Great drill mass production factory.How are drill bits produced？

Amazing drill mass prodution process. @depthinprocess
How is are drill bits produced？Let's find out! #productionprocess #processvideo #drillbit
Look at these amazing production processes from the most desirable factories and industries, check them out.
💌 Contact : [e-mail]
01:05：put the material on the punch press to break the material
01:39：Put the broken material in the roller to remove the black skin
01:56：put the material into the cutting machine to flatten drill bits
02:21：put the material into the brake heating roll forming
03:18：Put the molded material into the cutting machine again to sharpen
03:47：put into the grinder for two times of rough grinding to fine grinding
04:15：Put the ground material into the opening machine and open the angle of 118 degrees or 135 degrees according to the customer's demand
06:32：according to the customer's demand to type the specified letters
We'll do my best to make valuable videos for product manufacturing processes
🎥 Copyright (C) 2023. Depth in process. All rights reserved.

[@depthinprocess]

To learn more about the manufacturing process, welcome to subscribe to our channel！ 💌 Contact : [e-mail]

[@sumargono2114]

9

[@1992jamo]

Ah got it. The hot metal goes in, and the drillbits come out, I feel like I've learned so much.

[@user-tr2dh4xx6u]

turn on subtitles

[@marksturgis3536]

That explains some of my cheapest drill bits.

[@janami-dharmam]

And they power the 99% of drills of hobbyists all over the world.

[@someoneelse7629]

Oh, I know this brand, they come predulled from the factory, and that's good, because if you sharpen them and eventually get them to catch, they will unwind the flutes. They are made from prima Chinesium, the softest material on earth

[@guytech7310]

Carbon steel. They are made to fit customer demand. I am sure the probably also make drills out of HSS (tool steel) but they probably do a HSS run once in a while do to lack of demand.

[@tswellersalzer1850]

Chinesium LOL captured!

[@RealNotallGaming]

@@guytech7310 HSS drills are garbage X,,,D

[@andyash5675]

It's a bit of a shame that you don't get to see how the flute forging and then the tip grinding machine actually works. Obviously it's difficult because the important steps happen behind a guard. A couple of people have commented that these drills are low quality. The vid does start out that way, but the ones at the end look like much nicer ground flute drills to me. This video really needs more detail. I understand why it's not available, but it doesn't quite hit the spot for me.

[@AffordBindEquipment]

Totally agree. Was thinking the same thing.

[@MikeJones-rk1un]

They are twist drills. Flutes are formed by twisting. Not grinding.

[@andyash5675]

@@MikeJones-rk1un But as you will know if you ever grind a drill accurately on a cutter grinder, it is almost impossible to make an accurate point if the the flutes have not been ground. You can buy quality ground flute drills and plain forged ones. The forging can occur early in the production process and it is seen in this video. You can also fully grind a helical flute into a cylindrical drill rod blank. What I suggested was that you can't see if they actually show flute grinding process if it occurs on their forged drills. They do appear to show finished ground flute drills in the video, so I found it a rather frustrating presentation. I can't say that I feel you helped me with that, because many of those who expect good results from their drills used on hard materials know that they need ground flutes. It allows them to be resharpened accurately when they inevitably wear out. Lousy drills are formed by forging only. Both ground flute and forged drills are twist drills, because you twist them to make them cut.

[@MikeJones-rk1un]

@@andyash5675 That’s what I said.

[@soundspark]

@@MikeJones-rk1un You aren't going to do that with a solid carbide drill however; those things are expensive because they must be ground from a solid bar.

[@kennyparis8742]

Now I know why I'm sharpening bits after 2 holes. I'll put every bit I have in the forge and oil quench them tomorrow. They don't do anything to harden them.

[@Migman2020]

what you drill and what size and speed..

[@lolatmyage]

Instead of saying you will do something you won't, just get some better quality bits

[@guytech7310]

You can by drills using tool steels instead of carbon steel bits, but they do cost more. Look for drills using HSS or M2. M2 are tungsten-molybdenum tool steel and will last a long time. Even harder are Tungsten-carbide, but aren't suitable for some drilling & they are brittle compared to HSS/M2 tool steels.

