GXT 2555R on PC 4000 - Monster Demolition Equipment

The largest demolition equipment in Australia, McMahon Services will be using this unmatched GXT demolition shear and scrap shear combination to demo an iron ore plant.
#demolition #demo #scrap #scrapyard #scrapprocessing #recycle #recycledmaterials #mobileshear

[@xCraziiPanda]

Been running shears in the scrap recycling industry for 15 years. That is very impressive to see such thick steel get cut.

[@GOLDSMITHEXILE]

@3:05, really smart how the operator keeps the tip just to say shut, so the metal drops down for a second bite without dropping to the floor. do these type of huge shears become less efficient when the cutting edges get nicked and blunted? Do they need replacing every week?

[@GenesisAttachmentswi]

Thanks for your interest in Genesis Attachments. Proper maintenance of the cutting blades is required for optimal performance. Blade rotation extends blade life and improves cutting. Shimming to maintain blade tolerances helps prevent jamming. How often the blades need to be replaced depends on factors including what material is being cut, how many hours per day/week the shear is operating, and how well the blades are maintained.

[@aghowrath]

Fab cutting tool delivering about 5500 psi.also 400 tonne Komatsu Beast

[@bettyprice6316]

That's huge.

[@rolfo1065]

Only for the construction site, much too slow and too expensive for mass scrap production but an impressive machine.

[@DjWellDressedMan]

MUSIC: Sounds like a cheaper version of TOSCA / K&D

[@paulholden5422]

How much is a set of blades for that machine.

[@GenesisAttachmentswi]

Hello, your local dealer will be able to assist you. You can find that dealership at www.genesisattachments.com/dealers If there isn't a dealer in your area, please contact the Genesis parts department at 715-395-3488. Regards

[@frankbertels1119]

here is frank from germany by the film you can see by min 3.36 thats metall is not cutting my english is not perfeckt it is demolishit by welding

[@MotoScootMech]

they probably shouldn't have filmed that one cut, but every other cut was made with the shear!!

[@MrDriftspirit]

Das Video hat einer Zusammengeschnitten, der sich mit Software auskennt, aber nicht mit Metalverarbeitung und 10xl Hydraulik Schrottscheren... D.H.,wie moto scoot mesh schon schrieb, diese Sequenz bei 3.36 gehört nicht in die Präsentation am Ende des Videos zur Schnittleistung der Schrottschere, der Cutter hat die Brennschneidkante mit ins Video genommen, die zur Aufbereitung des Trägers für die Demonstration galt. Bei der MAterialstärke war der Träger vorher mit Sicherheit nicht bloß3m lang, wie hier für die Demo...

[@olegprofit]

Наглядно видно просчеты инженеров. Вся проблема в том что они металлолом видели только на картинке. Материалу некуда деться.Его сжимает. Маленькое окно для отрубленного материала. Вот поэтому вторую балку не смог прорубить с первого раза.

[@robertswift8708]

Too slow

[@johngardea625]

No dip the hydr oil in that BIG ASS MACHINE has to has to get their in no time.

[@BritishEngineer]

1:21 it’s so awesome how the water hammer in the lines make the hydraulic hoses move

[@rachidboutoughmas7642]

Wawww se jeant thanke you very match forever goode job 👍👍👍👍👍💪💪💪💪💪💪💪🇩🇿🇩🇿🇩🇿

[@RovingPunster]

It cut that I-beam like buddah. 😂

[@vannhatnguyen9958]

hello, what is the largest and smallest capacity model GXT255? What is the maximum and minimum cutting force?, what is the size of the largest cutting object? and how much can be fitted to the excavator? thanks!

[@GenesisAttachmentswi]

Hello, are you inquiring about the GXT 2555?

[@jammabubbly522]

Oh shit!

[@edersonsimplis5127]

Estrago o bico de corte

[@shitosawpasterski2978]

steel monster/beast.