Hafele Self Drilling E-Z Toggle Drywall Anchors

  Рет қаралды 141,093

Hardware Hut

Hardware Hut

11 жыл бұрын

Learn how to install Hafele's self drilling E-Z Toggle. No longer will you need to search for studs or deal with those stubborn plastic wall anchors. The E-Z Toggle makes hanging anything to your wall a breeze.
View this product at: www.thehardwarehut.com/catalog...

Пікірлер: 10
@LuisRamirez-ln3cj
@LuisRamirez-ln3cj 5 жыл бұрын
Thanks. I believe you have to make sure the arrows point up and down to increase the surface area holding the pressure of the weight on the anchor.
@TheHardwareHut
@TheHardwareHut 10 жыл бұрын
It's actually best to simply screw it further in till it falls behind the wall. That way you do not damage your drywall.
@qqkk5581
@qqkk5581 5 жыл бұрын
What is that fastener wheel holder you have at the 0.57 mark? I occasionally would have a use for that.
@kimberlyShursen2015
@kimberlyShursen2015 7 жыл бұрын
You saved my life!!!
@melloyelloguy
@melloyelloguy 10 жыл бұрын
how to remove ez toggle?
@endrei22
@endrei22 5 жыл бұрын
I want to install an ikea ledges picture Self above and below my TV. My only problem is that i have a cat. He sure is going to jump onto that self. Is it strong enough to stand a “cat attack”?
@Capris9x
@Capris9x 9 жыл бұрын
Hi, I noticed that the toggle goes back until it's against the back of the wall. Does that mean the screw you used will just hang out and not be screwed it 100% completely? I'm asking this because I'm installing shelves and I need my screws to go all the way, so do my screws need to be a certain length?? (I have 3/4 inch drywall as well) Thanks!
@TheHardwareHut
@TheHardwareHut 9 жыл бұрын
When you order the Hafele E-Z Toggle Drywall Anchors, a screw is provided for installation. It is best to use the screw provided due to the threading and screw size being a perfect fit for the anchor. The screw cannot exceed 2 1/8" in length, should you try and use your own. The screw will sit flush with the front of the wall when the item is fully installed, the only part that will protrude will be the screw head.
@jerold3777
@jerold3777 10 жыл бұрын
How do you remove this product without tearing a whole in your wall? Thanks.
@FridayNightArcade
@FridayNightArcade 7 жыл бұрын
Just push it the rest of the way through... it will fall harmlessly into the inside of your wall. Spackle up the screw-sized hole left behind and repaint.
The Best Drywall Anchor Plug Inserts // Tested
6:39
Tools That Build
Рет қаралды 208 М.
Which Drywall Anchor is Best?  Let's find out!
17:11
Project Farm
Рет қаралды 6 МЛН
마시멜로우로 체감되는 요즘 물가
00:20
진영민yeongmin
Рет қаралды 28 МЛН
КАК ДУМАЕТЕ КТО ВЫЙГРАЕТ😂
00:29
МЯТНАЯ ФАНТА
Рет қаралды 3,8 МЛН
Can You Draw A PERFECTLY Dotted Circle?
00:55
Stokes Twins
Рет қаралды 40 МЛН
Became invisible for one day!  #funny #wednesday #memes
00:25
Watch Me
Рет қаралды 58 МЛН
How to Use Toggle Bolts
9:16
Dennis Coffey
Рет қаралды 296 М.
How to Fit Hollow Wall Anchors
6:48
Charlie DIYte
Рет қаралды 1 МЛН
What Plasterboard Fixings Are the Best | Drywall Fixings Tested
12:39
How To Fix and Properly Install Screw In Drywall Anchors
2:58
The Funny Carpenter
Рет қаралды 956 М.
10 Best Drywall Anchor | Best Wall Anchors
9:12
Tools Zone
Рет қаралды 10 М.
DryWall Anchor Operation
9:52
noessllc LLC
Рет қаралды 125 М.
Wonderful street food making skill
0:25
Fruit University
Рет қаралды 112 МЛН
Does size matter? BEACH EDITION
0:32
Mini Katana
Рет қаралды 18 МЛН
БЕСТРАШНЫЙ ШКОЛЬНИК НА ВЕЛОСИПЕДЕ #shorts
0:11