Guohetec Q900 SDR Transceiver

[@wesleywatson3925]

Hello Ben The 2 metre band has been narrow FM for 20 or more years now. This is because there isn't that much room on 2. 70 Centimetres is a wider bans ( 10 MHz wide ) so there fore wide FM can be used. When doing these tests make sure you are both using either wide or narrow FM Try the FM test again using the same mode and see what you get. If you are still getting the same result then there is something wrong. Nice video all the best Wes.

[@philipwells2793]

Excellent video and very helpful. The producer tested 4m band on transmit, it had full current draw and a very small o/p power, so it really isn't designed for 4m.

[@m7frs272]

Thanks Philip, glad you found it helpful.

[@itrdatube]

Long press the (1) button on the key pad to change between uppercase , lowercase , numbers and symbols.

[@damonschaefer1773]

@@itrdatube OMG, how did you learn this?

[@richardevans5921]

Absolutely superb video Ben, I could certainly find my way round the basic radio now from your explanations and demos in this video, hope you have fun and keep the videos coming, 73 de G0VCW

[@m7frs272]

Thanks again for your help with testing Richard 👍 73

[@kd5inm]

From my understanding you can charge the internal battery from the USB-C plug on the back

[@vidcreator5276]

Ben - Very well done video. I've been hoping there would be more videos pop up about this little radio. I've had one of these ordered for myself and it just arrived this past week. I'm hoping for lots of possibilities for this radio especially for portable operations. If you use a USB keyboard plugged into the back of the radio the entry of your call sign will work very well. Keep the videos on this radio coming. I'll be waiting for them. Thanks! Gerald - KG0VA P.S. I see you have couple more videos already.

[@m7frs272]

Thanks Gerald. Glad you found it useful. I'll certainly try and upload more when I have time. I did wonder about the keyboard, I've tried it for CW but didn't try it for the callsign (I may even do a short video on it) Enjoy the radio, 73 for now.

[@1OFGODSOWN]

It should be Illegal in the USA since it also does the CB Band.

[@TrullaCæmentarìí]

@@1OFGODSOWN 😒

[@1OFGODSOWN]

@@TrullaCæmentarìí If you or anyone else supports the ILLEGAL use of Amateur Radios on the Children’s Band then you are part of the problem. We as Amateurs should support the LEGAL use of gear on All Bands and fight Against All gear that doesn’t. W4KVW/ WRMX520 👎🏻🎙

[@lampshadesneeded]

@@1OFGODSOWN a ham owning a license is allowed to own equipment that can transmit on any frequency and it is his remit as a licensee to not transmit out of the bands he is allowed to transmit on. Not all people are in America and subject to FCC America is small

[@DanielHallmark]

A video on using hf digital modes would be appreciated. FLDigi/FLRig and JS8Call if those can be made to work. Thanks for this overview video!

[@frankENZC]

Thanks for the video. An interesting little radio. Do you know if the NR is functioning? Also. is there a way to adjust the tone on transmit? I thought the mic sounded a bit Basey. Upgrading the mic might be a good idea. 73 de WA3RSL

[@foxonem7dfh257]

What's the LAN port for?

[@tallpaulmagic]

Thank you. My radio hasn't come in yet and I'm very anxious to try it out. When I ordered it, I wasn't given an option to get the GPS or DMR module. Are those things I can order later and put in myself... Have my electrical engineer friend put in for me? If so, do you know where I would order them?

[@youtubeaccount931]

Cool, I had my eyes on this radio.

[@frankbaron1608]

a cuple of questions. does software like sdrsharp see it and control it, and how do you se the ft8 on it?

[@MrBonez208]

What is the maximum ssb transmit I.F. Bandwidth capability of this rig? And what receive I.F. options second? Other modes if bandwidth. Does hf or vhf uhf effect those settings? Btw does this rig tx on 23cm ssb or fm? Being that 2ghz roof and all the options are available… Thanks!

[@gerrykavanagh]

Great video Ben, thanks. Couple of questions if I might... is mic gain stored per band, or do you need to changed it every time you move to another band? Also, have you tried DMR?

[@Frisky0563]

My thing with this radio is where can I buy it without being scammed? Thanks for the video!

