GuliKit King Kong 3 Max - Disassembly, ZR trigger replacement, ABXY face buttons, Reassembly

[@strazfpv7043]

Thanks for the video, very helpful. I had a squeak on my right trigger... the spring leg was popped on one side. Placed it back and all ok now. I found it very easy to remove the board by removing the sticks. To put the board back easily, put it before installing the right trigger (left one is partially covered by the PCB, but the right one can be removed and installed without taking out the board).

[@muramasa5999]

for anyone who has this controller , i recommended getting some krytox 205-g0 and lube trigger hinges and spring. Makes it smooth and remove creak noises.

[@diegosalazar1095]

thansk bro you was really reallly helpful, appreciate you maked this video

[@vanessamaldonado5877]

The mechanism on these triggers is really fragile, I got mine broken too, apparently it was factory overtighten and it broke the hinge retainer part, Gulikit really should sell spare parts.

[@jamesjason7533]

Same happend to me bro? What did u do?

[@vanessamaldonado5877]

@@jamesjason7533 Return it, thankfully it was within the 90day period of free returns, the seller offered a replacement trigger, but only after I already iniciated the return claim, I had been messaging the seller before with no answer, so I was not interested in a replacement part anymore.

[@mmLaugh4u]

Same to me week ago​@@jamesjason7533

[@vanessamaldonado5877]

@@jamesjason7533 Return, it was under the 90 day period to return the product still.

[@Snowgenesis]

ayoo, just wondering do you have any link or know if there's any shop that sells kk3 max triggers replacement? materials are very fragile

[@teukugennaro2949]

yes brooo i need that please

[@leonardocardenas5523]

Please Bro, where did you buy the spare parts for your ZR?

[@inclinerd]

@@leonardocardenas5523 I got mine by sending a message to GuliKit’s official AliExpress storefront, they sent me the replacement parts for free

[@tttomtxhc]

Why did you have to remove the PCB to replace the trigger? The screws are clearly visible above the button/sticks board. My trigger just broke after very light use. Literally popped out I assume cause the spring wasn’t seated properly. So there are 2 springs per trigger???

[@revanzafares9636]

where you buying ZR trigger button. Plis drop the link broo

[@inclinerd]

@@revanzafares9636 GuliKit sent me the replacement parts free of charge when I contacted them through AliExpress chat and sent a video of the controller. I don’t see a listing on their Ali page to purchase spare parts though, you might need to ask them directly

[@genreplays60]

my ZL trigger is done where can i get a replacement ?

[@hermierey4219]

Up

[@teukugennaro2949]

are you already got replacement bro

[@genreplays60]

Nope I just got a thunderbot controller I did get in contact with the company even made me make a video and send it to them in the end they never send me nothing

[@banglana]

one of my ZL trigger broken, i did glued that part still not strong enough to stick. How can i get replacement?

[@banglana]

i am really sorry, didnt realize that u said u got these replacement from the store u used to buy this controller

[@hermierey4219]

Up

[@teukugennaro2949]

are you already got replacement

[@banglana]

@@teukugennaro2949 no unfortunately

[@caltesss]

My thumbstick broke I need a replacement. May I ask what compatible thumbstick can fit?

[@beaconing7689]

This shitty trigger will be done in couple of months, because they use the same trigger from gulikit kingkong pro 2.

[@josephluz2036]

hi bro, just want to ask if the analog sticks can be re aligned, my copy has a misaligned right stick, its not dead centered like the left one. thanks mate.

[@Raikos100]

Try doing the calibration method. It resets the center.

[@jwags24]

Aaaaaand i tore my ribbon cable. that thing is tough to take out.

[@ExecutionerDan]

One of the back paddle buttons is getting mushy. I see its plastic so its bound to happen but after only a month is annoying. Wish theyd go with a definitive version of static paddles instead of leaving it up to us to pick and choose on the fly. They need a permanent solution.

[@NamNguyen-vu2zj]

help, i unknowlingly put the swap the A and B button now he A button is too deep i cant remove it, what do i do? i just bought the thing

[@FMU07]

Same man 😢

[@FMU07]

I found the solution but it's a bit nasty, you need super glue and you need to apply some to the button and stick your finger on with a glove or something

[@MrBazooka301]

I just got replecment parts for the triggers on mine been updated now to a double torsion spring

[@chanchan6734]

where did you get them parts?

[@BongoisaPyro]

So this dude is Tweakin out you absolutely don’t need to remove the pcb board if you’re just replacing triggers the screws are right out in the open just unscrew them sunsuvabitches and boom done swap in the new ones DONE

[@KuraiAether]

I can't bring out the trigger plastic because of the PCB, how did you do it?

[@bento9858]

Hello, My A button is keep triggered if i hold it.. And if the A button pressed 1 time its triggered 3-4 times.. How to fix that? (Sorry for my bad English)

[@o_o3557]

same problem what did you do? did you fix it?

[@bento9858]

@@o_o3557 yeah, i fix it by resetting the controller.. Press the gear and minus (-) at the same time.

[@bento9858]

But now i have a new problem, the L button (L1 on PS controller) is broken.. When i press it nothing happened.

[@o_o3557]

@@bento9858 bro i know now to fix it press mid button(the gear button) then the letter that is rapid firing I think (only a guess) apparently its a setting sometimes the manufacturer accidentally trigger or maybe even the user

[@o_o3557]

@@bento9858 did you drop it?

[@frankthomasgonzalezstolk7603]

my conteollre dorsnt tuen on any more you should have said that it has a secure before anything else

[@muS5s]

funny music