Handmade Three Wheeler Super Cub Engine 50CC

[@patrickregan7163]

100 years ago, there were tinkerers like this everywhere. Thats how we got the Wright Bros and Harley Davidson. Fantastic work for a team, let alone one person.

[@phunkstar7347]

And now. Where is your license, your papers, the registration ? You can't drive that on the street. What if a kid bums into you with your sharp corners on the front. Here is your fine and in the next days you'll get the notification of a criminal complaint. the "car" is also confiscated. Fine payment over 5000 dollars. 100 years ago... police" ´what a nice car, how many cylinders? whats the max speed? Most impotent question, can i drive? `

[@DaSpineLessFish]

@@phunkstar7347 Exactly this, there's so muh red tape around literally anything is suffocating for any creativity or innovation from low down to permeate.

[@johnedwards1685]

Lovely machine. Not far removed from early Morgans. Thank you so much for showing us.

[@willtec6993]

凄く格好いいです。構造も加工技術も素晴らしいです。仕上がりも綺麗だし目を奪われます。走りも楽しそうですね。

[@georgeclements2742]

That looks like a real fun vehicle and I love the way you use very old and modern tools to do the construction. Thank you for a very enjoyable video.

[@ivy7642]

I have always dreamed of doing something like this, so very wonderful, I love it! I want to make my own now!

[@4saken404]

Yeah I've always wanted something like a 3 wheeled Morgan ever since I laid eyes on one! But somehow it never occurred to me to try to make one that's 50cc and thus legally considered a moped!

[@henkholdingastate]

Buth how to get it street legal

[@jiji-ys2kz]

改めて、物作りが楽しいことを再認識しました。 これからも頑張ってください。

[@大重太郎]

伝統のスリーホイラースタイルがカッコいいですね！RRにエンジンを置けば軽量化の余地はあったとは思うが、FRにすることは「斯くあるべし」という主張を感じました

[@p1981xe428]

作業中に流行りのBGMをかけてないところにも職人にこだわりを感じますよね 音を聞け音を的な

[@1islam1]

@@p1981xe428 幸せな人生をお祈りします……ありがとう 🔴ムスリムは創造主である唯一の真の神へ従う者だ 🔵我々は唯一の御方、創造主、真実の神（アッラー）のみを崇拝しなければならない。 🔴者を援助、食物を与え、支えるように勧めている。 🔵イスラームは、人種や肌の色や国籍に関わらず全ての人間は平等であると教えている。 🔴イスラームとは唯一の真の神であり創造主へと従うという意味だ。 🔵ムハンマドは40歳になった時に、天使ガブリエルを通じて啓示を受けた。 🔴預言者ムハンマドは述べた。「もし、ある男がイエスを信じ、私（ムハンマド）を信じるなら、彼は二倍の報酬を得るだろう。」 🔵イスラームは私達の両親と高齢者を敬い、気に掛けるように命じている。 🔴彼は人種、肌の色または国籍に関わらず全ての人間は平等であると言う。 🔵し主の許しを乞うこと。己を愛するように人を愛すこと。 🔴全体を異教と偶像崇拝から、唯一の神（アッラー）へのタウヒードと従順へと変えた 🔵イスラームは弱者、貧者、困窮者や障がい者を援助、食物を与え、支えるように訴えている。

[@TheJosesantiago123]

Cool, excellent work. Greetings from USA.

[@DEZ-hn6xo]

スリーホイラーは元々バイク用空冷エンジンを使うから最前部に配置するFRが基本だ

[@protogen69]

Сразу видно умелого человека, который знает что и как делать. Моё уважение. Очень хороший агрегат получился

[@timurmurzabekov3821]

Хорошо что в Японии разрешают регистрации данных самоделок🤝

[@Daruma_manzyuu]

できるだけカブのパーツ使ってるのセンスの良さを感じる

[@いなばたかひこ]

こういう遊び心満載の乗り物良いなぁ。憧れる。

[@toboldygo5823]

I have the upmost respect for a man that works with his hands and gets things done😎👍🏻✨

[@Unfunny_Username_389]

Ed Gein, for instance.

