Gullwing Reverse Longboard Trucks Rider Review - Tactics

[@thomasbrooklyn1820]

Good explanation in terms of covering all the pertainent bases. Thanks.

[@xveemon1]

I have a pair of those and i love them!

[@KoiKoy109]

lower rides mean more stability right

[@mauropache]

i have this trucks from 2 months, and i really love them. BUT i feel them a little heavy for freestyle. Good video, they are excellent trucks =)

[@mr.jamster8414]

longboard slides look so much more fun than skateboard slides.

[@GhettoFabulous670]

isnt this the charger 2's from gullwing?..

[@coober965]

is it alright to put a sidewinder on one end AND a reverse on the other?

[@tinymooshroom1287]

Have you reviewed the Paris V2 trucks? If so, then do you prefer the gullwing reverse over those?

[@tinymooshroom1287]

thanks!

[@tinymooshroom1287]

did you have any problems with the hangers bending? I read online that quite a few people had problems with previous gullwings where the hanger would bend after a while

[@tinymooshroom1287]

thanks!

[@brennonh468]

What's. Better

[@TheReal_DeanD]

If you're a heavier rider is there are harder duro bushing to replace the 89a one? What are some barrel cone bushings that re recommended direct replacements?

[@davidrileywilliams5346]

Can you grind with these trucks? Or could you recommend any longboarding trucks for grinding? I wanna do freestyle and grinding would be a ever so often thing because I still want to be able to carve and just have a smooth ride. Basically I've never bought a longboard and I need the perfect setup. I planned on getting the arbiter 36 DK cause of the double kick tail. I just really need help on what would be best.

[@MegaZobs]

What's the weight limit for those trucks ? Thanks

[@benwong3244]

how heavy are the trucks? I'm looking for a lighter truck with good carvyness because my ORIGINAL S8 is too heavy

[@sunnyparkjoo831]

Can you tell me the weight of this trucks? I have charger 2, but a bit heavy. Hopefully this trucks are lighter than charger 2. If you can, tell me also the weight of the charger 2; so that I can compare them. Thanks, PS: I have Munkea as well.

[@jackvonarx3781]

Is it better to have one king pin or two 4 downhill

[@codyc7372]

How would you compare these to 44 Cals for downhill?

[@boscoserranovelasco3302]

How do they feel for freestyle? Are they heavy? Prone to bending?

[@jeremykight2309]

Do you think these would be good with venom bushings

[@Creature0022]

What would happen if you put 10 inch trucks on a 9 inch board

[@tacticsboardshop]

I mean, you can technically ride it like that, but it's not ideal. They would stick out 1/2 an inch on each side and you might accidentally kick the wheel when you go to push. It's definitely better to have trucks that more closely match the width of your deck.

[@Peekaso0]

what kind of bushings does gullwing for gullwing reverse?is that Tall bushings?

[@blakeyoung690]

Would I have to worry about wheelbite with 65mm wheels and 1/2 inch risers

[@blakeyoung690]

Thanks man

[@Mrrabott]

Do you flip both trucks? or just the back

[@Mrrabott]

Thanks!

[@count_of1310]

Both trucks

[@kinglyrik9513]

can you put those trucks on a street deck

[@tacticsboardshop]

You could definitely mount these on a normal board if you're wanting some big ol' trucks for your cruiser. They're not ideal for tricks or grinds though. 😄

[@aikenalicando]

would this fit chubby/tall bushings?

[@3XCODFANX3]

can you run talls

[@3XCODFANX3]

Thanks

[@alexchristen8209]

Can these fit tall bushings?

[@kracksmith4ejm1]

can these trucks fit sector 9 drop through board such as the side winder? i like to replace the double king pin trucks

[@owljoseph]

Not on the Sector 9 Horizon I have. Didn't fit and a lot of those Sector 9 decks are made for the sidewinders.

[@webermendes4311]

Do you prefer the gullwing reverse or Paris v2 ?

[@GnarkillSlayerGwar]

Weber Mendes a lot of people I skate with would say the V2 but I personally prefer the GW reverse.

[@webermendes4311]

@@GnarkillSlayerGwar thanks for answering , but why do you prefer the reverse?

[@GnarkillSlayerGwar]

I own a set of Skoa Vapor precision trucks and I love the response and lean of those trucks. The Reverse feels very similar to the Vapor I thought. It’s a really well made cast truck I thought. Paris felt a little dead in comparison.

[@webermendes4311]

@@GnarkillSlayerGwar Thank you my friend, that was all I needed to hear to make my decision. You helped me a lot, thank you very much.

[@GnarkillSlayerGwar]

Weber Mendes No problems man, thanks for the reply and update. That is my honest opinion and glad it helped you. Hope you love them like I do.

[@webermendes4311]

what degree they are after flipping the hanger?

[@GnarkillSlayerGwar]

Weber Mendes it doesn’t change the degree just gives it negative rake. Makes it feel more dead.

[@webermendes4311]

@@GnarkillSlayerGwar thanks for answering

[@moritzlieber1870]

Which Board Do you habe ridden ?

[@_jqy427]

.

[@Blizzyblakexxx]

I'm just learning how to skate and I don't know if I'm putting this on right if possible can you at least do a video so we can see if possible can you at least do a video so we can see how to do it

[@DaveonGrave]

How are these on a drop through deck?

[@DaveonGrave]

Thanks. I'm currently riding Randals on a drop mount, but I really like the features of the Gullwing Reverse.

[@DaveonGrave]

Check out my profile picture, it's me with a set of Gullwing Pro trucks on my first longboard over 30 years ago.