Remote programming for 2005/2007 Toyota fj/4runner

[@stefanieboyd4871]

I noticed the one thing you have to do is lock the steering wheel prior to the steps🙌🏽 your video helped me tremendously! Thank you!

[@grungr668]

Glad my video helped, thanks 🙂

[@CulturaJaliscoMexico]

Thank you for your video. I used the following procedure on my 2005 4Runner and had no problems programming two remotes (this procedure eliminates the additional steps you added of simultaneously pressing the LOCK & UNLOCK buttons 3 times for 1.5 seconds and opening/closing the driver's door immediately thereafter). The procedure I've included is found on multiple websites and worked like a charm the first time. Programming for a 2003 to 2005 Toyota 4 Runner Used the following procedure to add or replace a remote and/or restore remote programming due to system malfunction. Procedure: Sit in the driver's seat with the door closed. Key out of ignition switch Open driver's door (door should remain unlocked with key removed from ignition) Within 5 seconds: Insert and remove the key from the ignition 2x. Within 40 seconds: Close and open driver's door 2x. Insert and remove the key from the ignition 1x. Within 40 seconds: Close and open driver's door 2x. Insert the key into the ignition and close the driver's door. Turn ignition ON and OFF: • Once to program a remote transmitter code whilst retaining the original codes • Twice to program a remote transmitter code whilst erasing the original codes • Three times to check how many remote transmitters are currently registered • Five times to erase all registered codes. Remove key from ignition: System should now lock and unlock vehicle: • Once, twice or five times, depending on which mode has been selected • One to four times, slowly, to indicate number of remote transmitters registered. Within 40 seconds (BUTTON PROCEDURE): Press and hold LOCK and UNLOCK buttons simultaneously for 1.5 seconds Within 3 seconds: Press LOCK button. System should now lock and unlock vehicle once to confirm registration, twice to indicate registration has failed. Press UNLOCK button. Within 40 seconds: Repeat BUTTON PROCEDURE to program additional remote transmitters. When Finished: Open driver's door to exit programming mode. NOTE: A maximum of 4 remote transmitters can be programmed to the vehicle’s keyless system.

[@jeTTaTurbO]

See above if you are having issues! I bought two new remotes and they wouldn't pair. Those instructions work correctly. If you are like me and do not have any remotes, you have to rewrite the code in order for the new ones to work. This involves cycling the key ON >> OFF twice, instead of once - as stated above.

[@187Alen]

1) Open and unlock driver side door. 2) Put key in and out 2 times. 3) Close and open door 2 times. 4) Put key in and out 1 time. 5) Close and open door 2 times. 6) Put key in. 7) Close the door. 8) Switch key on and off. 9) Remove key. 10) Doors will lock and enter programming mode. 11) Push and hold lock/unlock button for 1 and half seconds. 12) Push lock button for 1 second. 13) Do this 3 more times. 14) Open driver side door and close. 15) Push and hold lock/unlock buttons on remote for 2 seconds. 16) Release buttons and open the door. 17) Close the door and check if it works.

[@jordanbailey9654]

Make sure the door chime works or it won't program. Also you don't have to open and close the door you just need to press the chime button on the side pillar.

[@barbarahill7432]

Thanks for posting the instructions to the above video... I printed and used them which made all the difference and was a great help!

[@Teerzad]

THank you so much. Your instructions worked on my 2007 FJ Cruiser on the first try. Thanks again.

[@barbarahill7432]

Thank you so much.. saved me many dollars I tried according to Mfgrs instructions... did not work... watched your video and BINGO! Large gratitude to you for taking the time to post this instruction which worked perfectly the first time out!

[@iix-revenge-iixyt8076]

Appreciate it bro, others videos didn’t work but this one was perfect🙏

[@TacticalPersian]

Fantastic demonstration and information! I had the exact same issue with my 2006 4Runner even thought I tried the instructions supplied. This worked the very first time with a keyless remote from Amazon as well. Thank you very much for this helpful video.

[@RobertMiami305]

Ok this was pissing me off the first 10 times I attempted with no success but finally after the 11th attempt it work!Woooohoooo Watch every specific move this guy does,especially when the car is ready for programming .hit lock/unlock simultaneously and then lock button .this sequence three times. Finally success and this video saved me $180.00 from my Toyota dealership....FINAL VERDICT: 90% Happy Only Setback is when I push the roll rear window down button my horn goes into panic mode. But I can live with using key on rear window

[@eddiethompson4894]

thank you very much!! I have been working on my keyless for months, the extra steps was the key to make my keyless work on my 2006 4runner,

[@cobraphi]

Amazing!! I can't thank you enough, I just saved $150 and programming cost as well, compared to the dealer by just buying a simple remote from an Amazon. Thank you again..

[@shaunweideman]

Awesome tutorial. This one actually works! Make sure you use the master key, not the valet key.

[@manuelsalvatierra2940]

Worked on 2006 4Runner SR5 RWD. But for the step of pushing and holding the LOCK and UNLOCK button for 1.5 seconds, then push the Lock button, the car locks then unlocks. I only did this one time. After I did it once I opened and closed the door. Pushed the lock button, it locked. Pushed and hold the rear window button, it rolled down. If it didn''t work, I was going to do it 3 times like in your video. Thanks for the upload

[@grungr668]

Glad to hear that it worked. ...sometimes you have to alter these steps for it to work like I did. ...thanks.

[@carljean-pierre739]

This works for me at the first try. You really save my time. Thanks.

[@squishyYumYums]

It worked! 2005 4Runner Limited, 4x4 4.7L. Thank you.

[@victorbabbitt8988]

You are the best! Thank you for doing this video. I didn't believe it, but it worked like a charm.

