LEFT TO ROT! Will This Excavator Start and DIG again?

LEFT TO ROT! Will This Excavator Start and DIG again?
▶️Watch The John Deere 310 here: • We found a Serious Iss...
💁🏻‍♂️Hamiltonville Farm MERCHANDISE: bit.ly/3pKO1aa
👕TRUEWERK CLOTHING: bit.ly/2M7wvyn
You'll automatically save 15% by using this link!
🎁 AMAZON STOREFRONT*: www.amazon.com...
🇺🇸HOMESTEAD IMPLEMENTS: bit.ly/2MsYVCC
ALWAYS FREE SHIPPING IN CONUS And ONTARIO!
👨🏻‍🌾 👩🏼‍🌾 Our website!
www.hamiltonvi...
🚜 TITAN ATTACHMENTS*:
www.dpbolvw.ne...
ShawnnJosey’s Facebook page: @joseyrepair
-----------------------------------------------------------------------------------------------------------------------
INSTAGRAM: @Hamiltonvillefarm
FACEBOOK: Hamiltonville Farm
*Some links are affiliate links. If you click on the link and purchase a product, then we receive a small commission.

[@HamiltonvilleFarm]

▶️Watch The John Deere 310 here: kzbin.info/www/bejne/oIGWm6R5e55ghc0 💁🏻‍♂️Hamiltonville Farm MERCHANDISE: bit.ly/3pKO1aa

[@catfish4346]

Yes make videos fixing it

[@clarencelaubinger5047]

Pq

[@vjkoyvjkoy5704]

214re4

[@vjkoyvjkoy5704]

3

[@vjkoyvjkoy5704]

🎸

[@patamos7019]

Sure would like to see the pump change!

[@kieranhegarty3138]

Definitely would love to see the pump being changed would b better than letting it sit to rust away.

[@john6218att]

one shot of starting fluid will kill those bees on contact,

[@sohomesick1]

Brakleen will kill them right out of the air.

[@bretthibbs6083]

or raid yard gard will do the same it will drop them in midair

[@scooter01922]

I second the starting spray. It works great and evaporates so quick you can hose the little buggers down and have a dry cab in less than a minute AND not cover everything in poison to then cover yourself in. Besides, who doesn't have a couple cans with them when trying to resurrect something in the weeds?

[@edpoints1127]

Brake clean, carb cleaner, starting fluid.... All good wasp/hornet sprays. And... You most likely have them right there

[@kk6aw]

Not a crescent wrench, it is an adjustable metric wrench. ;)

[@WatchWesWork]

If only the hydraulic oil would spray toward the wasps!

[@HamiltonvilleFarm]

😂

[@christophercounsil1748]

Ikr

[@kevinklingner3098]

1q

[@lyndelbeckwith1706]

Brake cleaner be better.

[@lyndelbeckwith1706]

Brake cleaner be better Wes.

[@flasher1663]

When storing it is best to retract all the rams possible, this eliminates rust forming on the rods and returning oil to the tank leaves less room for condensation in the tank

[@MichaelSmith-dg3kr]

Hank, I would enjoy watching you making those Hyd. repairs. I'm sure "BIG'UN" will get-r-done.

[@MirceaD28]

This one needs to be saved and restored.

[@roblong6518]

Got to see the machine move and dig again. Hank you've always got wasp spray with you, if you've got a can of starting fluid, (ether) it's puts wasps into a permanent deep sleep. Good job, and waiting to watch it move now.👍

[@martinchampagne9245]

Another video would be great, as long as it fits into every ones schedule. Also maybe after it's done the owner can make a video for you loading a couple trucks up.

[@magnamad84]

Definitely would love to see the pump replacement and seeing it moving and working again

[@jimlondon1]

Those Samsung excavators were a very good machine. They had lovely smooth hydraulics, great for detailing and finishing work and they were very strong. It'd be definitely worth repairing. They have become quite a sought-after machine for restoration here in the UK.

[@timmydrake9125]

15 years

[@excursionlimousineservice2203]

Great video! Yes let’s see the pump swap!!

