How to program key fob remote 4th gen 4runner 2003-2007

[@MarioLoco03]

UP, DOWN, LEFT, RIGHT, A, B, SELECT, START. Car is now in god mode.

[@eriks8906]

Worked first try! I wrote out the process, which was easier to follow for me so here it is. Key in/out Open door (Key in/out) x2 (Close/open door) x2 Key in/out (Close/open door) x2 Key in Close door Turn ignition on/off Remove key [Lock should cycle on own] Hold lock/unlock on new key 2 sec. Press lock on new key Open/close door Press lock (hold?) On new key

[@PhelpsLife]

This written out example worked for me. Thanks!

[@haileyswisher770]

I was missing a step somewhere. This worked great. Thanks!

[@greggjarvis133]

Thank you for writing that out I couldn't get it on the video! Ha

[@danielptoro]

THANK YOU! Everything is a god damn video nowaday.

[@jdnonya]

You are amazing, thank you!

[@laurenmcmahon1895]

You just saved my life. The manufacturer didn’t have the right steps for their own product. This worked. Thanks!!!!

[@tylerbarley7042]

Works great, bought the same remote off of amazon for $24. Took a couple of tries. I think that last step of push then push down for a long second seemed to do the trick for me. Followed exactly is pushes and timing then it worked for me. Pretty easy in the end. Thank you

[@denisgonzalezblandon1538]

does the vehicle start with the new one you purchased? after you had the key cut?

[@jacobdinverno5087]

Are the best videos I have seen in a while! I was able to do everything as you did it at the same speed and it worked perfectly! I ended up programming two remotes, so I knew not to open the door until I held the second remote down for two seconds and locked it also. Thank you for taking the time to post this video.

[@ThatBoyInPurple]

Thanks so much man! if anyone is having trouble, one thing I had to do was make sure my door was closing all the way every time it needed to and not just half way.

[@womackke]

Your welcome! Good tip. Must follow instructions exactly

[@kaandogan543]

This worked perfectly 2005 4runner thank you!

[@rickgidney1005]

I had to do it a couple times, but thank you so much bro. It worked with these $20 Amazon things. I bought the car without any kind of fob but now I have one. I appreciate it.

[@RobertHagelberg]

Can you post a link for that particular key fob? Thanks

[@palmadaawin3856]

I tried this and it worked on my 2004 4runner. Took a few tries but eventually I got the remote I purchased on ebay programmed . 4/12/2021 .

[@EricBalarezo]

I’ve tried it over two days, get to the last step, hit the unlock/lock for 2 sec, then the lock button, the locks cycle twice but the fob won’t work as in the video. This is the fob I got from eBay: www.ebay.com/itm/233636420072 , any thoughts?

[@EricBalarezo]

FYI, this fob from Amazon worked like a charm. Though the blade comes premounted and you may need to take it apart if your locksmith's machine won't take the whole fob. www.amazon.com/dp/B089VSQVXK

[@AllenHChang]

@@EricBalarezo Do you cut the new key blade identically to the original? some videos say the cutting is different

[@chrisnkimberlymengel2602]

Wicked cool! Worked on the first try! Thanks SO much!!!

[@tommyho6437]

I just follow his direction and got it program in my first try…. Thank u and for the key program also.

[@charlys1219h]

Thanks for your hard work 🙏 I follow your steps on how to programming the key and the remote control and 💯👍 working !!!

[@garrettm.2843]

Worked like a charm

[@ibrahiimirvin2762]

It worked, thank you soooooo much sir.

[@HookedOnJonics]

Thank you! Bought a similar key and it’s working great.

[@ethanknight2046]

Thanks for making it so easy!

[@lostsaint]

saved me hella money bro thank you for this

[@ethantratz5680]

Got question on the cycles I did this multiple times and every time it’s supposed to cycle it does it twice instead of once

[@Medic-ry3uk]

Will that new gen key need anything else for car to run? Do I need old key in vehicle still? Or is this just all I need and key cut ?