[@foxonem7dfh257]

Set your callsign by looking at the keys on a phone or google it for the layout of a mobile keypad

[@GIPSteinbeis]

Hi Ben, Ive just got my Q900 V4 last Friday 27th Sept. .....my experience was not fully satisfactory. My Questions: what about the LAN Connector. switching "Network", there are some IP's...but I didn't see the rigg in my local LAN. How can I connect the Q900 to my windows 11 computer? Either via cable directly (Software?) or much better via LAN. I heard about using the HDSDR Software? How do you connect the Software BLE and FT8 from the Android to the Q900? And what about the Output Power settings. Did this work? best wishes William DF7GT

[@m7frs272]

Hi William, sorry for the delayed reply. Hopefully some of my other videos in my Q900 playlist may help to answer some of your questions: kzbin.info/aero/PLXMfFSysu4iy46lH01Jg6L_XkJw8OWiIi&si=vOZg_WQFfXJiaykC Thanks for watching. Ben de M7FRS

[@gi4fue]

Hi Ben - great video, considering getting one...I see Aliexpress are now offering a v4 model with 4m TX enabled - same price as Banggood who are still selling the v3 73, Charlie GI4FUE

[@ugsisr]

How do you feel about this radio after having it awhile ? I do not see many good reports on the Company itself Thank You ! PS..... You still doing anything with the Quansheng? Thank You

[@m7frs272]

Hi, I've added a couple of videos over the past few months to my Q900 playlist kzbin.info/aero/PLXMfFSysu4iy46lH01Jg6L_XkJw8OWiIi&si=9jwr5_LJIZ7Aca9h The rotary VFO/encoder has definitely made a difference! I should really do a few more videos playing with both the Q900 and the Quanshengs! Thanks for watching & supporting my channel! 👍

[@The_Jas_Singh]

Hello Ben - good video. Can you recommend which antennas you recommend for this radio?

[@m7frs272]

Hi, to be honest it really depends what I'm doing with it. If I'm mobile in the car I just use a 2m/70cms Nagoya for VHF & UHF or the Moonraker SPX-100 for HF. If I'm at home I'm either using the 4 element 2m beam from Moonraker or Diamond V2000 for 2m, 6m & 70cms or 66 foot end fed long wire for HF. Thanks for watching 👍

[@The_Jas_Singh]

@@m7frs272 Great - many thanks. I have an ICOM 7100 which I bought second-hand in 2018 from ML&S for around £700 and it's a fantastic rig. I do have a Diamond V2000 tuned for 2m + 70cm and a HF vertical, but I am setting up a second QTH in a holiday home, so was interested in what you recommend. M7JAS

[@joeframo3347]

Hey they just came out with the generation 4 of that radio the tuners really good in that radio plus it has a lithium ion battery and if you buy it with the modulars in you get a GPS antenna Plus you can work gmrs I think it's a cute radio thank you for sharing your your model yours is the generation 3

[@John_Henry83]

Thanks for this video. I was considering buying this radio from Radioodity. Where it is listed as the qr20. That model does not come with the heat sink wrapped around it. I said WAS considering until I watched a video here on KZbin where the poster did a power measurement on 6m to 80m. The power was all over the place as he switched bands. The worse was 1.5 watts on 6m. I can get more than that with my Baofeng UV-!!!. I guess it all depends who you buy the radio from and what model you get.

[@gi4fue]

John - the Radiooddity qr20 is the v2 version and full of problems

[@damonschaefer1773]

I have this radio, but need to program it with a laptop preferably. How?

[@martinsmethurst6328]

Hi iv just ordered the q900 does it need to be set up or is it ready to go

[@achildrenmile]

Thanks for the video! You can enter the call sign using the menu on the TRX, altough it is far away from perfect. If you enter the call sign mode, you can switch between A,a,1,; by using the number one button. By holding it down, you can switch between the modes. I was able to enter my call sign after fiddling around for a few minutes. 73 de Michi OE8YML

[@robertaldrich2635]

By the way, I've been looking at so many videos and links, totally confused by all the name-changes of the radio (probably due to earlier versions being so buggy) that I finally found this video again and went through it and the manual line-by-line, and I've gotten a lot of it working. Seems I have a bad battery though, I can't transmit at all on battery without the radio shutting down. To top it off, I bumped the LCD screen slightly and the plastic cover cracked! I found a guy named Lewis at Revevis who may be able to get me a new covering without buying the working screen as well. Well, at least I'm having a lot of fun figuring this thing out, but due to the cracked screen I'm sure I can't return it now, as I was considering doing.

[@marksmith8781]

You in yeovil UK?

[@mandh14]

Excellent presentation beats reading the manual lol

[@40858380ma]

You can put in your call by using keyboard via the usb plug

[@m7frs272]

You can but unfortunately on mine it looses it after a few power on's and off's Thanks for watching 👍

[@jasong9695]

What's the maximum tx and receive ssb bandwidth?.

[@marcelomorasca-x6d]

hello this transceiver transmit un 1200 Mhz ?

[@HyperMAX9001]

Should i get this or FT-817 secondhand for portable repater + hf?

[@W4TRI_Ronny]

How does a Keyboard and/or mouse work? Can you change the call that way?

