Progress on the 51 GMC panel truck, little floor work and firewall patching.

[@chuckstith838]

It's great that you close out almost all of your videos by petting your best friend. We like it and he does too. Keep building. Enjoy

[@BlueStar712]

We have a 54 loadmaster, 2.5 ton front body clip, all modern drive train 4x4 , nearly the same body. We overland with it camp , Offroad , we love it. I’m so happy to see these beutiful trucks being put back on the road. Thank you very much , I love old cars!

[@michaelweeks6022]

Just found you on the tube ! Another builder from way up north from Tennessee doing what he loves to do ,with a 4 legged friend ! It's enjoying watching someone share what they do !

[@glennnickerson8438]

Never a dull moment in Manitoba! Looking good Brent! That laugh of yours tells me everything is going to work out just fine!

[@chicagovasko]

Its contagious. Lol

[@RobertFay]

*- With the speeded up video, your metal work always has the feel of sculpting. I love it.* *- All your experience with the beer patterning material make it all so easy looking. I love that too ! ! !*

[@TomCrosman]

I used to own a 51 chevy 1 ton panel truck that looked about like this gmc back in the 1970’s. Great truck.

[@allan9603]

Miller Lite template courtesy of Joe's Bar and Grill. Brent's cans of Miller Lite, priceless! 🤸‍♂️🤣👍🍻🇺🇸🇸🇪

[@kimkiriniki9433]

Your sheet metal cutting device looks worryingly like Pablo..ha ha. Great work, terrific to watch, you are a genius.

[@FD-is1ug]

Aren't they all "budget builds"?... That's what makes them so entertaining!

[@jimmyers1630]

I've never quite heard MIDNIGHT SPECIAL played so well as on this ORGAN!! Unusual to say the LEAST!!

[@MortskeRepair]

Sorry Puddin and I impeded your progress!! Keep up the good work boss!!

[@tjeffjenkins6226]

NICE job. Your description of coaxing the exhaust into place had me in stitches! But alas, I will have to rewind to remember the specific term you used...thank you.

[@garyburchett9060]

Stance looks good. I think Pablo's ready to go for a ride.

[@Nitewatch-xc9yz]

Suggestion on fuel door~~~~graft in the fuel door from the donor truck, would look good and give it a clean line,, just my opinion, my friend, love your builds (I enjoy your music selection)

[@BobPegram]

I dunno what it is or why, but I generally dig the tunes you play to go with the action. No classical, but very diverse music!

[@MrBiggs269]

I could wager/bet you have never been in a fight. You are the type people may get mad at it, then want to break down in front of you and ask for help to why they are mad. Your energy man just sayn, so soothing

[@desertlobster908]

Brent your template making is par exellance, very enjoyable to watch.

[@VintageJunker]

3M RUST CONVERTER. Turns it black and your good to go! Nice job on the panel!

[@briankinnear7461]

Looking good Brent. Great work as usual. Love the sound of the dog drinking in the background during your outro. Be safe and stay well.

[@johnmcgreevy742]

Ahh yes, Friday night at Brent's garage, watching Halfass Kustoms do their thing! Doesn't get anymore relaxing than that! Thanks so much for the video. Excellent choice of tunes also! You know, looking at Pablo sitting in the back round of the shop staring at you, he has the look of "who the hell is he talking to?" LOL

[@jimmyers1630]

MIDNIGHT SPECIAL ON THE ORGAN AWESOME!!

[@johnswick4593]

Watching you do all this work to this old panel is fascinating. It's gunna be an awesome resto-mod

[@brianhdueck3372]

Brent, watching you figure things out is an inspiration to me. Combined with good commentating and good music, hey! It’s a great evening! Thank you sir.

[@dentech4710]

Love your videos….glad your working on the panel truck.

[@CompToyZ]

The work is outstanding but I'm not sure about the music sometimes lol. Im learning so much Sir, thank you so much!