[@rbtfcf]

Un maestro, se agradece la ayuda, grettins from 🇨🇱🇨🇱

[@yoyoglock4]

Worked great the first time. Thank you 😎

[@lutomson3496]

problem with that new style fob, depending on how many keys you have had done you have to take it to the dealer to get a reprogram including the original key so its not a plug and play

[@PhelpsLife]

This worked perfect. Bough the same key from Amazon as well. $24 bucks. I bought this 2003 4 runner (v6) used in amazing condition recently and it only came with an old twist key. This is a huge upgrade to be able to lock and unlock with remote. Also the back window goes down as well. I can’t get it to go back up with remote tho. Not a huge deal but ya.

[@womackke]

Awesome. Yes no way to roll up the rear window with a remote not even the factory one

[@PhelpsLife]

@@womackke Ah ok. I am assuming they did that for safety since there are no stop sensors to make it stop going up if something were to get stuck.

[@jonathangonb]

@@PhelpsLife Check the owners manual for the back windows. My 2007 4Runner SR5 allowed me to roll down/up the windows with the original manufacturer key fob. Great video though Womackke! Saving me money.

[@tommyho6437]

@@PhelpsLife for the rear to go up with remote u have to mod it. They have a KZbin channel to teach u

[@dialysisapproved]

To bring the rear windows back up use your key in the rear door and turn it right right and hold it. It will lock the truck and roll up your window. :)

[@keithkreatives]

Where did you get the key/fob combo? Doesn't it also require a "chipped" key?

[@Notmyname64]

It works, took me 3 times bc I'm a dumbass, but it works boys

[@PanchoPistolas45]

😂😂😂

[@lennettecowens7274]

Hey girl my name's Lynette I use your video to program my keyfobs for my Toyota forerunner the battery was replaced and I've done the same steps over and the keyfob still will not synchronize to my via you synchronize to my vehicle any suggestions I greatly appreciate it because you're 1st fitted video was totally awesome

[@elliottberkley]

Worked on my 03. Great video. What kind of dark arts witchcraft is this?

[@winstonyang8515]

Thanks for the help works on my 06 run er

[@Rebelsmic]

Awesome!!!! My only dislike is that the horn button is super sensitive.. set off alarm super eazy.. ..... can u tell me how to open this fob???. so i cant disable the horn button

[@mattakadanja]

SOOOO helpful. Thanks, man.

[@Alienman51]

Quick question hopefully you respond would it be possible to add a key fob Without the original fob. I still have the original keys.

[@allans7281]

Where on earth did you find that dance

[@elliottberkley]

Agree. Hokey pokey.

[@steffNn]

Does the tailgate window go up down with the remote?

[@beptex2858]

It doesn’t want to enter programming mode. Could it be because of an aftermarket alarm system keyless entry that has on the truck?

[@stephaniemiller7582]

Do you have a link to the key fob?

[@Brightly747]

I programmed my new Fob, but original is now dead. What did I do wrong?

[@womackke]

There may have been to many programmed and it erased the rest. Try reprogramming your old one same as you did the new one

[@jeepchievous]

Dose the rear window function work on the remote? I’m looking around and I only see compatibility is for a Toyota Camry On eBay. Send me a link please. I have the same 4Runner 2004

[@tommyho6437]

Can I get the key to cut from like Home Depot or ace hardware and still will work? Or it’s a dealer cut?

[@philsteph0304]

Thanks

[@diounly5102]

Got it to work but when I’m done with the steps and the car cycles twice and see it cycle once for you. If it cycles twice so my car have to many remotes on the car?

[@womackke]

does the fob work?

[@diounly5102]

Yeah I think it does. After the last step I synced the remote than press the lock one more time to see if it locks and it locks and unlocks twice ( this the second try after syncing the remote before I opened the door I kepted on pressing the lock button on the remote just to see if it works on the last step a few time before i opened the door and car resets. It’s would just lock and unlock twice when I press remote before door opens and remote don’t work again) but I should Just lock and unlock once when you pull the key and once after syncing remote but it cycles twice for each of those two steps. I might have to record it. If this doesn’t make sense but yeah

[@kirkmathews5706]

@@diounly5102 did you figure it out? I have same issue. I’m brought an old vehicle back from the boneyard, the battery was dead. The alarm was very tricky at first and would not allow car to start, but I eventually got it started. I think that process did something to immobilizing system.

