H3 & H3T Hummer Front Torsion Bar Front Lift

A quick look at how I did my H3 & H3t Hummer Front Torsion bar lift to get rid of the sloped drooping front end of my 2009 H3t in my drive way with standard tools.
*I am not professional, I just enjoy doing the little things that make a big difference.

[@jamesray3920]

I own a 2009 h3t alpha with adventure and luxury package i just replace leaf springs with old man eu spings i notice it lifted mt h3t by 2 inches the old spings gone flat and with my overlanding build has added weight to bed ,now i will need to do same with torsion bars , its too bad no more lift kits available but im happy with my h3t most people never seen a h3t jeep gladiator always looking at me

[@vtecbanger3180]

I own an 06 h3 luxury with a 3.5, I also own a z71 suburban with a 5.3. I love the style of of the h3 and the drivetrain in the suburban. The h3 with a v8 is a perfect rig. You are a lucky man.

[@thatone_daniel]

hey! i saw your comment on Rally Roots video and decided to stop by! awesome content! keep it up!

[@thatone_daniel]

hey, saw your comment on Hairy Tornados video and decided to pop by. hi!

[@hassanjassoma5809]

Very good my friend

[@davidrebello9959]

Gd job love the tips.

[@USMC-Sniper-0137]

Have you any regrets since stressing your torsion bars, and CV axle boots and joints? I also hear you need a front end alignment after. Luckily my 2007 H3 sits nice and level. I did this once to my 1997 Ford Expedition ( also 4 X 4 ) after putting air bags in the rear springs to lift it. All I got was a front stiff ride yet I enjoyed the lift. Hummer IS the real grand daddy of baby jeeps................

[@prime2669]

Thank you👍🏼

[@bigtreesfall]

Thanks man.

[@Crmon1]

Did you need a wheel alignment afterwards? Did your camber change?

[@butchclarke5269]

Thanks for the video! Here did you find those black lug nut covers? I need me some of those.

[@MrEzoperator]

Amazon has everything.

[@eribertoguzman7033]

Hello. Thanks for the video good to know. I really like the views of the h3T haven't had to see one up close just the h3 how different does it look next to one? I am really thinking in buying one but near ne there's non for sale they are about 600 miles the closest one. Do you think the h3t has a different look compared to the h3?

[@MrEzoperator]

Loved this truck. The H3T Alpha is only way to go if you are really looking.

[@JuanMartinez-vd5st]

Dude my dad has that jack, he's I was like 12 when he bought it, im 29 next week lmao

[@MrEzoperator]

My tools are so old!

[@billiebowling7755]

Would have loved to see the axle angle change difference

[@MrEzoperator]

Good point. Maybe when I do the axle upgrade I can take one side down and show the difference in that video.

[@thomasgleeson8410]

Do you change the suspension geometry requiring re alignment?

[@MrEzoperator]

a little but not much

[@Barberry282]

How did you paint your wheels? Powder coat?

[@MrEzoperator]

nothing special. Wheel paint.

[@juggernautherculesgarcia6076]

The tire you measured side was lifted, you’d have to measure after you take out the jack and stand

[@MrEzoperator]

It appears that way but it had not been lifted yet, just in place.

[@RoyFortheWin]

Was the alignment affected?

[@MrEzoperator]

You should always check the alignment after this process.

[@oscartorrentejr3116]

How can you balance the exact same Jack height on each side besides eyeballing by the tires touching the ground?

[@MrEzoperator]

Count the cranks on the wrench not the jack height. Measure from the hub after letting down the jack. Repeat until perfect.

[@brodymiller9015]

I want to lift the front of my hummer to match the rear, but I don't want to turn the torsion keys because it will put a lot of wear on your torsion bars and other parts. I also don't want it to ride terribly which is what happens with all cars that have cranked torsion keys

[@cflip7452]

That ruins the ride but assuming you already figured that out

[@MrEzoperator]

It only affected the ride very little and with good tires inflated properly it rides well and looks so much better.

[@StevieR7]

@@MrEzoperator How does it affect the ride?

[@StevieR7]

@@MrEzoperator Did you get alignment done after you raised it ?