Classic Mini manual transmission gets assembled with some new parts

[@easyricer]

The Mustang is back up running and running very well! Now I'm sitting on my butt watching you!

[@JohnnyAFG81]

That Vapor blasting makes it look brand new.

[@XXXXXXXXXXXXXXXPP]

My dad was a lumber jack, Montana, big trees. Died at 89 last year. He was a big fan of Mini and watching Dave !!! He used to say to me ," Put on that man who builds the engines, than you can leave...lol" Like I wasn't needed but he was being cheeky. Every time I watch an episode I remember my dad.👍👍👍😭

[@jasonpeters9390]

Don't know what plans you have for this engine but myself I would of but a central oil pickup pipe in it as you can tell and release the fondness and memorys that engine brings back great job

[@Classicmodeler]

One of the best darn designs BMC ever came up with. (Just the roller bearing placement alone is winner enough. An E Jag has about 276 of the bleeding things that you have to hold in with grease alone to assemble correctly) Very nice and clean build!

[@Cartier_specialist]

I betcha I'm not the only one that would like to see a behind the scenes with yet another camera recording the video crew that records these videos.

[@lotuselanplus2s]

Now rebuilding a trashed Suzuki GS500f Motorcycle, its now about 80% done, put the wiring harness in it this evening but not finished with that yet, ran out of daylight, going back at it tomorrow evening when i get home from work, youre doing a great job with the engine and gearbox.

[@nuttfarmgarage6434]

Brilliant bit of engineering, considering it came out in 1959. Would love to have one, would make a cool companion for my 1961 Beetle.

[@redbarchetta8782]

Inspired the Lamborghini too. That's how they knew they could put a V12 sideways in a car. :)

[@mrennick]

They are awesome and worth getting one if you are able. We have a 1990 998 cc car it is amazing fun.

[@skylinefever]

@@mrennick Sounds interesting. I think the last street legal Mini was sold in the USA around 1969. However, it is legal to import cars that are 25 years old or more. Most of the focus has been getting the best turbocharged cars that Japan ever built. Having a real Mini from the 1990s might include several improvements, such as having EFI, and already being compatible with unleaded gasoline. I'm sure there are other upsides that happened over the years, but no British car was ever my passion, I don't know what else might have happened.

[@paulcooper7178]

They are awesome

[@theblackbear211]

Great concept - poor execution - don't get me wrong, I've loved (and owned) British cars since I was in my teens (the 1970's) I've had more than 1 with this powerplant... they are not, and never were, what would be considered "reliable" cars in the US.

[@miketeeveedub5779]

Worlds most complicated oil pan? Ferrari? BMW? McLaren? Nope... It's a 60's Mini - it has a transaxle in it! Amazing!

[@Jesse-B]

The Brits took a slightly different path with cars, but some of their engineering is amazing - compact country, compact cars - in Australia we got both Brit and American technology at the same time, talk about "spoiled for choice". I knew bloke who had a Cooper S parked alongside a V8 Mustang, he couldn't say he preferred one over the other, loved them equally.

[@skylinefever]

That is true, but some American car drivers joked about British car reliability. My favorite joke was how Lucas electrical components had a special smoke inside of them, and if the smoke ever leaked out, that was the cause of your problem. Electrical components were less glitch prone. There were also jokes about oil leaks happening more often. It was said that once the Datsun 240Z arrived in the USA, it spelled the end of the British car sales in the USA. It may have been called the S30 Fairlady over in Australia. It was far from perfect, but had many advantages over what was sold at the time.

[@thomaswykes3647]

I passed my driving test aged 17 in an Austin Mini in 1994. I really wanted one afterwards but as a student, I couldn't afford one. Fast forward nearly 30 years and I still can't afford one as prices have gone insane!

[@JohnHill-qo3hb]

A high school chum of mine bought a new Mini, cash, back then they were $6795 CDN (in the 70's).