[@eddies5108]

Thanks bro, it works. Using a OEM Toyota key fob for my 2006 Toyota 4Runner

[@manolaso123]

Thanks man !!!! Watching the vid and doing at the same time was perfect ! First try all set. 👍🏼😎🙏🏼

[@hungthi9578]

Thank you. Those extra steps worked on my 2006 highlander.

[@richardgarcia1027]

Thanks for your help, I followed all the steps as you did them and it worked perfectly. Where I can find the control programming video?

[@metre23]

for the people so dont know just follow the video its really works :D nice job thank you dude :D i soo happy :3 , para las personas que os hablai español solo seguid el video si funciona al 100% joder que feliz estoy :D

[@danielfarooqi95]

Thank you so much. Very easy to follow. Worked like a charm

[@edwingcubias1986]

Gracias por la ayuda. funciono en la programación de mi 2007 toyota tacoma.

[@angelgracia7631]

Thanks men is working 💪🏻

[@ericasmith5654]

This was very helpful. I managed to do it by myself. Great, thank you.

[@schanthery1]

Hi This ti work !!and very helpful for my Fj cruser 2007 thank you Programer!!!

[@cobyhunsaker2384]

🙏🙏🙏🙏🙏 Thanks!! Works great other instructions don’t work.

[@العنزي-ر7ص]

زبط معي 👍🏻 Thinks great video and useful 👌🏼

[@kylegodwin3734]

I have tried over and over the lock cycles through like 2 time. I see that in this video it only cycles through once. what can I do to solve this issue ? Thank you

[@essexthunder1]

I get into the programming mode fine when I go to holding the lock and unlock I get nothing? Any advice? Great video just can’t get the remote to take hold? Is there a way to erase and restart?

[@grungr668]

I'm no expert, either it'll work or not, just keep trying or search the internet. I came across me programming my vehicle literally by accident and just thought I should post it to help other's. Thanks for commenting and watching.

[@bryanrivas2610]

Were you able to program your remote? I'm having the problem issue

[@GastonCarrizo]

Thanks brother!! Worked!! 👍🏻🙏🏻

[@rubenrauseo3885]

Thanks so much for your help it work perfect ***** 5 five stars for you brother!

[@dianepellerin2235]

Very very helpful, thank you so much.

[@Dalexcompany]

Worked on my fj 2007, thanx

[@dkhamsyify]

Alexander Bautista does it matter if it’s a manual?

[@abdessamadkarim4972]

Thank you man it work very good

[@dkhamsyify]

Does it matter if it’s a manual? I’ve tried it 4-5 times now on my FJ. The car doesn’t beep with my car door open when it’s in the ignition either.

[@dsneakerz141]

This one worked

[@yingliang3362]

Did not work on a 2012 Highlander. Will not go to programming mode. Any suggestions?

[@COMBUST1ER]

Thanks man this worked for me too

[@geminij610]

Hi. Do you need two remotes before you can program the third or do i need just one remote to program another? When I bought my used 2004 4Runner they only had one remote for me. Thanks jaye.

[@grungr668]

I had no remote when I bought my used fj, just 2 keys.

[@Pr0ph3cy-k5z]

Didn't work on a 2000 Toyota 4runner. I tried using this video and by the website's instructions.

[@mariomonzon7473]

Thanks this helped alot

[@kylegodwin3734]

I just bought this 03 4runner and I'm pretty sure the guy only have me a valet key. Will this Hender the programming ? Thank you

[@grungr668]

I have no idea if it will hinder programming. I am not an expert at this programming, I kinda just figured it out by trial and error and this is what worked.

[@shaunweideman]

This is an old post but yes it will. Your comment helped me figure out why it wasnt working to me so thanks for that.

[@tedness8569]

worked great thanks

[@seinundzeiten]

I wonder why it does not work on any of the Tundra vehicles...

[@wazinb]

can a different fob from another make not a toyota work?

[@michaelcook6240]

"Amalazon" lol

[@andyandyabc]

Great video Man, I Will give you ****** stars you just save me 120 bucks. Thank you thank you thank you. And of course I got my fob from Ebay for 14 bucks. That's great.

[@unitrecordcorporation9616]

How about rear window? Does it work?

[@grungr668]

You gotta use your keys, I don't think your remote will open the rear window.

[@unitrecordcorporation9616]

Mine does before..

[@unitrecordcorporation9616]

@@grungr668 you have to press window for 4 second and it work

[@grungr668]

Hmmmmm....good to know.

[@radanju3]

Video starts at 1:30

[@olegal11]

thank you sir.

[@salehstrong]

Thanx man

[@lexisf1440]

Bro, but who ironed your shirt lol

[@grungr668]

My maid was off that day...hehehe...

[@cobrajack-official]

tah tah tah today, junior! Shit.

[@grungr668]

that's funny hehe...senor.

[@cobrajack-official]

grungr668 Pulling my hair out trying to program a new fob for my 2007 Tundra. No confirmation so far.

[@grungr668]

Worked on a few Toyota vehicles, haven't heard of it working on any tundra's yet...

[@2thebaum]

confusing. too much talking and confusing people while you are pressing unlock-lock. you keep saying "hold lock button" .. that's, of course, wrong. it's both buttons and then the Lock button separately

[@QuiksilverSurfingVu]

Thank you very much you saved me so much time and effort in programing my key phob

[@QuiksilverSurfingVu]

Thank you very much you saved me so much time and effort in programing my key phob

[@QuiksilverSurfingVu]

Thanks again it actually worked great your instructions were right on the spot starting at 1.30m👦🕺🛠️🚗🎞️📲🎬🚗you R definitely the man ..now I have 8 🔑🔐 fobs thanks to you the world of Toyota is a better place to live in !!!!!🚗📲🎬🎞️