[@jayseee1284]

Does this will work on toyota 4runner 5th?? Thanks same progress?

[@frankygaudyskybeautyspa3925]

Excelente ❤ thanks 🙏

[@ariasbeka]

Thanks man!!!!! Worked

[@dukedub]

I’m the only one here that can’t seem to follow this 😂

[@edgardarevalo2388]

Un millón de gracias por tu procedimiento, me funcionó muy bien.

[@josebarragan7603]

It works thanks

[@michaelfederlin7825]

Will it work with a 2008?

[@womackke]

That was a transition year, but if your key and key fob look the same, yes

[@michaelfederlin7825]

@@womackke they do look the same so I will have to try it thank you

[@MikeDaddy303]

U have to hold lock for 1-2 sec. Not just press it!!

[@TheLansang]

Did the rear window button work with this program?

[@womackke]

Yes works perfectly

[@TheLansang]

@@womackke thank you.. had a hard time with Homedepot and Walmart duplicating my keys.. they saying they are not liable blah blah blah. They can duplicate but they wont. Ended up paying a local shop $5 each and it was really fine paying. Just ranting about lazy workers from homedepot and Walmart

[@womackke]

@@TheLansang yes they are idiots I'd recommend going to an old fashion hardware store or dedicated lock store

[@showmequick2245]

Thank you

[@vinnymorg]

I have a 2007 and when I followed these steps, after I press the lock button at the end the locks cycle twice instead of once. And then after I open the door, the remote doesn’t work. Done this like 5 times now and starting to get frustrated. Any help would be appreciated.

[@JeffreeRamirez]

La frecuencia del control está mal

[@joeysmith4515]

Worked on my 03. Rear window open with remote but doesn’t close. Any suggestions?

[@womackke]

You cannot close the window on a 4runner with the remote unfortunately. You remote is working properly

[@fromtheheart4799]

You can close window with holding the key in trunk at turned position.

[@Food-is_Life]

Hi everyone so after the new key has been chipped will it ever be able to get I chipped from the 4Runner? My questions is pretty much since these are some cheap aftermarket keys I just bought from EBay will they ever malfunction and not be programmed after awhile or is it chipped forever? What if you drop the key into water will it work again or will it short the key out? Asking this because I’m hiding it outside the 4Runner for spare/lock outs and scared that if it’s sitting outside for awhile or get wet it might not work? Thanks guys!

[@womackke]

The programming actually programs they key to the car not the car to the key. Basically it let's the car memorize the keys rfid

[@bosco.the.savage]

I tried this and it goes into programming mode (1:09) and seems to program to the car (1:30). But when using the the first time (1:42), nothing happens. what might be wrong?

[@womackke]

The double button push for 2 seconds can be tricky and particular

[@blaiseingram7214]

How did you get the key cut?

[@womackke]

Take it to any locksmith or key maker

[@sarbeliolara156]

When you took the key to get cut, did you take it already assembled?

[@womackke]

No

[@womackke]

Dont think it matters though

[@Broseidon09]

How do you program the rear window?

[@MrPelonGrande]

I need to know too please! Programming was a snap but rear window doesn’t seem to work

[@ChangJitsen]

The back window button programs automatically like the other 3 buttons (lock, unlock, and alarm). If your window isn't rolling down, then use the button on the dash to roll the window down and up. The button on the FOB only works when the window is all the way up. Sometimes you have to roll the rear window down and up with the button on your dash to make sure it is seated all the way up. When the window is all the way up, the button on the FOB should roll it down like normal. This applies to the factory FOB too.

[@bookeetime9796]

P

[@salehalgoraed8498]

I bought a usd 2007 4runner. It comes with two remote controls. I reprogram one of the remotes for another car. Now the remote lock and unlock the tow cars. My question is How can I rest the remote to use it for one car? I hope you help me i will be grateful.

