H-King Glue-N-Go Volador - HobbyKing Glue-N-Go Series

[@elijahf111]

definitely think this fits the glue and go series better than yesterdays yak :)

[@elijahf111]

@Jaiden Dayton lookmovie.ag for me

[@nicorossi1149]

May you please suggest us the right setup ? MOTOR ? ESC? BATTERY? SERVOS ? PROP? The item suggested in the HK site are wrong!! :-O

[@Legacy0ne]

Been a while since we have had a weekly update? Or does HK not do them anymore now that James has gone too (sad face) where we at with the Grand tundra, durafly 109, avios Spitfire, Matt's crazy special effects stuff etc...

[@josephcunningham79]

One day my channel will be as awesome as yours great channel

[@Inspire_guy]

One of the carbon fiber rods that goes to the tail is not shown in your video also a little better instructions on installing the side reinforcement for the upper stabilizer and lower stabilizer would have been great

[@calebmorant932]

What is the motor and esc used for this aircraft?

[@Caroline_Tyler]

It's a bit confusing as this build video is at odds with the instruction manual in the kit. The kit has the extra fuse strips underside. The build video leaves out one of the tail carbon strips completely and the model shown appears to have additional carbon rods underneath. Also the recommended motor on the box lid is very different from in the instructions. This all confuses this beginner to 3D planes!!!

[@mthobbies5885]

What's the piece on the rudder for?

[@frwy1]

it's an air brake, mostly used on indoor models to be able to enjoy all the power of the engine but keeping a slow air speed.

[@mthobbies5885]

frwy1 cool makes sense.

[@nicorossi1149]

SUGGESTED SETUP FROM HK'S SUPPORT : Motor: hobbyking.com/en_us/turnigy-aerodrive-sk3-2122-1570kv-brushless-outrunner-motor.html ESC: hobbyking.com/en_us/turnigy-plush-12amp-2a-bec-besc.html Prop: hobbyking.com/en_us/gws-ep-propeller-dd-8040-203x102mm-grey-6pcs-set.html Battery: hobbyking.com/en_us/multist...0000mah-multi-rotor-lipo-pack-with-xt-90.html Servos: 1x hobbyking.com/en_us/hxt900-micro-servo-1-6kg-0-12sec-9g.html 2x hobbyking.com/en_us/hxt500-micro-servo-0-6kg-0-08sec-6-2g.html Kind regards, Mike D HobbyKing Support Team

[@yen1761]

wow.nice..how much is the price..

[@frwy1]

something around 18 or 20 buck (kit)