[@winningwithoutracing7811]

Hand grinding drill bits w/o eye protection for hours on end without eye protection is insane and upsetting to watch. I guess leaving the induction heater and dropping into a bucket is sufficient heat treatment.... Odd. I guess they're just carbon steel and not hss steel so salt bath heat treatment or furnace operations followed by quenching aren't necessary. The productivity is certainly impressive.

[@depthinprocess]

Thank you for your kindness, we have the responsibility to inform the factory to pay attention to protect the health of workers in the later production.

[@mikegrok]

I think they are quenching the. At 4:35, after they sharpen them. They would be more difficult to sharpen if they hardened them first.

[@171sourav]

You Mfers want everything cheap, each day is survival anyways beach! Contact me if you want to break you bubble.

[@kennyparis8742]

@@mikegrok the only time they were brought close to a hardening temperature was when the flutes were put on the bits. They just dropped into a bin from there.

[@janagan_s]

That's why Asian made product are cheaper.😢

[@Adventures_with_Josh]

And now I know why my bits cut like shit right outta the box🤦

[@andrebartels1690]

I will treat my cheap drill bits with more respect from now on, since I know someone made them in hard work.

[@metricdeep8856]

No you won't.

[@ML-jf1xe]

Toss them , they are useless

[@RosCug]

Respect to the workers.

[@olamazur8398]

Спасибо за видео очень интересно. Всем привет из России.

[@depthinprocess]

Спасибо, что уделили нам время, и мы продолжим давать вам более интересные видео для производства😍

[@AlphatecEngineering]

Wow, nice video, love it 💚💯🔥

[@MacGyver-1]

Good thing they can make them so quickly, you need 4 just to drill one hole

[@Rubensgardens.Skogsmuseum]

One of my previous employers bought them to drill stainless. I got so pissed off i pressed the machine so hard it melted it’s way through. It also gave me a broken rib.

[@user-tr2dh4xx6u]

oil the bit while drilling @@Rubensgardens.Skogsmuseum

[@warpedbeyondhelp]

What mind-numbing work.

[@ledbelly68]

Try it sometime. You'd be surprised how quickly a day goes by if you are actually doing work instead of complaining.

[@phiksit]

Another day at ye' old drill bit factory. Somebody kill me 😵‍💫

[@bryanscott8675]

Braindead work isn't that bad if you can wear headphones and listen to music, audiobooks, or podcasts. I've had jobs like that in the past, and the mentality gets to be "I get to rock out for 10 hours, and all I have to do is press "Go" every once in a while? And I get paid to do this?" Beats customer service roles, haha

[@aalandk]

@@bryanscott8675 Braindead work that can leave you mangled or dead because of a split second of being unaware, sounds like fun

[@johnwick7175]

perfect work for these chinese slaves

[@Jeroen74]

Poor lady at 6:20... that's not a job, that's torture.

[@hztn]

- Yep, that's a reason why 10-15% of Chinese drill bits need to be resharpened from a box. Only Russian drill bits is worse: 30+% is bad sharpened, and just cannot drill. I've tested it many times before the war in 1990-th and later. Soviet drill bits where manually checked, at least - later quality level much downgraded.

[@user-en8po2sb6e]

Так вот, оказывается, где делают все эти пластилиновые свёрла, которые даже дерево не сверлят.

[@williamcunningham1448]

This would have been better if the person filming would have been able to show exactly what each step of the process is in detail and how the machines work.

[@perceive8159]

They pump them out as fast as they make toothpicks, unfortunately most of these are only high carbon steel not toolsteel and can only be hardened to a certain hardness and do not stay sharp for long especially drilling steel. People keep buying them because there inexpensive and lots available 😎

[@guytech7310]

Yup, They make them to meet consumer demand. if there was no demand for Carbon steel tools, they wouldn't make them. Cannot blame the factory for producing the products consumers want.

