TBR 2 Into 1 Exhaust Install - Sportster Build Episode 7

★Haven't seen the earlier videos in the Route 66 on a Harley Iron 883? Watch the entire series here: • 28 Days - Route 66 on ...
★If you are interested in any of the parts or components I used in this video, leave a comment below or visit the Amazon Storefront: www.amazon.com/shop/greategret
I do receive a small portion of your purchase and it helps out this channel a ton!
Looking for a specific part or gear item? Scroll down 👇
Current Bikes:
👉2021 Honda Africa Twin Adventure Sports ES
➡Klim Badlands Pro Jacket: amzn.to/3mGjJGH
➡Klim Badlands Pro Pants: amzn.to/3k2H5EN
➡Arai XD4 Depart: amzn.to/3mF4fT5
➡Forma Adventure Boots: amzn.to/3wecCZ3
➡Touratech Pannier Racks
👉2016 Harley Iron 883 Olive Gold
➡Exhaust: Vance and Hines Big Radius - amzn.to/2M5Ha6W
➡The ONLY seat I'll ever use on a cruiser: Saddlemen Step up seat - amzn.to/2tfvCr5
➡Sissybar: Burley Sissybar - amzn.to/2JNtJMt
➡Saddlemen BR3400 Tactical Sissybar Bag amzn.to/2yo74RA
➡Arlen Ness Black Fusion Grips: amzn.to/2M2d70c
➡Biltwell Chumps: amzn.to/2MEMiAj
➡Tachmount motorcycle phone mount: amzn.to/2EAt38o
➡Wisamic LED Headlight: amzn.to/33jgiyM
➡DK Customs tank lift and Coil relocation
Past Bikes:
👉2020 Honda Africa Twin
👉2021 Harley Low Rider S
👉2017 Harley Iron 883 Olive Gold**
➡Sissybar: Burley Sissybar - amzn.to/2JNtJMt
➡Lindby Multibar for all XL models - amzn.to/2ylE4db
➡Exhaust: Vance and Hines Big Radius - amzn.to/2M5Ha6W
➡DK Customs tank lift and Coil relocation
➡Saddlemen Step up seat - amzn.to/2tfvCr5
➡Kuryakyn Momentum Vegabond bag: amzn.to/2yo74RA
➡Arlen Ness Black Fusion Grips: amzn.to/2M2d70c
➡Biltwell Chumps: amzn.to/2MEMiAj
➡Tachmount motorcycle phone mount: amzn.to/2EAt38o
➡Wisamic LED Headlight: amzn.to/33jgiyM
Other Cruiser Gear
➡Boots: TCX X-Blend - amzn.to/2JPL07P
➡Jacket:
AGVSport
Scorpion Covert Motoflannel
Milwaukee Leathers: amzn.to/2JoGtFf
➡Pants: Scorpion Covert pro riding jeans - amzn.to/2MB8ATo or Rokker Red Selvage
➡Cortech Super 2.0 18 Liter Tankbag: amzn.to/2t8Lo6Z
Here's where I get all the music for these videos: www.epidemicso...
The Camera Gear I Use
Super inexpensive and useful Camera: amzn.to/37cD2jE
Voiceover and Camera Mic: amzn.to/3lR8dVI
Parts for the Super Fast Editing PC I Built
Super Useful Motherboard: amzn.to/353aFBx
POWERFUL Graphics Card: amzn.to/3k2yYWJ
FAST CPU: amzn.to/3nTUhfp
Useful and Inexpensive power supply: amzn.to/3lVySjV
16GB x 4 (64GB) DDR4 with airflow: amzn.to/31fnDei
1T M.2 Drive: amzn.to/2GYldKq
Great Egret, Great Egret Adventure and all entities associated with Great Egret Media are participants in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Ride safe, seek adventure, and keep your wheels rolling in the right direction! right direction!

[@SaddleTrampTV]

That looks and sounds really good, Joe!

[@AJKammerer]

This was actually the exhaust I wanted, but I couldn't find it in stock anywhere at the time and ended up going with the Bassani. They look so similar I can't imagine performances is much different. Rad video!

[@MasonCNichols]

This is an awesome video. I can only imagine the time that went into making this with all the different camera angles. This has got to be some of the best quality out there!

[@GreatEgret]

Dude, I worked really hard on this and other videos, so that means a ton to me!

[@brucewayne2495]

Great video Joe!! Good angles too. Keep em coming brother. 2 into 1 looking great!

[@GreatEgret]

Thanks man! I really worked hard on making this one different than the rest out there. Great to know it’s enjoyed.

[@brucewayne2495]

@@GreatEgret Definitely enjoyed it Joe. Those angles were on point!

[@kritiko]

Great video Joe ! thx for showing the mishapps ..has it happens to all of us !😉

[@ScottandMargieontwowheels]

Looks and sounds great brother

[@d-lowz-no9931]

Very nice. Can’t wait for more content!

[@GreatEgret]

Thanks, man! More coming your way soon!

[@d-lowz-no9931]

@@GreatEgret awesome man! I’ve been watching out for a new video. Keep up the good work brother!

[@chaltaloma]

Nice video Joe and love the 2 into 1 exhaust.

[@GreatEgret]

Thanks, man!

[@vntgmx]

Hey just a follow up in case you haven't added a new set of pipes. I just put on a set of Khrome Werks slash cut slip ons on my 2020 Iron 1200 and I gotta tell you they sound freaking awesome. With out a doubt best sounding slip on I've ever heard on a Sporty.

[@wingandhog]

Super bad-ass in looks and sound. Nice job Joe!