[@Coveangel]

This reminds me of all the Saab 99 & 900 rebuilds I had done many eons ago…. I have always admired the well engineered tight, compact engine/transmission packages they produced

[@skylinefever]

I described the original SAAB 900 as having "Everything 90 or 180 degrees of where you expect it under the hood."

[@Coveangel]

@@skylinefever ya, including the hood too!

[@jeffplant3]

You made something complicated and intricate look simple. Great to see this part of the project come together. A unique project. Well done. Looking forward to seeing it come together.

[@MoparMattt]

Seems like hagertys getting it everyone likes watching davin just a genuine dude!

[@iainbarker1815]

Before you reassemble the engine onto the gearbox, set the clearance on the idler gear - there are different width shims available - else the helical gears will cause it to grind. Also set the differential pre-load - bolting up with the original width shims is almost guaranteed to leave them too loose. Center oil pickup is a worthwhile upgrade also.

[@iainbarker1815]

@@GilesManyweathers QL5000 are a good alternative

[@matmatcorner4235]

Just 10min video. Not 2hours video on video just content. What you thing this video for D.I.Y. This not school

[@swedish_brick_enjoyer]

@@matmatcorner4235 I had a stroke reading that.

[@xavierbabin4451]

Super work ! Very interesting ! Hello from France 🇨🇵!

[@av8tore71]

I'm an Airframe & Powerplant mechanic (A&PIA) this video kinda reminds me what I'm doing today. I just got done rebuilding the engine off of a P-51 Mustang The Rolls Royce Merlin and the transmission on this Mini I feel like the rear assessor's box on the Merlin where there are nothing but gears and shafts keeping in mind the timing of the engine and the gear box and the reduction gear box for the CONTRA ROTATING Props. Having a good plan is a good start assembly and disassembly and reassembly 😂😂 Darn English 😂😂

[@Surestick88]

Contra rotating props on a Merlin? That's more an RR Gryphon thing, no? I'm guessing the accessory gearing on the back of either engine, especially if it's one with a two speed supercharger is quite complicated.

[@ol_smokey9370]

You can keep that, I'll stick to PT6s.

[@Surestick88]

@@ol_smokey9370 imagine a 1:1 scale fully composite DH Mosquito with a couple of P&W PT6 under the Merlin cowls? That would be a fun, fast airplane.

[@ol_smokey9370]

@@Surestick88 i always thought a scaled down P40 would be perfect for a PT6 with the king air nacelle

[@TheFarCobra]

Top gear top tip … set up the drop gear idler side clearance before you put the engine on.

[@maldo72]

you should have put a limited-slip diff in there while you were there

[@davidthompson245]

Well done Hagerty,greatest rebuilds on KZbin.

[@bullast2046]

My first 4-speed rebuild was exactly that.. put it in, take it out repeatedly.. I’d find random pieces and think “damnit.. gotta blow it back apart”.. once it was done, I was an expert though.. then I shredded 1 & 2 again and got a Muncie

[@Mr_Min]

Its been 20+ years since I rebuild one of these transmissions I wish I had vapour honing back then, it looks fantastic. Keep up the great content.

[@RestorationObsession]

Top quality work by Davin, as always.

[@neilpearcey402]

The Mini engine is very similar to motorcycle engines in that the oil is used to lubricate the engine and gear box. With this in mind metal particles from the gear box can end up in the oil. There is a product, Magnom magnetic filter can be used to catch these particles. It sits between the filter and the filter housing. if it is fitted with the old type of filter it can be upgraded to the spin on type. There is plenty of parts available on UK MINI web sites for the conversion and the MAGNOM filter. I have a Magnom fitted to my motorcycle and it has picked up metal swarf.

[@skylinefever]

That is important to know. Some cars would be built with a magnet on the drain plug, I don't know if the Mini did. Many companies have magnetic oil drain plugs, so if I ever need a new drain plug, I order one. There is also the "Filtermag" that is a curved magnet and holds itself to spin on filters.

[@tedhewitt4299]

Very clean job Davin.