[@realzme12]

Most of the tech tools is for the silly

[@mikeanderson2730]

Love yuor devotion, and this is a really cool project! The design reminds of the morgan 3-wheeler but in half size. Good choice of engine, parts are available every where. There is only one thing i would have made differently: put 2 middle axels for the chain so it can run in the frame instead of stealing 30% of your seat. And perhaps move the fastening point for the gearlever up 10cm, gives you much faster and more precise gearchanges.

[@oisanwhite2374]

夢と楽しさが有る乗り物ですね。走行映像がまた素晴らしいです。

[@ぉヴぇ44]

ゴムタイヤつけたままガス加工とかすごい好き

[@急行智頭]

おしゃれな動画ありがとうございます。サクラのなか真っ直ぐな道を走り抜ける。山越えてよく走りに行きました、いい所ですよね。

[@ZEROC_L]

動画のいちばん初めを目にして、CGTVのオープニングが新しくなったんだと驚きました。 それにしてもこういうマシンを作り上げる技術もさることながら、映像美も素晴らしい。海外の方が多く感想を寄せられているのも分かる気がします。 これからも頑張ってください！

[@六角ボルトデグーの生活]

技術があるってつらやましいです。自分好きなものに乗れる。😭

[@brentneves3602]

Love this machine, very well built

[@carlmorgan8452]

I want

[@numberq1134]

I don't know any Japanese, but this is really impressive! Like, you got a nice workshop set up going on there! Also, nice cherry blossoms!

[@田中喜仁]

素晴らしい😂 技術も、根気も、発想も お父さん、兎に角、素晴らしい。

[@rancidpitts8243]

I learned Sheet metal working in my youth. I can truly imagine the work involved in the Body panels. I am impressed.

[@mitsurumorita2572]

カブのパーツが随所に流用されてるのが良いですな〜

[@backo62]

PERFECT!!!! What I loved most was the engine in the right position: in the front!!!! It looks like the 20's english cycle cars!!! Aurelio from Brazil

[@ptonpc]

Hello from Scotland! That is a great build. I hope you have lots of fun with it. We have lots of cherry blossom trees here too.

[@barrybegley5379]

A TRUE Creative Craftsman. Brings back fond memories to watch this fun video. Greetings from Ontario, Canada.

[@douglundy5755]

awesome design/craftsmanship! But drum brakes? Okay..Love it! 3 months? That is Amazing time!

[@АлександрНазаров-и5у]

Уважение мастеру!😊. Руки золотые

[@al20031]

Really enjoyed this. I have a 2018 Honda Super Cub 50. Wonderful engine

[@mikekemsley1531]

Nice fabricating. You know your stuff. Love watching this. One of the best parts is that you don't have the camera stuffed in your face.

[@UsmanMehmood661]

Amazing work, love from Pakistan 🇵🇰

[@donnervogel0187]

これはとても素晴らしいです、私は完全に感銘を受けました。

[@stevendaleschmitt]

Keep it slow - stick welds and eyeball construction do not lend well to high speeds. What a great project! I've been thinking of building a trike myself with and e-bike kit.

[@eweunkettles8207]

stick welds done by a pro welder are strong ive seen some realy bad mig and tig by amatuer welders i reckon perhaps there training consisted of sleeping with a welder to get info and trade secrets , sort off like American secret agents

[@鮫梨]

タイヤやブレーキ、サスペンションをちゃんとカブのやつ使ってるのこだわりがスゴイ！ こんな人が父親だったら良かったのになあ〜

[@DetroitMicroSound]

Sure would love to see you do another car...

[@davidholmgren659]

Absolutely fantastic creation. Inspiring construction and a creative design the has a nostalgic look. Well done...great video.😊

[@carforumwanker]

a nice 4 stroke 125 engine would be fun ! This guy needs his own TV show

[@jerrydc818]

With almost basic tools, you’ve made a fun machine at a fraction of the price of a Morgan three wheeler. Love it!

[@billharrison3174]

Basic tools, mig welder, tig welder, nice lathe, shrinker/stretcher, english wheel, panel beaters gear used everyday, hardly basic. Basic would be an axe and a big hammer, maybe a 18 " crescent spanner.

[@rotfai45mm]

The old Mr. Honda would think your tiny car is great !