[@vntgmx]

Good informative videos on the install. Good for you for trying something different but not a fan myself of the TBR. Hopefully it hits the sweet spot for you as you get some miles on it. Enjoy the vids.

[@GreatEgret]

Turns out I’m not a fan of the TBR either. I removed it and went back to stock until I figure out what way I want to go with it.

[@vntgmx]

@@GreatEgret Honestly I don't think it fits the look of the Sporty and I've never been a fan of the sound of them on Harleys or Metric bikes. I'm currently running Cobra RPTs on my 2022 883 as I've had them before but I'm leaning toward trying the Screamin Eagle Street Canons as I'm not too fond of the decibel level these days on them. I'm also looking at Khrome werks slash cut but I'm thinking they may be just as loud as the RPTs as I'm just looking for a nice low rumble that is just a little bit louder then stock which I think the Screamin eagles might just do. Hey just an FYI if you go with a tuner I wouldn't recommend the V&H FP4 as they only currently only have V&H maps and a few Harley maps loaded on it for the 883. If you can find it you'll be better off with a FP3 version. Sucks that they are pushing the FP4 and making it next to impossible to find the predecessor FP3 as the new version isn't full of a multitude of map options as they of course advertise. Good luck with the build!

[@GreatEgret]

I’m with you on the dB level. I got lucky and got an FP3 for this Sporty.

[@KSMotoCafe]

looks and sounds amazing!! I wonder if it sounds different after a FP3 tuning.

[@GreatEgret]

It sounds so amazing! Especially compared to stock. The dB levels at the end we’re done after a canned map was tuned. Runs amazing. Though I’m curious what it would be like after an auto tune.

[@ZoomyZoom77]

How many miles on your original 883 and how many on this one? I've own a rigid mount evo and they have been reliable. Curious how the new ones hold up. Thank you!

[@GreatEgret]

I put a little over 30K miles on my original 2017 that I bought new. On this 2016 I bought it with about 3K miles on it and put on about 1000 miles so far. I have a longer trip planned on the 2016 later this summer. If regular maintenance is done and checking critical fasteners often, these Sportys are super reliable.

[@ZoomyZoom77]

@@GreatEgret Sweet, good to hear!

[@bigd4561]

Why I wish I had a garage!

[@FranBunnyFFXII]

I find it funny how my bike and yours have practically nothing in common except the brand name, and yet I still watch every one of your videos. haha. I was wondering, why exactly does everyone use the liquid loctite? I like using the gluestick loctite. Much easier to use and store.

[@bigd4561]

Respect... how long did it take you? Great sound. Ate you looking at 15% more power?

[@GreatEgret]

Thanks man! It’s always hard to judge how long something like this takes without filming it. This took me about eight hours because I needed to set up the camera, lighting, audio, and make sure I’m doing the job right for each shot. That adds time to the whole process. I bet I could knock out the whole installation in few hours because I’ve done this a few times before.

[@bigd4561]

In passing.. I'm the guy who added the Vance shorts... my wife says it was already loud enough but now "it sounds like a beast". Also, what attracted me to your site is your love for the 883... I feel and share your love for it. A real bike! Just sharing... stage 1 has had little impact on MPG.Did headlight. Self molding grips. Better seat + air hawk. More performance no question. Next step... suspension. ... have ideas for rear but suggestion would be welcomed.

[@ahmedalhosani]

Nice 👊🏽😎

[@drsparwaga]

Ah damn, wish you had gone for the Big Radius. Not just for the sound, but also for the looks. I don’t like that the TBR is chrome.

[@GreatEgret]

I like the Big Radius too. It’s nice to try something different. What’s nice about the TBR is it’s actually not chrome. It’s stainless steel and it will take on a gold color over time.

[@theorthobiker]

Why am I not surprised that when I go looking for a video on Two Brothers Comp-S 2 into 1 Exhaust, I would find one on your channel :D I have been wondering if leaving the heat shields off would be worth it, getting that nice gold color throughout the exhaust, on a blacked out bike with subtle brass highlights where possible. Has it seemed to color pretty evenly?

[@GreatEgret]

It actually does look really nice as the heat colors it, and leaving them off for looks would be cool looking, but no way am I riding without heat shields. This bike get hot as it is 😳

[@theorthobiker]

@@GreatEgret What, the glowing red hot look is not appealing? XD

[@GreatEgret]

😂

[@donpet8258]

What windshield and Handel bars are on that bike? Thank you

[@GreatEgret]

That’s the Memphis Shades Del Ray windshield and the handlebars are the Biltwell Chumps. I cover both in the full series: kzbin.info/aero/PLRA7CrqQbaWIzcVgB-vqi0E_86qeRXs56 Episode one I cover every mod I’m doing. Episodes three and four are dedicated to swapping out the handlebars. And there are links to buy most everything I have done to the bike in the description of every video in the series.

[@revknives]

Hello from Spain! does it make a lot of noise when traveling? Thanks!

[@GreatEgret]

Hello! The sound is different and you get more airflow, but the volume is around the same as stock.

[@revknives]

@@GreatEgret Thank you sir!!

[@DanielPrater93]

What was the tank lift 3 inch or 2 inch ?

[@GreatEgret]

1.5”

[@colinsmith1298]

What tuner did you ise

[@GreatEgret]

Vance & Hines FP3. I don’t think it’s available anymore.

[@willcountypowersports6338]

I only see this exhaust with the carbon fiber tip. Do you have a link for it?

[@GreatEgret]

I don’t think they carry it anymore. This is an older video. I look for it as well, and couldn’t find it.

[@TJSArms]

You need to tune the bike

[@GreatEgret]

Yup. I did. Vance and Hines FP3. This video is about installing the exhaust, not tuning the bike.