[@Airpaycheck]

Could've used this video in '77 when the shift linkage broke on my Mini in England!

[@travezripley]

Thank you for this series boys!

[@marksieber4626]

I’ve really enjoyed this series. Good work hagerty.

[@sonkor7334]

I love watching davin doing this, very Clean very precise job thank you for making me happy ❤

[@mariosnikolaou5212]

So hiped about this old classic car.More of this please!! European cars ftw. Happy new year.

[@JMKGarage]

Coming together very nicely Davin and team 👍

[@CorvetteBill364]

Top notch as always Davin ! Look forward to a startup!

[@kyleforeman4543]

Wow, great as allways Davin an camera crew,,that's alot of bits an pieces.tks for sharing again.untill next time.😯😯😎😎😎😎

[@joes3461]

No idea the OG mini engine and trans were one in the same till this series was started. One day I’ll have one, one day. They are crazy tiny tho for American car sizes 😂

[@taffylugg]

Did my apprenticeship with Austin Rover . Crikey I remember stripping down 1 of these a week . Then it was the Metro which was similar gearbox .

[@Twin_Flyer]

That first start cant be too far away now!

[@barryphillips7327]

American mechanics would not be used to working on such a small engine/gearbox, in the UK to buy such a vehicle in good condition $40 000GBP++, the Mini Cooper S had racing successes including 65' Bathurst, Monte Carlo rally and other rally events, a small package, yes, but light weight with good power!! When the Cooper S ( and the Mk2 Jag ) came out in the 60,s UK Police could NOT catch them the normal Police cars and had to buy Mini Cooper S and Mk2 Jags to catch the crooks! The Jag was a favorite get away car, grace, pace and space, perfect!!

[@skylinefever]

That's interesting. I heard that in the 1990s, the Vauxhall Carrolton then became the best getaway car in the UK.

[@Mr_Min]

I'll add, I didn't see you checking backlash or adding any shims to the diff housing.. I'd also be tempted to upgrade the uni joints to the later model steel type. I was never a fan of the rubber joint in a potentially oily environment.

[@EdontheBeach]

Really enjoying this series with the Mini. Just FYI though, the plural of shaft is shafts not shaves

[@shane142]

Think BMC Mini manual are fun to work on. You would hate working on the "Mini-Matic" automatic transmission (around 1965 if I remember correctly as an option then later around the 1975 with the Clubman's). The owner would have to run the engine for about 5 mins beforehand. To let the oil warm up and flow around the auto for a time. Otherwise, the auto would often be away getting fixed. Was not one of the best BMC's ideas for the Mini's back then. Note to the ones that don't know BMC stands for British Motor Corporation Limited, why many car companies like Morris and Austin made Mini's under there badge's and then later under the Layland badge.

[@sonyhk3824]

Big thumbs-up to you Davin 👍 n to the guys

[@JohnHill-qo3hb]

Rubber bushed U-joints, do you have the Limited Slip Differential?? If you do, that will be a wild car in the corners!

[@ericsanford5639]

good job, always enjoy your videos.

[@monkeybarmonkeyman]

Bit heavy on the music soundtrack this one... especially near the end of the Rock Auto spot. Video content was tight; was surprised nothing about the semi-destroyed roller bearing.. maybe I missed it.

[@2loudspeakers]

Beautiful work, and a beautifully filmed

[@alislom94]

I love it i am a big fan with this kind of work…….

[@My_Op]

I'm just a voyeur, thanks for the great exhibition :-)

[@ydnallah1541]

I miss my Mini Cooper, it was a great little car and handled like a go kart, you can throw them into corners at insane speeds, a tiny bit of lift off oversteer, stamp on the throttle and that’s it…brakes are much pretty unneeded

[@THROTTLEPOWER]

Great vid, very cool!!!!!!!!👍👍👍

[@Trapper50cal]

Not gonna lie, that is a daunting task...one thing wrong and it's square one, and heaven forbid you don't find something wrong until right after install...

