Hand Cut Roof Lakeshore roof part 1

Onward and upward. Walls are framed, everything is braced, next step is to start framing the roof. Since this is a hand cut (e.g. no trusses but all rafters), the first step is to set all supporting beams, and install ceiling joists and ridges.
Lots of big glulams that are far to heavy for the two of us to lift and set. Good thing we've got the equipment. The Ingersoll Rand 1056 (2002) is a beast. Add to that a swing carriage and truss jib and we can set beams from the front yard all the way over and to the back of the house.
Thanks for watching.
Please remember, I’m not showing the best way of doing something, just what works well for us.
Oh if you use a drone for commercial work, you need to be part107 certified. Commercial work includes social media like KZbin if you plan to make an income off of that. I watched a video about this last May and then purchased the Part 107 Course sso.teachable.... I studied and learned for 1 month and then took my test. I scored a 95%, which is a testament to how good Greg and the crew over there teach. That link will save you $100 off the course and support this channel.
website www.awesomefra...
Instagram / awesomeframers
/ awesomeframers
www.jlconline....
www.bigfootsaws...
Company pioneerbuilder...
ISOtunes Bluetooth Hearing Protection - bit.ly/Timmy10 (10% off code: Timmy10)
AwesomeFramers hat or anything Truewerk 15% off (use Timmy 15 if the link doesn't show the discount. truewerk.com/c...
Check out AwesomeFramers Logo! tspr.ng/c/new-...
#building #construction #framing
0HEKREHMXQR21QKE
XLUKRN9P0NPEV5GT

[@claytonpena4440]

I like knowing that there’s other framers that work in in the rain, that shows who really wants to bang walls

[@T.E.P.]

You guys do a fantastic job with these vids ..... outstanding!

[@joegrimes6485]

That fork attachment is sweet .

[@travismassengale3743]

Most educational you tube channel by far. I have been learning from Tim since reading articles in tools of the trade magazines.

[@davidmadill9268]

Hi Tim, thanks for posting these videos. My brother and I are a two man crew. It's good to see the progress you and Kyle can make in a day!

[@MadeByMe2023]

Nice job guys

[@disklamer]

Great work, quite the puzzle for that complex roof, it’s a nice challenge for sure. To my (Dutch) eyes the approach seems a bit counterintuitive though. Not a criticism, just an observation of how many different methods exist, which I personally find fascinating. We would lay out the heavy framing outline and roof beams first, then fill in the walls. The construction pov logic being you start with the heaviest/load bearing elements to set out the critical dimensions. There is otherwise no intrinsic structural or quality difference.

[@TheJl272]

Been a longtime subscriber, love the content! Could you consider doing a saw horse building tutorial video. Ive never seen saw horses like the ones you use.

[@AwesomeFramers]

jackasssawhorse.com/ Ed designed them and sells the pattern. Well worth it

[@saulmoreno3252]

I'm down a week waiting for trusses.... im just across the cascades... put in coach!!!

[@AwesomeFramers]

Where you at?

[@saulmoreno3252]

@@AwesomeFramers central Wa, just over the hill. Come on over we got some good wine and awesome breweries.

[@AwesomeFramers]

@@saulmoreno3252 suggestions for breweries?

[@darrellhoekstra8514]

nice edit Tim. Keep it up.

[@timothyschumann]

Well hello fellow Tim, fancy seeing you here! Hope you didn't have too much trouble from Sunday, those winds were something else.

[@AwesomeFramers]

Not too much trouble. Though the very first gust of wind (breeze) knocked a tree down in my back yard. Dead tree.

[@nathang.1561]

I remember being shocked that STP werent from Seattle. They sure did their best to sound like it

[@AwesomeFramers]

right? At the time we all thought Weiland was just copying Vedder, but nope

[@stefboulas]

Great work! You guys make it look so easy and organized. Could you do a video on the sawhorses?

[@justindavis4938]

I wonder if you could add a union orifice in the hydraulic lines to slow the flow and get more control?

[@mattpotter2148]

You can put in a restrictor in the hose to slow the response

[@AwesomeFramers]

I'll look into that, thanks!

[@brettgallagher259]

Those overhangs /. Ladders are just hanging off the gables ?

[@coldsmokepwrstroke]

Do you guys prefer to work just the two of you? I’ve seen guys come and go over the years. Been following you guys for like 18 years

[@armandonunez9005]

You guys have a bunch of tools and equipment set up, do you set all that up and pick it up everyday? I know out here in NoDak we can leave a table in the house full of fasteners and materials and it is safe, obviously we never leave tools

[@AwesomeFramers]

A lot of it stays out. No tools, but all the little stuff

[@perryrandhawa7245]

you are really awesome! ;)

[@rubenvarela4077]

Nice

[@skliros9235]

Good video, but lower the music, or get rid of it all together! That swing jib is pretty cool.

[@AwesomeFramers]

I thought the music was low. I set it way lower than other videos. I'll check it

[@T.E.P.]