[@Telephonebill51]

@@guytech7310 C'mon, stupid people buy them because they don;t know they're crap.

[@feynthefallen]

So they just magically turn from iron rods into drill blanks. Wow. Seriously, content like that I can do without.

[@robertshelton3796]

I saw a guy at a hydraulic sheer, then the blanks going through an induction heater ... were we watching the same vid?

[@semperfidelis1142]

@@robertshelton3796 Ya it goes through the induction heater as a straight rod, and then those cutter at the end of the induction coils possibly put the flutes into the rod? But then they come out the other end already twisted w/ the flutes ground down.

[@DieKampfgurke94]

​@@semperfidelis1142 These are cheap shit drills, the flutes arent ground, they only get rolled by those "cutters" you mentioned. No grinding, only some sharpening later.

[@feynthefallen]

@@semperfidelis1142 Ah so they DO show the fluting at some point? Ok, so the content is there, their editing is just complete garbage. I rest my case.

[@bobturnbull18]

@@feynthefallen You're case is flawed. After being induction heated the flutes are formed by the two rotating form tools which operate on a biased axis on either side to cause the blank to rotate as it is fed between the tools. It clearly shows in the video. There is no poor editing.

[@Jungleland33]

No eye protection, no ear protection, no safety guards on rotating machinery. Now we know why stuff is so cheap from there.

[@FkCCPspiesinYT]

The worse is sending money to that country and that country try to fight US

[@user-sv7mg6qd1w]

​@@FkCCPspiesinYT It must be a great country that will fight against hegemony. In this world, only the United States bullies other countries, and other countries can only resist.

[@user-sv7mg6qd1w]

There are many poor people in the world who are willing to sacrifice their health for work efficiency. Safety tools will not save much cost. They need to use work efficiency to compete with workers in poorer countries than them. You buy their low-end products because of their low prices. But you prevent them from upgrading their industry and leaving this low-wage job, just to prevent them from taking your job.

[@depthinprocess]

We will inform the factory to pay attention to protect the health of workers in the later production, thanks!

[@rlewis1946]

@@user-sv7mg6qd1w Well said, Sir. But like others, I am sad about the hard working peoples lack of a safe place to work. There is no excuse for this company’s management to provide a safe working environment. That disregard for their workers should be criminal and that poor management should be severely punished! RL

[@Datsyukiandeke]

4:33 me at work, pretending to be working, but accomplishing nothing

[@1pcfred]

I was wondering what the point of that was.

[@jiexu134]

不错，加油，徐俏俏

[@mountainholler290]

Obviously fine quality Chinese drill bits made to zip right through the toughest fortune cookie ! 🤣🤣🤣

[@user-tr6qp3bj9v]

सुंदर देखणेपण आहे कामात .

[@Defcon666]

And off to harbor Freight they go !

[@1pcfred]

I have a set of Harbor Freight's finest black oxide coated drill bits. I paid $29.95 for a 115 piece index and I drill mild steel with them.

[@julesc8054]

It's amassing what happens when you ensure there is no descent drill sharpener for sale.

[@allahsnackbar9915]

these bits are the total shits, just do them up by hand on your bench grinder

[@lolatmyage]

You can take an angle grinder and get back to drilling in 30 seconds, try it some time

[@julesc8054]

Yip but how many people have the skill to do the effectively on a 5mm drill

[@lolatmyage]

@@julesc8054 it's easy with any size commonly used for metalwork and construction, now 0,5 mm would be a challenge

[@julesc8054]

@@lolatmyage What do you sharpen a 0.5mm drill with anyways, a mcromiter, microscope and a whetstone? 🤣

[@Anton1990.]

Огромное спасибо вам за видео.всегда хотел посмотреть как их делают

[@depthinprocess]

🥰🥰

[@Pubvoice]

Мне тоже но самое главное было скрыто от глаза, к сожалению, так как борозды нужной формы делались в средине станка и мы увидели только уже полу готовое изделие.. Да и другие процессы были показаны только вскользь.