[@hamiltonsullivan6563]

Thats a pretty nice excavator hank!! Glad to see she will have a higher chance of being saved

[@HamiltonvilleFarm]

👍👍

[@johnkeets6179]

You should do a video on all of the repairs which will be great 👍to see 👀 .

[@russelltrupia4479]

My first thought when I saw the size of this machine was Hank is going to need a BIG Adjustable wrench.

[@HamiltonvilleFarm]

lol for sure

[@swampratt36]

If that pump has enough ass to bust a hose , I'd be checking solenoids and valves before replacing a pump . Start with some diagnostics , opening pressure etc . Obviously the pump is still good .

[@hoseclampehhh]

Great job, I’m up for watching repairs. Great way to pass the time when I’m not working on my old iron lol.

[@cj7fun579]

Yeah, Lets see ya'll do a pump swap. You guys are making good progress. Can't believe that a steel line let go like that, must be a bad o-ring at the fitting that dried out.

[@john6218att]

they should have a battery kill switch in the engine compartment

[@newhampshire-bob1604]

I am surprised at the amount of abandoned equipment you have down there! I want one! 😛

[@HamiltonvilleFarm]

Lol it’s everywhere!

[@UncleMike1776]

I’m saying! If you’re just going to leave it to rot/rust away! I could make something out of it!

[@scooter01922]

Seriously, i could use something like that for my business but can't spare the INSANE amount one costs. Too bad they just get ditched in the south so darned far away.

[@livingstonexcavation732]

Hank let's see that pump swamp. 😁😁

[@dr.leonardhofstadtersavage6413]

Hank said: be amazing to get this thing started with just Cresent wrench. 🤣

[@HamiltonvilleFarm]

😁👍

[@johnking8679]

We used to call the Crescent wrench a " Shifting Spanner" in the old country (formerly Rhodesia).

[@zacconway-james6511]

Definitely would like to see all the work that goes into it to get it moving again!

[@TheIronDuke502]

I have a new appreciation for Crescent Wrenches after watching your videos. A video regarding the hydraulic pump replacement would be interesting. Did the metal line have a hole or was it split? I have brazed pinholes on the metal lines before, with about 50% success. It depends on what condition the metal tubing is in and the type of hole that I was trying to braze.

[@HamiltonvilleFarm]

I think we can braze it. 👍

[@TheIronDuke502]

@@HamiltonvilleFarm You have to get all of the paint ground off leaving bare metal. If there is any hydraulic fluid in the metal tubing - The heat will immediately draw the hydraulic fluid into the area being repaired. Good Luck.

[@grobertson2008]

Yes, a second video would be great.

[@TheMacs1]

Very cool! That’s definitely a leak lol

[@HamiltonvilleFarm]

Lol. Slightly

[@christophergrimes12]

I would like to see a part 2 on this

[@chuckcompton3622]

Great video! I would like to see the pump swap….

[@patrickhenry550]

Why is the pump automatically being blamed ? Sounds like it’s low on oil and sucking air for sure but those Kawasaki hydraulic pumps are very tough . Did y’all preform a flow test under pressure to determine the pump was at fault?

[@HamiltonvilleFarm]

you're a smart man....this video was filmed about a month ago. We think it might actually be a valve control versus the pump. We are going back out there on the 6th.

[@patrickhenry550]

If everything is weak it could be one of the main relief valves it might have one for each side of the pump . That pump is actually 3 pumps all built together. Two high flow pumps for all of the functions and the pilot pressure pump on the back of it for all of the controls. but if it is just one function that is weak check the circuit reliefs on that function. You need some gauges and tees and flow meters that will go up to about 60gpm to really do some serious testing.

[@patrickhenry550]

@@HamiltonvilleFarm If there is a way to send me a private message on here I could possibly give y’all some pointers but I’m not that well versed with KZbin.

[@richhowe7193]

The travel motors use the same pumps as boom, dipper & bucket so I’d say that the pumps aren’t the problem. Need to find if both travel motors don’t work and if it’s both directions. If you’ve got no travel at all you should see if there’s any pressure going to small valve block mounted to the travel levers. You would need around 40bar pressure to this block. If you’re getting limited travel power it could leaking pressure back to tank through the rotary coupling. First job, put some hydraulic oil in it!!