[@richardthacker2919]

It’s important to change the synchronizer baulk rings and the differential cross-pin for the planetary gears…both weak items in a mini especially an ‘S’. It also should have the uprated hardy-spicer inner U-joints. The rubber ones are for a lower powered non ‘S’ mini.

[@diecastcollector508]

Marvelous Bro, simply fabulous work 😍

[@swervysignals3620]

These videos are great

[@SupermasiveHole]

Un crack.. saludos desde España

[@boboalan8207]

I love your channel Dave. What I would do to have the knowledge you have. 🍻

[@smorg12]

From experience, if you want it to be reliable, throw in a cross pin diff.

[@TheFarCobra]

And a center oil pickup.

[@ronlynch7744]

Cleaned up sweet. 😎👍🇨🇦

[@makj7059]

🚙absolutely beautiful!

[@highglide3454]

Как всегда - отличная работа, бро!

[@paulsilva3346]

2:24 the bronze bushing shown has no OIL ENTRY HOLE.??? How will OIL enter that bushing without an entry/intake.???

[@pauldonnelly7949]

Every man and his dog in the UK/Commonwealth has owned a Mini at some point, really were as common as muck. Applaud your efforts in deciphering the great British maxim of why use one part when twenty will do and get them all into a casing the size of a beer can, but hey, at least its all Imperial measurements, incidentally why doesn't America go metric? Your military has...

[@Hoaxer51]

Because of all us stubborn baby boomers 😐. They tried to do a switch quite awhile ago and it didn’t work out so well, I think what they need to do is try a generational change over. Use both measurements for ten years or so and then wean us over. There’s also some costs that go with a change over, like owning two or three different rulers and tape measures, But the mistakes that were being made were the most costly. I was doing road construction during that time period and doing conversions on radius points and offsets for roadways was a big problem and very costly in terms of time wasted doing conversions while the rest of the crew waited for an answer. Companies wouldn’t bid on state jobs that required metric measurements because of the cost factor of errors (tearing roadways out and putting them where they should be) and time delays (waiting for a foreman to do a conversion for a measurement while an eight man crew stood around). They were trying to do it to fast for the people to catch on. The whole part of metrics being easier doesn’t really stand up because we had rulers and measuring tapes that were broken down to tenths of an inch and foot. If this answer wasn’t so long I’d get into centigrade and Fahrenheit! 😜

[@skylinefever]

Actually, most American cars were beginning to go metric in the 70s, and by the 80s, seeing something that wasn't metric was rare.

[@bfed-1220]

One of your best builds. Please explain how you manage to clean the case and gears better tn new. What did you spray on t parts?

[@NeilIrving1973]

If only I had £5 for every one of them I rebuild while working for a Austin Rover dealership, lol I could retire by now 😁

[@ditzydoo4378]

The Oily Trans-Pan... ^~^

[@StreetRacingR34]

Could you guys make a how to video on a 2005 STI transmission? 😅 asking for a friend.

[@13slot28]

Take a shot everytime he says "vaper Hone".

[@DougsMessyGarage]

Unfortunately, before I can get out in my shop, I have demessify it a bit😂

[@MrReinmetal]

Хороший тамада и конкурсы интересные 👍

[@Microfishingstory]

As a Hagerty member are we able to get an uncut and full length version of the mini series? Would be a great resource to have for my 62 mk1

[@z0rkmids]

What for? If this video is any indication, it’ll just be someone saying “vapor honed” another 400 times instead of *literally anything else descriptive* about the thing they’re working on.

[@Microfishingstory]

@@z0rkmids that’s my point, I’d really like a slowed down version with the guy actually talking about that he’s doing, unless such a video does not exist

[@davescrimshaw7781]

Wondering which was used - glass media, sodium bicarbonate, aluminum oxide, ceramic bead etc

[@realmongo7565]

Since this transmission is loaded with yellow metals, what's the plan for transmission gear lube?