[@TinganHamada86]

Bagus sekali video👍👍👍✍️❤

[@freakinccdevilleiv380]

Nice

[@ryanbeard1119]

Can smart machinist please take use through what all theses are, are the flutes twist formed,? And it seems there are several sizes here. Not an single whole process for one size

[@stevetomlinson7343]

You see the v shaped wheel folowing the hot blank into the rotating forming process and then the red blank gets dropped into the bucket? That is how flutes are formed

[@guytech7310]

The rotating forming process is adjusted for drill diameter. Probably by replacing the rotating form dies to match the drill size.

[@1pcfred]

I believe this is where the flutes are being formed kzbin.info/www/bejne/nKTNiGhpf7mbi5I

[@ryanbeard1119]

@@1pcfred true, only makes sense

[@user-mv6wb7fi1l]

Can I ask for the process of supplying workpieces for assembly?

[@wiser1147]

Can anyone advise when the flute machining was done on the raw material in the video?

[@richardfoulkes8436]

When they were yellow hot, the flute was forged into drill.

[@phiksit]

The section that starts at 2:20

[@wiser1147]

@@richardfoulkes8436 how was it forged on the drill? Through dies? Can you please advise

[@lolatmyage]

@@wiser1147 Yeah the spinning parts pressed the shape into the material

[@guytech7310]

@@wiser1147 Yes. There are three rotating forming dies that pull and rotate the drill rod blanks forward, causing the drill rods to rotate as they are pulled forward by the dies. The rotating forming dies create the spiral flutes.

[@PROProcesss]

Cool very interesting production I wonder how many years have you been making the drill? I see the equipment is very old and works like clockwork It's interesting to watch.

[@depthinprocess]

😋😋We will continue to show you more interesting production process videos later.Thank you for your attention！

[@PROProcesss]

@@depthinprocess Thank you, we'll be watching you.

[@ayankhan-es1me]

Sir ret

[@DRNewcomb]

Unfortunately, the video explains very little of the process.

[@Rosario_Agro]

Какой уровень производства, такое и качество.

[@antonp1777]

Капитализм и тапки на босу ногу)))

[@delta3eight]

And these are the drill bits you find at those hot dollar bargain shops 😂

[@NotSure416]

6:12 What did you do today? "Oh, the usual, sharpened 10,000 drill bits."

[@jackmclane1826]

No heat treatment? That glowing was just the flute forming. Is it all these drills get as heat treatment? Would explain the "performance" of cheap drill bits.

[@christian-vg1be]

Nice. Po

[@PatriotaUltra]

Hola, un vídeo muy interesante, saludos cordiales desde Chile 🇨🇱.

[@patrikfeher6111]

ah yesss.. chinesium drill bits.. they have a magic ability to turn the twist direction

[@gnightrow4020]

Next show us mass production of screw bits

[@rudi7226]

Me eating pretzel sticks 1:07

[@doctorbrown2169]

Щось я не побачив гартування та відпуску. Це ті свердла яких вистачає на один отвір?

[@hztn]

- Самокал на повітрі після формування спіралі на 2:24 от й усе. Й усе залежить від якості сталі, можуть однаково виглядати та бути стійкішими за совкову р6м5, а можуть викручуватись у протилежний бік як наче з ст3.

[@doctorbrown2169]

@@hztn Тут дилема виходить. Самокалом зазвичай називають швидкоріжучі сталі типу Р18. Вона справді може загартуватись на повітрі, але це не буде правильна термообробка, максимуму від неї не доб'єшся. Швидкоріз сам по собі дорогий - якось не правильно так його використовувати. Тай скидають вони їх в ящик з вже гарячими заготовками, в книжках описують "самозакалювання" саме на відкритому повітрі чи протязі. Тому думаю що вони використовують якусь сильно дешевшу вуглецеву сталь, У8 наприклад, але тут проблема в тому що така сталь взагалі не гартується на повітрі. І ті свердла 100% виходять криві, просто тому що їх кидають в гарячому стані. Колись мені подарували набір китайських свердл ( років 10 тому), кожне просвердлило отворів 10. Заточка не допомагає - вони стираються з боків. Чисто по дереву працювати можна, у них є перевага, вони взагалі не ламаються

[@hztn]

@@doctorbrown2169 - Ну то їх шліфують по діаметру після "термообробки".