[@MrCountrybutler]

It sure would be cool, to see this digger up and running

[@randywright7433]

I'd love to see this machine come back to full life!

[@darrenroles737]

Sounds like the pump cavitating to me 👍

[@glennfryer1539]

Yes it’s scavenging for oil I was cringing with the noise, a blown seal or cracked pipe on the valve block personally just would shut the engine down, instead of dumping oil everywhere..I wonder how much hydraulic was in the tank before starting it up !!!!

[@ripstephenhawking8787]

Yall gotta revisit this ol girl once yall are ready to get her digging.

[@brian_2040]

I'm sure you have this figured out, but that red handle actually puts hydraulic pressure on the controls.

[@fundijo7862]

Wow MADE IN KOREA ~~~👍👍👍👍SAMSUNG EXCAVATOR

[@3DThrills]

Those 'Do Not Operate' signs are no joke. When I was a fisherman in the Florida Keys, a working boat anchored up while a deckhand dove in to clear the prop of rope. Another boat tied up alongside while they were taking a break. The 'diver' asked if the visiting captain would also like his prop checked for rope, while he was there. "Yeah, sounds great!" he replied. Then, after he was done gabbing, the visiting boat cast off and pulled away, totally forgetting about the diver whose arms were entangled in his prop. The man was rescued and sent to the hospital, with his mangled hands.

[@HamiltonvilleFarm]

Wow!!!

[@thecubemanclips3467]

Wasn't a finished job didn't dig any dirt. Poor rating till it works works.

[@CycloneDev]

I'd love to see a second video on that machine

[@AndrewHCann]

Also Happy Impendence Day on July 4th 2021 Hank :) & group plus everyone too and be safe too! Replaced Pump Video Hank :) be worth fixing up and showing it too! I used Christen Wrench , Monkey Wrench and many others even Vise Grips too!

[@HamiltonvilleFarm]

Thanks Andrew!

[@AndrewHCann]

@@HamiltonvilleFarm welcome Hank :) also Happy July 4 2021 for Impendence Day and everyone! Plus be safe too!

[@kevinsullivan1780]

Starting fluid ( very bad for wasps).just don't miss.

[@mhbpodnk]

Would be great to see him repairing it and actually working it digging some dirt after 10 years

[@HamiltonvilleFarm]

For sure

[@vk4frik1]

In Australia we call the Cresent Wrench a "FAFS" - Fits all F****** Sizes. Keep up all the good videos.

[@theranger311]

Yes please Hank go on to the next repair in this excavator, ,,,,, great video…. Wishing you and the Mrs. happy July 4 holiday so thankful for our American culture and our arm forces that are out there protecting us as well as our vets that sacrificed and continue to sacrifice daily,,,,,!

[@HamiltonvilleFarm]

Thanks buddy!

[@emt43043]

@@HamiltonvilleFarm please can we here moor about this digger and what’s happening with it

[@HamiltonvilleFarm]

The owner sold it before we were able to get back to it

[@bennyogden4524]

Sorry to tell you Hank there's no water in that radiator

[@richards091]

I just love those Crescent wrenches Hank!!

[@Trains-With-Shane]

Nice job Hank and Shawn! I vote for recording the pump and the other hydraulic fixes if it's not too much trouble. Oh Hank I gave ya a shout-out on the lawn mower rescue on my channel. Can't remember which video it was but I think it was part-3. It was either Part 2 or 3. Check it out. I could REALLY use the traffic to my channel. -Shane

[@averagedudethirteen3257]

Hopefully you guys do the video with the pump swap out. I absolutely enjoy every video you make and look forward to the next. Keep up the great work.

[@HamiltonvilleFarm]

Thanks!

[@stanleybaker8707]

I would love to see it up and running.

[@RandyB1973]

LOVE your 'will it start' content! Thank you!

[@HamiltonvilleFarm]

Thanks much!

