Рет қаралды 2,291
in this video, we will be going over how to install a led smart steering wheel from start to finish.
IMPORTANT: the gt86 has no stable ground at the steering wheel, you must add a ground connection at the clock spring and wire it to the chassis. otherwise the led display will turn off as your steering left and right.( display restart when moving steering wheel)
what you need:
- nitrate gloves
- knife
- 10mm wrench
- 17 mm socket and ratchet
- heat shrink and solder
- philips screwdriver
- small flat screwdriver
- zip ties
- patience and flexibility
+ Multimeter is good to have
tourque spec:
steering wheel 39nm
Customisation:
Steering wheel Password is 1234 as default
IMPORTANT:
Do not overtighten the small screws on steering wheel, they thread into aluminium and strip easily.
Music:
Epic Motivational Trap Beat | ENDGAME by Alex-Productions | onsound.eu/
Music promoted by www.free-stock...
Creative Commons / Attribution 3.0 Unported License (CC BY 3.0)
creativecommon...
Tech Success by Alex-Productions | onsound.eu/
Music promoted by www.free-stock...
Creative Commons / Attribution 3.0 Unported License (CC BY 3.0)
creativecommon...
The Way by LiQWYD | www.liqwydmusi...
Music promoted by www.free-stock...
Creative Commons / Attribution 3.0 Unported License (CC BY 3.0)
creativecommon...
Voice of Earth by Alex-Productions | onsound.eu/
Music promoted by www.free-stock...
Creative Commons / Attribution 3.0 Unported License (CC BY 3.0)
creativecommon...
Legal: I am not responsible for your actions and take no responsibility if you mess up.
I try to advise to the best of my knowledge.