Gyroflow vs Reelsteady GO, GoPro 6 Naked, tricky RAW footage

[@alecz3740]

I used to get super shaky reelsteady output when I flew certain props, but adding a lot of sync points in places where the camera makes a quick rotation seemed to fix a lot of the problems

[@MateuszmatexonyG]

If the film is not properly stabilized in RSGO, what is the point of making a comparison video of the Flow gyro with RSGO which is not there? Non sens

[@M.Tops33]

Thanks for the point and the comment. This video is only about this specific footage. Same gyro data same video... RSGO can't stabilize the footage no matter what I do, the video show the best I can get from RSGO on this footage. In Gyroflow I have the possibility to select precisely the synchronization point between the gyro data and the video and the final result is not perfect but better. RSGO is much easier to use but sometimes it's difficult to get the right synchronization point especially with video from my Gopro 6 naked. In this case I use Gyroflow.

[@MateuszmatexonyG]

@@M.Tops33 You probably need to use a soft mount, then the RSGO will handle it without any problems and the effect will probably be better than the Flow gyro. As for the gyro Flow, I saw the way it was done and I don't know if I would like to have so much fun with it 🤦‍♂️ definitely a nice solution for cameras other than gopro, but too much fucking for me

[@M.Tops33]

@@MateuszmatexonyG I tried soft mount on my gopro naked but the result is not good. The camera is too light. With my Gopro Session 5 and soft mount the result is nice on RSGO.

[@MateuszmatexonyG]

@@M.Tops33 Therefore, it is not the fault of the program itself, but the type of camera and mount used. RSGO is dedicated to original gopro cameras. The stabilization comparison will make sense when you compare the properly rendered RSGO with the Gyro Flow because your comparison video does not show the stabilization difference in the full range of their functions, because the RSGO here did not work at all

[@M.Tops33]

@@MateuszmatexonyG 😐 rsgo can't stabilize, gyroflow can stabilize... yes it's a software problem...

[@WindjumbieFPV]

Interesting comparison 🧐 subbed 👍🏼

[@M.Tops33]

Thanks

[@thiagoamatofpv]

Hey man, with gyro flow i cant do acro moves? I was in doubt of that

[@M.Tops33]

Hi, I didn't try acro moves.

[@mfaizul8083]

great bro..!

[@M.Tops33]

Thanks

[@orbi_fpv]

J’ai bien envie d’essayer mais je viens de me taper 1h de tuto pour la calibration et le tout le reste... et maintenant ça me rebute un peut 😅

[@M.Tops33]

😂 Avec la Gropro 6, il y a pas besoin de faire de calibration de l'optique, tu prends le fichier JSON de la GoPro 7 qui se trouve sur GITHUB. Pour la synchro de la trace gyro avec l'image tu cherches le décolage et l'atterrissage avec un viewer vidéo et tu notes le temps en [s] puis du lance la stabilisation. Perso je double la résolution de sortie (scale 2) pour avoir un peu de marge lors du crop dans Premiere.

[@orbi_fpv]

@@M.Tops33 pour moi c’était pour essayer avec la Sony rx0... je vais quand même essayer ça peut valoir la peine 😅

[@M.Tops33]

@@orbi_fpv dans ce cas je comprends 😀 pas de RX0 dans le GITHUB.

[@importon]

look like you need to flip gyro in RSGO

[@M.Tops33]

I also tried it but it's worse. I have footage with the same quad and camera and the result in RSGO is perfect. I don't know why on some footage I can't stabilize with RSGO. There is not enough tuning option in RSGO and when I send an email to the support I never get a response !