[@womackke]

You cannot reset the remote. The remote always stays the same. It is actually the car being programmed to remember that remote. What you will Have to do is reset the keys on one of the cars using the master key. This will delete all the remote memory the car has stored and add what you want

[@salehalgoraed8498]

@@womackke thank you very much I have the master key, but what are the steps to do it?

[@shawnmcdonald55]

If you do this will your old key still work too? I only have 1 key as it is

[@womackke]

Yes

[@womackke]

What color key do you have? The black one that opens and locks the glove box? That is the main key the grey is a valet

[@shawnmcdonald55]

@@womackke black key only. And it has to be that exact sequoia key correct?

[@womackke]

@@shawnmcdonald55 that's perfect and yes

[@borp6912]

Is there a cheap programmable key fob available that looks OEM?

[@womackke]

Yes

[@TheNiconi81]

excelente funciono😀

[@RepentGFX]

if i dont have a remote will this work?

[@womackke]

Yes

[@iiRoche]

I got mine to lock and unlock the car remotely but I can't turn my car on when I turn it in the ignition. All the dash lights come on, same with the stereo. But the engine just turns over but doesn't turn on.

[@womackke]

Watch my other video on programing the key itself its separate programing from the remote

[@iiRoche]

@@womackke Ayye, look at that. It worked. You should put that and a link to the video in the description for the morons, like myself, that decide to not properly read the title to this video.

[@AshleyAniston0043]

@@womackke are you saying that if it’s not programmed it won’t turn? I bought a similar key and got it cut, but when I put in the ignition it’s blocked.

[@womackke]

@@AshleyAniston0043 No, it would still turn just fine. It sounds like the key wasn't cut well

[@lukesalazar4170]

Please help. I do all the steps correctly but afterwards the key fob doesn't work anymore.

[@kirkmathews5706]

Me too. Did you find a resolution ?

[@Jake-jd7bd]

That last step, when I hit the lock button, my locks cycle twice and my key fob won't work. What am I doing wrong

[@caliman9991]

Did you find an answer? Mine are doing that too

[@lanGPr]

Same for me

[@kirkmathews5706]

Me 3

[@n3m3sis2]

link to the key would be great. thanks

[@womackke]

www.ebay.com/itm/For-Toyota-4Runner-Sequoia-Upgraded-Remote-Key-Fob-HYQ12BBX-HYQ12BAN-4D67-Chip/293312431351?pageci=525c4c05-e6a6-40e5-bf2d-182523dbed2b&epid=1339572008

[@Gleamtalk]

Does it work for the rear window also!

[@womackke]

@@Gleamtalk yes it does

[@n3m3sis2]

@@Gleamtalk yes

[@TRMissner]

I'm missing how to attach the key blank to the key fob, can anyone else who's done this let me know what I'm missing. Thanks

[@bradybrooks3625]

Did you ever figure this out cause I need to know too

[@ItsRigby12]

There is a roll pin on the key blank that’ll need to be drove in and it’ll hold the fob and blank together

[@n3m3sis2]

So I get to where the buttons have to be pressed at the same time and the lock cycles twice and not once and the remote doesnt work.

[@womackke]

Make sure you are pressing at the same time hold for 2 seconds or so. Wait for a few seconds and press lock

[@n3m3sis2]

@@womackke it worked thanks

[@rdljiii]

Same problem locks cycle twice instead of once, can’t get it to work.

[@kirkmathews5706]

@@rdljiii me too. Did you ever find resolution ?

[@nhanhsuakhoa5213]

Có được đâu

[@Emmanueladeshinaa]

It not working I don’t know y

[@womackke]

Make sure you are following the instructions EXACTLY

[@Emmanueladeshinaa]

womackke I’ll try again

[@Emmanueladeshinaa]

womackke dose is have to be a 4tunner key fob or anyone

[@womackke]

It has to be that exact key fob. Does it look exactly the same? Other work on different frequency

[@Emmanueladeshinaa]

It the same key I tired 2x it sorted worked when I press the lock button it dose the lock cycle 2x times and it didn’t work

[@jaacksun4674]

You are a G