[@westvalley411]

Forest for the trees. I didn't see one single bit being made/ cut...huh.

[@andreapicci8410]

6:33 The specified letters???? What letters?????

[@iandarielvelazquezmunguia2362]

So I have to do the hardening myself, got it

[@GnosisMan50]

looks like a "fun" job...no way in hell I would do it. Thankfully, there is always someone who will.

[@ThePsiclone]

you would if your guts start asking if your throats been cut (you get hungry enough)

[@alandesgrange9703]

Not in the USA. Here, people make big money sitting home, and getting paid with the taxpayer's money.

[@giorgiobassi9078]

Una. Voglia.. di. Lavorare...👍👍🇮🇹👍🖐️✋👌🖐️👌✋

[@BitSmythe]

Some descriptions would be nice. *USE YOUR WORDS*

[@4DModding]

Osha have left the building

[@ZakariaAbdullah-pd2iv]

Can any of you help us in mentioning machines, equipment and devices for Drilling bits

[@wileu]

Disposables?

[@irritantno9]

Title suggestion: “Where those shitty drill bits come from”

[@Who-ry8of]

Not a single pair of safety glasses. Someone’s in trouble.

[@roastme2079]

why do so many drill bits come wiht a round ending if that makes them spin in place when drilling?

[@bryanscott8675]

Can @Huggbees narrate this one? I need to know howit's actually made.

[@thawk1965]

I could taste the grinder dust just watching the video.

[@ColCurtis]

Thanks for showing me why those Chinese drill bits don't drill until i sharpen them.

[@thomassullivan6016]

Gotta love wall Street

[@deanii3993]

Imagine getting fired from here for messing up 2 drills😂😂😂

[@enigmatic6969]

Так вот откуда идёт это "га**но" которое гнется руками 🤬

[@CNTHINGS]

Dang I wanted to see the flutes being twisted that's the best part 😢

[@phiksit]

2:20

[@CNTHINGS]

@@phiksit can't really see the neat twist though

[@arthurtomczak8474]

Wait till India starts making them . Dull right out of the box.

[@joecistaro4551]

But how do you make the twist in the rod? Trade secret?

[@fullmetalmachinist3883]

look from 2.20

[@ronblack7870]

the machine with 2 curved dies rotating forms the twist. look at 2:20

[@tareksma1]

I disliked the video because of that. Its the part i was eager to know.

[@GrrrRu]

​@@tareksma1аgгее! Тне ои1у геаsoи l саме неге!

[@GrrrRu]

​@@ronblack7870it is difficult to understand :( as to me it is the only question for me in this process...

[@KishoreKumar-qf5ox]

सर यह मेटरीयल कया है और यह कितना हार्ड किया जाता है सर बताये सर धन्यवाद सर 🇮🇳🇮🇳🇮🇳🎄🌹🌴🙏🙏

[@user-mo5ft1il2n]

так вот где делают свёрла, которые можно согнуть тремя пальцами...

[@jakubs6170]

Where is the hardening part?

[@aleckaleck2492]

Знаменитые одноразовые китайские сверла.

[@promahdel484]

Ага. Как из гвоздилина ст3. Что-то напрягло уже то,что как просто они прокат из самокала рубят .

[@nageshanavad]

Where is this factory?

[@Yis-gv5td]

West Xiashu Town, Changzhou, Jiangsu. If you need products, please contact me. I run a factory like this.

