You have a good skill at taken people through your lecture, the cause and why things happen the way it does in a circuit. Keep up the good work Mr. Thank you.
@analoglayoutdesign2342 Жыл бұрын
Thanks for the feedback
@mehdimehdi99504 жыл бұрын
very well explained. Just what I needed! Thank you. Bless you!
@sanjayreddy90354 жыл бұрын
I am very interested to watch every videos because of clear explanation
@analoglayoutdesign23424 жыл бұрын
Thanks
@user-bz5gh2gh9r4 жыл бұрын
I cannot agree anymore !!!
@basavarajjyante32152 жыл бұрын
Sir your Explanation is very good, understandable by anyone, i request you to do the technical videos more n more.
@analoglayoutdesign23422 жыл бұрын
Sure.. will do..
@MK-fu3jp3 жыл бұрын
this guy should be a professor. well done.
@chetanniradwar30653 жыл бұрын
Best video..
@arun653944 жыл бұрын
Thanks sir...It was very useful and your explanation is easy to understand with much clarity. i am requesting you to upload more videos sir...
@analoglayoutdesign23424 жыл бұрын
sure
@amitkale211Ай бұрын
For turning on m2 that is pmos. Vgs should be less than vth right so how it could be turn on at 0.9
@sailakshmi62785 ай бұрын
I think 3rd case was wrong only m1. Is on m2 is off bcz vgs less than vt in pmos vgs is 0.9 but vt is 0.6 m2 is off condition
@peehu20112 жыл бұрын
please explain mos operating regions again with Vds > vgs-vth perspective. I think in case 1, 2 one Transistor is off and other is saturated, in case 3 both are in linear region. Please clarify.
@analoglayoutdesign23422 жыл бұрын
Ok will add a video on only transistor regions of operation during transition in a inverter
@saikrishna16404 жыл бұрын
Inductor does not accept the sudden change in current. Where that current goes?
@analoglayoutdesign23424 жыл бұрын
Inductor opposes the change. Current will still flow thru the conductor.. it opposes the change by inducing a big voltage...Ldi/dt
@analoglayoutdesign23424 жыл бұрын
*inductor not conductor
@ayyappann68604 жыл бұрын
Why the voltage is plus 60mv instead of -60mv in ground bounce sir
@analoglayoutdesign23424 жыл бұрын
from supply it will subtract..ie .6Omv below[-6Omv] and ..from ground, it will be above..ie. +6OmV
@ayyappann68604 жыл бұрын
@@analoglayoutdesign2342 thanks for the quick reply sir
@ayyappann68604 жыл бұрын
@@analoglayoutdesign2342 Sir the current is flowing from vdd to gnd due to transition vdd/2, hence we are getting ground bounce due to parasitic inductor which opposes the current flow, what about the supply bounce sir...same reason or any variations are there...