]

The great tutorial I have ever seen in this line logo design category! Thank you so much for the tutorial. Please make another tutorial about font pairing that will on this type of design.

[@StaerkYT]

An actual tutorial compared to those "tutorial" where they just make a logo without the foundations

[@deepeshparihar7362]

Found your channel today. Subscribed and excitedfor more good videos in future.

[@Reebavibes]

thankyou sir for this its very helpful for beginerrs

[@GraphicHunters10]

Thank you ❤️

[@sarakhairy9303]

Great video💜💜💫💫

[@ujjawalsharma6825]

This is amazing 👏 😮

[@petersudhir]

Wow, it's very helpful. Cheers.👍

[@ranphilstech]

Graphic Hunters why do you use polygon to design the logo, why not rectangle

[@hamnaaq1934]

Amazing. I follow you on daily basis.your content is so amazing.would you like to learn all types of logo..all they make on grid system? like mascot etc..plz answer me sir

[@GraphicHunters10]

Thanks and sure

[@dreamnawaz29]

Superb

[@FatimaAli-qx2tr]

Thank you so much your videos are really creative and easy to follow

[@হুদহুদইসলামিকমিডিয়া]

thank you so much!! I really love THIS

[@Nicola_Tesla452]

How select the space between lines ???

[@emotion1407]

Great!!! It's really helpful. Thank you.

[@GraphicHunters10]

Thank You

[@dopamine-9085]

That is great 😍😍I followed you from eygpt

[@mambwechibu6899]

how are you removing the letters from the lines

[@BonfisNkunda]

can we creating lodges using shapes only

[@AbuTaher-sn2bt]

What will be the distance from line to line?

[@statistico897]

8:15 The letter M occupies a total of six lines, not 4 as you said at the beginnng of the tutorial ANYWAY hiper-usefull trip the suggestion about counting the necessary to make lmonogram logos!!!

[@GraphicHunters10]

Thank for your compliment.

[@statistico897]

@@GraphicHunters10 You are welcome!

[@lenkaaaaaq]

very helpful, but how to export it?

[@thesaintmakalashi5083]

Thanks 👍

[@tapasbarman6368]

informative video. Thanks

[@shammakhan8598]

Thanks trying to learn this grid system it's really helpful Keep up the great work 👍🏻

[@antimocacciapuoti8244]

Thanks

[@salmanshishir8897]

You are amazing as always

[@deontestreeter8337]

Ungrouping isn’t working. My letters keep coming off in pieces. What do you suggest?

[@IsmailAllin1]

it's very helpful video

[@thepowerofstory04]

thanks bro

[@mudssirkhan3D]

Thank you so much It was very helpful

[@KBQ98]

You are my teacher, thank you😍🥰

[@GraphicHunters10]

You're welcome 😊

[@bestReviewsever2023]

😢😢😢😢Thank you very much. Can you tell us how to open a new logo file and how to save it in the end for screen and printing? This is something I did not find in any course or any channel.

[@nayem2439]

nice

[@mamadoulaminecisse4017]

Thank you so much really helpfull 👑

[@m.h.graphicdesign5161]

Very nice way you can teach Thank you

[@alannguyen257]

I’m wonder how do you drag the circle into smaller scale, what tool or method do you use?

[@sharifahamededitz]

loved it!!!

[@ahsanli0n643]

I cannot make it letter T in the middle i wanted TO make tsm logo

[@thedark02508]

How to choose shape

[@hafizosamamasood7860]

hello can you tell how how to make lines for star shape? Like I have to cut SA in star shape how can i do it

[@pappa6085]

direct selection tool would select the letters without ungrouping,,,,,, and you can remove anchor points with pen tool

[@sbkhan303]

These designs are specific to some characters only. difficult characters are K, R, B,

[@hibaimene9684]

Okay, it helps, show some appreciation !

[@dzarifimran1207]

Im using ibis paint, how do I remove the words from the grid? I don't know how to find the ungroup part

[@BeatleEd]

Ok, that's good.

[@mr.shahmeer.mr.shahmeer.648]

Thanks a lot sir but I am having difficulty writing the letter Q in this method.

[@hamnaaq1934]

Same Question

[@JibonSun-kj4os]

4 lines for 1 letter but "m" letter take 6 lines please explain it. Thank you.

[@luoyang1049]

THANKS

[@ramadanelkhemry6377]

I didn't know what kind of tool you are using. I don't have it

[@AhsanDesigns]

Nice 👍

[@FokhrulIslam-p8g]

Thank you.

[@matvargas5975]

how to move the letter from the lines?

[@brightagbenyo678]

It is a good tutorial, keep it up for the wonderful job you are doing for those who are interested in acquiring more knowledge in graphic designing. Please, can you design this logo using power point?

[@klimenoveski9657]

Good explanation. Thank you very much.

[@preston8859]

Can you do an octogon?

[@nirajsinghshorts]

can you make my logo SCS

[@DanishAli-nq2mg]

Hey Bro, In your previous video on this topic you say that take 3 lines for one letter and 1 for gap and 1 exrtra now after seeing this video I am confused🤦‍♂🤦‍♂🤦‍♂🤦‍♂

[@GraphicHunters10]

If you take 3 lines, there need an extra line, but if you take 4 lines, there is n need an extra lines.

[@DanishAli-nq2mg]

@@GraphicHunters10 Oops my mistake brother but I tried both ways to make a DG letter in that shape but I failed to make it 😟😞😖

[@ngabiranovisensio7026]

You're a real teacher

[@Ammarmuawia]

very informative tutorial but I am so much confused about the number of lines. In SKC and other Logo tutorials, you have used 3 lines per letter and no line for space but in this tutorial, you have used 4 lines per letter and 1 line per space please clear it and reply to my comment. Thanks

[@OnlineTechEarn]

which illustrator version will be perfect for 4gb laptop? please reply

[@000SilaS000]

S and c letters occupy 3 columns. The M letter occupies 5 columns. It's like saying each letter occupies 4 lines, but the last one occupies 6 or 7....

[@L3Gecko]

How did you get 4 lines in the beginning?

[@rupalislam4615]

are vai onak cestha korci kintu parci na,,,

[@sultanaakter1709]

but u told in an another video that we need 3 line for each letter

[@GraphicHunters10]

If you take three lines, there need an extra lines, but if you take four lines thete is no need extra lines.

[@sagimotola5546]

HOW MUCH PIXEL?

[@DJFEKTON]

i try metod 4+1 with MTWK letters and i don't have space for K ^^

[@SufyanTips]

❤️

[@vijayvijayakumar9389]

Hi sir how are drawing (R A M)?

[@algertp.3197]

It's wonderful and good explanation. There are also some other way of taking care of those mistace. 1. Using the direction tool very fast and easy. 2. Pen tools minus and plus 😊. Also the lines for M and other wide letters should be one extra for example 4+4+5 and +1+1 for the line betweenlettwrs always taking in consideration 3 letters.... I like a lot your videos hope it comes a lot of new one. Very clean and love the grid technic even though most of us in the beginning it looks like headache.

[@burhaniify]

My man sitting with tarzan in jungle

[@khizerkhan5827]

How to make in circles

[@ILKINMUSIC01]

Please, Can You draw my name “ILKIN” !? Please 🙏

[@harshinip9775]

WHY NOT JUST USE ENVELOPE DEFORMATION TOOL

[@zladatv]

*👍класс и привет от тренера по футболу!!!!!-!!!!!-!!!!!-!!!!!-!!!!!*

[@alideep9656]

The letter M took more than 4 lines right ?!

[@GraphicHunters10]

May takes 5 lines