[@powerpower4052]

楽しく拝見させていただきました、ありがとうございます。

[@dory-channel]

インスタカメラ早速使いこなしてますねー😆 映像がかっこいい！ 真似したいけど無理です😭 しかし本当に時間かかってるのがよく分かる動画でした😅 それをこの短さにするのもまた難しいと思いますね😣

[@grumpyjay215]

Thank you for making this video. I enjoyed it. Great work. Looks like a lot of fun. 👍🏻

[@huntingtonbeachsasquatch]

Freeze and Look @ 10:52 Beautiful Work and Craftsmanship!.....

[@phil6506]

I like those triumph and volocette engines on the shelf. maybe you could use one in your next build.

[@DFX2KX]

This little thing looks like fun! Here in the states, vehicles like this are still considered motorcycles, so they've got all of the benefits of being cheap to plate and insure. However, you could use this during winter as long as you bundle up, ice isn't nearly as dangerous with a trike. I'm quite surprised you don't see more vehicles like this over here. If I had the shop or knew of a makerspace large enough I'd make one.

[@cujoedaman]

You don't see more of these because Americans as a whole are stupid and would rather buy massive trucks that get 15MPG, then complain about gas prices or get suckered into the EV market scam because they're led to believe that it's somehow better for the environment. I have my truck, gets 15MPG (no longer my daily driver), but I also own a 2000 Saturn SL1 that gets nearly 34MPG and I just got my own 2022 Honda Super Cub that gets 100-120MPG, so I'm regressing :D

[@DFX2KX]

@@cujoedaman EVs aren't bad for the enviroment *if you take care of them*, not thrashing them on the drag strip so you ruin the pack. EVs are, however, often quite expensive. It is *really* hard to beat a small-displacement motorbike for pure fuel economy though. A small EV driven like a granny will beat it, but most folks wouldn't drive one like that. My E-Bicycle is 300+ MPGe, but that comes at the cost of top speed.

[@マッドハッター-q1s]

めっちゃくちゃかっこいいですね！

[@davidaustin2172]

That is TOTALLY AMAZING! Shame you put the music on instead of the sound of the engine! Well done you. 👍

[@Sohave]

This is awsome DIY Morgan!

[@DetroitMicroSound]

Every time I see your Super Cub reverse trike cycle car, I am more impressed. You are still refining it, which like all great cars in history... making it right, takes time, and passion. 😎👍❤

[@dennisyoung4631]

Displacement of the engine? 50cc? Isn’t that a bit small for this kind of vehicle?

[@TheLastCrankers]

Wow, this car must be so much fun, I love it!

[@malcolmcarter1726]

This is one of the coolest projects Ive seen yet. The evergreen C 50 (or C 90) motor. You live in a very beautiful part of the world sir. Great video.

[@jimmy_jamesjams_a_lot4171]

Independent front wheel suspension. One rear wheel driving it means no need for complicated differential. Looks like fun. THANK YOU FOR SHARING THIS!!

[@G58]

Finished in time for the cherry blossoms! Perfect.

[@deanedeane4318]

Wow that is a thing of "raw beauty" what an awesome machine you built !!!! You better hide the keys from your family !!! I'm hopeful you'll find a v-twin bike that needs chopping up one day !!! Luvz from New Zealand 😎

[@laladog3]

MORIさぁ～んのスキルは半端ないなぁ～ん♡

[@dwaynewestley7648]

That’s awesome ! Great job ! 👏🏻👏🏻👏🏻😊👍🏻

[@deanmarskell1518]

Amazing work great video ingenious like many other comments looks like an early Morgan well built sir ♥️

[@philipkaegi2911]

thats realy cool build. i love it, i would have one like that any day

[@AH-td2ho]

Wow this is amazing, Guess replacing te 55 cc engine with a hub motor would make an amazing trike

[@rayfoster6980]

I salute taking an idea to completion, all things considered I am quite impressed. I did get a chuckle about the rear foot pegs on the swing arm.

[@getterwolf1025]

コレ作ったの⁉️ スゲーな‼️ オレは技術がなくって出来そうもないから、羨ましいなあ。 人生が豊かになるよね。 本当にすごく楽しそうで良いな🙂👍👍👍

[@nigelbeaumont1109]

Fantastic Machine. I’m surprised you didn’t Tig all the welding!

