GrimmSpeed Top Mount Intercooler Install - 2022 Subaru WRX / FA24

[@Ezio214]

Great install video!

[@ZibrayMusic]

How much more power??????

[@daviddin8863]

Why not a custom charge pipe intercooler combo?

[@gwynbleidd7177]

Most likely still in the works.

[@douglasmaynard586]

Perrin did exactly that remove that piece of crap plastic charge pipe

[@mustangred6077]

Does this Require a tune on the car?

[@grnmchn4183]

No

[@GrimmSpeed]

No tune required!

[@JermJermFlores]

Will we ever be able to go catless again? And will I get a CEL with the new gesi downpipe v2

[@GrimmSpeed]

Seeing where things are going, probably not. In our testing of the v2 downpipe, we did not encounter any CEL lights.

[@chrisschuster6451]

When are we getting the next episode on the GC build?

[@ryanharrison2260]

Arthur was fired, he took the car with him. They won't have anymore vids for that.

[@daviddin8863]

You will have to follow art to see it

[@chrisschuster6451]

@@daviddin8863 Link?

[@chrisschuster6451]

@@ryanharrison2260 link to Arthur?

[@chrisschuster6451]

@@JustN0pe3 link to the channel?

[@DECKARD263354BR]

Does this require any modification to the bonnet scoop ducting above the intercooler? Also given the higher rate of flow, will installing this result in a slight increase in turbo lag ? Thankyou

[@thomasontiveroz844]

Is there any additional steps need for the throttle body gasket or does this not utilize any additional parts

[@brian6speed]

it comes with them pre-installed. You might want to oil them up to slide in easier.

[@85mmonroe]

Any idea on when the bpv's will be back in stock?

[@GrimmSpeed]

We just released the V2 BPV!

[@jonnyftw1441]

Would this intercooler help me make more power if i retune with it?

[@jjs777fzr]

It should reduce the air charge temperature slightly more than the OEM unit. Where a upgraded TMIC really shines is the ability to avoid heat soak. The OEM unit will heat soak after repeated runs whereas an upgraded unit will dissipate the heat better. Don’t expect miracles. It’s sitting directly on top the engine which is producing much heat. For the best IC you’d want to consider a FMIC. Less charge temp allows the engine to produce more power whether it’s tuned or not.

[@bryanallendorf7064]

I believe ETS has more charge rows and is bigger. What are the specs?

[@GrimmSpeed]

The new TMIC uses a 19in x 7in x 4in cross-flow core with bar and plate construction, providing a 63% increase in total volume and 209% more flow area than the stock top mount.

[@brian6speed]

bigger doesn't always mean better. this one tested at the top for tmic's.

[@chuckpeifer8550]

Does this require any modifications to the interior hood scoop?

[@brian6speed]

no