[@Baard2000]

I said.... Worker : WHAT !! I SAID..... worker: WHAT !!!!!!!!!!!!!!!! WELL I SAID ....!!!!!!! worker: WHAT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@garry1214]

I am so thankful that I live and work in the USA, at least I have OSHA to help protect me.

[@janami-dharmam]

Most of the workers there would be just happy to get the minimum wage, right? Why do you need to much labour from the Mexico?

[@HMTechFair]

Aoa ya kahan banty han adres

[@Yis-gv5td]

West Xiashu Town, Changzhou, Jiangsu. If you need products, please contact me. I run a factory like this.

[@antonp1777]

Современные буржуи на качество прибор положили)))

[@54suburban5]

So how did the bit get twisted in the beginning😒

[@hztn]

- 2:24

[@dkmcdk724]

Теперь я знаю как делают китайские говно-сверла

[@inq752]

These are the so-called sacrificial drill bits.

[@gokhanozden2347]

Does anyone have any information about the forming machine?

[@sudo_nym]

''What do you do at work, dad''? ''I make the thing that pokes the knob that turns the wheel that pulls a lever that pushes a button that starts a motor...''

[@leebattick5874]

Coming to a harbor freight near you!

[@_Aeon_]

You get what you paid for.

[@user-bw4wl1xe3i]

1000% бракованные сверла мусор 😭

[@skunkjobb]

Forming the flutes would be the most interesting to see but you didn't show that.

[@guytech7310]

The did at 2:30 (Rotating forming dies)

[@kk2ak14]

And the alloy is the famous chinesium?

[@MegaTarantulas]

Жалко людей работающих там, видно что "шэфы" корумпированные - аппараты старые, техника безопасности не соблюдается и скорее всего запрещается так как при случае ранения "шэф" не будет выплачивать за лечение так как якобы работник сам виноват. Страшно но к сожалению такова реальность. Главное много и быстро и сразу.

[@masoudkhalili7084]

hi, which country it is??

[@zachariasvan3965]

Masoud it's China.

[@mattattwell8059]

I guess the twisting bit is a trade secret

[@1pcfred]

You can see it at 2:24

[@Rheasound]

Harbor Freight drill set.

[@envitech02]

Interesting process but crazy noisy factory. I'll bet a lot of hearing loss going on.

[@luismaryland2305]

What? They are not hand made?

[@gokhanozden2347]

Anyone know anything about the action at 2:24?

[@VincentComet]

Looks like hot rolled forged blanks

[@victimovtalent6036]

mass production equal of unreliability😌

[@bobjimenez4464]

The Cleveland twist drill company in China

[@KCECC-ActiveHealthyAgeing]

👍🙏

[@ryanbeard1119]

Haha the stop is a peice of wood hangi g on a rope, must be a reason...its practicaly, Jungle Teck...

[@tommays56]

That place was such a health Shi% Show %

[@freebird7284]

bit life expectancy 30-45 seconds, i'd like to see their American made counterpart.

[@brianstypa11]

Those are the ones you get that the cutting angle is off and throw away anyway

[@1pcfred]

When the angle is off I correct it.

[@brianfraneysr.5326]

Well, that’s how they make’em for Harbor Freight anyway….

[@1pcfred]

I have the cheapest bits Harbor Freight offers and they work for what I do. It certainly helps that I know what I'm doing though.

[@Loester2]

Agora eu sei onde são feitas as brocas que não duram nem a metade de uma de qualidade!!

[@alierem4266]

You mean that for strong and definitive convincing, we need to view the way things made in China? When things in China can be made (no, correction) ARE being made from cheapest and most inferior of quality as raw material, no convincing is needed that they profit from masses of buyers of 'cheaper' products produced.

[@kevfaulkner6129]

Accidents waiting to happen at every turn, injuries I suspect treated as “ collateral damage” OMG , OH& S would have a field day.

[@hotpuppy72]

I'm sure they have a supply of a dozen spare workers waiting to be used. No concern for their people for sure. No wonder American companies can't compete with this domestically.