GX CS4 pcp Compressor Upgrades Hour Meter & Power Supply Mount

Runleader Digital LCD Hour Meter with Backlight
The Counter
www.amazon.com/gp/aw/d/B0C2XZ...

[@jamesstergar7784]

I just got a CS4 and this is my first project on the list. Thanks for taking the time and making this video.

[@usmc6157]

Well done…good vid!

[@_ROD98_]

Is it possible for you to show the whole wiring process please ? it would be muchly appreciated

[@titiki1000]

unfortunately I have already built it. I would have to tear everyting appart and redo it. If you follow the video it is pretty easy to do.

[@terrycrissman7392]

Isn't there a 110/220 v switch? Can it be ran on 220?

[@titiki1000]

No it is strictly 12volt. The motor that drives the pump is 12volt. If you run 110/220v through the motor you will see fireworks... lol. The power supply/transformer that provides power to the motor that drives the pump can be run on 110 or 220 volt. There is a switch on the power supply only.

[@TangDynasty1983]

Thanks a lot for the video! Wish you've recorded the whole wiring process...Is it possible if you can give links to all the parts? Thank you.

[@titiki1000]

www.amazon.com/gp/aw/d/B0C2XZ3SYV?psc=1&ref=ppx_pop_mob_b_asin_title

[@TangDynasty1983]

@@titiki1000 I just bought the meter and the CS4, can you share what gauge of harness I should get? Thanks so much again.

[@titiki1000]

20 gauge silicone wire is what I used, but anything from 18 to 20 gauge will work just fine. The amperage draw is very low to worry abou it. @@TangDynasty1983

[@davidsettles5706]

Thank you. I have had no luck finding that hour meter, most are power and ground. Please provide link to the one u used. Thanks again.

[@titiki1000]

www.amazon.com/gp/aw/d/B0C2XZ3SYV?psc=1&ref=ppx_pop_mob_b_asin_title