[@nicholasj78]

Yes please have another video of this beast being finally repaired and back operating.

[@Justinsr1983]

Would like to see the pump change

[@RM.....]

Brake cleaner or either makes quick work of those wasps

[@drifter1949]

I see you connect battery negative to earth wire then you touch battery positive to earth with your wrench.

[@amos4457]

I just wonder if their is a drive coupling that could be broke that drives each pump?

[@HamiltonvilleFarm]

Idk. We are tinkering with it. Video out soon

[@FindUsCamping]

And it starts with just a crescent wrench? Love it!!

[@georgedavidson7986]

Playing around with the levers for the camera just. Hurts the pump with no oil in the systems

[@pederb82]

Agreed. And I got angry feels when they continued to try even after discovering the leak. That’s just idiocy and totally unnecessary. Hurts the equipment and spills oil everywhere.

[@andrewkiwi1]

Don't use the wasp and hornet spray Use CRC Brakleen "it kills them deader than dead." Good to see its going to be fixed and put to work again. Hydraulic pumps and rams are never cheap to fix.

[@ssmith2329]

Yeah please make a video and finishing starting up the excavator that you guys worked on it and got it the move harshly with the pump because some of your competition out there they not completing their jobs or giving you an ending to a story thank you

[@HamiltonvilleFarm]

Good feedback

[@bhepner1]

This videos are fun! Yes we want to see the pump replaced using only a crescent wrench. :)

[@HamiltonvilleFarm]

lol that would be something wouldn’t it!

[@jameslcoble248]

I'd honestly like to see the pump replaced. I would suggest that the owner not only replace the pump, but it probably wouldn't hurt to replace all the lines. I know that it would be costly, but I believe it would be well worth it in the end. Especially for how long it's been sitting.

[@HamiltonvilleFarm]

Thanks James!

[@morgansword]

Seldom see a break down fix itself by setting. I think swapping the pump is just nuts and bolts. Fixing the pump is some serious stuff. What I would like to see is that machine get a makeover and clean up that broken glass and replace the seat, get them dang bee's out of there completely. I hope that the oil bath got a few of them. This hot weather has been just what those ornery bees like the best. I got down inside one of those excavators and got trapped by bees. I was stung so many times that it only made me really sick. It could of killed me but well I am here so I guess it didn't or I forgot to fall down. I just watch whatever you put on the airwaves

[@carlhelmick7711]

Got some starting fluid. Spray the wasp with that if it don't kill them they will be to high to care. But I'm pretty sure they will go to sleep. 😃👍

[@jamesleejr1626]

Yes fix the big piece of equipment make her move again.

[@glennjukes5581]

Would love yto see finish working on this machine--and get it running.

[@davida.p.9911]

Yeah! Let's do this! See, I got my wrench 👉🔧😀

[@HamiltonvilleFarm]

😁👍

[@jsimm4587]

Great !!!! Just watched the 310 end for the 4th time been wondering when something else came out !!!! ✋

[@HamiltonvilleFarm]

Right on.

[@dregenius]

Surprised to see him doing up the battery terminals like that... if you connect the positive first, you don't have to worry about your wrench shorting out on the chassis. ;) Similarly, when disconnecting, do the negative first.

[@jsimm4587]

Starting fluid works real well on bees to , very well !!!

[@noonerstrickland1743]

Great job fellas! I think Hamiltonville Farm has a new Master Mechanic 😎

[@HamiltonvilleFarm]

⚡TCB⚡

[@dans_Learning_Curve]

Yes, video on replacing the pump!

[@RickyVentures]

Hello from Minnesota. Looks like a small leak. :)

[@HamiltonvilleFarm]

😂

[@adamf9000]

would be cool too see it get it moving

[@mischef18]

I say yes to everything bro, sure great it was able to be fired up too. Ya make a great team no matter who your offsider is and also good the owner want's it all ready to work again. Actually just watched Chris's video before this. Safe travels

[@donaldburkhard7932]

Spray some starter fluid on wasp nest then light it.