[@MIKEH.777]

That delivery van is looking good so far can't wait to see the rest of it go together. Your doing a great job on it. And a great job on your videos so keep up the great work and God Bless you and your family 💯👍👍🙏🙏✌

[@S.JerseyJim]

I was a ceramic tile guy for 40 yrs and never wore gloves either. Cuts are part of the deal. 👍

[@IronHorseGarage]

Newly subscribbed!!! There was a couple 40's wagons at the car show we just attended in our latest video!!!

[@BobPegram]

Mustie1 in NH USA will be glad to hear that many Manitobans use bar and chain oil for rustproofing! That's what he does, he came to it on his own. He does dilute it a bit to spray it on.

[@shannonlawsonnashville]

Cool that you mention Mortski & puddin. I like both of their channels and found you because they talked about your channel in an episode. But right now, out of the three, you are my favorite

[@Carl09of09]

I was waiting for this next video, My 3 year old watches it with me he keeps saying " he's fixing that truck poppy" Its coming along just fine,

[@stomper2582]

Looks like the rust inhibitor paint changed colors as advertised. Looks like you’re going to be able to make the radiator work. Truck is looking good. 👊👍

[@freddiebates5539]

I wish I had the energy you have, this dialysis nightly is taking away all my zap and it's hard to get going every day and. Stay at it buddy .

[@armandogarciajr1478]

The 51 panel is looking very good I love this project. As always you impressed the heck out me with your mad skills. Thanks.

[@j.c.smithprojects]

the more i see this truck, the more i like it! going to be a great daily i am sure!

[@garywheeler27]

It's sure gonna look good sat in the stable next to the General!

[@thereno1172]

I want an old panel Van like that only I want it lifted on 37s or 40s. Hopefully next job pays enough to afford one lol keep up the great work! Love the vids!

[@karriefalon7779]

people like me sit waching and seeing what these guys do stuff i done many many years ago, thinking how diffrent my life would be today if i coulda had a camera documenting all i done and making money for the video material from it. like stuffin a old 390 4 speed into a 49 ford pick up, a 2000hp hemi into my chevelle, putting big blocks into 3 notch back mustangs, hardest putting a ford 400 into a chevy van, building front end loaders on 2 diffrent garden tractors, putting deseil motors in both them garden tractors, and fellows they were not bigger tractors i am talking little baby 12 horse and a 18 horse the 18 horse i even made duals for it and replica looking air cleaner and muffler to mach a full size farm tractor, happy to still have my pride and joy, the baby Fifth wheel i built to pull behind my ford ranger with replica semi trailer suspention i still use it allot best thing i ever built. it has even been to winnipeg

[@DavidWischnewski]

I like it. I love the looks of the old stuff. 👍👍✌

[@wkiurijj1]

Первый раз увидел, что ты, что-то на раму побрызгал ! Прогресс. ! Дерзай !

[@AndrewHCann]

Excellent video Halfass Kustoms (Brent) :) also take time for sure and think got winner to included ! Think orgnail rad look nice for also may need adjustment to hood latch bit otherwise should work and drive axle I would say get to right so pivt on bumps also rough roads okay too also come one step at time! Also when do fuel tank do a O ring on body out metal so take off easy filler neck if need replacement in future and bolt up easier too also get right amount of to of Air pressure fuel cap too ! Hope can use metal fuel cap to and last longer then plastic one's do also rubber seal on them too!

[@CTmoog]

Hey man! New to the channel. I like what you guys are doing. The music sounds good too!

[@chicagovasko]

Welcome to one of the best car channels on KZbin.

[@CTmoog]

@@chicagovasko 👍

[@jeremyhanna3852]

He is great go binge watch all the older stuff if your new here you might also try dd speed shop, vise grip garge, mr hevy chevy, junk yard digs, thunder head 289 just to name a few

[@canadianentertainment]

Ct your doing the dragon rebuild right

[@study650]

Good to see you, CT. How is the Dragon coming?