[@steinbeis5380]

73, here Wilhelm DF7GT.....I m using the very good HERMES Lite II on HF.... Im looking for a transceiver also with VHF and UHF.....this could be the Q900. My Question: can I put this Q900 into my LAN like the Hermes. Im using SDR Console and better the SparkSDR with integrated FT8 Mode. Thanks for answering...best wishes from the Black Forest Wilhelm DF7GT

[@m7frs272]

Hello Wilhelm. Apologies for the delayed reply. I've been looking to see if the Q900 is supported on SDR Consol. It's not something I've done or can find any information on, so I really can't say either way, yes or no. The instructions suggest it can use 3rd party application via the USB. If I can find out anymore information then I'll let you know or even make another video featuring the Q900, as I've not done much with it for a while. Thanks for watching and supporting my channel. Ben, de M7FRS. 👍

[@dschaefer6454]

Can you go over how to program the radio's memory channels using a computer? It their software called CNSDR to program it?

[@motorcyclesandthings8633]

Thanks for the excellent video, however don’t think I would fancy one , a lot of button pressing , a pain in the arse , cheers shane uk 🇬🇧

[@rayjackson3798]

Sorry Ben, I have had two of these radio and I was most impressed but sad to say there were many problems, firstly they were both deaf on HF, one had no UHF Band, neither would connect to my W10 computer and I am still waiting for details of the drivers, the good part is after a bit of confrontation both dealers refunded my money and let me keep the radios, what does that say, well I am still working on it.

[@m7frs272]

That's frustrating, but at least you have a couple to experiment with. Glad to hear you were able to get a refund 👍

[@joergfritsch]

Max output is 20W. So you need to have a 2000+ USD amplifier for it. Isn't it?

[@robertaldrich2635]

Where can I find a support link, or an active group re: this radio for lots of little questions I have? And by the way, yours is the best video so far after a long, fruitless search for answers!

[@m7frs272]

Thanks Robert, glad you've found it useful. There is a Q900 Facebook group and supposed to be a WhatsApp group chat, but I've not been able get that to work. This radio is new to me but if there is any specific questions, I'll try and find out answers for follow-up videos.

[@Masirah1]

Nice job

[@m7frs272]

Thanks 👍

[@alanjames4526]

Hi, Ben. great video! I know you probably will but I am very interested in digital modes (ft8, js8call, psk31) and cw decoder and cw via keyboard. Thanks a bunch for a wonderful video! Alan KZ6B

[@m7frs272]

Hi Alan, Thanks and I'm glad you enjoyed the video. I've uploaded a few more on the Q900 including running FT8 via an app called FT8CN (although not very successful as yet) I will try and do some more short videos, including the topics you mentioned in the future when time permits. If you haven't already then please consider subscribing to the channel and click the bell to be informed when I add future content. Thanks again and best 73, Ben de M7FRS

[@damonschaefer1773]

I especially want to do JS8Call - is there a way to do it natively on the Q900 itself?

[@Sys-Edit0r-1995]

Can this do or be modded to do 220Mhz?

[@acestudioscouk-Ace-G0ACE]

Thanks for such an interesting video. Great shame it doesn't transmit on 4m, that's dealbreaker for me. As it's highest frequency is the 70cm band, they can't really call it "all band".

[@davidlucas6837]

v4 does on 4m, just picked one up, time will tell how well it does 4m! G8XDD

[@richardmillican7733]

It's a very good looking set. Pity it has no vfo spinner. That'd be a nice touch in my opinion. That right angled mic plug could be a bit of an incumberance! Informative video.

[@joelee24]

This is a very nice radio, the only thing I don't like is no knobs only push buttons, I can imagine how tiresome my fingers will be simply but changing frequency and volume.

[@landytravels9427]

No “VFO” knob is a deal breaker for me!

[@dschaefer6454]

They could totally fix that with an inexpensive USB VFO knob. For now, I just use the Android app. It makes it much easier to manipulate the settings.

[@johnwest7993]

It isn't an "all-band" rig.

[@chopchop3464]

nobody ever tests the transmit

[@m7frs272]

Maybe I'll do a further video testing the TX power and RX sensitivity at some point. Thanks for watching 👍

[@chopchop3464]

just a half ass review with no real facts

[@W4DNQ-AmateurRadio]

They are getting higher and higher in their pricing... To give an example, a real ham builds, like I built the original MCHF.... Not a CHINESE knock off!

[@simeonfranc]

😢 it's not true, the world change my friend. Nowadays many ham radio like china radio. There are portable HF Chiness radio today. 73's HH2SEC Simeon

[@djmadmaxs]

Rig full of bugs and hardware with lot of issues

[@johnbelcher7164]

Another Chinese job Shitcan it