[@ronaldunderwood4353]

The starter might be froze up, and then again I could be wrong, but when a piece has been parked for 10 years or better it needs going over from steam to stern

[@darrellroeters4951]

The machine is laid out well for working on.

[@c.w.hughey2728]

Every time you guys go too start something take wasp spray with you.

[@RevStoration]

Bigun' ain't play around.. awesome video!

[@HamiltonvilleFarm]

Thanks brother!

[@dennisdelk4298]

Let us see it repaired and usable. Thanks for the video.

[@mtbslacker3588]

If one of the pumps are bad you should be missing half the functions. At least that's how Caterpillars work. You got my vote for a pump repair/replace video!

[@randalljames1]

sounded like it was cavitating.. lousy feed or silly low on oil

[@76Auto]

2:14 is that a Samsung excavator

[@wildefox1478]

That's great you got that excavator running and the owner wants it fixed and put it back to work, please do a video on replacing the pump.

[@joeromanak8797]

Well one thing y’all doin wrong is usin that SAE crescent wrench on korean equipment. Get ya a metric adjustable for these kinda jobs, things’ll go a lot smoother. You know ya wanna change out that pump n make er run higher and jump faster, and ya know ya wanna record it and ya know we wanna see it so put this here makin it sound like it’s a decision aside and get on with the job! 😎👍👀

[@HamiltonvilleFarm]

😂

[@ryanmanuel1763]

Definitely buy it and fix it!!!!! Bring it home!

[@stuartkarshagen6274]

So much action in this video 🤣, wasps,wrenches and victory. Great video,hope you continue filming until it's working again. Keep in keeping on🤙🏻

[@johnking8679]

Onwards and Upwards, my friend !!

[@roosthrower]

The old girl started pretty easy. Motor sounds great. That pump sure sounds crook. Definetely needa alot of coin spent on it. Look forward to seeing the old girl move and more problems that will flower

[@HamiltonvilleFarm]

Thanks!

[@99iwaena]

2.5 hrs. from your baseyard, that is some distance to travel, but changing that pump would be even nicer and to video tape it!

[@glennfryer1539]

I always check the tag on the alternator.. 12 - 24 volt

[@wiserman100]

Did anyone check the hydraulic fluid level before the hose broke?

[@sinuwijaya2466]

Aq sangat banget konten menghidupkan alat alat berat salam dari Indonesia

[@georgelawton9075]

To find what voltage any engine is. Look at the tag on the starter.😊

[@rosco4659]

That pump might be ok if you fill the hydraulic oil up, it just sounds starved of oil imo. Keep up the good work guys!!

[@HamiltonvilleFarm]

Thanks for watching

[@jamesarwood1104]

If your going to fix it, fix it right.

[@HomesteadJay]

I didnt realize I missed this video! What a gem sitting out there!

[@HamiltonvilleFarm]

Yea sir. Glad you came back and caught it

[@jackjacke4654]

How yall doin. Jesse Muller has one of these and he also has a parts one. Gotta look him up on here if you want to reach out and see if he wants to sell any parts to yall. Just spreading the love. Appreciate cha! Jack

[@HamiltonvilleFarm]

Thanks Jack

[@bmacd2112]

That Crescent is a 3 in 1 tool. A West Virginia Fitz-All Wrench, Crescent Hammer and Swedish Nut Lathe, all in one. What more could you possible need?

[@martineastburn3679]

Man there is a lot of space around that machine ! I bet it is a 24V machine as the jumper between batteries is in the front track next to the tray ! [ Guess at 10:21]

[@ronfrance4041]

How’s he get away with banging that crescent wrench off the metal when tightening the positive? I have seen it a time or two where the paints insulation value was the only thing that saved someone haha

[@frazzledude]

It is best to connect and tighten the positive terminal first. That way, if the wrench happens to touch part of the metal chassis there will be no short circuit because the negative terminal is still not connected to the battery. Then when the negative terminal is finally connected it doesn’t matter if the wrench touches the frame because the negative terminal is connected to ground anyway.

[@ronfrance4041]

@@frazzledude that’s usually how I do it in machinery but I’m pretty sure he already had the negative on