[@johncooper9221]

Nice work! BTW spraying the rust converter on the chassis seemed to darken up over time. For a quick fix it Looks good. keep up the strong work.

[@franksgarage8551]

That rust convertor goes a long way. I buy 6 at a time, try to hit inside of any patch panels i do. One thing, respirator. That stuff gets to me.

[@chrispiazza7487]

I think your best friend there deserves a pay raise

[@ranchdog7920]

Good production. We appreciate your efforts

[@stevedeacon1213]

Looking really good, ever better than I had imagined good work, keep it up!

[@DennisMurphey]

I am getting soft on the panel truck for a Model train parts truck but it is so freaking big. Thanks for sharing your work really enjoy watching you getter done! Dennis in Virginia

[@DennisMurphey]

I saw a 53 Chevy Panel near by, 6 cyl 3 on a tree single back door complete for $2,000. It that too much to pay, does not run but is complete. Floor is gone Rusted holes body not so bad. Just asking.

[@aussiejas6599]

Shed looks like mine, Everything in it's PLACE.

[@steinbauge4591]

Lanoline grease will stabilize that rust for good, in one operation. No sandblasting needed, it goes into the metal - surface rust actually helps. Need some sort of paint gun/underbody treatment tools ofc.

[@kennethpensyl7791]

Super Awesome Truck. Getting allot closer to cutting donuts in onion patch.

[@koonings1]

I like this GMC panel truck van Brent.

[@johnds6621]

FYI when using your saw table never wear gloves. I got yelled at once at work when I was using that type of saw to cut the ends off of heating elements. Manager told me the teeth of the saw will catch your gloves and draw your fingers into the blade.

[@nowhereman7398]

Yes it will.

[@billbly1691]

Great job always enjoy your channel thank you

[@customowing]

Lot of work to be done but your doing Fine, like say keep on trucking masn one long truck. but made for that frame. nice work as always.

[@THRASHMETALFUNRIFFS]

Fun episode! I think I was on that Mortske and Puddin' stream that day dude! This bluesy metal wah jam is making me think about learning it or using it for a backing track to shred all over and embarrass myself This following track you use a lot with the Kalliope sounding organ always makes me laugh to the fast motion for some reason but it seriously sounds like something The Beastie Boys would make or their piano guy Money Mark on his solo stuff, etc!!

[@davidconley3610]

Your fab skills are killer Brent!

[@RatRodBobBuilds]

That rust kill will certainly help a lot. I had good luck pressure washing the frame then put the rust kill stuff on. I use OSHPO for rust treatment.

[@glynndavies5283]

lookin good Brent. keep well

[@darrenbrisson4336]

Cool you have a water jet table and a welder you can build anything how about a new space shuttle for NASA lol! Love the time lapse photography hate waiting weeks for a ten minute segment

[@richardgray8477]

I've always wanted a panal old truck anyways this is going to be a great project

[@Ron36415]

I put a 235 in one of these that had a 215 originally, took the cover off in front of the rad support, welded 1/4 by 1 flat stock to both verticals drilled and tapped it for 5/16 and mounted the rad to the front of the stock u , did have to notch the bottom and weld in a piece of pipe so the lower rad hose could go through, trim the top piece and reinstall. it's been 2 or so years and the guy drives it almost daily, so I guess it's pretty good.

[@stevenayala2324]

I know the thing going ride smooth as ice when your done !

[@blueeyz2046]

Ah yes. A video Top Dawg Carona and I can enjoy! I like how you priortize exhaust over brake lines!

[@markmclellon8516]

Crossed members out front for the rad sitt'n high, might have to clearance that guy. Converted da frame, foo foo canned, from rust to rust 1st try, darker that night. Pablo out da door outa sight. Tunnel n firewall patches outa Lite. Might have ta drink up some more patches tonight. Da short driveshaft clearanced, heat n hammered da pipe. One way or another it'll be sized just right.

