Great way to extend your WiFi range through ASUS Ai MESH system!

[@jay-og-9912]

You should have your strongest router as the primary as it will be handling the heavier load 😉

[@DavidCrownLoudest1out]

Yeah I was wondering about that isn't that a fact don't you need to have the strongest router connected first to the main connection and then the weaker one as the nod?

[@bortexgaming3972]

@Cajunomics technically yes you can but you’ll only receive the same speed you’re paying for.

[@NPatto]

I've just bought a TP-Link AX11000 MU-MIMO Tri-Band.. But reception is still shit at the second floor.. If I'd buy a second one.. Can I use it to extend my first router? Would it work wireless or do I need a ethernet cable between them?

[@Filotej]

I have the RT-AX58u and RT-AC68u setup as aimesh that replaced my airport extreme. i live in a 3 storey TH. I am so glad I went with asus, it is easy to set up and configure. I got the 68u used from kijiji.

[@TheTanelChannel]

Yeah they have made everything pretty nice and easy for everybody and thats how it should be for all routers tbh!

[@SultanAlkaabi]

Ofcource it will work on stairs it's like open area, try it on two room with same concrete walls

[@RF-sn4tn]

Excellent presentation + killer smile

[@HSNG10]

Should use the stronger router as the main and the weaker router as Aimesh node.

[@Ak-47ram]

I'm wondering if im able to set up the gtax1100 router as a node and the mid range asus one i have as a router and if so will it make a difference in performance..

[@vageeshraizada7158]

Some fh 3 nostalgia

[@rhygevaldevieso8076]

Did you use the 5G connection during the speed test?

[@Franco03160]

Maybe switching the node and primary router would help

[@knekoosh1613]

Is it better then a 1080ti

[@Profaniterrific]

😂😂😂😂😂

[@akeelshah7904]

It has RGB so take that into consideration the aura self replicates fps

[@akeelshah7904]

😂😂😂

[@luisvaldes4492]

Do you have to turn off the WiFi of your Modem in order to set up the AiMesh?

[@vojta4045]

*what are waiting for!!!*

[@LittyJonez]

Is the secondary router restricted to its original bandwidth? Or does it use the primary routers specs?

[@bozooo]

Hey i just connected my second asus router and it says its offline

[@JustMe619toby]

So unless I missed it the second router set up in mesh does not need ethernet ran to it? Just the main?

[@TheTanelChannel]

Yep exactly, it just needs to reach wirelessly to the node! Pretty neat stuff :)

[@wealthyprosperous628]

I have an old N66U router. Can I use that for AIMESH.

[@fofocho71]

No

[@GrinDiesel1969]

I am not sure why you wouldn't use the Better Router as the Primary?! The AC5300 should be your Primary, it has more through put capability and it is Tri-Band (5GHz, 5GHz, 2.4GHz). The AC2900 is only Dual Band ( 5GHz, 2.4GHz) and not as much though put and Bandwidth capabilities. By setting it up like you did you are Bottlenecking your Network and only getting 2 Bands for AiMesh... Plus the AC5300 would probably have better overall coverage to start with when going to the Stairs without the need for the second Router! Also why do you need so much Bandwidth in the hallway at the Stairs?! 🤷🏻‍♂️

[@akeelshah7904]

Ahaha Ur so right

[@ujjvalw2684]

What? *40* % *FASTER* ???

[@Ohakoo]

40%FASTER!

[@xandersplace6324]

you sound like tord from eddsworld

[@Auswandern-tg6kv]

muy bueno

[@Justcuz99]

This hard to watch imo

[@lemonjooce9840]

Can it help me become Spiderman?

[@MrKorsah55]

It's hard to listen to you ,too much talking