[@chrisanderson6611]

You have many nice tools. Great job on the trike.

[@toboldygo5823]

What a beautiful machine you’re making very nice my friend😌👍🏻✨❤️

[@bedandbreakfastmanarin1424]

Complimenti..splendido lavoro..dimostri molta fantasia nel tuo lavoro..un saluto dall' Italia..ciao. Maurizio

[@gorgosanma]

It looks really fun to drive. Very ingenious!

[@G58]

Now go for a speed record. Put a C90 engine in it 👀😜😎🧐 Great project. Thank you for sharing. Peace

[@teddyhammack2195]

Pretty little car hope you make mini of them and be proud of your work on making them.

[@PepOch79]

Nice project with the indestructible and mythical C90 ! Regards from Argentina.

[@blacksquirrel4008]

Well done! And Thank you for showing all the solutions you came up with to solve the problems.

[@musherX]

This is happiness. Thank you for showing us.

[@valdirxavier6355]

Muito criativo! Ficou uma obra de arte!👏👏👏👏🇧🇷

[@IanMathiasen]

Very nice work. True oldschool craftmanship.

[@robinwells8879]

So many engineering talents! A thing of great beauty. 👍👏

[@篠原英利]

素晴らしい！本物の職人の仕事を見た！

[@daos3300]

very cute. and fantastic workshop.

[@haraldpettersen3649]

Great work, nice little car

[@patrickbisson9588]

Excellent, travail créatif et très bien réussi, bravo !

[@rauladriazola8127]

Bellísimo. Saludos desde Mendoza, Argentina!

[@river.presentation]

もうただただ脱帽です。

[@jerrybailey5797]

Wow that is brilliant . I used to own a Honda C50 and a C70 . what a fantastic idea 💡 👏 👌

[@CurtisDrew1]

I'll bet your son can't wait until he gets big enough to drive it. Great job, but can't understand why you stick welded the frame when you have a TIG welder at your disposal. I've been thinking of building a 2 wheel enclosed scooter, LIke the one Malcom Newell built years ago in England, but I plan on using a 650 cc Burgman for the project. I noticed what looks like a bunch of ZAP or Jawa motorcycle engines on your shelf. (Speedway motorcycle egnines)

[@citizen8650]

Electric cars.... you can keep them! Honda C90 is the way of the future, many respects "H"

[@ewanbaxter9199]

The most amazing part is it is powered with a 50cc engine.

[@13ガンシップ]

素晴らしい！ モーガンには手が出ませんが、コレなら。。。 ホンダエンジンだし。

[@IvanMectin]

Great job, nice skills 👍

[@felixcat9318]

Very neat project, truly excellent skills. The one thing that bothers me is the extraordinarily long chain length!

[@andrisiamto6943]

Great job Mori san👍

[@yamasa0607]

ただすごい☺︎ AndrewAPのBGMもすてき

[@adamdavenport1004]

wow that’s a really awesome looking car because it reminds me of the worlds fastest Indian

[@masoudkatiba1484]

The best piece of engineering, I like it😉😉

[@drn6073]

Brilliant build lovely little car a pleasure to watch 😍👍

[@13699111]

Great project and I love moped scooters !!!

[@timmytom]

Just brilliant. I love what you have built. Thank you for sharing.

[@JB-yn4cs]

Fantastic work - very skilled in many ways.

[@jacks6423]

Sensational! Cheers from across an ocean 🇺🇲🤙🏻

[@mariomuramatsu3091]

素晴らしい建築おめでとうございます。

[@delcat8168]

Excellent... lovely to see the whole family enjoying it!

[@alexanderkevenaar5500]

Cool bud i dont no for what bud super cool!!!. Love the Storing Wiel

[@keithmoore5224]

A mini morgan love it my uncle had a bsa 3 wheeler i use to have side car outfits uk citeson reterd thialand

[@clivehaynes2183]

Love it and not a computer in sight no cad/cam or cnc, great.

[@PedroPedro-jm4lk]

Pure Genius. Enjoyabel to watch you achieve this. If I was offered money to buy a Porche, I would refuse, but if given the opportunity to work with you and learn with you, I would. Also, lovely old world tools....the best. Thank you.