[@MrBiggs269]

Cant wait for the photoshoot of this parked next to the general. Just because

[@marko-seta97]

Very nice! My favourite channel to watch.

[@raymondcoggins297]

Gonna look awesome love it you are a master

[@garymccord4277]

Always great videos It is if I am watching an artist doing their job and for awhile it looks hopeless, then wham you have a masterpiece. That metal shear reminds me of Pac Man the way it eats that metal.

[@ronlynch7744]

Man that’s enough mods for 10 guys, but your doing it all. 😎👍🇨🇦

[@donnie2533]

Great video again my friend keep them coming .

[@cowboychevyschneider]

keep the great work man hope you have a wonderful weekend

[@berniebass3575]

I'd love to be this guys helper.

[@christophersmith6722]

the background music matches your high energy. good choice

[@brianherron5400]

Looks great 👍

[@joe1annie2]

Learning Some much Kool Stuff Thanks for sharing Brent :-)

[@IronHorseGarage]

Looking good!!

[@chicagovasko]

Hey good day to iron horse garage.

[@IronHorseGarage]

@@chicagovasko Good day to you!!

[@adriandean7815]

Sits great. Make a good camper. For the mountains or desert. You should make one side a slide out. That would be cool. Plus a slide out cook draw. You can get a bat wing sun shade. Or two. Get some good shade. But def a cool camper with modern running gear. Always a good seller. Heading to Costa Rica. Good luck man. Have a good day. Find your self a full length roof rack that comes over the hood. They good shade when driving. Keep you cool. Bolt on all the shit you got laying around your yard. Lol. I'm not joking.

[@TommysTanks]

looking much better.

[@sylvainleseur1072]

Thanks to share with us.

[@shaneandrow2971]

Nice work it dont take you long to get them done

[@timhanson2080]

Coming along nicely.

[@shanewright6958]

Another great video 👍👍🇨🇱

[@OwenFromOhio]

The frame is looking pretty good from here, not sure if that stuff worked or if you added some paint?? Who makes your preferred cardboard... Coors or Lite??

[@myrondesjarlait9752]

Can we get a short video of nuthin but loving on the puppy?

[@roberiomatos6406]

Gosto demais o seu desenvolvimento de trabalho. Fico sempre na expectativa do seu proximo video.

[@robertjean659]

Nice work again

[@anytractorman]

Gettin closer!

[@motorfreaknew]

Awesome! 😎💪

[@stephenvictorbailey4055]

Hi from the uk.... I have been wondering....with frame swaps like these what do you register the vehicle as.....what the body is....or what vehicle the frame came from?. Great work man....really diggin the channel.

[@HalfassKustoms]

we do the body out here

[@arthursmith5409]

Maybe a two part process, spraying the rust converter on to nuetralize the rust, then paint over with your choice of paint.

[@ابومصطفى-ك5ن1ق]

Iwite you from 5days great and wonderful work

[@kevinhumphrey932]

On my front radiator support mount I used a a transmission mount out of a 98 s10 with a 2.2 5spd it worked really well

[@alsnow3582]

Ah, now I know why you buy beer by the case. You need template material for body panels 😁🍺🍺🍺

[@jackmehoff2961]

Awesome Build !

[@genehasenbuhler2594]

Let the midnight special🎶shine it's everlovin light on me🎵

[@usmclee65]

The rust conversion seems to being its job, what's its cost and you buy it in quarts, if it stops the rust, its worth it!

[@patricksmith8205]

I’m looking at using an aerosol spray of black fluid film on my truck chassis

[@floydt2029]

Love the driveshaft clearance work, Brent are you doing a wood floor for the back?

[@HalfassKustoms]

yeah might, though I think with the prices today it may be more than the truck is worth haha

[@kyleforeman4543]

Lookin good,time for a cold one.lol