@@AwesomeFramers the music level is not too bad if you raise the volume of your voice over .... still prefer zero music during voice over and music mostly over the building footage ... superb work and glad to have found your channel.

[@AG-kw7kw]

How do you transport the telehandler? Pay someone to transport it or haul yourself? Just a framer/builder wannabe asking.

[@AwesomeFramers]

The excavating contractor does it for us

[@AG-kw7kw]

@@AwesomeFramers Thank you sir! Wish you did a Q&A! Many questions like how do you stay competitive in regards to pricing when everyone subcontracts to cheap labor and what is your exit strategy?

[@manofausagain]

Do you use the zip sheeting to square up your walls?

[@chrismccue4515]

If you have over hang only way 23 qaurter works is if burn overhang.

[@manofausagain]

Use a shackle on each end of the sling to hold the choke. You won't need to reach the hook then!!

[@chriskleymann1382]

Am I wrong or do screws have the same shear strength as hanger nails? I was always told screws are a no no

[@AwesomeFramers]

general purpose screws are a no go. But Strong-Tie has a screw made for hangers that is code listed and tested & approved. These screws in the rafters are also code listed and made by the same company that makes the hardware, Strong-Tie. So it comes down to the how the screw is made and its rating.

[@aspees]

The statement is wrong in general. Its not specific. People confuse brittle screws snapping back & forth with low shear strength. That is false. Think about a regular bolt vs a grade 8. The grade 8 is made from better steel and is heat treated. They are brittle and will snap. The difference is the shear & tensile strength of a grade 8 is double that of a grade 2. Nails are soft and ductile they have low tensile strength and therefore low shear strength. If you think about a joist hanger the reason for all of the nails is not shear strength. The wood will shear long before the nails. The extreme number of nails are preventing withdrawal. Screws are orders of magnitude better in withdrawl that's why you can use less of the correct screws. The wiggle test is not a demonstration of shear strength. You are work hardening the metal until it gets brittle enough to snap.

[@kaseyrathke164]

What brand is your truss jib?

[@AwesomeFramers]

cornerstone-industries.com/home.html

[@joshuawilson1989]

2 things... How the hell did you stretch that tape measure 14 ft.. And those Louisville ladders tripod style .. I need those..

[@AwesomeFramers]

That milwaukee wide blade tape is pretty perfect

[@joshuawilson1989]

@@AwesomeFramers 30fts tape and those Louisville ladders ?

[@rogerhodges7656]

I like your videos but I hate seeing that beam sitting on the steel strap. It will continue to settle until settle until the wood is compressed. The threads on the Simpson StrongTie screwthreads will delay the settling even more.

[@AwesomeFramers]

Your concerns are unfounded. We use KD lumber, dry the house to low moisture content before drywall. Running straps this way has been a common engineering detail for decades. I think a often times we have reactions to things that don't ultimately prove to be a problem. The wood isn't going to compress like you think it will. Do you have some pictures or references that show this is a concern in real life? I hope I didn't come across snarky, that isn't my intention.

[@rogerhodges7656]

​@@AwesomeFramers After setting the beam, you can see that it is raised on the straps. At 5:41 and 5:53 you can see that the screws do not pull the beam down and the beam is approximately 1/8" above the plate. At some time in the future, based on load, weight, gravity and settlement, that beam will be sitting solidly on the plate. Over decades in the trades, clear evidence of settlement is most often seen in the compressed and broken drywall joints at multistory stairwells. It may be less evident in this single story structue but it will happen.

[@PerkBuilders]

Put a couple shims in there in the next video and everyone can breathe a big sigh of relief 🥲

[@AwesomeFramers]

@@rogerhodges7656 as I said in the video, the beam has a camber and the actually bearing point is to the right. These SDWC screws won't pull things tight, they are for uplift. I appreciate your response and concern. I respectfully disagree, but hey we are probably both wrong 😂😂

[@masterkief2394]

Where's your apprentice?

[@skliros9235]

He mentioned he started his own business

[@masterkief2394]

@@skliros9235 when?

[@skliros9235]

@@masterkief2394 9:50

[@masterkief2394]

@@skliros9235 thanks don't know how I missed that

[@pauldavies7251]

Why don't Americans use scaffolding 🙈 or a proper crane!

[@AwesomeFramers]

Scaffolding can cost 10k on average to the price of already extremely high housing prices. I wish everyone here was required to. The forklift does what a crane does at a fraction of the cost and greater versatility.

[@pauldavies7251]

@@AwesomeFramers there's absolutely zero chance of building a house in the UK without the correct health & safety in place, It's a criminal offence here!

[@AwesomeFramers]

@@pauldavies7251 yeah, here they try and enforce fall protection, but in residential almost no one uses it. We use a combination of guard rails and harnesses.

[@aspees]

@@pauldavies7251 Same in Australia. The houses are all skaffed.

[@Iancad1]

Because Americans still have full testicular ampacity and more common sense than we pansified Brits.

[@Kraber50]

Diese Helmkamera geht einem auf die Nerven, unruhiger Mist. This helmet camera gets on your nerves, restless crap.