[@thealmightywalrus5404]

Did you hagerty guys consider a limited slip for that little diff? Not that this thing makes enough power to really want to torque steer or anything but just a curiosity if someone makes anything for it

[@skylinefever]

I'm sure some people do make them, it is popular to race the original Mini. Plus, limited slip is a huge help if you are accelerating out of a turn with FWD.

[@nahimibrahim107]

Where can we see the disassembly??? Would really be helpful.

[@ragnarironspear1791]

SMASH THAT LIKE BUTTON FOLKS 👍🏻

[@Rickyboy707]

Any parts left over?

[@tonylewis8209]

Too bad it’s not the original gear box, cooper s boxes had the hardy spicer outputs not the rubber couplers as this one has

[@rickc.5325]

Hey David... great video ! Do you know where I can find a video of a automatic transmission rebuild ? Or do you have one ? Can't seem to locate anything that can help me. Thanks for any help. Cheers- Rick

[@goldeneaglearbor614]

Question for anyone that sees it and could help. I want to save my dad's old 56 international s-130 but I can't find anywhere that will rebuild a starter for it. The original is burned up (pretty sure it got stuck engaged when the motor started and that's why he parked it years ago) everything else I can handle like the motor, carb, transmission etc. I just can't find a damn starter. Any tips on how to sort that?

[@adofives5252]

Just to give you a heads up did you check the clearance with the feeler gauge on the laygear ? If you have what are your clearance gap. Thanks

[@djverhulst]

I did dit rebuild a few time

[@Мистер_ЗМЗ]

Looks like gearbox bigger then engine!

[@AzazelCain]

That exploded parts view have me anxiety.

[@totoalfonso5615]

great video, what's the song from the begining?

[@jimclarke1108]

I rebuilt a mini engine in the 70's, in the back room of my parents house, after assembly it wouldn't fit out the door

[@garydefoor6787]

What happened to the snowball race car build, haven't seen any new updates?

[@pboyd4278]

What happened to the 1937 Coupe rebuild?

[@ianatkinson8464]

😎👍

[@gvxclassics]

So, ugh... What is your budget for this engine/tranny project.. How many hours of labor. THAT would be interesting. I would imagine this is a $10,000 rebuild.

[@johnrebus1641]

Gearbox !

[@teddymullins3706]

An unusual pc of machinery to say the least But I am also working on something Unusual an81 VW rabbit pick up engine1.6 diesel

[@skylinefever]

Sometimes a piece of machinery only seems unusual because of where it is. I have to wonder how many people in western Europe would find anything weird about a MKII VW chassis with a diesel.

[@marceltartan4747]

Hagerty.... Doctor House.... of cars!

[@johnds6621]

Davin did you just wake up?

[@ezequielpiacenza3776]

✌️👍👍👍👍👍👌

[@curtisvonepp4335]

Veary well done BUT THE HYPER MUSIC CANT YOU MAKE IT MELLOW . 🙄

[@JM_BoltActionGunStuff]

More volume to the music.... NOT!

[@neilperry2224]

Why don't you say trans /pan.

[@floydblandston108]

Uggh...a 3 main block sharing oil and a case with the transmission. Sounds like a prime candidate for a swap instead of a resto....

[@skylinefever]

I do find the 3 bearing design odd, but I think other higher performing versions of the 1275 still had 3 main bearings. As for a shared transmission, tons of 4-stroke motorcycles did that, even some really good ones.

[@floydblandston108]

@@skylinefever - automobiles are designed for loads and longevity motorcycles don't need to compete with. Both flaws I mentioned were just 'bodge'- a necessary response to non-design limiting factors, inherently sub-optimum, of the style that makes UK products both ingenious and infuriating. The Mini's external/internal package is worth saving; with a modern drivetrain it would be hugely improved even, and in a way superior to retro pastiche like the modern pantomime "Mini".

[@scotte2815]

#7

[@ACommenterOnYouTube]

1st 👍🏾

[@montycrain5783]

Trying to invent a new word “shalves”? It’s either halves or shafts.